I can find the optical drive driver. What to do if you get a "Required media driver not found" error when installing Windows

All tips

When trying to install Windows 10 or 8 on your computer/laptop, you may receive an error not found required driver carrier. This could be a driver for a DVD drive, USB drive, or hard drive; The required driver for the floppy drive was not found optical disks. If you have a floppy disk, CD, DVD or USB flash drive with the driver, insert this media. Since Microsoft does not like to complicate its life by trying to explain in more detail the cause of the failure, a novice user may assume that the installer is swearing at the hard drive or SSD where the installation is performed directly operating system. In most of these cases, it's not them at all. If you've encountered any of the above-mentioned errors, this guide will help you sort them out.

Below is a list of methods to help you figure out how to fix error The required media driver was not found.

The reason this error appears during the installation of Windows 8/8.1 from a flash drive is that the OS installer does not support USB 3.0 drivers.
Failure during preparation for Windows installation 10 or 8 followed by the appearance of an error may occur due to a damaged DVD disc, a long interval between periods of its use, or due to a drive failure. In this case, you should try installing Windows from a flash drive.
In some cases, the error The required driver for the optical drive was not found appears when installing a system with bootable usb drive, created third party software. To fix the bug, just write the OS installation files to removable media using another program from the instructions.
If you suspect that the USB drive is faulty, you should replace it with another one. If it is fully working, but an error still appears during installation, then you can try.
Another cause of failure during preparation for OS installation is a damaged Windows ISO image. In this situation, you need to re-download the file and create a bootable drive. More details about this are written in a separate manual.

Root cause of error: Required media driver not found when installing Windows 8

Because Windows installer 8 and 8.1 do not support USB 3.0 drivers; when installing the OS from a flash drive connected to the port of this version or simply supporting this specification, the error The required media driver was not found appears. You can eliminate it in one of the following ways:

Connect the drive to USB port 2.0 (without blue marking).
Burn the OS image to a flash drive that supports the USB 2.0 specification.
If you don't have USB 2.0-enabled media at hand, download USB drivers 3.0 from the manufacturer's website motherboard or laptop. They may be included in the drivers for the chipset. Next, place them unpacked on the media. That is, as a folder with files in inf, sys and other formats, and not in the form installation file With exe extension. During the system installation process, click on the button Review and specify the directory containing the drivers.
Integrate USB 3.0 drivers into the Windows 8/8.1 image.

Required optical drive driver not found when installing from DVD

Most often, the culprit for the error: The required driver for optical disks was not found when preparing to install Windows from a disk is damaged media and, less often, a DVD drive that does not read it well. And it is not at all necessary that the flaws be visually visible. One way or another, you should try creating a new one boot disk Windows, or use a flash drive or separate section hard drive for system installation. You can find out using special instructions.

Using other software to burn a bootable USB drive

In some cases, a message about the absence of a media driver may appear during the installation of Windows 10 and 8 from a USB drive due to files incorrectly written to it using third party program. If an unsuccessful attempt was made to create a multiboot flash drive, you should write to removable device one edition of the system, instead of several. If you have already done this, but the error does not disappear, you should consider using another program for . For example, Rufus.

Problems with bootable USB flash drive

If the advice from the previous method does not have a positive effect, you can try to change the flash drive to another one or check the existing one for the presence of several partitions. If they are contained on it, they must be removed using the instructions.

Additional Information

Sometimes the problem may be a damaged ISO image. In such a situation, it is worth downloading it again and creating a bootable USB flash drive to install Windows. .

Hello! And again, I didn’t write anything on the blog for two days, I was busy. I bought myself a laptop, set up everything, transferred information from my old computer. Perhaps later, I’ll review the laptop, but today I’ll write about one problem that arose when installing Windows 7. An error that begins with the words “The required media driver was not found. This could be a driver for a DVD drive, USB drive, or hard drive." I think there is no need to continue further.

This was not a clean image of Windows 7, it was a build in which only the bootloader was changed. According to the author, the operating system image has not been changed. Well, if we talk about the error itself, everything is clear there, there are no drivers for the drive, USB, or HDD, accordingly, further installation of the operating system is not possible. This was the first time I encountered such an error and, like everyone else, I decided to download the drivers from the laptop disk.

At first I thought it was because I had an SDD drive, but I launched other programs on this drive, and they all found my drive. In short, it was also not possible to find drivers from the disk that came with the laptop. Even if the installer found them, they didn’t suit him. I started going through the options that could be causing this error. Moreover, Windows 7 was installed from another disk, but I needed to install this particular assembly. And then I thought that the problem might be the slightly scratched disk on which I recorded Windows 7.

I didn’t have a new, clean disk, but a friend was supposed to come to me, whom I asked to buy a disk on the way. He brought the disk, I recorded the image and launched it reinstallation and everything went smoothly, no errors, just like that.

That means all the problem was bad DVD-RW disc , but when writing an image to which no warnings appeared, and when reading files, there were no errors other than “The required media driver was not found.”

This means that if you get the error “The required media driver was not found” during the installation of Windows 7, or more specifically, after selecting a language, then you need to check the disk from which you are trying to install the OS, and if possible, burn a new one DVD-R disc. I advise you to take DVD-R, not RW. And record at low speed, but the second time I recorded the image with standard Windows tool 7. You can read more about creating bootable disks in the article.

If re-recording the operating system image did not help solve the problem, then I have a few more tips:

If you are installing Windows 7 from a flash drive, then connect it to USB 2.0, because, in pure Windows image 7 there are no drivers for USB 3.0. Or try to provide a driver for USB 3.0.
Try inserting a disk with drivers for your system into the drive and clicking on the “Browse” button, specify the path to the disk; perhaps Windows 7 really cannot find the driver it needs to install. The disk with the operating system image at the time of installing the drivers can be removed from the drive.

Well, that's all, I hope you managed to solve this error. Best wishes.

Installing Windows can sometimes be a bit of a hassle. This applies not only to new version 10, but also to the already proven software. Seven also sometimes gives out surprises that you obviously don’t expect to receive. One of these unpleasant surprises is when Windows asks for device drivers right during installation. Usually looks like similar message Thus:

The essence of the problem is clear: the operating system installation does not find the driver for the drive, so it cannot continue the process itself. If Windows does not see any devices, then a real headache begins for the average user. But the point is that when this message everything is much simpler. Exist typical solutions to get out of this situation. Just choose one of them, perhaps it will save you from such an unpleasant situation.

Crooked assembly

Today you can find it online great amount installation images. We have already discussed how to download and install such an image. On the Internet, many hobbyists post Windows versions XP, 7, 8 and 10. When downloading such virtual media, the user assumes full responsibility for the security of his computer. In most cases, nothing serious happens. It’s just that some devices or components cannot be found on the image during installation. You have to install the operating system 10 times to understand: the quality of the downloaded installation media leaves much to be desired.

Worn disk

It is extremely difficult for the drive to read files from the installation media. Optics require a smooth and clean surface. It’s no wonder that for this reason, today Windows 10 is already delivered to your computer via the Internet. Physical disks are fragile and can be easily scratched or chipped. Just one such damage can force the computer to go through the same segment for a long time. As a result, drivers for the device will not be found, and the same error will appear on the screen. Yes, that's exactly how it goes:

Poor-quality installation media may cause an error when no drivers are found during installation.

In this case, you need to use only new write-once discs for the drive. Reusable discs are more convenient for repeated use, but the recording quality on them is constantly decreasing. Considering that most users have long abandoned disks, the use of a drive during installation requires increasingly high quality media. Such devices go out of circulation, become obsolete and no longer cope with their tasks as well as their direct competitors. After all, on USB cards memory is not such an issue due to the solid state structure.

Wrong connector

Let's say Windows 7 is installed in the same way as its modern descendant version 10, via USB device. In this case, if an error occurs when the drivers are not found, we can say that the wrong connection connector is used. As strange as it may sound, the external contacts of a computer may be the same, but in their properties they can be very different. It's like Windows 7 and 10 - the principle of operation seems to be the same, but the essence is different. There are two standards USB connectors: These are USB 2.0 and USB 3.0. In short, version 3 is faster. Unfortunately, in installation image Windows 7 does not provide drivers for this standard. That's why the computer doesn't find them. In this case, we can advise you to plug in USB drive into the 2.0 slot so that installation can continue.

True message

It may also turn out that Windows 7 really reports the correct information and simply cannot find drivers for installation media. In such a situation, you should insert a disk with drivers from the components into the drive. system unit. Next, click on the Browse button and show the installation the path to the necessary files.

But, despite such problems, users still continue to use sevens. These operating systems are convenient, and all their errors have already been worked out, which has not yet been done on the 10th generation. Specific differences between versions 7 and 10, as well as .

(Visited 26,013 times, 2 visits today)

Not long ago, the new Windows 10 OS was released. Now it is very popular, because Microsoft program I tried my best this time. The OS is attractive to look at and has many advantages. And its installation does not take too much time, but it collects personal data. How to partially disable Windows surveillance 10 told.

But some problems still arise. For example, sometimes during installation a window pops up with a mysterious message: “The required media driver was not found when installing Windows 10.” What could this mean? Now we will find out everything.

Causes of the problem

There are several reasons why this problem suddenly occurs, namely:

The installation disk was removed during installation;
The optical media is not of the best quality;
The disk speed is too high;
The drive cannot read the installation optical media;
If the installation occurs using an ISO file, then it is damaged.

True, do not despair, there are several ways to solve problems.

Flash-card.

It is recommended to use a flash drive to install a new OS. Firstly, there will be no problems if the optical media suddenly turns out to be of poor quality or with high speed. Secondly, it is much more convenient and faster to do.

Creating a bootable flash drive is very easy. Read more at this link on how to create a bootable USB flash drive. You will need a flash drive, ISO file and special program called UltraISO. It is considered the most convenient utility. You can find it here: http://ultraiso.ru.softonic.com/.

Writing a flash drive takes several steps.

Then you need to run the above program. Just keep in mind that the flash drive should already be connected to your device at this moment.

Review the program carefully. IN top menu There is a "Boot" option. We will need exactly this one. There, select the item indicated in the screenshot.

In the window that appears, specify the item for the ISO file. Next, just click on the appropriate button. This process will take some time.

After all, you can try to install a new OS on your device with peace of mind using a newly created bootable USB flash drive. But it's best to connect it to USB input 2.0.

Correct disk.

If you still want to use optical media, then you need to choose it correctly. Seek help from a consultant if necessary. After all, for installation you need a high-quality disk.

In addition, you should pay attention to the recording speed. It should be low.

It is best to use DVD-R for such purposes.

Correct entry.

But choosing the right optical media is not enough. You should also burn the installation disc correctly.

We will need the same program that was used to create installation flash drive. It can also create a disk image.

Please note that before starting the operation, you should make sure that the optical media is in the drive. Only after this can you open our program.

This time you will need the "Tools" menu. Select the very first item indicated in the screenshot.

Next you just need to specify some settings. First, specify the disk volume in which the optical media is located. Secondly, the save path where you can find the created image. Thirdly, you need to choose the image format.

After all the steps, click on the “Make” button. The utility will create a disk image on its own, we just have to wait a little.

After some time, you will be able to install Windows 10 on your computer.

Thus, if an error occurs when installing “The required driver was not found...”, then the whole problem is concentrated in installation disk. All you have to do is replace it with a new one optical media or bootable flash drive. Images are created in a couple of clicks and take a couple of minutes, so don't be afraid of it.

Operating room installation Windows systems simplifies every year, and Microsoft company provides everything necessary tools, so that users can independently burn its image to a drive and carry out the installation process. During installation, you must follow the instructions that appear on the screen, but the installation does not always go smoothly, and sometimes you may encounter various errors. One of the problems that may arise when installing Windows from a flash drive or disk is the lack of the necessary driver. Depending on the Windows versions, which is being installed, various errors are displayed:

Windows 7: "The required driver for the optical drive was not found." If you have a floppy disk, CD, DVD or USB flash drive with these drivers, insert this media";
Windows 8, Windows 8.1 and Windows 10: “A required media driver was not found. This could be a driver for a DVD drive, USB drive, or hard drive."

These errors are identical and differ only in description. Accordingly, their elimination methods are also the same. Let's look at what to do if the required media driver is not found when installing Windows.

The required media driver was not found when installing from a flash drive

The most common problem that causes the “Required driver not found” error to appear is connecting a USB flash drive to the motherboard connector with USB protocol 3.0. This is due to the fact that the Windows 7 operating system installation program cannot work with the USB 3.0 connector. This problem is not relevant for installation programs for Windows 8 and Windows 10.

There are three ways to solve this problem that will allow you to install Windows 7 when you receive a message that a required driver is missing:

Required media driver not found when installing from disk

If the Windows operating system is installed from a disc - CD or DVD, then the error in question may also occur. Here the reason is also trivial - damage to the drive from which the installation is taking place. This could be a crack, scratch, chip or other defects that make the information from the disk difficult to read.

Important: This error does not depend on the version of Windows recorded on the disk, and it can occur when installing any variation of the operating system.

It is worth noting that in some cases the error “The required media driver was not found” when installing from a disk may not occur on all computers. This is most often due to the speed of the drive. By rotating the disk faster, in some cases it is possible to read information from it without errors, even if it has some damage.

To solve the problem, you will need to burn the image of the Windows operating system to another disk or flash drive.

What to do if the required media driver is not found when installing Windows

If the tips above did not help solve the problem, and an error occurs when you try to install the operating system from a flash drive or disk, we recommend trying the following steps:

It is extremely rare that an error may occur when writing data to the drive if there are problems with RAM computer. If none of the above tips help, try recording a system image from another computer.