First MacBook Air settings. Touchpad click or quiet tap

Reset Personal settings A laptop or all-in-one from Apple is possible in many cases. If your system starts to take a long time to boot, slows down during operation, the programs you need stop opening, and much more, then a reset is simply necessary. To understand how to reset your MacBook to factory settings, read our instructions.

Possible methods

First you need to determine the extent of the problem you have. There are two ways to reset the system:

1. full ;
2. Resetting system parameters to factory settings.

In many cases (for example, a system or program hangs) it is enough. Before you reset your Macbook Air, Pro, or iMac to factory settings using a reinstall, do backup copy everyone important files and programs, because this method assumes cleaning hard disk.

The second option is simpler and more loyal - reset only system parameters, but leave all the information on the disk untouched. Let's look at both options step by step.

How to restore Macbook Air, Pro, iMac to factory settings?

This the method will work if the problem with the computer is not serious and not critical. For example, a long startup time, malfunction of a program, etc. In any case, we recommend that you use this method first before proceeding with the reinstallation. To reset factory settings, follow these steps:

• turn off your macbook using any in a convenient way. You can also read about them in the next section of our website;
• hold down the key combination Command+Option+P+R+power button;
• wait until the power-up sound is played twice, then release the keys;
• After turning on, the computer will be reset to factory settings. This way you can set up your MacBook like new.

How to restore macbook air, pro, iMac to factory settings: reinstalling the OS

Before this process you need to do the following actions:

• connect the Internet to your computer;
• copy all valuable information to external storage;

• connect the device to a power source so that it does not turn off during OS installation;
• Now let's move on to the installation process:
• reboot your Macbook in a convenient way;
• During loading, press Command+R;

• wait until the computer starts recovery mode;
• in the window that opens, select “ Disk Utility»;
• select boot disk;
• go to the “Erase” section;
• select the installed OS and click the “Erase” button;

• then return to the menu with the choice of programs for recovery;
• click the “reinstall OS” button;
• After this, the computer will connect to the Internet and begin downloading the distribution.

This method will not work to restore a macbook air, pro or iMac to factory settings without an Internet connection.

After the download is complete, the device will unpack all files and reboot. Next will appear main screen with settings. Login with Apple account ID, select the system language and so on.

If you don't have internet connection then you will need bootable flash drive with the distribution. However, without an OS installer downloaded from the network, nothing will work anyway. Now you know how to reset your MacBook using two different ways and you can put them into practice.

Any computer, when turned on for the first time, regardless of the preinstalled operating system, needs a little setup and preparation for further interaction with the user. Products Apple not an exception. With a built-in installation assistant, setting up a Mac yourself is not difficult, however, not very advanced users and just beginners may need help, so let's go through all the settings point by point.

1. When you turn on your Mac for the first time, you'll be greeted with a friendly greeting and asked to choose a language. In our case, select Russian and click “Next”.
2. Next, indicate your country of residence and proceed to the next step.
3. We also select the Russian keyboard layout and move on.
4. Here we need to choose Wi-Fi network. From the proposed list of found networks, select ours wireless connection and enter the password if required.
5. At this stage, the assistant suggests restoring data from a backup copy. This only applies to those who already own a Mac and just decided to exchange old car to a new one, having previously saved the data using Time Machine. However, if this is your first Apple device and there are no backups, you can safely select “not now” and skip this step.
6. Turn on location services. Some applications require location detection, so just in case it is better to check this box, you never know which of these programs you will use in the future.
7. Apple ID. You will still need it in the future, so it is better to create it right away by clicking on the corresponding button in the lower left corner of the window. Or you can do it later and just skip this step.
8. Terms and Conditions. Well known to us Terms of use, which no one really reads. Let’s not break stereotypes and do the same: click “Accept” and move on.
9. Setting up iCloud. Within the framework of this article, we will not go into details about iCloud; if you wish, you can read in other materials. But the thing is quite useful, so check the box to configure iCloud.
10. Messages. The address is indicated here Email, where Face Time messages and calls will be sent. In short, Face Time is free audio-video calls between owners of Apple equipment.
11. iCloud to Find Mac. We check the box so that if your Mac goes missing, you can track it through the icloud.com service or from any other Apple device.
12. Computer account. There shouldn’t be any difficulties here, come up with a username and password and move on.
13. Selecting a time zone. You can check the box for automatic installation time depending on location, or set the time manually, if desired.
14. Diagnostics and use. This window appears only if OS X is pre-installed on your Mac. Everyone else will not see this message. Here you can leave everything as is, or refuse to send diagnostic data to developers.
15. Finish line. Registering the device and getting started.

Well, hello, happy owner of a brand new Mac (PRO, Air, iMac, it doesn’t matter). As I understand it, you finally jumped out of the “devil’s windows” and decided to switch to really cool technology. Well done! I did everything right.

You say you have no idea where to start getting acquainted with a new device? Don't worry, because that's why I started this conversation. Now we will go through the initial process of introducing you into the world of Apple step by step.

So the film is torn off, the box is open, now connect your brand new device to the network
(if you purchased a Mac Pro or Mac Mini then also connect the monitor, keyboard, mouse) and press the treasured power button.

Set Up Mac: Setup Assistant

The very first time you turn on your Mac, it starts up Installation assistant designed to help you, young and inexperienced, connect to the Internet, create an account and change your privacy settings (they affect applications such as Find my Friends). Now let's look at all the steps that the new Mac offers us to perform.

Step 1: Welcome

Here I took the liberty of combining the first few steps into one:

— Choose Russian as the main language;

- Point to Mother Russia and click continue;

Step 2: WiFi Network

It's simple, just enter your name and password.

Step 3: Transfer Information to This Mac

But this point applies only to those comrades who successfully sold their old Mac and bought a new one after making a backup copy of the data (thanks to the same).

And now with the help Migration Assistant they can transfer everything to the new device. But we decided at the very beginning of the article that until now you have not been tempted by Apple technology and are not one of those comrades, so feel free to select “not now” and click continue.

Step 4: Set up location service

Enabling this service can be useful when using some applications that require geolocation (I’ll say it again about Find my Friends). I think it’s better to check the box here and move on.

Step 5: Enter your Apple ID

Without this ID it will be difficult for you to survive in Apple world. You can read more about what an Apple ID is, it also says how it starts, but you need to do something a little differently, namely click create an Apple ID in the lower left corner of the window. Or you can skip this step and do it later according to the instructions in the link.

Step 6: Terms and Conditions

Did you know that Russia is the fastest reading country? Especially when we're talking about about all sorts of provisions, agreements, privacy policies and other crap. In general, don’t spoil your country’s statistics and immediately click accept. 🙂

Step 7. Set up iCloud

I'll tell you by iCloud secret this is very cool thing, thanks to this service you will always have your own cloud 5 GB. spaces in which your contacts, calendars, mail, notes, reminders, photos will be stored and automatically synchronized. And thanks relatively new feature iCloud Drive You can now store and view documents from your Mac in the cloud. Don't hesitate to check the box to set up iCloud.

Step 8: Set up Messages and Face Time

This window simply tells you to which email address messages will be sent and Face Time calls will be received.

Step 9: iCloud for Find My Mac

Also very good function but I hope you never have to use it, otherwise it will mean that your computer was stolen. But God protects the best, so check the box and if suddenly your Mac gets lost, you can track its location from any other Apple device or through the icloud.com web service.

Step 10: Create an account

Well, we finally got to the creation account, I think you won’t have any questions here. I'll give you only two pieces of advice.

Tip 1: Don’t come up with a long and complicated password; from a security point of view, this is, of course, great, but entering it every time will make you tired.

Tip 2: The first checkbox at the bottom can really help out if you forget your password, so let it be there. But about the second one, see for yourself.

Step 11: Select your time zone

You can select it manually or check the box and it will be determined automatically relative to your location.

Step 12. Diagnostics and use

This item will only appear for those lucky ones who bought a Mac with it on board. Here they offer to send diagnostics and data on computer use, as well as share information about program crashes with developers. I suggest you leave everything as is and click continue.

Step 13. Registration

And as a last resort, we are asked to register our device in order to keep abreast of all Apple news and have access to technical support. Continue!

In the last window, the Mac thanks you and suggests you quickly start using it, which you eagerly do.

Congratulations dear friend on this first Mac setup finished! Now you're dreaming, I'll stop talking about this. Dig a little into the contents of your Mac yourself. Although no, I’ll still give you a small task. Go to App Store and update software, updates probably appeared while the computer was making its way from the factory to your thirsty hands. Good luck!

After purchasing Apple equipment and installing the operating system on it, the final step remains, setting up the device. Unlike computers competing brands, this type software is different, and without experience, you can make mistakes.

Cost of MacBook setup services

Setting up a MacBook Retina	290 rub.
Settings MacBook Pro	290 rub.
Settings MacBook Air	290 rub.
MacBook setup	290 rub.

System Setup

Those who found themselves using a Mac computer for the first time and had previously only configured Windows versions or have never carried out such manipulations at all, they may encounter many incomprehensible moments. Without experience and understanding of what to do and where to set certain parameters, it is very difficult to configure the equipment and not make mistakes. It is best to apply for qualified help, where they can set all the necessary parameters depending on the user’s preferences.

When customization is required

Most often, setting up Apple equipment is necessary for people who have just purchased new gadget and do not know, or doubt their abilities, exactly how to set all the parameters correctly. Often a new device has a built-in list of functions, but they are not convenient for everyone, and for some it is important to add additional elements management. In addition, installing software without experience and knowledge can take a long time, so it is better to trust it experienced specialist. You may also need to configure settings after changing your computer's operating system.

How often should tuning be done?

Frequency similar settings directly depends on changes in the operating system. Sometimes, it is enough to spend a small amount once to configure the equipment in a reliable service center. And sometimes such manipulations are needed depending on the user who learns about new software or additional function, which he would like to connect. In any case, the cost of setup is quite low, and most often, it is much faster and better to do all the necessary manipulations with the help of a qualified specialist than to try to independently understand all the intricacies and nuances of setting up a Mac Book.

Setting up your gadget with us

Our service center provides full service for Apple equipment. We repair broken parts, install the necessary software and configure the software and other device parameters depending on the wishes of the users. Come to us and we will make your equipment work perfectly for your habits and needs. With our help, you can install programs compatible with your device, ensure comfort and convenience when using the gadget, as well as create your own unique design of the screen and the icons and items located on it, configure programs and displays various information, useful specifically for you.
If you need to set up a MacBook after purchasing or changing the operating system, then with us you can do it quickly and not very expensively. Our masters service center They will quickly and efficiently carry out all the necessary manipulations and carry out high-quality setup of your gadget.

The default settings do not always make everyday work with the operating system as convenient and efficient as possible. In this material we have collected 30 useful tips By macOS setup, which can be useful for both new and experienced Mac users.

In contact with

Steve Jobs spent a large part of his life trying to make Mac computers as easy as possible to use – but many truly useful “tricks” still remained unobvious.

1. Turn on the right mouse button and change the movement speed

By default, the right mouse button in macOS is completely disabled, which is very surprising for new Mac users, and the speed of cursor movement leaves much to be desired. In order to configure both of these parameters, go to  → System Settings… → Mouse → Select and click.

Here we put a tick next to the second item “ Simulate right button (click on the right)", and below there is a movement speed regulator, turning it to the right, we simply get the reactive speed of the cursor on the display.

By default, the Dock is located at the bottom of the display, but you can use your workspace more productively by moving the panel to the left or right side of the display. This will increase the working part of the window in many applications, for example in Safari, the width of the page is not as important as the height.

For Dock settings go to  → System settings... → Dock and in the column " Location on screen» place a dot opposite « Left" or " On right».

If at some point while working with an application you need to minimize it, then in the upper left part of the window click on yellow button between the cross and unfold. The program thumbnail will collapse to the right side of the Dock with a nice animation. But in this case, the program will not collapse into its own icon, but an additional miniature will be created. If you are not satisfied with this situation, then everything can be fixed.

Go to  → System settings... → Dock and check the box next to “ Hide a window in the Dock into a program icon».

After that, click on the button " Collapse", the thumbnail will not be created if the program icon is already in the Dock.

4. Spotlight – macOS search engine

The easiest way to do everything on Mac is faster– use Spotlight search. Just press the keyboard shortcut ⌘Cmd + Space(some may have Ctrl + Space), and you can instantly find files, open applications, search the Internet (yes, you don’t have to open the browser for this) or throughout your entire computer.

Spotlight can also be used as a calculator or currency converter. For example, enter in search bar Spotlight request “1000 usd”. The search engine will instantly display the current rate.

You can read more about search capabilities on Mac.

5. Lost your cursor?

Just quickly move your mouse left and right and look at the screen at the same time. The cursor will automatically increase in size, and it will be very difficult not to notice it. If desired, this function can be disabled ().

6. Similar to Ctrl + Alt + Delete on Mac

This combination from Windows does not work on Mac, but there is great alternative– click ⌘Cmd + ⌥Option (Alt) + Esc, and immediately gain access to a menu to forcefully close frozen programs ().

If you are looking for an analogue Task Manager from Windows on Mac, it tells you how to find it.

7. Deleting files using hotkeys

Still deleting files on your Mac by dragging them onto the icon Baskets? There is a way to do the same thing a little faster - ⌘Cmd + Delete.

8. Taking a screenshot on Mac is easier than on Windows

To take a screenshot of the entire screen, tap ⌘Cmd + ⇧Shift + 3 to select a specific area - ⌘Cmd + ⇧Shift + 4. By the way, these and many other key combinations on Mac can easily be changed “to suit you” in the settings (section Keyboard → Keyboard shortcuts).

With the exit macOS Mojave operating room Apple system For desktop computers received new tool to take screenshots.

If you don't need the shadow on the screenshots, then open Terminal (via Spotlight search or by going to Finder along the path Programs → Utilities), enter following commands and press the key Return(Enter) after each line:

defaults write com.apple.screencapture disable-shadow -bool true

killall SystemUIServer

The shadow won't bother you anymore.

P.S.: To return everything to initial position replace true on false.

9. Move app windows in the background

To move an application window that is in the background without affecting the active program window in the foreground, press the key while dragging ⌘Cmd + left button mice.

10. Startup on Mac

You can set a set of applications that will load as soon as your Mac turns on. To do this, go to the address System Settings → Users and Groups → Login Items tab and uncheck/uncheck ().

11. How to type the letter “е” if it is not indicated on the keyboard

If you need a letter "e"– just press and hold the Russian letter on the keyboard "e", and after you see the hint window, press the number on the keyboard "1".

Eat reliable way Check to see if music randomly starts playing from your Mac's speakers. To do this, just click on the sound icon in the right top corner screen (this is called the status menu, and the entire bar at the top of the screen is the menu bar). You'll see (a check mark next to the device name) whether your headphones are connected to your Mac right now.

Speaking of the menu bar, if it bothers you (for example, you don't like that it takes up valuable space on the screen), you can configure it so that it appears only when necessary. To do this, go to the address System Settings → General, and check the box next to the item Automatically hide and show menu bar .

14. How to change the arrangement of icons on the menu bar

If you want to change the arrangement of elements in the status menu, press and hold on the keyboard ⌘Cmd, and then drag the desired elements with the mouse. By the way, unnecessary elements can be deleted.

15. Split View mode, or how to quickly place two program windows on the screen at the same time

Do you need two programs at the same time to work? No problem - at the top of the window, press and hold the far right (most often green) button for 2 seconds. Select a second program from among those already open - and enjoy working in a “clean” interface without distracting details.

16. Hot Corners on Mac

Function Active angles allows you to hover your mouse over a specific corner of the screen and instantly do things like minimize all open windows, open Mission Control , Command centre or put the display into sleep mode. Tune active angles can be found in the menu of the same name ( System Settings → Mission Control).

17. Use the Viewer to view and edit images

Standard program View allows you not only to view images, but also to change the size, add comments, etc.

It can also be used to import a digital copy of your signature if you need to sign a document digitally.

18. QuickTime Player lets you record video and audio from your Mac screen without third-party apps

The built-in media player QuickTime Player has the ability to record an audio or video file that is currently playing on your screen, i.e. There is absolutely no need to look for third-party software for the same purposes ().

Starting with macOS Mojave, to record video from Mac screen There is another way that we talked about.

19. Precisely adjust volume and screen brightness

If you want to reduce the sound volume on your Mac just a little bit, press the F11 or F12 key while changing the setting ⇧Shift + ⌥Option (Alt). This will reduce the sound more slowly than with normal adjustments. Fn+F11 or F12. The same trick can be done with screen brightness ()..

21. How to rename several files at once

To rename several (for example, a dozen) files or photos at once in the Finder, select them, click right click mouse and select an option Rename objects(number of objects).

You can also create keyboard shortcuts for applications. To do this, go to System Settings, Choose a section Keyboard, Further Keyboard shortcuts.

Add the program to the list of applications (if it is not there) using the icon «+» , then enter the name of the command for which you want to assign a keyboard shortcut (it should be written exactly the same as in the program itself, including the symbols “..."). The last step is assigning a keyboard shortcut for an action in the program ().

23. Voice search using Siri

Of course, talking to your computer in public is a strange thing. But if no one bothers you, then a voice request is great way search for information on the Internet, find photos, messages and other files on your Mac. Find colorful voice icon Siri assistant(the search works through it) can be found on the right side of the menu bar.

With examples of useful Siri team on macOS can be found here.