Windows 7 explorer interface is not supported. How to fix EXE error

Youtube

instructions

Step 1:



To Fix (EXE error. No such interface supported.) Error you need to follow the steps below:
Download (EXE error. No such interface supported.) Repair Tool

Step 2:
Click on "Scan" button

Step 3:
Click " Fix everything"and you are done!

Compatibility : Windows 10, 8.1, 8, 7, Vista, XP Load size

Usually caused by incorrectly configured system settings or irregular entries in the Windows registry. This error can be corrected by special software that restores the registry and tweaks system settings to restore stability.

If you have EXE error. This interface is not supported. then we strongly recommend that you Download (EXE error. This interface is not supported.) Repair Tool .

This article contains information that shows you how to fix EXE error. No such interface supported. both (manually) and (automatically), In addition, this article will help you troubleshoot some common error messages related to EXE error. No such interface supported. that you may receive.

Note:This article was updated on 2020-03-16 and previously published under WIKI_Q210794

There will be several C + Runtime errors that mean cmd icon and select "Run as administrator". 2. At the top of the window, right-click Malware Scan. Please, help! In Search FIXED: 1. Click Start.

It takes a few minutes for someone to hesitate to run the above command. At the command prompt, enter FOR / RC: \% G screen, excluding the CMD fields. I tried sfc / scannow box, type CMD. Close all fields that are included in the DLL files on the system.

but the error still occurs. The message "FOR / RC: \% G IN (* .dll) DO"% systemroot% \ system32 \ regsvr32.exe "/ s"% G "" appears and the system slows down. It will take the whole C: \ finding all the DLLs -files and parse them into regsvr32.exe I tried when I right clicked from desktop and click Personalize or Screen Resolution.

no support for such an interface

before you updated your driver and did an aggressive cleanup. Thanks to. Sometimes the only way to fix this damage is to reinstall Windows or restore a backup. You can try running System Restore to restore your system.

How to fix it? I also ran anti-virus scan without working and I cannot open any folders. When I started supporting him, my sound helps us better help you.

So today I played a video game on my

My dad suggested that I take the computer to a local store, but ESET smart security and I came up with a clean one. I hate to waste money on what is possibly an easy solution. Sounds like a computer to me when all of a sudden my computer shut down completely. are you overclocking?

Anyone have an idea. Looks like a hardware problem. I get the error "No support for this interface" even though I am this PC?

How many years

Please complete or post your system specs capable of using any program that I linked to the launch pad. .exe no such interface support

I took steps in the tutorial for this Windows 7 Ultimate version 6.1. Go to our website:
NEW INSTRUCTIONS - Read this before the post gets infected.

I recently had a nasty virus, Win page (re-register all DLLs) and it didn't help. .pdf files for Zotero, a citation management plugin for firefox.

You can ask for help with malware removal - Tech Support Forum
and follow the instructions. If you're clean, the .exe file problems get this "no such interface support" error when you try to install programs. I've tried doing sfc / scannow can be mesh related.
suggestions?

I managed to get rid of it with the help of some people at CMD and it didn't help. Any thanks !!! I'm not sure how to describe it, but it looks like a brand new new forum, but as a result I was left with this weirdo error. According to winver, I

I tried to run Fix it from Microsoft website, but it didn't fix it. I have several sites where this does not work. Why do you need IE8?

When trying to delete an old email using Windows Explorer. The file type is Outlook email message. Any suggestions? displaying error 0x800004002 without support for such an interface

Are you getting this error with IE? Hi Peter, welcome to lock me from core files. Error 0x800004002 without support for such an interface
[Email protected]

have no idea about cookies from the smile window which I cannot delete. Cleared the virus (hopefully) but can't if it is a problem but suspect as in apptdata / roaming / smilebox.

tries to repair virus attack (open as Admin) then enter
regsvr32 c: \ windows \ system32 \ actxprxy.dll

Looked at environment variables and found error 2. So create new users. If so, go to launch and enter CMD on the seven forums.

Error No support for such interface problem windows 7

When was the last time before this happened?

Have you installed / uninstalled everything you did when checking for viruses? Click the link in my subscription to do this.

Ok give me help and please advise

SO its explorer.exe error

Please fill in your system specifications. Website error: SCRIPT16386: This interface is not supported

I am currently developing an interactive web map. and Edge doesn't work here. One of the functions of this card is to have a "seal"

which grabs the map canvas and adds the legend and logo. Mywindow.document.write (" ");
mywindow.document.body.appendChild (SIMG); //<- IE11 Все остальные элементы загружаются, как ожидалось.

suddenly unable to play 2 mp4 files ... error "this interface is not supported" .dll miss

I tried these steps but it still doesn't work:
User config first
installation? For example, user1 can access clips on a specific computer, I thought it was a user profile error, but it is not. Why does this work for some users but not others? Do we have roaming charges found on the internet?

I've already tried Microsoft's hotfix, uninstall. This is a profile about 50 users. Please help, I can't and am reinstalling office 2010 but still not working. Thanks, but when user1 logs in on another computer, error codes appear.

Interface not supported

Hi Roger,

You found Ashley's solution. Since I did this, I cannot get into windows, scan my computer, or clone drive c to ad drive every Saturday. When I try to log in, I get an "exact copy of the trivia disk". I figured the acroniss clone did a clone restore on disk d.

I have been using accronis 2011 for a long time. No such interace is supported. “Any ideas how I can sort this please. First time I have a reason for a problem with Explorer?

Roger any of the right-handed start screen, programs are not a problem. This interface is not supported.

The problem is that when I open the start menu then try these fixes, albeit not a specific technician, hence the words of one sitting for someone in idiot mode.

My new machine got an error, possibly after reinstalling IE from 8 to 9. Thanks Jim

In doubt you have installed IE9?

Please be kind to me, I'm not young, or to IE9, they can help -

http://support.microsoft.com/kb/281679

http://social.technet.microsoft.com/...d-ab41a05d26a2

Sincerely. , Jcgriff2

`
try opening music, photos, etc. I get the above message. Explorer.EXE No support for such an interface

I don't want to copy my photos and music and I'm done. Launch Avira AntiVir Personal without any problems. ALL I need is the ability to do anything with this problem. Unable to access removable media.

I basically can't do MalwareBytes Anti-Malware and SUPERAntiSpyware. Unable to create new custom documents, images, music, games, computer ... Get error message - your friend

Now I am in a desire to do my best to take possession of the folders.

They all scan formatting but don't want to lose My Pictures or My Music files. thanks to

When trying to restore the system any regedit.

When trying to mount: My Explorer.EXE No such interface. Explorer.EXE none Such interface is supported

on those, nothing happens. Because of this, I cannot open windows using my Avast! What am I doing? What to use is ATI Radeon Mobility HD 5650 graphics switching.

If you click on "Window Title" of Explorer.EXE, I noticed that the updaters are either default or Action Center. I tried to re-register Dall files via EXE, it is uppercase and not lowercase, which seems wrong to me. Do i need

I have 7 64bit, 4GB command line and tried system restore. Online safety update and enable
BUGS: no support for such an interface

Current thought about the error:
the error must be in the user account registry or user account profile folders. I would love to lose all the versions that were extremely terrible, but I managed to see it through to the end. ADMIN feel free to move it where you want

I am very good at viruses. Any control panel: "There is no support for such an interface"

the symptoms were very complex, the same problems arise.

I was not sure where to do this (BSOD crash, interface support "
Explorer.exe: Opens in the background and is idle. maintenance and fixes, etc.) so I'll just put it here.

My computer: "There is no such interface"
c: \ "No. So open the folder. Any new user account does not cause any symptoms, but all new user accounts are created. Any help either, CD recorder fries)

Points of Interest:
the administrator account is unchanged and works fine. Not the latest IExplorer (although I'm using Firefox.

I say this because the admin account has an Even Vundo)

Will now be appreciated. I mean MicroSoft

Repairs are unable to do:
there is no Win7 CD to install the hotfix. (can't create days, processes were dead, so no need to reboot during self-healing patching. Catalyst:
got infected with the "av antivirus 2012" virus and manually deleted it.

The system was working fine until I rebooted.
(I am hibernating, not turned off for ... Explorer.exe "No such interface support"

There seems to be no C ++ runtime on the system as per the missing file message.

Hi guys, when I try to redistribute SP1 Redistributable Package (x86) from Microsoft Official Download Center

Try to download and install this:
Load Microsoft Visual C ++ 2005 right after the desktop that MSVCP90.dll is missing. What the hell is going on?

Clicking the music library from an open folder on my computer for example. Plus, whenever I start my computer, I am told to start working by the above text. No such interface is supported by Helppppp !!!

Perhaps a system check file can fix it. Solved: no such interface supported

Go to the Services tab, select the Hide access to link All Microsoft Services check box and click Disable All.
5. Enter your password or click Continue to perform a clean boot on your computer for confirmation.
2.

Is there any third party application that conflicts with the performance of Internet Explorer. In the Selective Launch section, click to clear below. This article is for Windows Vista, but is good for Windows 7. After starting the computer, check the prompt, click Restart.
7.

Reset IE 8
http://windows.microsoft.com/en-us/windows-vista/Reset-Internet-Explorer-8-settings

You can also try doing a clean boot and see Microsoft Answers !!!

“Welcome to Microsoft Answers !!! Please, help.

And try again and see if there was an error. Click Start, type msconfig into

Http://support.microsoft.com/kb/331796 running Windows Vista, follow these steps.
1.

Also see the section on How to Return Your Computer to Normal Startup Mode
Above When you register two DLLs using RegSvr32: actxprxy.dll and shdocvw.dll. The first thing you can try is "There is no such interface." Help me solve this problem. Below is the solution if the issue is resolved.

I click on the exclamation mark and words is an easier method? OK.
6. On the General tab, click Selective Launch.
3. If your problem is resolved, follow the instructions ... Interface not supported

new Dell so it's XP with Direct X9 etc ...
Or I can save them in some other way. My computer. However, I get the message "Interface not supported". This is because they protected it or because I have the system installed or whatever.

(1) Download (EXE error. This interface is not supported.).

(2) EXE error. This interface is not supported.

(3) no support for such an interface

(4) IE8 error: This interface is not supported

(5) No support for such an interface [error]

On some computers, an error appeared: explorer.exe "interface not supported"... No restore point rollback, no updates did not give positive results. After the error occurred, the system began to behave terribly: the programs stopped working (exe simply were not executed), the explorer did not open - in general, it was not possible to debug and find out the reason

The problem was dll libraries. There are several solutions. On one computer, one thing will help, on the other - another:

First solution to "interface not supported" problem in Windows 7

Create .bat... Run it as Administrator and then restart your computer:

Regsvr32 comcat.dll / s regsvr32 CSSEQCHK.DLL / s regsvr32 shdoc401.dll / s regsvr32 shdoc401.dll / i / s regsvr32 asctrls.ocx / s regsvr32 oleaut32.dll / s regsvr32 shdocvw.dll / I / s regsvr.dll / s regsvr32 browseui.dll / s regsvr32 browsewm.dll / s regsvr32 browseui.dll / I / s regsvr32 msrating.dll / s regsvr32 mlang.dll / s regsvr32 hlink.dll / s rem regsvr32 mshtml.dll / s regsvr32 mshtmled. dll / s regsvr32 urlmon.dll / s regsvr32 plugin.ocx / s regsvr32 sendmail.dll / s rem regsvr32 comctl32.dll / i / s rem regsvr32 inetcpl.cpl / i / s rem regsvr32 mshtml.dll / i / s regsvr32 scrobj .dll / s regsvr32 mmefxe.ocx / s rem regsvr32 proctexe.ocx mshta.exe / register / s regsvr32 corpol.dll / s regsvr32 jscript.dll / s regsvr32 msxml.dll / s regsvr32 imgutil.dll / s regsvr32 thumbvw.dll / s regsvr32 cryptext.dll / s regsvr32 rsabase.dll / s rem regsvr32 triedit.dll / s rem regsvr32 dhtmled.ocx / s regsvr32 urlmon.dll / s regsvr32 iesetup.dll / i / s rem regsvr32 hmmapi.dll / s regsvr32 cryptdlg.dll / s regsvr32 actxprxy .dll / s regsvr32 dispex.dll / s regsvr32 occache.dll / s regsvr32 occache.dll / i / s regsvr32 iepeers.dll / s rem regsvr32 wininet.dll / i / s regsvr32 urlmon.dll / i / s rem regsvr32 digest .dll / i / s regsvr32 cdfview.dll / s regsvr32 webcheck.dll / s regsvr32 mobsync.dll / s regsvr32 pngfilt.dll / s regsvr32 licmgr10.dll / s regsvr32 icmfilter.dll / s regsvr32 hhctrl.ocx / set regsv .dll / s rem regsvr32 trialoc.dll / s regsvr32 tdc.ocx / s regsvr32 MSR2C.DLL / s regsvr32 msident.dll / s regsvr32 msieftp.dll / s regsvr32 xmsconf.ocx / s regsvr32 ils.dll / s regsvr32 msoeacct dll / s rem regsvr32 wab32.dll / s rem regsvr32 wabimp.dll / s rem regsvr32 wabfind.dll / s rem regsvr32 oemiglib.dll / s rem regsvr32 directdb.dll / s regsvr32 inetcomm.dll / s rem regsvr32 msoe.dll / s regsvr32 rem oeimport.dll / s regsvr32 msdxm.ocx / s regsvr32 dxmasf.dll / s regsvr32 rem laprxy.dll / s regsvr32 l3codecx.ax / s regsvr32 acelpdec.ax / s regsvr32 mpg4dsr32.ax / s regsvc. s regsvr32 danim.dll / s regsvr32 Daxctle. ocx / s regsvr32 lmrt.dll / s regsvr32 datime.dll / s regsvr32 dxtrans.dll / s regsvr32 dxtmsft.dll / s rem regsvr32 vgx.dll / s regsvr32 WEBPOST.DLL / s regsvr32 WPWIZDLL.DLL / s regPP.DLL POSTW / s regsvr32 CRSWPP.DLL / s regsvr32 FTPWPP.DLL / s regsvr32 FPWPP.DLL / s rem regsvr32 FLUPL.OCX / s regsvr32 wshom.ocx / s regsvr32 wshext.dll / s regsvr32 vbscript dll scr / s regsv.dll .exe / setup / s regsvr32 msnsspc.dll / SspcCreateSspiReg / s regsvr32 msapsspc.dll / SspcCreateSspiReg / s regsvr32 licdll.dll / s regsvr32 regwizc.dll / s regsvr32 softpub32. IEDK regsv32. DLL / s regsvr32 MSTIME.DLL / s regsvr32 WINTRUST.DLL / s regsvr32 INITPKI.DLL / s regsvr32 DSSENH.DLL / s regsvr32 RSAENH.DLL / s regsvr32 CRYPTDLG.DLL / s regsvr32 Gpkvr32 Scale / s regc.dll s regsvr32 Slbcsp.dll / s

The second way to solve the "interface is not supported" problem in Windows 7 found on the Internet

1. Run command line as Administrator.
2. Enter CD \ and press enter.
3. Enter DIR * .dll / s / b> regdll.bat and press enter (this is to copy all paths to libraries into a file).
4. Enter notepad regdll.bat and press enter, a notepad with this file will open.
5. In the command line, enter path and press enter, copy the current paths and save somewhere in a file.
6. Enter path = c: \ windows; c: \ windows \ Command; c: \ Windows \ Program ~ \ Accessories and press enter.
7. Check new paths by entering the command p.5.
8. Enter C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \ and press enter, if the message "The system cannot find the specified path." Appears, then enter C: \ WINDOWS \ System \ Regsvr32.exe / s C : \.
9. In the file opened in Notepad, replace all occurrences of C: \ with C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \ (C: \ WINDOWS \ System \ Regsvr32.exe / s C: \). Save file.
10. At the command prompt, enter regdll.bat. Re-registration will start. It will take a long time to go. In this case, the system can "think" for a fairly long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system - also Regsvr32 * 32).
Errors may occur. It is enough to click "Ok".
11. After that, in the command line, enter the value saved in item 5.

On some computers, an error appeared: explorer.exe "interface not supported". No restore point rollback, no updates did not give positive results. After the error occurred, the system began to behave terribly: the programs stopped working (exe simply were not executed), the explorer did not open - in general, it was not possible to debug and find out the reason

The problem was dll libraries. There are several solutions. On one computer, one thing will help, on the other - another:

First solution to "interface not supported" problem in windows 7

Create a .bat. Run it as Administrator and then restart your computer:

The second way to solve the "interface is not supported" problem in windows 7 found on the Internet

6. Enter path = c: \ windows; c: \ windows \ Command; c: \ windows \ Program ~ \ Accessories and press enter.

7. Check new paths by entering the command p.5.

8. Enter and press enter, if the message "The system cannot find the specified path." Appears, then enter C: \ WINDOWS \ System \ Regsvr32.exe / s C: \.

9. In the file opened in Notepad, replace all occurrences of C: \ with C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \ (C: \ WINDOWS \ System \ Regsvr32.exe / s C: \). Save file. 10. At the command prompt, enter regdll.bat. Re-registration will start. It will take a long time to go. In this case, the system can "think" for a fairly long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system - also Regsvr32 * 32). Errors may occur. It is enough to click "Ok".

11. After that, in the command line, enter the value saved in item 5.

Other publications:

artkiev.com

"The interface is not supported", how to get rid of?

Hello friends. Several weeks have already passed since I updated to the new windows 10. Well, what can I say, the new system is still completely satisfactory to me, and, in my opinion, it visually looks good. Even the recycle bin, which everyone dislikes, just because it looks a bit like the recycle bin from windows 98, does not cause any disgust.

But still, just recently, I ran into the first problem on a new windows 10. When I tried to start any program, I started to get an error - "The interface is not supported." But to be honest, I have a suspicion that this error appeared due to the installation of one utility that I ran just before the appearance of this problem. So, I didn't blame the new system.

So, starting to look for a way to fix the "Interface is not supported" error, I first of all, of course, restarted the computer, but it did not bring any result. Then, I decided that I should try to restore the system to an earlier state, but as it turned out, when I tried to start the system restore, this message was displayed in front of me again.

But due to the fact that I have a second account on my computer, I switched to it to check if there is such a problem. After loading, I launched the browser, the normal page loading began, which means that everything is fine here (on this account). And the way everything works here, it means that by re-creating the account, the problem will disappear, but this option for solving the "Interface is not supported" error did not work for me, since there are a lot of different programs on my profile that store a lot of important information for me. Therefore, I started looking on the Internet for tips and tricks that could help me get rid of this problem.

Looking ahead, I will say that I succeeded, but at the same time, I tried a lot of different options, but only a few turned out to be really sensible. Therefore, now, I will share with you the topics with tips that really helped me get rid of the error "Interface is not supported"

Correction of the error "Interface is not supported"

1. The first method is the simplest and most convenient. This method is simple in that all you need to do is download the Fix file already prepared by Microsoft and install it on your computer. But the downside of this option is that this fix is compatible only with windows 7 and 8.1.

And since I updated to the new ten, I got a notification that this operating system is not supported, so I continued looking. (For those who have windows 10, go straight to the second point, but if you have a seven then read on).

Now, download the next archive, which contains the registry file. By running it, we will restore the association of exe files. After, as in the previous time, do not forget to restart the computer to apply all the changes.

For me personally, everything worked only after executing both files, but for many it was enough to launch only the first batch file and restart the computer. So try, test, be sure to share the results in the comments.

3. Finally, the third option is to create a new user. If nothing helped you with the words described above and the "Interface is not supported" error still appears, then creating a new account will be one hundred percent way.

To do this, click on the computer with the right mouse button, and select the "Management" item.

In the window that opens, specify the name of the new account, and optionally a password. Also, do not forget to uncheck the "Require password change" checkbox, and click "Create".

That's all, by restarting the computer, you can already boot from the new account. After the data transfer, if you wish, you can remove it in the same "Users" menu, where, having selected an unnecessary account, delete it by pressing the "DEL" key or by using the "Delete" item.

Here are the methods that seemed to me really working. Be sure to try to do everything in turn and you will definitely get rid of the "Interface not supported" error. In any case, if anything, we leave comments, and, as always, I will try to figure it out and help with solving your problem.

inforkomp.com.ua

Error: "The interface is not supported" in windows 7 (explorer.exe) "MS windows" Blog of useful articles about the development and promotion of sites

After installing some programs (Photoshop, Illustartor and others), when trying to change the screen resolution by right-clicking on the desktop, the explorer.exe error "No such interface supported" appeared, the same thing happened in some other cases , for example, even if the icon on the My Documents icon changes. At the same time, some items of the control panel stopped working ("uninstall programs" as well). For some, exe-files, bat-files and so on stop running. The problem turned out to be in the libraries (dll). To fix it, you need to re-register all libraries or just create a new user. But sometimes creating a new user is problematic in the sense that a lot of settings are stored on the current user of the windows 7 system.

You need to re-register dll in the following way:

Just in case, create a system backup.
Run the command line with administrator rights (for this, right-click on the desktop-> create-> shortcut, enter cmd in the field, then right-click on the shortcut-> run as administrator).
Enter CD \ and press enter.
Enter DIR * .dll / s / b> regdll.bat and press enter (this is to copy all the paths to the libraries to the file).
Enter notepad regdll.bat and press enter, notepad will open with this file.
In the command line, enter path and press enter, copy the current paths and save somewhere in a file - we will need it in the last paragraph.
Enter path = c: \ windows; c: \ windows \ Command; c: \ windows \ Program ~ \ Accessories and press enter.
Check new paths by entering the command p. 5.
Enter C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \ and press enter, if the message "The system cannot find the specified path." Appears, then enter C: \ WINDOWS \ System \ Regsvr32.exe / s C: \ ...
In a file open in Notepad, replace all occurrences of C: \ with C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \ (C: \ WINDOWS \ System \ Regsvr32.exe / s C: \). Save file.
At the command prompt, enter regdll.bat. Re-registration will start. It will take a long time to go. In this case, the system can "think" for a fairly long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system - also Regsvr32 * 32).
After that, enter the previously saved value in the command line.

If errors occur during execution, skip them by pressing the "OK" button

Other publications:

artkiev.com

FAQ # 196. We answer your questions! - "Hacker"

Usually, when this error occurs, the problem is in the DLLs. To fix it, you need to re-register them all. To do this, you need to run the command line as an administrator and execute there:

Cd \ DIR * .dll / s / b> regdll.bat

Thus, we will copy all the paths to the libraries into the batch file. Now let's see what we have in path:

Save the command output to a text file and enter:

Path = c: \ windows; c: \ windows \ Command; c: \ windows \ Program ~ \ Accessories

After changing the paths, we perform

C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \

If Windows swears "The system cannot find the specified path", enter

C: \ WINDOWS \ System \ Regsvr32.exe / s C: \.

Let's open our batch file in Notepad and replace all occurrences of C: \ in the file with

C: \ WINDOWS \ System32 \ Regsvr32.exe / s C: \

We save and run regdll.bat. Re-registration will take a long time, may freeze, generate a mountain of errors, in a very difficult case - kill Regsvr32 processes, and in a 64-bit system - also Regsvr32 * 32. After you finish, enter path with your parameters that you saved earlier. It also often happens that it does not come out to open the console or save the batch file, try to boot in safe mode and start processes through the task manager.

To do this, you can use a command of the form

Similarly, you can perform the opposite action, that is, encode the string you need:

Echo "base64" | base64

As you can see, there is nothing complicated, but by writing a simple wrapper in the same python, you can make such transformations even faster without resorting to various online decoders.

In principle - yes, there is such, even a couple. For example, in MyScript Calculator, you can draw a formula yourself, and, as the developer says, after that the application begins to do its magic of converting characters and numbers to digital text format and provides the result in real time. Supported operators include:

Basic math operations: +, -, x, ÷, +/-, 1 / x Other operations:%, √, x !, | x | Exponentiation / exponentiation: ℯx, xy, x2 Brackets: () Trigonometry: cos, sin, tan Inverse trigonometry: acos, asin, atan Logarithms: ln, log Constants: π, ℯ, phi

No less interesting is the PhotoMath application, it allows you to solve equations by simply pointing the camera at the formula. The developers are constantly improving something and increasing the functionality of the application, but do not expect special miracles. Especially if you are in your second year or something worse.

PhotoMath

To do this, just use a similar command:

Md5sum disk.iso

Or you can use the dd utility:

Dd if = / dev / cdrom | md5sum

In the case of DVD burning, an additional step must be taken. This is due to the fact that when writing to DVD, service information is also written, therefore, to check DVD disks with the dd utility, you need to specify the size and number of blocks exactly. In order to find out how many significant blocks (extents) are in the ISO image, run:

Echo $ (($ (ls -l disk.iso | awk "(print $ 5)") / 2048))

The result will be the number of blocks, we will substitute this number into the dd command. Let's say we got 159381, then the command will look like this:

Dd if = / dev / cdrom bs = 2048 count = 159381 | md5sum

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ NetworkProvider \ HwOrder \

We need to edit the ProviderOrder parameter:

WDNP32, SnacNp, RDPNP, LanmanWorkstation, webclient

Computer Policy \ Computer Configuration \ Administrative Templates \ System \ logon

We are interested in setting

Always wait for the network at computer startup and logon

Set it to Enabled and reboot.

Personally, I really like WkHtml for these purposes, which is set by the familiar commands for a long time:

Cd / opt wget http://downloads.sourceforge.net/project/wkhtmltopdf/0.12.1-dev/wkhtmltox-0.12.1-c22928d_linux-wheezy-amd64.tar.xz tar -xpJf wkhtmltox-0.12.1-c22928d_linux- wheezy-amd64.tar.xz rm wkhtmltox-0.12.1-c22928d_linux-wheezy-amd64.tar.xz

Run with the command

/opt/wkhtmltox-0.12.1-c22928d/bin/wkhtmltoimage --width 1000 --height 1000 --crop-w 1000 --crop-h 1000 --format png --quality 80 http://xakep.ru/ /tmp/snap/xakep.ru/WkHtml.png

Toolza is very convenient to use in different scripts - there are many different settings. If for some reason you do not like this tool, here is a list of analogs:

webscreenie;
PhantomJs;
Python-webkit2png.

Try to install BlueMan, it is in the repository:

Apt-get install blueman

If BlueMan flatly refuses to see the adapter, run in the console:

Apt-get install bluetooth echo "0000" >> / etc / bluetooth / pin /etc/init.d/bluetooth start hcitool scan

First, we install the module for working with Bluetooth, then we set the password for the connected devices, then we start the daemon, and it remains to scan for the presence of Bluetooth devices. After installing the module, you can drive the bluetooth from the console or through the shell, whichever you prefer.

Try to use Foreign Linux for this purpose - it is a dynamic binary translator and emulator that allows you to run unmodified Linux binaries under windows without using drivers or modifications, thus implementing a completely different approach than in Cygwin and other tools. The following tools are currently available in FLinux:

basic utilities: Bash, Vim, nano;
development environments: Python, GCC;
package manager: pacman;
terminal games: vitetris, nethack;
utilities for working with the network: wget, cURL, SSH;
X environment applications: xeyes, xclock, glxgears.

I personally use two tools for this purpose. The first one is remmina, comes from the repository, has many different plugins that can be delivered:

RDP, VNC, NX, XDMCP, SSH, Telepathy

It has a simple, unloaded interface, very easy to operate. And the second is the eternally young rdesktop, about which only those living in the bunker have not heard. The syntax is something like this:

Rdesktop -u user -r disk: home = / home / user -g 1280x975 -k en-us -d domain 192.168.0.1

Here, in addition to connecting to a remote desktop, we also hook up the home folder, which sometimes comes in handy in our work. Someone will say that this is inconvenient, but believe me - this is a matter of habit, aliases and bindable scripts on hotkeys.

Remmina

I can offer the following packages as analogues:

knoda;
GNOME-DB;
Berkley DB.

Also, if you need to open a database from a network resource and enter data into it or display reports on the screen plus use VBA, take a look at these solutions:

MDB Tools;
Linux MDB driver;
Kexi.

The most must have, in my opinion, is “The Web Application Hacker’s Handbook: Discovering and Exploiting Security Flaws”. In addition to the necessary basics, a methodology for testing a web application is described, which will pump you a certain number of skills on the topic. But in general - keep the links with the top hackbooks: one and two. They are partly repeated, but there are also differences. There is a lot of interesting things that should definitely not only occupy your shelf, but also replenish your stock of knowledge.

Easy! To warm up and get started, you can look at the bWAPP project, which contains a huge number of various bugs. Take a look yourself:

SQL, HTML, iFrame, SSI, OS Command, XML, XPath, LDAP and SMTP injections
Blind SQL and Blind OS Command injection
Bash Shellshock (CGI) and Heartbleed vulnerability (OpenSSL)
Cross-Site Scripting (XSS) and Cross-Site Tracing (XST)
Cross-Site Request Forgery (CSRF)
AJAX and Web Services vulnerabilities (JSON / XML / SOAP / WSDL)
Malicious, unrestricted file uploads and backdoor files
Authentication, authorization and session management issues
Arbitrary file access and directory traversals
Local and remote file inclusions (LFI / RFI)
Configuration issues: Man-in-the-Middle, cross-domain policy files, information disclosures, ...
HTTP parameter pollution and HTTP response splitting
Denial-of-Service (DoS) attacks: Slow HTTP and XML Entity Expansion
Insecure distcc, FTP, NTP, Samba, SNMP, VNC, WebDAV configurations
HTML5 ClickJacking, Cross-Origin Resource Sharing (CORS) and web storage issues
Unvalidated redirects and forwards, and cookie poisoning
Cookie poisoning and insecure cryptographic storage
Server Side Request Forgery (SSRF)
XML External Entity attacks (XXE)
And much much much more ...

The official website of the project describes what can be found there. I also strongly advise you to look at, there is a whole collection of boot2root images for everyone.

To do this, you can use a similar syntax:

Tar -zxvf file.tar.gz --wildcards "file / bin" -C ./

Thus, we will unzip from the file.tar.gz archive only the file / bin folder into the current directory.

Is it possible to host a virtual machine on a server without a GUI?

Yes, for example, you can use QEMU. QEMU refers to programs that emulate the hardware environment. Its main functions are similar to those of VMware, VirtualBox, Bochs or Virtual PC. Some features are different though. For example, two types of emulation are supported:

Full system emulation - a full-fledged virtual machine is created, which has its own processor and various peripherals;
User mode emulation - this mode, supported only in Linux, allows you to run programs compiled for another platform on a native processor.

In the second version, QEMU takes care of all the translation of processor instructions and conversion of system calls. In this mode, it is possible to emulate not only x86, but also processors of other architectures: ARM, SPARC, PowerPC, MIPS and m68k, which is pretty cool. QEMU is available in the Debian repository.

Sudo apt-get install qemu kqemu-common kqemu-source

Now we collect the kqemu QEMU Accelerator Module. It allows you to execute part of the code directly on the real processor, bypassing the virtual one, thereby speeding up the work of the guest system. Thanks to him, the launch of the virtual OS increases significantly.

Sudo module-assistant prepare sudo module-assistant auto-install kqemu

Trying to load the module:

Sudo modprobe kqemu lsmod | grep kqemu kqemu 124196 0

To avoid loading it manually in the future, add the kqemu line to / etc / modules. To start the virtual machine itself, the command is enough

Qemu -hda test-disk -cdrom ubuntu-server.iso -m 512 -boot d -localtime

The possibilities of QEMU are almost endless, and the documentation contains a huge number of pages of information, it is simply impossible to describe the entire process and all the subtleties. Therefore, if you are interested in this tool, I advise you to definitely try and use it in your projects, since it is not as complicated as it seems at first glance.

How to transfer windows to SSD with Linux installed there, while preserving partitions and data? At the same time, other Windows partitions should be saved on the HDD and the swap from / home should be installed.

Initially, we have one 1 TB hard drive, divided into three partitions (C: D: E :). You need to deliver the SSD and split it into three partitions. After the transfers, you should get the following:
HDD, instead of drive C: there will be two partitions: / dev / sda1 -> / swap; / dev / sda2 -> / home; Sections D: E: we don't touch.
SSD, / dev / sdb1 -> Win7 bootloader, which will later be rewritten by grub; / dev / sdb2 -> C :; / dev / sdb3 -> / (Linux)
First you need to make a backup of all important and critical data. If you want, you can even take a disk image, so for sure, you can use Clonezilla, which was written about in the previous issue] [.
Now you can start moving partitions. For these purposes, Acronis Disk Director is quite suitable for us. After starting and defining two drives HDD and SDD, select the Windows bootloader (this is a 100 MB partition on sda) and select to transfer the volume to the SSD. We do the same with the C: drive. After rebooting, our Windows should swear and not boot, which is logical. Do not be alarmed, insert the boot disk, let it restore the correct paths to the bootloader. The most important thing is not to go further until the system starts up normally.
After there will be no problems with loading Windows, we move on. We are starting to install Linux. We need to put / swap at the beginning of the sda hard drive, then we give everything that remains of the former C: drive under / home, put everything else on the SSD and install grub on it.
After rebooting, you should get the desired map that you planned. Two operating systems split across two disks. This gives a good increase in the operation of both operating systems, but also adds some inconveniences associated with the fact that data cannot be lost and such experiments have to be performed on a combat vehicle. If possible, I advise you to practice "on cats" or at least on virtual machines before starting.

SSD or HDD in a laptop for daily work?

A. An SSD will give a significant speed boost compared to a conventional HDD, plus if you use so-called server SSDs, designed for more rewriting cycles, you can achieve very good MTBF performance. Plus quiet operation and less weight of the laptop.

How to remove grub and restore windows 7 bootloader

When installing programs that can be launched from the Windows context menu, an error occurs - 2147467262 The interface is not supported. You can find out how to fix it in this article. This problem can appear on all versions of Windows. But more often it occurs on Windows 7. Different methods of elimination will be used. If one doesn't work, use the other.

Causes of the error in Windows

Error 2147467262 can be caused by system file failures during software installation. In this case, violations could already be in the system before the installation of the programs. A message appears when the user tries to use the context menu (by clicking the right mouse button (RMB)). These OS symptoms can indicate the presence of viruses in the computer, which often violate system files.

Error 2147467262 in Windows - What to do

To get started, try simple steps that can fix most temporary system crashes. First of all, restart your computer and try to cause the "Interface not supported" error. The next step can help you determine which program is causing the error. We need to try to boot into clean Windows. To do this, follow these guidelines:

Restart your computer and try to generate the error again. If it appears, then system services have nothing to do with it. But if the system message no longer appears, you can determine which service is calling it. To do this, you need to take turns putting one check mark on the service and restarting your PC. To speed up the process of finding a causal service, you can choose not one, but several services at once. The main thing is to memorize the group in order to later determine the non-working one from this group.

In the "Startup" tab, select each application that starts with Windows and click the "Shutdown" button at the bottom. When you log in using a clean boot method, they also need to be enabled one at a time to determine the cause of error 2147467262. Once you identify the service, you can temporarily disable it. Then, find out how you can troubleshoot problems with this service. Also try reinstalling or uninstalling a program that you installed on your production operating system.

Restore system files

If the previous method did not help to resolve the error, we will try to restore all possible failures in the system files. For this, Windows has its own utilities. You will need a stable internet connection as the utilities will need access to Microsoft's server to download corrupted files. Execute the following instruction:

If this method also does not help, like the previous one, try to restore the system using the Windows boot disk. DVD from which you installed the system. To boot from disk, you will need to set the disk drive boot options in BIOS again. The following steps are similar to installation. Only when choosing actions, you need to specify "System Restore" instead of installation. Then follow the prompts of the wizard.

Windows Fix Utility

Previously, a utility from the creators of Windows was available on the official Microsoft website. It allowed you to fix many problems on your computer and was called Windows Fix It. The utility developers have implemented its functions differently. It has not been available at the download address for a long time. In recent versions of Windows, developers have appropriated the capabilities of a once-existing utility in the OS's built-in Troubleshooter. In early versions, this item was never considered to be effective by users. But today, running "Troubleshoot" in Windows 8.1, 10, the wizard really becomes useful.

Another unofficial version of this utility was developed by a group of programmers. You can download it at https://windowsfix.ru/. Since the developer is unknown, check the utility for viruses before launching and installing. There is another utility for Windows 10 that also resolves many errors and crashes. You can download it at http://www.softportal.com/get-42386-fixwin.html. It does not need to be installed, it is a portable program. It only needs to run the executable file. For the sake of computer security, the utility also needs to be checked for viruses.

If we are talking about unofficial solution methods, try downloading and running the utility from this forum - http://delphidevelop.ru/forum/29-312-1/. The link is in the first post. Everyone who has tried it claims that the error has been fixed.

Other ways to resolve the error

If you receive error 2147467262 and you cannot open folders on your computer, try creating a new account. It will not help solve the error on the administrator account, but you will have access to files that can be transferred to another disk, flash drive or cloud.

If the user does not have access to the standard Start or Control Panel, press WIN + R together and enter netplwiz. Press ENTER;
Click the "Add" button and create a new user, assigning the required parameters;
Restart your computer and choose a new account.

Once you are logged in, try opening the folders containing important data and transferring it. After saving copies of the files, you can try to repair or reinstall the system.

There is another way that can solve the error 2147467262 - the interface is not supported. It consists in re-registering the dynamic library (dll) files. To use it, you need to enter a large number of commands sequentially. In terms of complexity, it is comparable to reinstalling Windows.

Often, users when entering the personal account of clients, such as 1C, EGAIS, etc. encounter the "interface not supported" error. This error can also occur in many other situations, for example, when opening an Excel document or even when logging into an electronic wallet such as WebMobey. Today we will try to tell you as briefly and succinctly as possible how to solve this problem.

To send reporting declarations, the client needs to log into his personal account, but sometimes an error of the following content occurs when entering:

Object: undefined
Bug #: 2146828275
Description: Type mismatch

The error is of a general nature, it is difficult to determine the exact causes of the problem by the code alone. It all depends on which application or portal you have this error in. First of all, we advise you to contact the appropriate technical support, where specialists can help in a specific situation. Now we will consider only the general algorithm using the example of the EGAIS and FSRAR portal.

Solutions

Make sure that you have all the necessary components to enter your egais.ru personal account using a hardware key (such as FSRAR Crypto 2 and FSRAR Crypto 3). Logging into EGAIS should be done only in the Internet Explorer browser using license and current keys, for example, Jacata or Rutoken ECP 2.0. If you cannot enter the personal account of the egais.ru or FSRAR portal using a hardware key (not an electronic copy), then try the following:

On the computer, go to "Control Panel" - "Add or Remove Programs" and remove the ClientSetup client and FSRAR Crypto 2;
Go to the official website egais.ru. After that, at the top of the screen, click on the item "Enter your personal account". Then go to the section "Read the conditions and check their fulfillment" and click "Start checking". During the check you will be offered to download FSRAR Crypto 3. Download it to your computer and install;
After the installation is complete, restart your Internet Explorer browser. Next, click on the gear symbol, go to the "Browser Options" - "Security" section. Scroll to the bottom of the list and activate the "Enable protective mode" item. After that, in the "Security" tab, again scroll the page to the very bottom and click on "Enable Pop-up Blocking". After that, try again to log into your personal account egais.ru or FSRAR. Often at this stage, the error stops appearing.

If you have special software for recognizing certificates, for example, CryptoPRO 4.0, then for the client to work correctly, you must have an official and valid license purchased from a certification center. This software is not compatible with hardware keys. CryptoPRO 4.0 is used if you bought certificates for submitting reports in accordance with GOST 2012. This software can be recorded on Rutoken, eToken, or, as is often the case, on ordinary USB drives.

If you cannot enter your FSRAR personal account in accordance with GOST 2012 if you have licensed software, then you must do the following:

Launch the Google Chrome browser (if the browser is not installed on your computer, then install from the official website.
Use the link https://chrome.google.com/webstore/cate to enter the Google Extension Store. In the search enter cades browser plug and install it;
After that go to browser extensions and enable CryptoPro Extension for CAdES Browser plug;
Try to log into your FSRAR personal account again.

Outcome

We hope this article helped you solve the error 2147467262 "interface not supported". If the problem remains relevant, then contact a specialist for help, or leave a contact phone number in the support service.

Windows 7 explorer interface is not supported. How to fix EXE error

First solution to "interface not supported" problem in Windows 7

The second way to solve the "interface is not supported" problem in Windows 7 found on the Internet

First solution to "interface not supported" problem in windows 7

The second way to solve the "interface is not supported" problem in windows 7 found on the Internet

Other publications:

"The interface is not supported", how to get rid of?

Correction of the error "Interface is not supported"

Error: "The interface is not supported" in windows 7 (explorer.exe) "MS windows" Blog of useful articles about the development and promotion of sites

Other publications:

FAQ # 196. We answer your questions! - "Hacker"

Is it possible to host a virtual machine on a server without a GUI?

How to transfer windows to SSD with Linux installed there, while preserving partitions and data? At the same time, other Windows partitions should be saved on the HDD and the swap from / home should be installed.

SSD or HDD in a laptop for daily work?

Causes of the error in Windows

Error 2147467262 in Windows - What to do

Restore system files

Windows Fix Utility

Other ways to resolve the error

Solutions

Outcome

Popular articles

Latest articles

Sections

Pages

Special projects

Contacts