Enter BIOS on a Lenovo laptop. We go into bios (BIOS) on a Lenovo b590 laptop

Lenovo is on the list of the largest companies in the world that produce computers. And since the demand for the products of this company is growing, questions about the proper operation and operation of Lenovo equipment are becoming more and more pressing for users. And for those who decide to reinstall Windows, at the very beginning of the process the question arises: how to enter the BIOS in Lenovo?

First, it’s worth understanding what a BIOS is and what it comes with. So, BIOS on Lenovo is a special microscopic program that ensures correct and stable interaction between all components of the PC and the OS and allows you to customize it. And the BIOS setting is a standard PC setting that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is available on any computer, be it Lenovo B560, Lenovo S21 or M5400.

Today, several different versions of Bios have been created, which differ slightly in appearance, but as far as functions are concerned, everything is identical. Each version is used to initially set up the computer and test it. BIOS functionality includes:

• Setting date and time;
• Selecting the boot sector – the device from which the operating system will be installed or loaded;
• Checking system components, including checking the health of RAM and hard drives;
• Connecting password protection on your laptop to protect personal data.

How to enter BIOS

On different Lenovo models, the methods for entering Bios on a laptop may differ. First, try the standard login method - when you start your personal computer, you need to press the F2 button on the keyboard, sometimes holding down the Fn key first. Next, the PC settings menu will be called up.

But this method does not always work. For some Lenovo models, the BIOS does not load when you press F2 or Fn+F2 - for example, Lenovo Legion Y520, Lenovo G70, G50-30 or G500. If you tried to enter bios using the method described above and it did not work, the following instructions are for you:

1. There should be a special small key with a curved arrow on the side of the laptop (where the charging socket is usually located) or right next to the power button. It's called Novo Button, One Key Recovery or One Key Rescue System. You need to turn off the laptop and click on it.
2. If you pressed the correct button, the laptop will start, and on the screen you will see that we go to a special start menu:

Bios Setup (parameters);

System Recovery (system recovery);

Boot Menu (boot menu).

1. As you most likely guessed, to enter the BIOS on Lenovo, you need to go to the BiosSetup item. After you select it, you will see that the laptop has entered the BIOS and you can configure it as you wish.

Two secrets for launching Bios

But if you still haven’t been able to start the BIOS using one of the methods described above, and the Windows 8.1 or higher operating system is installed on your laptop, we’ll tell you two startup secrets.

• You need to turn on the PC. With the computer running on the desktop, drag the mouse pointer to the lower right corner of the desktop (call up the side menu).
• A menu opens for us where we select “Options” - “Update and Recovery” - “Recovery”.
• Here, in the “Special boot options” section, click on the “Restart now” button.
• Next, a blue screen with tiles will open. Open the “Diagnostics” tile, clicking on which will take you to additional options.
• You need to open the “UEFI Firmware Settings” item and click the “Reboot” button. Ready! You are in BIOS!

Second secret. Many Win 8.1 users make a mistake when trying to enter Bios. Everyone knows how to get into the BIOS - you need to press a certain button on the keyboard. To do this, the user clicks on “Shutdown”, waits until the laptop turns off, and then presses the button to enter the Bios, but the computer starts as before - the OS is loading.

The whole problem is that the Windows 8.1 operating system initially works with a quick startup function, which is based on sleep mode - enter the BIOS without turning off the PC, but rebooting it.

Some useful tips:

• After entering Bios, go to various settings for system parameters and boot in the BIOS itself. Be very careful and careful, and it’s better not to touch something you don’t know, as there is a risk of doing something wrong and completely losing your computer. And after making all the changes, go to the “Exit” section and select “Save & exit”. After this, the laptop will reboot, and when it starts again, all the settings that you previously had to set will be taken into account.
• If the above methods for entering the BIOS on a Lenovo laptop do not work, try pressing and holding the F12 key when starting the device until the BIOS starts - this method works on some Lenovo models.
• Very rarely, but it still happens - in some models the F1 key works (you need to press it several times until the laptop turns on).
• Manufacturers recommend configuring PC settings in Bios only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, this will most likely cause some system problems in the future.
• Before exiting the BIOS, be sure to save all changes so as not to go astray.

Remember that setting up Bios is a very serious action that requires maximum understanding of the process and great attention to detail. You should be aware that if configured incorrectly, some system components may not work correctly, which brings additional operational difficulties. And if you doubt that you know how to do it correctly, it is better to call qualified specialists, this will save money, time, and nerves. We hope that this article helped you understand how to enter Bios.

In laptops, the touchpad replaces a regular computer mouse. For every user, the convenience of a touchpad is a relative concept. Some people find it easier to use a mouse, but they also have to carry a mouse with their laptop. Moving the cursor using the touchpad is convenient in its own way, but sometimes there are situations when the touchpad stops working. There are several ways to fix this problem.

How to enable the touchpad by rebooting

Often, in case of interruptions in the operation of various computer functions, simply rebooting the device helps. This is the easiest and fastest way to check the functionality of your TouchPad. After restarting, the touchpad functions in its standard mode.

To restart your laptop, temporarily connect your computer mouse. If this is not possible, you will have to use the keyboard.

A restart can be done in several ways:

• Press the key combination Alt + F4, then use the arrow keys to select the reboot function
• Activate the Windows (Win) button - use the arrows to go to “Start” - select “Shut down” - press “Enter”
• Press Ctrl + Alt + Delete – “Shut down”.

If the problem is not resolved, you should move on to other methods to fix the error.

Enable TouchPad via hotkeys

All laptops are equipped with fast functions for turning on Wi-Fi, changing brightness, volume, including turning on the TouchPad. They are located on the keys F1 to F12. Work in combination with the Fn button. On the keyboard, the touchpad enable function is shown in the video as an icon with a crossed out touchpad and a hand next to it.

Each laptop manufacturer sets different default numbers. In the table below, we show several examples of using hotkey combinations on different brands of laptops.

Setting up TouchPad via BIOS

All laptop components are regulated through the BIOS system. The TouchPad is no different, so you can turn it on this way.

To do this, follow these steps:

• Reboot your laptop
• During startup, press the "Delete" or "F2" key
• Find the "Advanced" tab
• Go to the "Internal Pointing Device" section
• Set to Enabled
• Save the changed settings using “F10” and “Y”.

Important: the names of sections and parameters in the BIOS differ depending on its version, so it is better to read the operating instructions for your laptop model on the manufacturer’s official website.

Enabling the Synaptics Touchpad

Some laptops have touchpads from Synaptics. It has additional settings to enable and disable the TouchPad. To check the operation of the sensor, go to the “Control Panel”:

• Section "Equipment and Sound"
• Subsection "Mouse"
• Device Settings or ELAN Tab
• Enable button
• Save the configuration by clicking "OK".

There may be a ClickPad function in the mouse properties. It activates the touchpad, which automatically turns off when a mouse is connected. If you notice this relationship, turn on this feature in your mouse settings. If the power button is not active, the error should be corrected in another way.

Reinstalling drivers

From time to time, drivers require updating or reinstallation. There can be many reasons for a driver crash. If none of the methods helps solve the problem with turning on the touchpad, contact driver help. All drivers are available on the official websites of the manufacturer.

Tip: when downloading drivers, be sure to pay attention to the laptop model, Windows version and bit depth (x86 (x32) or x64).

The best outcome is when all parameters match. But there are unimportant parameters, for example, the version of Windows, which will not significantly affect. In any case, there should be a match of bit depth.

Automatic installation may not work. In this case, try installing the drivers manually:

• Control Panel
• device Manager
• In the "Mouse" section, find the touchpad
• Open "Properties" via RMB
• The device status should indicate: “The device is working normally.”
• Go to the Driver tab

• First, click “Roll Back”, then “Update” if that doesn’t help.
• In the window that opens, select manual search and installation of drivers
• Specify the path to the drivers and click Next.

Important: do not forget to restart your computer immediately after installing the drivers, and then check the operation of the TouchPad.

After rebooting, the touchpad should work. If this does not happen, most likely the cause is mechanical damage. This could be damage to the cable or the panel itself. There may be many options, so contact the service center for help.

Conclusion

Touchpad malfunction is a common problem among laptop users. Fortunately, there are several ways that can solve this issue. Try to perform all the methods in turn, starting from the simplest. In most cases, it doesn't come down to installing drivers.

BIOS is a very important component of a computer and is a part of the system software. With its help, when you turn on the computer, the functionality of all components is tested and verified. It allows the user to make changes to the operation of individual computer components, set boot priority, date and time, etc. In this article we will look at how to do it on Lenovo laptops.

The input is slightly different in different Lenovo laptop models. If this is your first time, you can see how to do this in the instructions for your laptop. There is also a way to find out which login keys your model uses. Within 2-3 seconds after turning on the laptop, they are displayed on the screen as a hint.

In general, most Lenovo models use the F2 key or the Fn+F2 combination to enter the BIOS. But not all models respond to their pressing.

In order to enter the BIOS on the Lenovo g50 model, you need to press a special button next to which there is an arrow. This button is located near the power (charging) input. With the laptop turned off, you need to press and hold it until “Novo Button Menu” appears.

Then use the up/down arrows to select “BIOS Setup”. This way you can go into the settings in the BIOS. If you change something in the settings, press Fn+F10 to save the changes and exit. You will then be asked to save your changes and then press Enter to confirm them.

How to enter settings on a Lenovo b50-30 laptop

On this model, you won't get into the BIOS settings using the Delete, F2, F8 or F10 buttons, and there's no button near the power input. The button to call up the “Novo” menu is located on the right side near the USB port. To press this button you will need a pin or sharp object. Afterwards you will be taken to the “Novo Button Menu”.

Setting up the BIOS on Lenovo b50-70 to install booting from a flash drive

To configure booting from a flash drive on the Lenovo b50-70, install it in a USB port and go to settings using the Fn+F2 key combination. Go to the Boot tab in the Boot Mode section and change UEFI to Legacy Support. In Boot Priority we also change to Legacy First. Then exit and confirm saving the changes.

After rebooting the laptop, you again need to go into the BIOS settings using Fn+F2. Go to the Boot tab. Here, in the Legacy section, a hard drive, drive and flash drive appeared. To boot from a flash drive, move it to the first place using the Fn+F6 keys.

After installing the operating system from a flash drive, you can return the default settings (to factory settings) in the Exit section. Here we select the Load Default Setting item.

Features of entering the BIOS on laptops with Windows 8

Let's look at how to enter the BIOS on a Lenovo v580c laptop with Windows 8 installed. After pressing and holding the special button (with an arrow) next to the power input, the Windows 8 system recovery window appears.
Select the language, keyboard layout, then the “Diagnostics” mode (computer recovery). Then go to “Advanced Settings”, then to “UEFI Firmware Settings” and click on the “Reboot” button. Afterwards we get to the BIOS menu.

Another case is when, after installing Windows 8 on a v570 laptop, the BIOS entry keys F2 and F12 are automatically blocked. Also, this model does not have a special “Novo” button.

To unlock them, you need to remove the battery, unscrew the bottom cover and remove the battery for a few minutes. This resets the BIOS settings. After this, the keys will be unlocked.

There are probably no PC users who do not need to go into the BIOS at least once during the entire time they work with the computer. Those who use Lenovo products did not stand aside either. This manufacturer has a huge list of laptops, and not all of them can enter the BIOS in the same way, but setting it up is easy - the functions are the same everywhere. Today we will try to figure out how to enter the BIOS on a Lenovo laptop, be it Lenovo s9, Lenovo z50 or Lenovo b50.

Why might there be a need to enter the BIOS on Lenovo? Even though laptop manufacturers in each new released model try to minimize the user’s PC knowledge requirements and give the simplest possible answer to the question of how to configure it or determine the cause of problems, sometimes there is a need for finer adjustment of parameters. What can you use this input for:

• Turning on and off some laptop hardware, diagnosing problems;
• Configuring boot parameters for the OS and the entire device;
• Configuring the disk subsystem, in particular, its operating modes;
• Customization of many other functions, parts or the system in general.

Equipment manufacturer Lenovo has created its own software called Lenovo One Key Recovery - this is a system that includes the ability to backup data on a Lenovo PC and restore it. In order to turn it on, there is an additional button on the laptop - Novo. It is found on almost all the latest laptop models from Lenovo and is located either on the side panel of the case or near the power button. Sometimes, in the most modern models, there is a small hole with a microswitch inside. In this case, you need to use a thin, non-sharp object - for example, a paper clip.

And despite the fact that the direct purpose of this button is not to call up the BIOS, you can still get into the BIOS using it:

• Turn off the device by holding down the power key for 10-15 seconds;
• Hold the Novo key for 2-3 seconds and release;
• Your laptop turns on and opens a small menu with a choice - click on the line labeled “BIOS Setup”.

Entering BIOS on a Lenovo laptop: method 2

Entering the BIOS on a Lenovo laptop is carried out in several ways - unfortunately, there is no one solution for everyone on how to get into the BIOS, but the methods for launching it are quite simple. So, let's move on to the first method.

The most popular solution is to use the keyboard - simultaneously pressing several laptop buttons immediately after starting it. Turn off your laptop (this method will not work if it is turned on), then press the power button and immediately one of the options:

• F2 button or Del button;
• Combination Fn+F2;
• F1 key

If the BIOS was launched incorrectly, the computer will boot the OS in normal mode. In this case, you will have to turn it off again and call the BIOS again, but using a new boot method. To avoid playing guessing games and launch the BIOS faster, you can also look at the instructions for your Lenovo laptop.

It also happens that the laptop starts up too quickly, and the user does not have time to press the required combination. To avoid this, turn off the laptop by holding down the power key for 10-15 seconds. Then hold down the desired combination to enter the BIOS, and then press the power button and release, while continuing to hold down the keys to enter the BIOS until the desired screen with parameters appears in front of you.

How to enter the BIOS of a Lenovo laptop: method 3

Around the same time that the new BIOS version called UEFI was released, the new Windows 8.1 operating system was released. And along with it, a new way to load the BIOS appeared - through the OS:

• First you need to go to the desktop. Then call the side menu of the Windows desktop - to do this, move the mouse cursor to the lower right corner of the desktop. Select “Settings” – “Change computer settings”;
• Next, go to the “Update and Recovery” menu item, and then under the “Special boot options” line, click on the reboot key;
• After the reboot has been completed, we are taken to a screen with the ability to select an action. Click on the Diagnostics tile and then on UEFI Firmware Settings;
• Confirm your choice by clicking on the “Reboot” button. Done, the laptop has entered the BIOS!

How to go to BIOS on a Lenovo laptop: method 4

If you have Windows 10, then there is another way to load the BIOS, similar to the previous one. Here it is done a little differently:

• In the “Start” menu, click on “Settings”, select “Update and Security”;
• Open the “Recovery” tab and under the inscription “Special boot options” click on reboot;
• The device reboots, and we see a window for selecting an action. After you enter the desired menu, do everything as in the previous paragraph when starting the BIOS on Windows1.

If, when using this or the previous method, you do not see the “UEFI Firmware Settings” button on the screen, this means either that this laptop has an outdated version of the BIOS without UEFI, or that the OS was installed on the laptop in Legacy mode. Then working with UEFI is not available from the operating system - you will have to use the first two methods.

How to enter BIOS: method 5

The last method is the most radical, and can only be recommended to those users who already have good experience in disassembling such a device. Otherwise, you run a high risk of permanently damaging your Lenovo laptop.

The essence of the method is as follows: to reset all BIOS settings, you need to temporarily disconnect the special CMOS battery that is connected to the device’s motherboard. After performing this action, the device will “think” that the settings may be incorrect and will offer you to open the BIOS to correct them, or it will even enter it on its own.

BIOS batteries look different and are in their own place in almost every model, so you’ll have to dig around before you get to it and turn it off. But in general the procedure is as follows:

• Turn off the laptop, remove the battery;
• Access the CMOS battery and carefully disconnect it from the motherboard;
• Wait 15-20 minutes (this is necessary so that the CMOS chip is de-energized and the capacitors on the motherboard are discharged);
• Reconnect the battery, reassemble the laptop, connect the power and turn on the device;
• If you did everything correctly, you will see the BIOS settings screen.

We hope that one of the methods described above helped you find the answer to the question of how to enter the BIOS on a Lenovo P70, G50-80, Lenovo ThinkPad T400 or T440 laptop.

This article describes a universal algorithm for how to enter the “BIOS” in Lenovo. Most often, this operation is performed during reinstallation of the operating system or in case of problems. If everything is clear with stationary PCs, then with laptops you have to tinker, since there are several options available and you need to figure out which one is suitable for this particular device.

Documentation

You can get the answer to the question “how to enter Lenovo BIOS” in the documentation that comes with the device. For desktop PCs, this is the motherboard user manual. There is an entire section dedicated to this issue. In addition to the procedure for entering the basic settings, each parameter is also described in detail, as well as its possible values. In most cases, the Del key is used for these purposes. In the case of a laptop, the situation becomes more complicated. There may be various options here. And one way to find out which one is used in your case is to study the instruction manual. It necessarily describes the procedure for entering the basic settings of a device such as a Lenovo laptop. You can enter the BIOS using one of three options: F1 or F12.

Internet

Paper documentation is not always saved. This is especially true for those devices that have been in use for more than three years. But there's nothing wrong with that. In such a situation, the manufacturer’s official website should come to the rescue. There are sure to be electronic versions of all instruction manuals. But here it is necessary to note one important point. In the case of a desktop PC, you need to go to the website of the motherboard manufacturer. But in the case of a mobile PC, we turn to the Lenovo website for documentation. The instruction manual should be on this resource.

Screen

Another way to find out which key is used to access basic settings is to carefully watch the laptop boot process. To be more precise, the first window with equipment parameters. If you see the logo of the device manufacturer, then you need to press Esc. You need to pay attention to the line “Press b to setup”. Instead of b, F1 or F12 must be specified. This is the answer to how to enter the “BIOS” in Lenovo. This method is universal and can be used not only on products from this Chinese manufacturer, but also from any other company.

Entering the BIOS

Well, now let’s directly figure out how to enter the “BIOS” in Lenovo. It is important to understand that this can only be done during testing of the equipment while turning on the PC or rebooting it. In turn, it is impossible to access the basic settings of a personal computer in the operating system. When the first window appears (this can be either a window with PC settings or the manufacturer’s logo), press the key that was identified in the previous step. After the line “Press b to setup” (instead of b there should be the key that is used to access the BIOS) changes to “Entering to Setup”, release it. After collecting information, a window with “BIOS” will automatically open. Now you can make the necessary changes to the values. When finished, be sure to save them by pressing F10 and answering “Yes” at the next prompt.

Conclusion

Within the framework of this material, it was described how to enter the “BIOS” in Lenovo. The easiest way to do this is on a stationary. In this case, only one key is used - Del. But in the case of a laptop, everything is much more complicated. There are different options: F1 or F12. Which one is used on your mobile PC can be easily and simply determined by following the instructions outlined in this article. Well, then it won’t be difficult to enter the basic settings system of a given manufacturer’s computer.