Login to uefi bios on hp laptop. Updating HP BIOS from Windows

Twitter

Despite the fact that the input/output system is present on every computer and has an almost identical appearance.

Depending on the manufacturer, login methods and available BIOS setup tabs may differ. In particular, this applies to

Contents:

What is it and when might it be needed?

BIOS– this is a complex system programs, with the help of which a basic information input-output system is created in any computer. The system functions allow you to directly configure the motherboard and devices connected to it, without the participation of the installed operating system. This system is on everyone desktop computer or laptop.

Since it does not depend on all sorts of failures and bugs in the OS, if it does not work, users immediately resort to setting up the basic menu.

With its help, you can perform a system rollback, configure security settings, and change the boot order of devices for installation from a removable drive.

Most often, users enable the menu only when they need to reinstall the OS.

In fact, there is much more features, with which you can significantly improve the performance and security of your computer.

Here you can do the following actions:

Control the boot order of connected to . For example, the user can make it so that it is not the OS that boots first, but the drive or removable USB drive;
Regulate work efficiency central processor;
Determine the factory settings of the computer;
Adjust the bus frequency;
Configure time and time zone;
Choose a language, manage security and other settings.

Below are two ways to enter the BIOS, which are 100% likely to work on any HP computer:

1 Standard menu entry(using the download window);

2 Opening using built-in Windows functions.

Standard method (for any model)

This method is the fastest and most common option for turning on the computer's I/O menu.

To do this you don't need to use a certain version operating system or .

1 To get started turn on the laptop or run system reboot;

2 Immediately after turning on the screen backlight, you must not miss the inscription, when it appears you can launch BIOS. Typically, the line shown in the figure below is delayed for only 2-4 seconds, and then the OS starts loading;

3 While the text remains on the screen, press the key Esc. As a result, it will appear start menu. It presents individual items and keys with which these items can be launched;

4 To log in, press the F10 key;

Notice! To simplify working with the system, the developers have placed the most popular types of settings among users in the initial menu. So, with its help you can view information about the PC, and carry out diagnostics, configure the boot order and start a rollback to it (Fig. 3).

5 After pressing F10 will appear desired menu.

On HP laptops it looks like this:

As you can see, the window lacks a cursor and other familiar functions of a user OS. Management is only possible.

Press the corresponding arrow buttons to move left and right between tabs or up and down to select a specific menu item.

To confirm the action, press Enter, and to cancel - ESC. More detailed description controls are indicated at the bottom of the laptop screen:

The output system on HP laptops has the following tabs:

Main (Fig.4) – displays system time and shows all the factory settings of the PC;
Security – allows you to change, delete or create a laptop administrator password and create a password to turn on the computer;

Good afternoon!

On HP laptops, entering the BIOS is somewhat non-standard (if most devices use the F2 or Delete buttons, then they have ESC). Moreover, this often happens through additional system menu. This is probably why not every user is able to immediately deal with this issue...

In addition, it is also worth noting one more point: the year the device was released. Depending on this, the login process may be “divided” into two or three more options. In general, everything is somewhat confusing...

Perhaps it’s time to finish the introduction and move directly to solving the issue. So...

Several options for entering the BIOS on HP

1) If you are dealing with a relatively new device (~released after 2013)

If your laptop is new, then when you turn it on, it will not show any boot screen ( approx.: on older devices, after turning on, a boot screen with keys to enter the BIOS was shown). Like it or not, but now there is a tendency among manufacturers (including HP): to load Windows as quickly as possible and present the user with the opportunity to move on to working with the OS (and as a rule, because of this, it is not possible to enter the BIOS / UEFI).

Therefore, immediately after pressing the power button, press the key successively ESC(repeatedly!). A system menu should appear (as in the photo below) with several options ( approx. : to enter the BIOS - you need to press F10) :

F1 - view system information;
F2 - diagnostics;
F9 - view the boot menu;
F10- entering BIOS/UEFI settings (what we need!);
Enter - continue downloading (Windows).

Addition!

If you do not have time to press the ESC button before Windows boot- then you can hold down the ESC button before turning on the laptop (and hold it until the system menu appears).

By the way, also on some laptop models you can press the F10 key immediately after turning it on (i.e., enter the BIOS without an intermediary in the form of a system menu).

2) If your laptop is already quite old...

In this case, immediately after turning on, you should see a loading screen (most often, it contains a button to enter the menu BIOS settings). The photo below shows a couple of options (in one case, the key is used to enter F10, in a different ESC).

Note! I also note that on laptops manufactured before approximately 2008, the button can be used to enter the BIOS Delete.

3) If you have Windows 10 installed...

In this case, you can enter the BIOS without pressing any system buttons at all (however, the method is suitable if your system boots and you can open its parameters).

And so, first open the START menu and go to the system parameters (see screenshot below).

Then open the section "Update and Security" , tab "Recovery" . It should have a button "Restart now" (cm. special options downloads).

Next, your laptop will restart; in the menu that appears, select the option "Diagnostics" , after "Firmware Settings" . Actually, now you have entered the BIOS/UEFI settings (see screenshots below).

4) Note!

F1, Delete, F11. Pay attention to these buttons as well. Some devices (mostly older ones) only support these keys to enter the BIOS (pressing ESC - nothing will happen on these laptops).

Specification. Pay attention to the documents (if, of course, they are preserved), which came with the purchase of the laptop. They almost always contain similar information.

Connect your device to the network. The fact is that some laptops do not allow you to enter the BIOS when running on battery(I don’t know if this was done on purpose or a “glitch”...).

To help!

Additions are welcome...

For Windows installations 10 or another operating system on a new (clean without OS) laptop, you need to change the boot priority in the BIOS to external device, for example, on boot disk or flash drive. To do this you need to go into the BIOS. But first, let's figure out what a BIOS is.

Why do you need a BIOS?

It is a system basic settings desktop computer, which are displayed through a special menu. The settings themselves are saved in a special chip located on the motherboard, which can be recognized by the BIOS signature. When you turn on the computer, the BIOS tests and checks the presence of the main components ( installed equipment) and supports them correct work. If any problems arise when turning on the equipment or you need to reinstalling Windows or need diagnostics specific device, the BIOS program is designed for this and much more. Also, using the BIOS, you can set a password to enter the laptop.

To enter the BIOS settings use special keys, in most cases, depending on the model - F2, F11 or Delete.

Using BIOS, the user is given the opportunity to change (enable/disable) parameters installed devices, configure the PC, perform system diagnostics, set the boot sequence.

How to enter the BIOS settings menu on HP laptops

To enter the BIOS settings on HP models, you need to restart (turn on) the laptop, and when the first characters appear on the screen, press the Esc key. The Startup Menu will appear on the screen with the following boot options. To enable the BIOS settings window, press F10 on the keyboard.

Please note that HP laptop models use different BIOS version, and if you are unable to enter the settings in the above way, then instead of Esc, press one of the following keys - F2, F11 or Delete.

In the main menu (Main) provided short description HP laptop parameters - processor series and model, its frequency and capacity. Here you can set the date and time in case of problems with the battery on the motherboard.

To protect your computer, you can set a password in the Security window so that no one can access your laptop. The password entry window appears before the operating system boots.

To change the system configuration, go to the System Configuration window. Here you can select the language. To change the download order you need to go to Boot menu Options. First of all, we turn on the devices from which the system needs to be booted. Then in Boot Order we set using the F5 or F6 keys in which order the devices will be loaded.

After the changes have been made, go to the Exit tab. Select Exit and Save Changes and confirm.

Another way to change the boot order is from installation drives. After turning on your HP laptop, press the Esc key and select F9 (Boot Device Options) from the menu that appears.

Quite often, users have a question: How to open BIOS on a laptop and what is it? Basic system I/O is responsible for normal start PC and the operation of its devices.

What circumstances force you to run the BIOS?

Integrated computer components need to be turned on or off.
Replacing the video card. In many laptop computers two video cards are built-in. Thanks to the input-output system, the user selects either the first or the second.
Setting up special laptop modes. Here the computer owner can configure various modes (hibernation, sleep mode).
Adjusting the time in the system. The system allows you to adjust the time that requires such manipulations, often after resetting the settings.
The need to check the “well-being” of the computer. Through Bios you can monitor many PC parameters.
Return standard settings. By opening the control system, you have the opportunity to restore the system settings to their original state.

This article will describe step-by-step algorithm How to run Bios on a laptop. After reading it, you will understand that opening this system on your computer is not difficult.

Running the system on a desktop computer and a laptop does not have any special differences.

Starting the I/O system

Firstly, to open it, you need to restart your computer. To do this, you will need to click on the “Start” button and find the shutdown/restart button in the panel that appears. The button is located in the lower left corner of the panel.

You can also restart the device by pressing and holding the start/shutdown key, which is (most often) located in the upper right corner of the keyboard. After complete shutdown laptop, you need to press the same key again and start the computer.

You need to open the settings before the computer is fully booted. Most often, when loading, it says at the bottom: Press F1 to enter setup (press F1)

In addition to F1, there can be any other keys, for example:

DELETE

Sometimes you need to press a combination:

Ctrl+Alt+Del
Fn+F1
Ctrl+Alt+Esc
Ctrl+Alt
Ctrl+Alt+Ins
Ctrl+Alt+S
Ctrl+Ins
Ctrl+Alt+Enter

If you did not have time to press the buttons to log in, you should turn off and start the computer again.

Having completed all the steps correctly, you will see a window open in front of you.

Now let's look at how to run the setup on PCs from different companies.

How to run BIOS on an Asus laptop

First you need to turn off your computer. Then turn it on, often press F2 (or keep the key pressed at the same time as the laptop start button). Thus, open the BIOS on portable device Asus won't be difficult.

How to open Bios on an HP laptop

To launch Bios in Hewlett-Parkard, (HP Pavilion, TouchSmart, Vectra, OmniBook, Tablet) you need to either actively press or hold down the F1 key.
To open Bios in Hewlett-Parkard (HP Alternative)- press F2 or Esc in the same way.
To log in Hewlett-Parkard (HP) Tablet PC- press F10 or F12.

How to run BIOS on a Lenovo laptop

Open BIOS on Lenovo laptop Can simple method, that is, by pressing special buttons when turning on. At the beginning of loading, you need to press and hold the Fn key. While holding it, you also need to actively press F2.

Second way: special button"Novo Button" It shows a curved arrow. After turning off the computer, instead of the start button, press the “Novo Button” key.

“Novo Button Menu” will open in front of you, where you will see various ways downloads. In second place will be BIOS Setup.
We point the arrows at it.

Click. Ready.

How to run Bios on an Acer laptop

To open Bios on Acer laptop, you need to actively press or hold F2. If the BIOS does not open in front of you, then you need to try others standard keys turning on the control system, such as: DELETE or combination Ctrl+ Alt + Esc .

How to run BIOS on a Samsung laptop

When you turn it on, press the “pause” or “Fn+pause” button.

You should see “press F2 (f8, f12, f4, etc.) to enter setup.” Based on which button (f2, f12, f4, f8...) appears in the line, we select that one to press.
Increase your computer knowledge every day, since the twenty-first century forces us all to keep up with the times, actively learning about many modern technological processes!

Have a great day!

BIOS - software located on the laptop motherboard. This firmware allows you to integrate the operating system and computer hardware.

Typically, the user is faced with the need to start the BIOS when reinstalling the operating system. This utility allows you to configure the boot order of connected devices when you start the laptop: flash drives, disk drives, hard drives and others. Changing the startup order is necessary to boot the system from external media.

On HP laptops with Windows 7 and below

HP laptops running Windows 7 or XP do not have fast boot support, so entering the BIOS is very easy. To do this, follow these steps:

Turn off your laptop. To quickly turn off, hold down the power button for 10 seconds.
Turn on the laptop, and when the HP or Compaq logo appears, press the "F1" button.
If you need to change the boot order of devices, go to the "Boot" tab.

On most new HP and Compaq laptops, when the corresponding logo appears, you need to press the "F10" and "ESC" button. In some older models, you must use the "Delete" button to open the BIOS.

To determine which key to press a certain model laptop, pay attention to the inscriptions on the start screen - usually a corresponding hint is shown there. If this message does not appear, use one of the above options.

On HP laptops running Windows 8, 8.1, or 10

New HP laptops most often come with an operating system preinstalled. Windows system 8.1 or 10. To quickly turn on the device, Windows fast boot mode is used. Therefore, on such laptops, the initial system initialization is not displayed, and the computer immediately proceeds to launching Windows.

On HP laptops with Windows 8.1 or 10, follow these steps to enter the BIOS:

Go to the Start menu.
Select Change PC settings.
Open the "General" section.
Click "Special boot options" and the button below it.
After the computer restarts, a special menu will open where you need to select the following items: “Diagnostics” - “ Extra options" - "Built-in UEFI settings".
At this point, if you are going to reinstall Windows, connect bootable USB flash drive and click "Restart".
After starting the BIOS, several sections will appear on the screen. The boot order of devices can be changed on the "Boot" tab.
Save the changes using the "F10" button and wait until the computer restarts.

BIOS setup and management:

Use the right/left buttons to move between tabs.
The up/down buttons are used to move vertically in the menu.
The "F1" key brings up help for setting up the BIOS.
The "ESC" key will close the BIOS window and reboot.
The "F5" key will return the BIOS to factory default settings.
The "F10" key will save the last changes made.

Disabling Fast Boot on an HP Laptop

Functions " Fast loading" is provided by the manufacturer and is available in Windows to increase the startup speed of the laptop. However, if it is not needed, disable it. This can be done by changing system registry. For this:

Open "Run" by pressing "Win+R" keys
In the input field, write the word "regedit" to launch the registry editor.
Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Power
Change the parameter of the "HiberBootEnabled" item from one to zero.