Useful utility to scan drivers installed on your computer and download them latest versions. Capable of creating backups software designed for connected devices to avoid problems in the event of system failures.

In order for devices connected to the computer to display and work normally, you need special programs- drivers. They can come bundled with purchased software or be downloaded from the Internet.

However, if you once installed a driver, this does not mean that you can forget about it. After all, new versions come out over time, and if you still have the old one, this can lead to conflicts with the operating system and unstable work. Do you need it? Of course not. Therefore, you should make sure that there is always something fresh on your computer. To do this, you need to download a program to install drivers. One of best options is DriverScanner. This development is free for everyone Windows users 7, 8, XP and Vista.

The operating principle of this program is as follows: it scans everything installed drivers on your computer and displays a list of those that need to be updated. After that, just click on the button and the driver search and installation program will begin to quickly scour the Internet to download the newest versions for you.

Possibilities:

• monitoring application versions for connected devices;
• compiling a list of updates;
• selective upgrade;
• support for all kinds of devices: phones, cameras, printers, monitors, cards and more;
• creating a backup (spare) copy of all drivers.

Advantages:

• auto update mode;
• “batch upgrade” with one click;
• clear interface in Russian;
• recovery in case of failures;
• shareware distribution of DriverScanner - you can download it for free without registration.

Things to work on:

• You can download updates only after purchasing a license key.

The application will be useful for any user. After all, we connect everything to a computer various devices and are interested in them “making friends” with him.

If you bought new scanner and connected it to Windows 10, then after installing the latest drivers there will be no problems using the device. However, if you have an old scanner and Windows 10 does not see it when connected to a PC, you can configure it in the following ways.

Installing drivers for the scanner on Windows 10

If your scanner is more than 3 years old and the installation disk does not match the bit depth and version of the operating system, you should go to the website of the official device manufacturer and download new drivers. We have prepared for you a list of sites where you can download the necessary software:

Download the drivers, connect the scanner to the PC and start installing the drivers. Reboot the PC and check the device for functionality. If this method If the scanner does not work and does not work on Windows 10, then you should try the following methods.

Troubleshooting problems with a connected scanner

If the connected scanner on a computer with Windows 10 is not detected, try the following method to solve the problem:

• Let's go to Explorer. Find the scanner and click right click mouse on the model name. From the list, select “Troubleshooting”.

• The tool will launch. Follow the prompts of the utility. The printer or scanner must be connected at this time.

If the utility did not help solve the problem and Windows 10 does not see the scanner, it is worth checking its installation. To do this, follow the following instructions.

• Click “Start”, “Settings”, “Devices”.

• In the menu on the left, select “Printers and Scanners”. Click on the cross “Add a printer or scanner”.

• A new window will open. Select the item “My printer is quite old...”. Click “Next”.

• We are waiting for the system to find and install the PC to the printer and begin to see it.

What should I do if there are conflicts between the standard Microsoft utility and the manufacturer's scanning program?

If you have figured out the problem of how to connect the device, but scanning a document is impossible due to a conflict standard application“Scanner” from Microsoft and a native program from the manufacturer of the device itself, then follow the following instructions:

• Click “Start”, “Control Panel”, “Programs and Features”, and select “Turn Windows features on or off” from the menu on the left.

• Find the “Document Printing Services” branch. Here you need to uncheck “Scan and Fax Service”, “Windows Fax and Scan”.

• Reboot your PC for the changes to take effect.

Now the scanner can be used without compatibility problems between the two programs.

To learn how to connect a scanner to Windows 10, watch the video:

The scanner is special device, which is designed to convert images to digital format. The process of operation of such a device is called scanning and can be used in many areas of human activity. In this article we will tell you how to install a scanner.

Today the production of such devices is carried out great amount firms from Southeast Asia, the USA and Japan. Most scanner models are usually compatible with operating room Microsoft system Windows.

It should be noted that there are two ways to install the scanner: connect the device directly to a computer or server, thanks to which the scanner will be used by several users at once. Last method most often used in offices where there is no need to equip every workplace With such a device, it is much more profitable to buy one scanner for several employees.

First, let's look at how to install the scanner on Personal Computer or laptop. You will need the most ordinary USB cable, which is usually included with the device. However, if it is not included in the kit, then such a cable can be purchased at absolutely any store computer equipment. One end of the USB cable will need to be connected to a special connector on the scanner, which is located on the back panel of the device, and the other end to the corresponding connector on the computer. The scanner can now be turned on. You may need to wait a few seconds until operating system it will be automatically detected.

If Windows is unable to detect a new device, you will need install drivers. A disk with the necessary software is usually supplied with the scanner. However, if it is not there, you will need to go to the manufacturer’s official website, where drivers for all released models are available for free download in a special section. After downloading, install the driver on your computer or laptop and try connecting the device again.

As already mentioned, it may be necessary to install a scanner using a server. First of all, use a USB cable to connect the device to the computer that acts as a server. Now on this computer, go to the menu "Start" and select "Control Panel", where click on the item "Net". A menu will appear in front of you in which you should select "Network Control Center and shared access» . After this, a list of commands will appear from which you need to choose "View network computers and devices". Next, a special window will appear on the screen, where you need to select from the list of scanners the desired model devices.

In the next dialog box that appears, click on the button "Install", after which the Installation Wizard will automatically launch. Follow the instructions exactly, and at the end of the installation, click on the button "Ready". The scanner is now connected and can be used by transferring data via local network.

As you can see, installing a scanner and connecting it to a computer or server does not require any additional knowledge or skills. It's enough just adhere to a certain procedure, including ensuring the availability of necessary software For proper operation new device.

Finally, you should just pay attention to the fact that some scanners can be connected not to a USB port, but to the so-called LPT or SCSI ports, for which you will need cords with a special connector. In addition, not all scanners require a USB cable for power supply, and many models should be connect to an outlet using a power cord.

Types of scanners and their compatibility with Windows

Consider setting up a regular scanner and using the WSD service. To do this, connect the equipment to networks, Make sure that scanner included. Click "Start" and go to the "Network" tab. Find the icon scanner and by right-clicking on it, select “Install”. In the User Account Control dialog box, click Continue. Click on the line “Your device is ready to use”, check the settings and click “Close”.

Now click on “Start” again, find the “Control Panel” option, go to “Devices and Printers”. Make sure you have a network connection scanner A. Now perform a scan using the WSD service. Network name scanner and will be displayed on all computers participating in the local connection networks.

note

The WSD service is available in the systems Windows Vista.

Helpful advice

Icon network scanner will be displayed with the name of the equipment being used.

Sources:

• connecting the scanner to the network

Tip 4: How to install and configure a local web server

Here we describe one of the ways to configure a local web server to create a test environment for web developers and web site testers. For of this server You don’t need an Internet connection and you can easily work with several projects at once. The web server works stably and does not require special knowledge when setting up system administration.

You will need

• An operating room will be required Windows system any version, free version installation package Endels_setup web server, which can be downloaded from the website of the developer of this product.

Instructions

Run the local web server installation program Endels_setup.exe. Click the "Next" button.

Specify the location where you want to place the local web server itself and the files of your future projects. It is best to choose a disk with the largest capacity free space.
Click the "Next" button.