Tp link is not included in the settings. How to log into a TP-Link router? Connecting and setting up a TP-Link router

All tips

Routers allow people to send and receive wifi signal. They are truly popular, and manufacturers could not ignore this. More and more router models are being released every day. The problem is that not every user can configure this device themselves. In this article we will talk about how to go into the tp link router settings.

If your Wi-Fi router is connected to a computer, then let's talk about how to enter its settings:

Turn on your computer. Open the browser available on it.
We take the router in our hands and turn it over to the reverse side. We are looking for the item that indicates the device id. 192.168.1.1 is the standard id for the tp link transmitter.
We enter the combination that we learned in the previous paragraph into the address bar of the browser.
A small window appears. It contains two items - “Username” and “Password”. If no action has been taken on your device, the standard data specified on back side. Most likely it is admin/admin.

Username

If everything is done correctly, the tp link router configuration is enabled.

There are times when a Wi-Fi router, despite following all the instructions, does not enter the web interface. If you cannot enter the router settings, then read the next part of the article.

Checking the connection to the computer

Before setting up the router, you need to check its connection. To him in included white network cable. Using it, the router connects to the computer. If you did it correctly, but the problem does not go away, then reboot the devices. It also doesn’t hurt to check all the cables again; they may not be plugged into the ports enough. This completes the installation of the device.

If the Wi-Fi transmitter is connected to the PC correctly, the LAN lights on it will light up.

We are looking for a problem in IP and DNS

This is one of the most popular reasons why you cannot access the web interface on TP link routers. Need to check if this is happening automatic receipt IP and DNS. This is especially true for those who have previously used connections with static addresses.

Step-by-step instruction:

Click right click by the Wi-Fi and connections icon located in the lower right corner of the screen. We select the item that will take us to network management.

Network management icon

We open the window. Execute the following actions indicated in the screenshots.

Item: change adapter parameters

Now you need to open the properties of protocol version 4. Be sure to set the settings exactly like this.

Properties of TCP/IPv4

After these steps the problem should go away. As you can see, setting up the transmitter is not difficult.

Incorrect username or password

If you provide standard login information, but it gives you an error, then most likely you have already used the router. Or the settings are simply lost. This means that you do not know the new account to log in to. Fortunately, the problem can be solved by the following in a simple way. Instructions on how to reset your tp link router:

We find a needle or other thin device.
We are looking for a small black hole on the router. There should be an inscription “reset” next to it.
Carefully insert the needle into the hole. We wait more than 10 seconds.

After this, the Wi-Fi router returns to factory settings. All the information on the back side works for him.

Now you know what to do if your router settings are lost.

Specifying the router address

If somehow you cannot find out the link to the settings, then this can be done without the help of a Wi-Fi transmitter. For this:

Turn on the interpreter command line. Enter the key combination “win” + “r”. A small window appears, enter “cmd” into it.
Have you come in? Great. Enter "ipcongif".
The command line produced a lot of text. We are looking for what is indicated on the screenshot.

The address used by your device may vary.

If you enter the numbers specified in CMD into the address bar of the browser, you will be taken to settings wifi transmitter. This is how you enter the tp link router settings.

Summarize

Setting up a tp link wifi router is easy. Just go to the web interface; instructions for this are listed above. If any problems arise, try rebooting the router or resetting it to factory settings.

Each instruction supplied with a TP-Link router contains a configuration algorithm network equipment, but not a word about solving connection problems. But without access to the software part of the router, the user will not be able to configure the device.

In this article, the reader will learn about TP-Link and its settings. A complete algorithm of actions will be proposed with step by step solution emerging problems. Naturally, to achieve results, the user will have to use all the recommendations.

First start

If we are talking about a completely new device, just purchased in a store and has never been turned on, then the effectiveness of the connection directly depends on the computer settings. In fact, by connecting the wires correctly, as described in the instructions, the user can easily connect the two devices.

Next is a matter of technology: how to access the interface TP-Link router, indicated in the same manual. Must be entered in address bar browser IP address of the network device and when logging in, specify the login and password (they are identical - admin). This procedure is simple and does not require the router owner to have any knowledge in information technology.

Configured network equipment

There are situations when a user purchases a used router. Here the situation can be resolved in several ways. Knowing how to log into a TP-Link router (if the seller changed the factory settings and transferred authorization information to the buyer), you can easily reprogram the network equipment for yourself.

But there are situations when the user does not have information about the router’s IP address, as well as login and password. The problem can be solved simply - you need the equipment to factory settings. This is done special button Reset, which can be found on the control panel. Then the connection is made according to the instructions that come with the router. It also describes in detail how to log into a TP-Link router.

Provider tricks

TP-Link products are quite popular among providers who provide network equipment to their customers completely free of charge (of course, the user must connect on a contract basis). Here the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services very often install their own firmware with their own authorization system. The password, of course, is not shared with anyone.

Before you think about how to log in TP-Link modem, the user needs to make sure that his desires are appropriate. In most cases, the router is already configured and provides access via both wired and wireless channel to the Internet. But there are situations when you need to change your Wi-Fi password or the problem can be solved in several ways. You can ask your provider to change the settings or install factory firmware manufacturer.

Pitfalls in the software update process

It would seem that it could be easier than downloading from the manufacturer’s official website proprietary firmware and install it on the router? But there is a problem. The fact is that the user will not be able to access the “Administration” tab in the device control panel. You can hack anything - both software and hardware. The question here is different: is it really necessary to do this?

How to log into TP-Link without knowing either your login or password? In addition, the network device itself has non-standard firmware. Just. Find out the router's IP address and use special utility pour into the device new firmware forcibly. True, another question arises here: will the provider give its client network settings after learning that he is using a non-branded device.

On the other side of the wire

Thinking about how to log into a TP-Link router, the user forgets that in addition to problems with the network device, inoperability can also be caused by the computer’s failure to “see” the router. LAN card Any PC can be in three states: disconnected, operating in static mode, or obtaining an IP address via DHCP. In the latter case, there should be no problems connecting network equipment. But the first two conditions will have to be dealt with.

Can be disabled in hardware and software. If the device is not detected by the operating system, you need to go to BIOS settings and turn it on (or install the driver). And the adapter is turned on in software via When looking for answers to the question of how to log into a TP-Link router, the user should not forget about the network settings.

User intervention

By going to the “Network and Sharing Center”, the owner should find the “Change adapter settings” item. Next, select the one you need network connection, and after calling the alternative menu of the selected icon, the user needs to go to the adapter properties. Everything is simple here. In the list of active components you need to find the “IP version 4” menu and go to its properties.

In the menu that opens, the user needs to cancel manual settings network by checking the box next to the inscription: “Receive automatically.” This needs to be done for both the IP address and DNS. In general, before logging into the TP-Link WR841N or any other network equipment, it is better to immediately make sure that the computer is configured to automatically obtain the server address and domain name (DNS).

Finally

As you can see from the review, there is nothing complicated about the computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment or changing settings personal computer. But these are ready-made solutions that will really help any user solve connection problems.

When wondering how to access a TP-Link router, any owner should understand that in most cases (99% probability guaranteed) the solution to the problem directly depends only on him. And of course, from knowledge that will always help solve any task.

Hello everyone!! Did you know that connecting and setting up a network on a router scares even experienced computer users. Why set it up yourself if you can call a specialist who will do everything quickly.

However, I will tell you that you don’t need to suffer yourself; the process of setting up and connecting TP-link router models is quite simple, especially if you follow these steps according to my instructions. In today's article step by step explanation will allow you to set up and distribute the Internet to all devices in literally an hour. Yes, yes, and you shouldn’t spend extra money to call a specialist, when you can set up a tp link router yourself easily and quickly.

Explanation: the instructions are suitable for modern models TP-link (not older than 5 years). The settings menu may be slightly different, but you will find the same items. So, let's go...

How to set up a tp link router preface

Before you move on to setting up your router, you need to understand network parameters Internet connection on your computer. Let's say a cable is connected to a laptop or PC. Today, the following network settings options are most often used:

— PPPoE– users can use the Internet only after entering their login and password;

--- Dynamic IP– the system automatically sets parameters of this type, they are issued via DHCP;

--- Static IP– this option is used extremely rarely today, since the user needs to manually enter the parameters.

As for the operating system, the process is performed similarly on Windows Vista, 7, 8 and even on Windows 10. We need to go to the “ Start" and find the tab " Control Panel" - go to " Network Control Center and shared access ».

Now go to the tab " Change adapter settings».

Select active " Connection via local network "(the icon should be blue). Right-click and select in context menu paragraph " Properties».

Don't be scared large quantity items and settings. Usually, many users panic when they see a large number of settings, and they do not know how to configure a tp link router. There is nothing complicated. In the window we need to select “ Internet Protocol Version 4", and then click on the " Properties».

There may be two options here:

1. If the automatic IP address acquisition mode is selected in the settings, then it will be easy for you to connect the router and set the parameters, because the settings will be received automatically via DHCP (this is the Dynamic IP option).

2. If you see filled items in the window and the active inscription “ Use the following IP address", then rewrite all settings. You have selected static provider settings that do not change - this is Static IP. Place a checkmark next to the item “ Obtain an IP address automatically" and confirm your action by clicking on the " OK».

Block Internet access by MAC address

This item applies only to those users whose provider automatically blocks new connections. You can find out this information for sure in the contract. To get around this point, we need to make sure that the router receives the same MAC address that is registered with the provider. Finding out the MAC address is quite simple.

We go to the menu and search bar enter the command “ CMD" and press the "Enter" button.

After this, the command console will appear in front of you. We need to enter the command ipconfig /all and confirm your action by clicking on the “ Enter».

You will see a list of all kinds of parameters, but we need data from the section “ Ethernet adapter – connection via local network" More details on how to find out mac address and what it is you will learn from this article:

How to set up a tp-link router: Detailed connection

So, you can move on to setting up, check that you have the following elements at hand:

A- TP-Link router - the basis that will distribute the Internet to all kinds of devices;

B— provider cable;

C— laptop or personal computer.

The connection is made in an elementary way - this can be seen from the diagram. We insert the cable from the power supply that comes with the router into the connector called Power. We insert the cable from your provider into the main WAN connector of the router, usually it is highlighted in blue. The computer will connect to the TP-link router using a network cable that plugs into any yellow LAN port.

Done, other devices (tablets, phones, TVs, laptops) can be connected via Wi-Fi connection. It's time to move on to the next point of our question today - how to configure a tp link router.

The process of setting up a tp-link router

Setup begins by logging into Internet browser Explorer. In the input line enter the following address: 192.168.1.1 . If you once installed a proxy server, then you need to disable it. After entering the address, a security window will appear in front of you: login – admin, password - admin. By the way, on the bottom of the router itself you will find your username and password, take a look, don’t be lazy!

The router window will appear in front of you. We need to choose a master " Quick Setup" (quick setup) and press " Next" (Further).

Instructions for Dynamic IP - automatic settings.

If your provider provides exactly these settings, then check the box next to Dynamic IP and click the “Next” button.

Now let's set the basic settings:

- In field SSID the name is set future point Wi-Fi connections.

- Chapter Wireless Security is responsible for the encryption type - specify WPA-PSK.

- In field Password you must enter a password.

The remaining settings in this window can be left untouched. Click " Next" The installer will notify us that the settings have taken effect. Click on " Finish"and use Wi-Fi from all devices.

Explanation for users whose provider blocks access by MAC address: go to the router menu again and select the item on the left " Network", and then - " MAC Clone" We enter the characters we wrote down into the appropriate field. If you see that in the field " You PC's MAC"there is already data, then just click " Clone MAC" Don't forget to save your settings by clicking on the " Save" I also suggest that you find out how to set up tp link router with static parameters.

Instructions for Static IP - static parameters

At the beginning of the instructions, we determined what network settings are on your computer. And if you have a Static IP, then select the appropriate item in the TP-link customizer.

The settings correspond to the data from the local network connection, so there should be no problems, but if the installer is in English, you may not understand some terms:

Default Gateway- main gate;

Primary DNS– preferred DNS server;

Secondary DNS– alternative DNS server;

Subnet Mask- Subnet mask.

After completing data entry, click “ Next».

Next come standard settings. In chapter " Wireless Security"You need to select the encryption type - check the box next to " WPA-PSK" Field SSID is for entering the name of the wireless network. Don't forget to put the password in the field PSK Password(at least 8 characters).

Done, the installer tells us that for the settings to take effect, we need to reboot the router - click on the “ Reboot" If you have problems with the MAC address, then use the instructions above - it works for all connection types.

Instructions for PPOE - login to the network using login and password

If you have the PPPoE protocol set, then check the box next to the item with the corresponding name.

The setup here is no different from other connection options. Enter a password to protect your wireless network from “ uninvited guests" - it must be at least 8 characters. In field Wireless Security you need to set the option " WPA-PSK" Regarding the field SSID, then it is intended for the name of your network.

Done, setup completed successfully. Click on the button " Reboot"—after a reboot, the settings will take effect and you will be able to connect to the wireless network. So, we looked at how to configure a tp link router if your provider uses automatic or static parameters.

I suggest you take care of the security of your Internet. I can recommend you to read my articles:

Setting up security for a wireless network

A password does not guarantee that third parties will not be able to use your Internet. They can simply go into the settings of the router itself and look at your password. To prevent this from happening, go to the router setup program and enter the following parameters:

Old User Name– enter admin in the column

Old Password- This Old Password, by default we set admin - enter it

New User Name– this does not affect security, so you can leave it the same

New Password- drive in New Password to configure the router (not to connect to it).

Confirm New Password– enter the new password again to confirm.

Connect to a wireless network

We have created a wireless network, but users may have questions about connecting to it. Using a laptop as an example, I will explain this process. The process is exactly the same on phones, tablets and TVs.

In the lower right corner, click on the wireless networks icon.

The router will ask you for a password - enter it and press the “ Connection».

Important!!!: Enter the password that was specified in the field PSK Password. Sometimes users get confused and enter a password to edit the router settings. If the data was entered correctly, then you should see wireless Internet. The password will be automatically saved, so you won't have to enter it again each time.

I am attaching a video to this article that clearly and clearly shows how to set up a tp-link router

At the end of today’s article - how to set up a tp link router, I suggest you familiarize yourself with the most frequently encountered problems when setting up a router.

1. If you forgot your password

The problem can be solved very simply. We pick up the router and find a small button on the back called “RESET”. Press it for 10 seconds, after which the router will return to factory settings. Come back to Internet Explorer and enter the address 192.168.1.1, login – admin, password – admin. After this, you can configure access again and specify a password that suits you.

2. Problems with connection and operation of the router

Some problems that may arise when trying to connect to a router can be resolved on your own. Sometimes the reason for the lack of connection is mechanical failure gadget.

3. I can’t access the address to configure the router

This problem is common among TP-link users. To get rid of it, you need to follow these steps.

First of all, you need to check what is set in the wireless connection settings. If the DNS and IP address should be set automatically, but your checkboxes are unchecked, then check them again. After this, you can go to the address again and configure the router.

4. Can't connect to the router

Sometimes the router doesn't allow specific device connect to a wireless network. To find out what the problem is, you need to try connecting from another gadget - a computer, tablet or smartphone. If the router does not accept all devices, then try rebooting it. After this, everything should return to its place.

If we're talking about about separate device, then the problem is most likely there. Check if the corresponding boxes are checked in the Wi-Fi connection settings. Sometimes the gadget perceives your network as unsecured, so it does not allow you to connect to it. Set the settings to allow connections to unidentified wireless networks.

Sometimes it helps full reset settings. To do this you need to hold RESET button about 10 seconds (located on the back of the router). After this action, the chance of proper operation will increase significantly. The main thing is not to forget to enter new parameters.

5. The device does not see the network

Unfortunately, there are many reasons for this problem, so it is necessary to go through them all. If the laptop does not find the network, then first of all you should check whether the Wi-Fi module is running. To do this, go to the Network and Sharing Center, then click on the “Adapter Settings” tab. If wireless connection not active ( grey colour), then it should be turned on. Most likely, after this action you will be able to safely connect to the network. We also recommend checking the hardware switch to turn on and off the Wi-Fi module.

If the module is running and everything is turned on, then it’s worth checking the drivers. This applies primarily to laptops. Not always in operating system there are the necessary ones network drivers For a certain model laptop. It’s very easy to check this guess: right-click on the “my computer” icon and select “ Properties" and go to the tab " device Manager».

The screenshot shows the list network devices. IN in this case they are all working properly and have the appropriate driver package. You can see a yellow triangle opposite the network icon, which indicates that the device is not working properly.

The problem can be solved simply: go to the website of your laptop manufacturer, find your model and download network drivers. You will then be able to connect to your wireless network.

6. Problem with the device

Sometimes it is not possible to detect a defect because the fault lies in the device itself. Therefore, you don’t have to rack your brains over the question: how to set up a tp-link router if I met all the requirements listed above and everything was configured successfully. In this case, you need to take the router to service center under warranty (if any).

The defect can be mechanical or software. If everything is clear mechanically, then a software defect implies a malfunction in the router firmware. You can restore it yourself, but this process is much more complicated than setting it up. Also incorrect installation firmware or a failure can completely disable the router completely.

So, to summarize today’s article, I would like to tell you that you cannot always connect to the Internet because of the router. There may be some network problems. To check this, unplug your ISP cable from your router and connect it directly to your computer. After that, go to the Network and Sharing Center. Turn on your local network connection and try to access the Internet.

If it works, then the problem is really in the router. Sometimes the device does not allow a certain device to connect. To correct the situation, you can try pressing the automatic router button, which is located on the back wall of the router. All active devices with enabled Wi-Fi modules will connect automatically.

Well, for today that’s all I wanted to tell you about today in terms of: how to set up a tp-link router. I hope you found the article interesting. I would be glad if you have something to add to all of the above. I'll see you in . Bye-bye everyone!

Hello! In almost every article in which I write about setting up routers, or about solving some problems with wireless networks, I write about how to enter the router’s control panel to change some parameters, etc. And frankly, I'm already tired of constantly writing the same thing :). So I decided to write about this in a separate article. Yes, and there is nothing to write about here, but still, many people have problems with this.

On almost all routers, even different companies, entering the settings is almost no different. But I will show using the example of TP-Link devices.

Let's first figure out how the router should be connected. Everyone (including me) recommends connecting the router via network cable to a computer or laptop. But, if you just want to make some settings, you can connect via a wireless network or even from a phone or tablet, nothing bad will happen.

Do not update the router firmware when connected via Wi-Fi! Only via network cable!

This is understandable. You must be connected to your network. By cable or Wi-Fi.

Go to the control panel

Open any browser. Internet Explorer is also possible, but better than Chrome, Opera, etc.

Now attention! Take your router and look for a sticker on it that says miscellaneous information(model, version, etc.).

We need to look there IP address(usually 192.168.0.1, or 192.168.1.1) and password login to access settings. If you haven’t changed them, then these are most likely admin and admin.

As you can see, I have IP: 192.168.1.1. So we type this address in the browser, in the address bar, and go to it.

A window should appear asking for a password and login.

Enter the username and password that are written on the router. Not to be confused with the password for the Wi-Fi network!

If you have already changed this data during the setup process, then most likely you will have to do a complete reset so that the password and login are back to default.

After pressing the button Send we get into the settings. Depending on the model (firmware version) and manufacturer, they may differ.

If you have any problems, be sure to read this article – https://f1comp.ru/sovety/ne-zaxodit-v-nastrojki-routera/. In it I tried to consider everything possible reasons, due to which it is impossible to access the settings.

Here is such a small instruction, but I hope it is useful.

There are two ways to configure a TP-Link router. The first one is suitable for beginners and inexperienced users if they need a basic device configuration to connect to an Internet service provider while working at home WiFi networks. The second is for advanced users with the ability fine tuning router and its wireless network, connections digital television and SIP phone.

Whatever option you choose, in any case, to access the web interface of the TP-Link device, you need to open a web browser and enter its IP address in the address bar - 192.168.0.1 or 192.168.1.1. If you have any difficulty - which one is used on your router, then try logging in using the hostname: tplinklogin.net. Or, alternatively, look at what IP is indicated on the sticker.

1. TP-Link Quick Setup Wizard

If you went into the router settings for the first time, then by default it should start Quick setup. If necessary, the wizard can be called from the main menu by clicking on the appropriate link.

The most commonly used are the following:

Dynamic IP
- PPPoE
- L2TP

In the first case, there is no need to specify anything additional.
If your provider uses the PPPoE protocol (Dom.ru, Rostelecom, TTK), then at the next stage you need to enter your login and password to connect to the Internet.

And in the case of L2TP, like Beeline, you will also need to enter the VPN server address:

tp.internet.beeline.ru

Next step - WiFi setup on a TP-Link router:

In the "Wireless network name" field enter the name the network being created. For example - "my-home-wifi", Make sure that the "Region" field is set to "Russia", mixed mode is used and the channel and channel width are automatically selected. In the "Wireless Security" section, check the box for "WPA-PSK/WPA2-PSK". In the "PSK Password" field, you must enter the Wi-Fi password that the router will request from clients when connecting. Click on the “Next” button.

Quick setup of the TP-Link Wi-Fi router is completed. You can connect the provider's cable and use it.

2. Configuring a TP-Link router via a regular web interface

The first page that you will see when you enter the web interface is “Status,” which displays status data from the current state of the device - connection to the Internet, local and wireless networks.

In order to set up an Internet connection on TP-Link routers, you need to select the menu section Net> WAN.

Dynamic IP address (DHCP)

This is the simplest option, which is used in some branches of Rostelecom and a number of smaller providers. To configure Dynamic IP, you need to select the appropriate option in the "WAN connection type" list:

For some operators, it is also necessary to change the MTU size values, but this is rare. However, if problems arise, please check with technical support. Click the "Save" button and check your Internet access.

PPPoE (Rostelecom, TTK)

The PPPoE protocol is most often found among Russian, Ukrainian and Belarusian telecom operators. For example, Rostelecom, Dom.ru, Ukrtelecom and ByFly.

In the "Connection type" list, select the "PPPoE/Russia PPPoE" option. Below you need to enter your username and password for the connection. They are usually indicated in the contract for the provision of services or are given separately on a piece of paper with connection details. Below, make sure that in the “WAN Connection Mode” section there is a “Connect automatically” checkbox. Click the "Save" button.

VPN via L2TP protocol (Beeline)

In Russia, this option is used only by the Beeline provider (formerly Corbina-Telecom). To configure it on a TP-Link router, you need to select the WAN connection type - "L2TP/Russia L2TP":

Then enter your username (in Beeline this is usually the number personal account) and password for connection. In the "IP address/Server name" field you need to enter this address:

tp.internet.beeline.ru

Set the connection mode to “Connect automatically”. Click on the "Save" button.

3. How to set up Wi-Fi on TP-Link (TL-WR740N, TL-WR841N, TL-WR941ND, etc.)

In order to set up Wi-Fi on a TP-Link router, you need to select the section " Wireless mode" (Wireless). The main parameters are located in the subsection "Configuring the wireless mode" (Wireless Settings):

The "Network Name" line is the so-called SSID. Here you need to enter the name of your home WiFi. For example, this is “home-wifi”.
It is best to set the region to "Russia" or "Europe". We leave the remaining parameters at their default values. As a rule, they fit without problems in most cases.

Go to the “Wireless connection protection” subsection:

Here we check the box for WPA-PSK/WPA2-PSK (Recommended).
In the "Version" field, select the value "WPA2-PSK" with AES encryption.
In the "PSK Password" field, you must enter a set of numbers and letters that will be used as a password for Wi-Fi. It is advisable to make it no shorter than 8 characters and as complex as possible - your safety depends on it.
Click the "Save" button.

WiFi 5 GHz

On dual band routers TP-Link TL-WDR3500, WDR4300, as well as Archer C2 and C7 can also configure Wi-Fi in the 5 GHz band. To do this, go to the 5 GHz Wireless mode section.
First, open the general settings:

Here we also write down the network name and region - Russia.
Without touching anything else, click on the “Save” button.
Let's move on to the security settings:

We set the standard "WPA2-PSK" with "AES" encryption.
Let's save.
The setup of the TP-Link router (Internet + WiFi) is completed.

This manual is relevant for the following models: TL-WR740N, TL-WR741ND, TL-WR743ND, TL-WR840N, TL-WR841ND, TL-WR842ND(RU), TL-WR843ND, TL-WR940N (450M), TL-WR941ND (450M ), TL-WR1043ND, Archer C2 and C7.