Quiet speaker on a new phone. Why there is no sound on the phone - reasons and explanations
Trying to find a way to increase the speaker volume on Android, you will probably come to this page.
And rest assured, here you will find this method, and more than one.
The best option At the same time, intuition or the “trial and error” method will help you choose from the proposed set of methods.
In any case, you will be pleased with the result, but for now let’s start looking at the problem.
Content:What you should pay attention to?
Sound problems, one way or another, can occur with any device - both budget and quite expensive.
However, the ways to solve these problems are almost identical, since the software part of systems of the same generation will always be similar, even with some differences.
Accordingly, minimal differences in the setup process will be associated to a greater extent with the features of the version operating system.
As for the sound features of the device itself, it is worth noting that the differences between the sound of expensive and budget device will still be noticeable.
And not all software are able to correct the sound quality of the speaker or based on Android.
Thus, if the sound produced by such a speaker is increased, hardware problems may arise as a counterbalance.
For example, the speaker will begin to produce sound at unauthorized frequencies and, as a result, the sound will appear extraneous noise, including squeaks, wheezing, crackling and possibly popping sounds.
Therefore, when selecting settings, keep in mind that similar problems may occur and try to avoid mistakes in order to maintain the functionality of the device.
Standard way to solve the problem
Before moving on to the most stringent control measures on Android, let's look at the rules standard adjustment volume.
Note that volume control can be done both globally for all sounds in the system, and for individual applications, which is especially important when you seem to have set the sound to full volume, but in the media player the composition is played quietly.
In this situation, everything can be solved mechanically, i.e. using the volume rocker key.
It should be used not when the desktop is displayed on the screen, but precisely when a given application is running.
For example, in conversation mode the volume will be adjusted specifically for communication, and when viewing a gallery, the volume of the video being played will be adjusted.
Using this method, most users come to the conclusion that in some situations the sound of a smartphone is excessive, and in other situations it is insufficient.
The correct way to solve the problem
The second way to adjust the sound involves using other standard means– software.
Their functionality is limited to just a few categories that regulate sound volume:
- calls;
- talk;
- system sounds;
- media files.
It only takes a few steps to get to these adjustments. The first step is to find the system application called “Settings”.
Its shortcut looks like a gear, regardless of the applied theme.
It is inside it that hides the hinges, thanks to which you can fine-tune the sound of each of the above categories.
It is worth noting that the clarity of such adjustments leaves much to be desired, despite the modern interface.
However, after playing with the hinges using short and long taps (with holding), it is not difficult to understand how the application works.
Moreover, if these settings are set to maximum, this will only be a limit that the device manufacturer or proprietary developer does not allow to be violated. firmware at the base and in order to disrupt them, it is necessary to use other methods.
Rice. 2 – Volume control window
Software method for solving the problem
When the built-in capabilities of a gadget seem insufficient, the user’s first reaction is to use third-party software. There are a great many of them in.
But before you give up searching for it "Volume Booster", it is worth paying attention to the fact that not all software tools give complete freedom of action.
Some applications have rather narrow functionality and simply maximize the hardware power of speakers and microphones, which is completely wrong, and a similar result can be achieved using hidden built-in tools, which will be discussed later.
In the meantime, let's pay attention to the fact that with the help of one application you can not only improve the sound, but also improve the quality of the reproduced sound thanks to the special software tricks used.
Therefore, it would be more correct to look not for a volume increaser, but for something like an audio center or utility for.
Dolby Atmos can be considered one of the most successful for Android.
She has intuitive interface co, which will allow you not only to increase the volume to maximum, but also to customize the sound to your own taste.
Advice: look similar programs in category system applications. Among them there are both paid and free versions for every taste.
Rice. 3 – Sound settings application
Hidden built-in tools
If you don’t want to pay for volume control, you can use standard settings that are hidden from the average user.
They are available in the so-called developer mode or “Engineer Mode”. Unfortunately, it is not available for all Android-based firmware and access to it is protected.
Each gadget manufacturer decides for itself whether to use its own access code or a standard one, or perhaps completely block the user’s access to these settings.
To find out, you need to go to dialing mode.
To do this, click on the icon with handset(usually located in the lower left corner of the desktop), and in the window that appears, select the icon with keys labeled “Phone”.
After this, you can enter the code corresponding to the manufacturer's brand from the table below:
| ZTE | HTC | Sony | Philips | Samsung | Alcatel, TEXET, Prestigio, Fly | smartphones with MTK processors | |
|---|---|---|---|---|---|---|---|
| *#*#3646633#*#* | + | + | + | + | |||
| *#*#4636#*#* | + | + | + | ||||
| *#*#8255#*#* | + | + | |||||
| *#*#3424#*#* | |||||||
| *#*#197328640#*#* | + | ||||||
| *#*#7378423#*#* | + | ||||||
| *#*#3649547#*#* | + | ||||||
| *#*#13411#*#* | + | ||||||
| *#*#3338613#*#* | + | ||||||
| *#*#54298#*#* | + |
The column headings indicate the brands of gadgets, and the row headings indicate the developer mode access codes compatible with them.
Not all brands are represented in this table simply because they use individual access codes, for example:
- *#*#2237332846633#*#* for Acer;
- *#*#2846579#*#* and also *#*#14789632#*#*
How to increase volume and sound on Android in 1 minute!
We increase standard volume on an android smartphone
The speakers are very popular and widely used. They are in every home. But speakers very often produce poor quality sound or no sound at all. Exist different types damage, and some of them can be easily identified and corrected.
To check the speaker, we inspect it. The housing, cord, corrugation, diffuser and other parts of the speaker must be intact, without damage or defects. If there is damage, the speaker will not work or will function poorly. If there is no visible damage, but extraneous sounds are heard (defects, crackling, lack of sound), you need to check the contacts for defects - connect an ohmmeter to the terminals and move the contacts while the diffuser is stationary. If the instrument needle moves, the wires are damaged. In this case, the wires need to be replaced. Turn over and twist the speaker. If you hear extraneous sounds and knocking, then part of the coil turns or all of it has fallen off the sleeve. This can be corrected by rewinding the reel. Pay attention to the voice coil - a wire wound in the form of a ring. It is located inside the speaker. The voice coil must be wound smoothly, without breaks or defects. If there are breaks or defects, the coil should be replaced. If the winding is sloppy, you can rewind it. You need to listen to a few familiar songs. When listening, we pay attention to the volume (maximum and minimum), quality and sound transition.
You can check the condition of your speakers using these simple and straightforward procedures. For a better understanding of the information, watch the video.
As a result of the fact that mobile device The new generation is an expensive item; in the event of one or another breakdown, repairs must be entrusted to people who are specially trained in this matter. After all, if you do the repairs yourself, you may end up damaging the device rather than putting it in order. But you should also understand that there are times when you can do the repair of a particular part yourself, without spending any money. Quite knows how to clean the speaker on your phone a large number of of people. Let us consider this topic in this article further in detail. So, let's find out how to disassemble the phone.
Such a problem as poor sound when talking on the phone occurs due to the fact that the mobile device has already served for quite some time. long time. As a rule, the sound creaks due to contamination of the speaker or the phone “swallows” a large number of words. Nothing can be better to solve this problem than cleaning the speakers on your phone. Our task is to disassemble the device and clean the speaker mesh from dust and dirt to improve the quality of the conversation.
Poor sound from speakers
The bad sound produced by the speakers makes its own adjustments to telephone conversations between people. This problem refers to those that can be solved independently. If you don't know how to do this, but want to try, this article will help you.
How to clean your phone speaker at home? Reason bad sound There may be contamination in the hole in the case, as well as contamination in the mesh itself, which is located under the body of your phone. Often such problems begin after 6 months from the date of purchase and start of use of the telephone device. Below are all the details about the actual cleaning.
How to clean speakers
How to clean the speaker on a Nokia phone? It's quite simple. First of all you need to check outer shell dynamics. After all, the whole point may be in her. So, let's start working with this part. For this procedure you will need a toothbrush. Naturally, the brush must be old, because then, of course, you won’t be able to brush your teeth with it. You should use this same toothbrush to move along the speaker grid. It is worth noting that the movements must be circular. You need to try to make sure that the bristles get inside the mesh and clean it from dirt and dust. But you should also understand that you cannot press the brush too hard, because you can damage the mesh of the speaker itself, and then you will definitely need to take the phone to a service center.
Speaker cleaning procedure
It takes a few minutes to carry out work of this nature. Next you need to blow out the speaker mesh. Very often people use in this procedure chewing gum, which has already been thoroughly chewed. They just put it on the speaker and it pulls out all the unwanted bits. This operation must be performed several times, and then simply wipe the phone with a clean napkin.
Once your device is dry, you can check the sound quality. It must be of high quality and clear. Now you know how to clean the speaker on your phone. But this is only one way.
It happens that such cleaning does not bring the desired results. Then you will need to use a different method. Let's look at how to clean the speaker on your phone in this case.
Second cleaning method
So, the second method for cleaning the speaker. The question of how to clean the speaker on your phone, in this case, includes two types of solutions. In the first option, you only need a needle and accuracy. But in the second, of course, knowledge of how to disassemble the phone and the same accuracy.
When you use a needle, you need to be very careful, because you may not clean the speaker mesh, but simply pierce it and completely tear it. In this case, you will have to turn to more trained people.
To clean the speaker, you need to carefully move it along the mesh, clearing it of excess deposits, and shake it out.
The second method is to disassemble the phone, or rather, one of its parts. You can remove the speaker of this device. In this case, its cleaning will take place with greater efficiency. You can also rinse your device with hydrogen peroxide, which will kill all accumulated bacteria, and your phone will continue to delight you with its clear sound.
Let us immediately note that owners of Fly smartphones and other Android devices rarely encounter a situation where the speaker on the phone does not work. But if this does happen to you, don't panic. Often the problem can be solved simply at home or, at most, in service center. First of all, let's figure out why this problem occurs.
Why doesn't the speaker on my phone work?
There may be several reasons:
- incorrect sound settings;
- incompatible application;
- selected specific mode sound;
- problems with the software;
- clogged conversational or polyphonic speaker;
- damaged headphone jack;
- moisture ingress;
- hardware failure (lost contacts, burnt-out speaker and other hardware failures).
The speaker on the phone does not work: what to do?
Determining the cause of the malfunction is already half the battle. After all, this is the only way to understand how to act to solve the problem.
Speakers and headphones don't work
If there is no sound coming from your speakers or headset, check your settings. Perhaps you just accidentally disabled it. To do this, press the “rocker” on the side of the device up or go into the smartphone settings, select “Sound and vibration” (or similar) and set the desired volume level.
Do not confuse problems with sound and simply unsatisfactory sound for you personally. It is possible that simply setting the equalizer will be enough for you to adjust the playback according to your taste.
If the sound is not reproduced at all, it wheezes, is interrupted, or you can’t hear your interlocutor well, perhaps the problem lies in software glitch. In this case, you should restart your smartphone. For Android devices, to do this, you need to simultaneously press the rocker up and the power button and then select restart.
Sound is only played through the headset
If the speakers do not work, but sound is played through headphones, you can use the following solutions to the problem:
If these methods do not help, your smartphone will probably need serious repairs. We do not recommend doing it yourself - it is better to contact a specialized center.
And remember, in order for the device to work correctly, first of all, you should always follow the rules for using the smartphone.