The phone does not accept incoming Android calls. IPhone is not receiving calls

You dialed the number of the person you need, but for some reason when you call there are no ringing tones. Sound familiar? In essence, this is the so-called pattern break. After all, since the advent of automatic telephone communication, the standard procedure for calling a subscriber is as follows: dial desired number, after which there are ringing beeps in the handset, which mean that the called recipient, at the “other end of the line,” is receiving calls on the telephone. With the advent mobile communications this procedure almost hasn't changed at all, except that clients cellular communications can connect to a service that will replace beeps with pleasant music. But what to do when, having dialed the desired number, you do not hear the usual signals, that is, there are no beeps and why did this happen?! Let's figure it out together!

Before proceeding to any action, I still advise you to call the number again. Perhaps it was a single short-term failure and the connection was restored!

Reasons why there are no beeps in the handset

In fact, the reasons similar phenomenon there may be several, but the most basic ones, due to which there are no beeps when you call a person, are either communication problems, or the telephone is broken. In addition, a lot depends on what kind of connection you use - landline wired or mobile.

Cable connection (home phone)

Despite the fact that in last years ordinary landline phone has almost lost ground, there are still quite a lot of people who use it. Mostly these are either elderly people or some companies and organizations.

If you don't get dial tone when calling from home phone, then first listen to see if there is a beep at all when you pick up the handset. Quite often people pick up the phone and dial the number without checking whether it works telephone communications at all.

When there is no readiness, this is usually indicated by a break in the line from the distribution cabinet to the telephone, or problems with the cable from telephone exchange to the closet. The malfunction could have been caused by various excavation works carried out near telephone line, cable breakage due to damaged equipment, flooding of distribution boxes and cabinets, etc. Until the installer restores the line, there will be no connection.

By the way, quite often line damage occurs in an apartment. For example, children accidentally broke the wire, a cat chewed it, and it rubbed against something.

Mobile communications (cell phone)

When there is no dial tone when calling from mobile phone, then most often this means a failure of cellular communication caused by the fact that you are in an area of ​​​​uncertain signal reception, or there is no coverage of your telecom operator in this place at all. In this case, “No signal” appears on the display.

Try redialing the number a few more times. Sometimes rebooting the phone helps.

It also happens that the culprit of the problem is the incorrect operation of the phone itself. For example, some application is installed that blocks incoming calls.

Unfortunately, in cases where there are no beeps when calling due to a breakdown cell phone or a smartphone, there is no other option but to take it for repairs.

Often Android users are faced with the problem of blocking incoming calls. The phone does not display information about the incoming call, but your interlocutor receives automatic message about the subscriber's unavailability on the network. Of course, Android does not accept incoming calls and deprives the phone of it main function– opportunities to connect two interlocutors. This problem may occur due to a malfunction software smartphone, breakdown GPS module or if there is a problem with the settings. Let's try to solve the problem when Android does not accept incoming calls.

Airplane mode.
When setting up your phone, you may accidentally turn on airplane mode. Choice this profile characterized by the fact that everything active networks will be unavailable, but the phone will work. You will not be able to call, send SMS or use the Internet; incoming calls will also be blocked. Offline mode Widely used during flights, as well as to preserve battery charge. To turn off this mode you need to perform a few simple operations: hold down the power button of the smartphone, turn off Flightmode.
The SIM card is faulty and the Android is not accepting incoming calls.
There are times when the SIM card barely touches the phone contacts. This may be caused by a broken slot, unusable card, or loose fasteners. If the card has been sent, then on the phone the network will disappear, and you will not be able to use communication services. A message indicating that there is no SIM card will be displayed on the screen. Your actions in this situation are extremely simple: take out the card, wipe the chip, insert the card back. Did it work? Great. If the network is still not identified, then the problem is most likely in the slot. To fully verify that the equipment is not working, you should insert another card. If there is no network, then we can safely take the phone in for repair.
There is no signal and the Android may not accept incoming calls.

The coverage area of ​​each operator is different. Don't be surprised if your phone doesn't recognize the network in the forest - it's justified weak signal. Also, most phones begin to lose the network in large ravines, remote places, and basements. To restore the network, you need to find a coverage area and the Android will again accept incoming calls.
There are also a number of internal problems that cause network loss. There is no way to deal with such breakdowns at home, because you need special equipment and spare parts. To carry out repair work, it is better to contact a specialized company that will repair your phone.

Many smartphone users encounter this problem when the phone does not accept incoming calls. There are many reasons why this can happen, ranging from a banal software failure to a hardware failure. Today I would like to talk in more detail about the most common reasons why incoming calls are not accepted. Well, and, of course, they will be given useful tips for troubleshooting. Well, let's get straight to the point!

Software glitch

One of the most common reasons why the phone does not accept incoming calls is a malfunction operating system. This is quite a common occurrence, so there is nothing special about it. In general, failures and disruptions in the operation of the OS can be caused primarily by not very good firmware or poor system optimization. As a rule, cheaper phones are from not very famous brands are more often susceptible to this “phenomenon”.

To correct this problem maybe two different ways. The first one, which is also the simplest, is to reboot the phone. You can even simply remove the battery for 10 seconds, then insert it back and turn on the device. In most cases, this solution helps.

The second method is to reset to factory settings. If the first solution did not help, it means that the failure occurred at a more global level, and a simple reboot will not fix it. In this case, resetting the settings to their original state helps a lot. You can perform this procedure through the device settings.

Airplane mode

The second reason why the phone does not accept incoming calls is airplane mode. Many users like to use the Airplane Mode function so that no one will disturb them for some time. But, as practice shows, very large percentage forgets to turn it off afterwards this function, as a result of which they do not receive incoming calls.

The solution to this problem is incredibly simple - you just need to disable this function. This can be done either through the status bar or, as it is also called, the “curtain”. You can also disable “Flight” through the settings in the “Networks and Connections” section (on different phones, this section may be called differently). “Airplane mode” is also disabled through the shutdown menu, which is activated when you hold down the power/lock button.

Incorrect network definition

The next reason why the phone does not accept incoming calls is incorrect network detection. Usually the phone automatically detects the network on its own mobile operator, but sometimes malfunctions occur, as a result of which the device switches to the wrong frequency.

To fix this problem, you should do 2 simple steps:

1. Go to settings and go to the “SIM cards and networks” menu.
2. Next, you need to select the section “ Mobile networks"and put the definition there either on auto mode, or search and select the necessary network, according to your mobile operator.

Radio module malfunction

The next reason why the phone does not receive incoming calls is a faulty radio module. Unfortunately, nothing can be done about this. Often, communication modules in devices fail. This can happen due to manufacturing defects, frequent falls of the device, moisture getting inside, etc. The problem can only be corrected in one way - by replacing the module with a new one.

Antivirus for Samsung

Well, at the end there is a small point dedicated to Samsung smartphones. Very often, many owners complain that their Samsung phone does not receive incoming calls. This happens not only because of the above reasons, but also because of another, separate one, which concerns only devices of this brand. The fact is that if you install Dr. antivirus. Web on a Samsung smartphone, the application automatically blocks most of the numbers from which incoming calls will not be received.

There are two ways to fix this problem. The first is to remove the antivirus and find a replacement for it. The second is to go to the application settings, go to the “Profile” item and there check the box next to “Receive all calls and SMS”. It's simple!

Under Android control. What to do and how to fix it.

Many users encounter a problem when phone or tablet on Android based starts to be capricious. It seems that nothing happened that could cause a malfunction, but it does not work as it should.

For example, the device has problems with the fact that it is not possible to answer an incoming call, or the device cannot be reached, although the call is in progress. The reason for this may be:

1st: Software glitch - i.e. the problem is a software glitch

2nd: Hardware failure - i.e. the problem is in the hardware (i.e., replacement or restoration of spare parts for the gadget is required)

However, do not rush to get upset - in 90% of cases there are problems reception system operation voice calls and messages smartphone a or Android tablet is to blame software glitch which you can easily fix on your own.

Fixing a software glitch:

Method 1. Quite simple - go to "settings", find there « backup and reset", in which you choose full reset settings with deletion of all data. Be careful, using this method is often effective, but it entails deleting all photos, contacts, passwords, music, games, videos and, in general, all information stored on your smartphone e or tablet e. Therefore, first save everything you need by connecting the gadget to your computer. If this method does not suit you, or if after this the problem is not resolved, see Method 2.

Method 2.

Based on solving problems with communication and network reception phone number and tablet based Android method implementation of additional software. Utilities that control all processes inside gadgets. Today, there are quite a lot of them, however, the fewer functions an application contains, the more effective it is, as a rule. Best monitors system functions, adjusts, and fixes everything possible mistakes settings and synchronization is small and easy to use, free utility for Android devices. Download the app from Google Play and watch it additional options in the description it is possible . After installing the application, all that remains is to launch it. Further, in principle, nothing more is required from you. The application will take full control of the device's functions. (By the way, among other things, the gadget will begin to charge 20% faster, and its performance will also increase significantly, which will affect the loading speed and operation of all applications, games, and the system as a whole. On average, after scanning, the system runs at 50% faster.)
Method 3.

Changing the device software, or as it is also called "re firmware ".This method, as a rule, requires certain skills and can be resolved by contacting the Service Center. To carry out this task yourself, you need to contact the website of the manufacturer of your device, download the utilities necessary for flashing the firmware and the firmware itself, and then reinstall it on your gadget.

If none of the methods brings results, unfortunately, you will have to contact Service center For repairing your tablet a or smartphone a.

Incoming calls are not received or the handset does not pick up when incoming call on a smartphone or running Android. What to do and how to fix it.

Sometimes situations arise when you have a phone on your desk or in your pocket, but for some reason calls are not being received. Why doesn't your phone ring? Let's look at a list of typical reasons.

Why doesn't my mobile phone ring?

Why does it happen that you can’t make a call from a cell phone or even receive a call?

• Problems with the SIM card. The phone may not work if you leave the service area. See if your operator is detected on the phone. Or maybe the monitor says, “No network.” If there is no network, but you are sure that you are in the access area, remove the SIM card from the phone and insert it again. Perhaps she just moved away. If this doesn't help, insert the SIM card into another phone. If it doesn’t work on another device, that’s the reason.
• Battery problems. The reason that you cannot call from your mobile phone may be due to discharge or failure battery. In this case, charge your phone or buy a new battery.
• Damage to the phone. The reason may be in the phone itself. Water could get on it, you could drop it. Perhaps your phone has already exhausted its resource or you got a low-quality device. To find out the exact cause, contact a workshop.
• The account has run out of money. True, in this case, they will most likely be able to reach you, but you will not be able to make a return call until you top up your balance.

Why doesn't the landline ring?

Now let's see why the landline phone doesn't ring.

• No payment. Remember if you forgot to pay for telephone services. Check with your operator about the status of your current account.
• Nutrition problems. If you are using a cordless phone, make sure its battery is charged and the base is connected to the mains. Without this it will not work.
• The device is faulty. Check that the telephone itself is working properly. To do this, plug the phone into a socket in another room where there is definitely a telephone connection. If the device shows no signs of life even there, take it for repair or replace it with a new one.
• Problems with the cable. If it turns out that the device is working, check the presence of contacts at the places where the wires are connected. Look to see if the wires coming from the handset to the device and from the device to the outlet have come loose. Has anyone pulled the telephone plug out of the socket? Is there a break in the telephone cable coming from the panel? After fixing these problems, your phone can work.

Read also the article