Technical malfunctions and error codes of tricolor TV.
Error 3 Tricolor TV produces the expression: “No access” - it follows that the channel has no access to your receiver. Service providers individually encrypt their channels and signals so that the machine can separate the channels into “its” and “others”. In this regard, when the receiver finds a channel with an encoding different from Tricolor TV, it is not able to display the image on the monitor, and it shows an error.
Decoding of Tricolor TV channels.
Tricolor error 3, what to do? The initial way to correct the error is to decode it yourself. For this you will need:
- Turn off the receiver.
- Then turn it on.
- Follow the decoding instructions.
- Signal decoding takes up to 8 hours. Leave the equipment turned on during this time.
Resetting the settings in the settings section may also help you. After this, reboot the device and search for channels again.
U Tricolor error 3 no access is one of the most common. The reason for this error to occur is the inadmissibility of reading encoded information. To troubleshoot problems, you need to leave the receiver for decoding. To complete this process, you need to turn on the receiver on some of the encrypted channels and forget about it for a period of time from 3 to 8 hours.
Tricolor coded channel. Error 3.
Tricolor no access to view error 3. The user manual for Tricolor TV equipment provides an explanation for this error: “No access to view. Coded channel." This means that the receiver is not able to decrypt the data received from the antenna.
Because main reason If a malfunction occurs, the receiver is unable to read the encoded information, then it needs to be decoded. During decoding, the Tricolor search engine will send new sources of activation to the area where the set-top box is located.
Receiving Tricolor command codes
It is important to know, how to fix error 3 Tricolor. Let's say the user waited certain time, but the TV still does not have access to the Tricolor review, and error 3 has not been resolved. The problem may be that the equipment did not automatically receive codes to prepare for operation. In this case, you can make a request and receive them again. Here's what you need to do:
- Login to your personal account on the provider's website.
- Using the “My Products” tab, click on the “Send activation commands” button.
If the subscriber has followed all the instructions, but the sagging on Tricolor TV has not been eliminated, you need to contact the support service, who will be happy to help you. Video about Error 3 on Tricolor TV.
Ask your questions in the comments. Let's help each other with problems and errors of Tricolor TV.
If you encounter other Tricolor TV errors, pay attention to the section
Recently, Tricolor-TV subscribers have been experiencing error 4 with the text “No access to view. The TV and radio channel is not broadcast by the operator.” As a rule, this happens after updating the software on the receiver. This problem first appeared in the summer of 2017 after a large-scale update of all receivers from the GS B520 to the GS532M. Then it was impossible to get through to technical support! What is noteworthy is that error 4 on Tricolor appeared only for those who first updated the module. As it turned out later, if the receiver’s firmware was first updated, then everything went like clockwork and no errors arose.
Instructions on how to fix error 4
In fact, the solution to the problem is quite simple and you don’t need to carry the receiver to the service center or look for some master. So, what needs to be done to remove error 4 on Tricolor TV?!
Method 1.
This is the easiest way to remove error 4 on Tricolor, but it works if the channels are not shown due to a software problem. Everything is done as follows:
Use your remote control to go to a channel Telemaster Under the number 333 . A window should appear asking you to update the device software.
We agree and wait for the process to take place. This takes approximately 20-25 minutes, after which the receiver will automatically restart. This operation will correct error 4 in most cases.
Comment: If the device is not flashed through channel 333, you can try update via USB port. To do this, you need a flash drive with a capacity of no more than 4 GB.
You can download the firmware for your receiver on the manufacturer’s official website - link.
We format the flash drive for file system FAT32 and copy the file with the software to the root folder of the disk. It must be unpacked from the archive.
Connecting removable storage into the USB port and reboot the device. Next, the receiver itself must find the firmware file and offer to install the update.
We agree. As soon as the procedure is completed, the device will restart. With the new software, error 4 on Tricolor TV should disappear.
Method 2.
Step 1. We pick up the remote control from the receiver and press the “Menu” button to open the general menu of the device on the screen.
Step 2. Go to the “Settings” section:
Step 3. Let's do factory reset. The menu may differ from the one shown in the picture, but this changes the meaning!
Step 4. Turn off the Tricolor TV receiver and unplug the plug from the socket for 15 minutes.
Step 5. Turn on the receiver again and start searching for channels.
It's not news that CI+ is now used on modern TVs with built-in satellite tuner(Samsung, LG, Sony, Philips), as well as some alternative satellite receivers.
As you, Friends, already know, I have become a fan of the LG brand. That’s why we’ll talk about the tricolor module itself and everything connected with it.
I'll start by describing what, how and why.
The tricolor module itself only works in slots with CI+ support. For TVs this is not a problem, that's it modern models support CI+, but satellite receivers with such support are rare.
Although there is a shift in the good direction here too. Good budget employee, satellite receiver, for many it’s just that!
Or even this option... receivers that are suitable for both CI+ and card sharing, receiver .
But we're talking about TV, which is good option watching TV without additional equipment. Although most TV brands meet these requirements, you should carefully study the specifications before purchasing.
Since the CI+ module is new development, many people face difficulties in initial setup and operation of the CAM module.
The most unpleasant thing is that installing modules on TVs different manufacturers, varies and sometimes very seriously.
By setting up the tricolor module itself on LG TV.
1. Install the Tricolor TV smart access card into the module conditional access Tricolor TV (CI+). Chip to the thick side of the module.
2. Install the conditional access module into the switched off TV.
3. Turn on the TV and look at the information about the module and access card; if there is no information or error code 17, check the installation is correct and register the equipment on the Tricolor website.
4. In the converter settings satellite dish Tricolor indicates Eutelsat 36A/36B satellite. Single converter type. Converter power (LNB) - on. LNB 10750. Transponder frequency - 12226 MHz (default settings).
Let's look at the signal quality.
5. Go to channel settings and turn on automatic search(in new generation TVs) transponder frequencies from 12190 to 12418 will be registered automatically.
6. If everything went well and the channels are found, go to the sound settings on the TV and set the MPEG parameter in the “Digital TV sound settings” section. This is done so that the sound on the channels does not disappear during viewing. Go to the module settings and select “Reset to factory settings”. Turn off the TV completely.
Problem.
A common problem during the initial initialization of the module by the TV. The TV sees the module, all information about the module and card is displayed in the menu, however, when the channel is turned on, it writes an error.
In such a situation, you need to act as follows: turn off and turn on the TV.
After turning on the TV, the access rights check between the TV and the module will begin again. In most cases, this method helps.
It also happens that after a voltage drop in the network or a sudden power outage, the settings of the module itself may be lost. Then the access rights check will not be carried out until the CAM module settings are reset to factory settings through the TV menu.
Now regarding the problems associated with software of modules and televisions. Problems incorrect operation with modules are usually found on early model TVs.
But, fortunately, these problems can often be eliminated by installing the latest software for your TV. As for the module software update, it occurs only from the satellite.
Other solutions to problems.
How can I make it so that I can only search for Tricolor channels? How to set up TV via the CAM module (I want to watch UHD Tricolor)?
SOLUTION:
Menu - channels - channel search - auto search - satellite - select a satellite operator or satellite - then - check all three boxes - execute.
For UHD, try this frequency 12169 R 24000. Menu - channels - channel search - TR editor - select your satellite - frequencies appear in the right top corner Next to the basket, click + and enter frequencies. Frequency 12169 polarization right speed 24000.
The module stops seeing the map and this message appears on the screen.
Place a relatively thin payment card or something like that under the card. And the result will not be long in coming, the card will work in the module.
OR, glue a couple of layers of paper tape or electrical tape the size of contact pad card and exactly opposite it on the back side...
OR, the reason is the stickers on both sides of the card. After checking the functionality of the module and card, I recommend carefully removing these stickers and the operation of the kit will be more reliable...
So if something similar happens to you, don’t rush to get upset, but try the old grandfather’s option.
But enough about the problems, there are few of them and a rather rare problem. I will add that the basic receivers for Tricolor TV have rather modest characteristics, relatively few capabilities and a very high cost.
Often, alternative receivers (in the article above) bypass them in all respects. In addition, it is especially beneficial to use the tricolor CI+ module itself in new TVs with a built-in satellite tuner.
Moreover, if you have a 4K TV, you can watch the TV channel Tricolor Ultra HD which is completely dedicated to cinema.
On the screen you will see many films in super-definition format! Also, the INSIGHT UHD channel will immerse you in the exciting world of entertainment and documentaries.
Standard equipment:CI+ module DRE Crypt MPEG-4 HD, and of course a smart card
— Integrated Plug and Play conditional access system
- Compatible with DVB standard Common Interface (CI+ 1.3)
— 5V power supply from DVB-CI/CI+ host
— Power consumption no more than 0.5 W
— Size: 100 x 59 x 5 mm
— Weight: 46 g
Good luck, Friends!
class="eliadunit">
If your TV supports CAM modules, then you can watch paid satellite TV on it, such as Tricolor TV, NTV Plus, TELEKARTA, Rainbow TV, etc. You just need to purchase a smart card from the operator you need , module for this card, and insert the card with the module into the CI slot of the TV.
When choosing such a TV, the main thing is not to confuse it with DVB-T2, even if you tell the seller that you want a TV with a built-in receiver, he may sell you DVB-T2 instead of DVB-S2, and these are completely different things. Usually, by the model name you can read what type of receiver is installed on the TV. For example, at LG the letter “S” in the model name “47LM580S-ZA” indicates that the TV has a built-in DVB-S/S2 receiver.
The surest way to determine if your TV has a satellite receiver is to look back where all the connectors are located and find antenna input"LNB IN".
All such TVs have a “CI” slot for “CAM” modules. The “CAM” module is selected depending on the encoding in which the content is encoded, for example, if it is “Tricolor TV”, then the “DRECrypt” module is needed, preferably the latest version. There are no problems with the module; it can easily be purchased at a special store.
Brief instructions for setting up the CAM module "Tricolor TV" or "NTV PLUS" on LG TVs.
1. Install the Tricolor TV smart access card into the Tricolor TV conditional access module (CAM WEST CI+). Chip to the thick side of the module.
2. Install the conditional access module into the switched off TV.
3. Turn on the TV and look at the information about the module and access card; if there is no information or error code 17, check the installation is correct and register the equipment on the Tricolor website.
4. In the TV menu, in the settings, select the antenna type " satellite" In the settings of the Tricolor satellite dish converter, specify the satellite Eutelsat 36A/36B. Converter type single. Converter power supply (LNB) - on. LNB 10750. Transponder frequency - 12226 MHz or 12111 MHz or 11881 MHz (default settings) bit rate 27500. Let's look at the signal quality.
5. Go to setting up channels and turn it on automatic search(in new generation TVs) transponder frequencies from 11881 to 12418 will be registered automatically. At the same time, it is desirable that the TV be flashed with the latest version of the software, in this case the Tricolor TV CI+ CAM module will work more correctly, all transponders will be up to date, and you will correctly scan the necessary channels.
6. If everything went well and the channels are found, go to the sound settings on the TV and set it in the " Digital TV sound settings" parameter MPEG. This is done so that the sound on the channels does not disappear during viewing. Go to the module settings CI data (CAM) orCI Options > Settings and select the item " Factory reset". Turn off the TV completely.
9. An important feature of LG TVs is the “Automatic channel updates" It must be disabled, otherwise the TV will periodically reset the channel list you have configured.Go to settings"Automatic channel update"and set the parameter:off.Now you can fully enjoy the capabilities of your TV while watching channels high definition. Enjoy watching and bright emotions!
NOTE:
Problems with sound or incorrect switching of Tricolor TV channels on the CAM module were fixed in an update to the CAM module in December 2014.
For self-updating By CAM module on the TV, find the service channel for updating by - " Telemaster."Usually it goes under the number333 according to operator's list. If it is not in the list, scan the channels again.
After you switch to it, you can update the CAM of the Tricolor TV module through the TV menu CI data (CAM) or CI Options > Settings > Boot software>OK. If new software is available and you are prompted to update, click the button OK On the remote control, the software update percentage will then appear. You must wait until the module software is completely downloaded from the satellite and after the update is complete, reset the module to factory settings: CI data (CAM) orCI Options > Settings > Factory Reset > OK
After the update, everything works correctly, no glitches are observed, all channels are always in place and with sound. CHECKED!
Also on the menu CI data (CAM) orCI Settings > Information > Smart Card > Providers > Tricolor TV You can view information about packages and their expiration dates.
Explanation of subscription classes:
Also on the menu CI data (CAM) orCI Settings > Information > Smart Card > General Information you can find out ID numberTricolor TV smart cards for renewing and connecting various TV channel packages.
If, after changing the frequencies by the Tricolor TV operator, the channels on your TV are not scanned, or the number of channels after scanning is less than 100, do the following: (Thanks to the user Dim)
The problem was the same as everyone else's. 70 channels, random numbering, etc. and so on.
CAM Module software - current, TV software (let's say LG MT24) - latest version. After the software update, nothing has changed.
Reset the TV to factory settings. In the settings of the satellite antenna and channels, set Satellite for Tricolor and NTV+ - "Eutelsat 36b" or "Express-AMU1" or "Express-AT1" in position 36°E.
In the settings you can also independently create a new satellite with the necessary parameters:
Converter Type: Single/Single
LNB Power (ON)
It is enough to add one Transponder/Frequency Tricolor TV: 12111 MHz or 11881 MHz Horizontal 27500
The most basic thing is to select from the list of transponders one of the Tricolor TV transponders 12111 MHz or 11881 MHz Polarization-H (Horizontal) Flow rate 27500.
Then select Manual search, select the home transponder for Tricolor (12111 or 11881) and be sure to check the Network search / NIT checkbox. Click update and wait for a while. All channels must be registered in normal numbering. All the best.