Creating an iso disk image on a flash drive. How to burn an ISO image to a flash drive
Modern laptop computers are increasingly not equipped with a drive for reading CDs. The absence of a disk drive can be observed especially often on netbooks and ultrabooks. On the one hand, the absence of a disk drive allows you to laptop much lighter and thinner, but on the other hand, this creates a number of inconveniences when operating such a device. For example, to install an operating system, the user will need to create it themselves. In this article we will tell you step by step how to write an operating system image to a flash drive via UltraISO, thus creating bootable USB flash drive.
Step No. 1. Load the image into the UltraISO program.
In order to write an image to a flash drive via , this image must first be loaded into the program. To do this, launch UltraISO and open the “File” menu. Here you need to select “Open”, and then select your ISO file. You can also simply press the key combination Ctrl+O.
Next, a standard window for opening files will appear. Using this window you need to select . UltraISO supports everything possible formats disk images, so you don’t have to worry about your image not opening.
After you have selected the one you need through the “File - Open” menu, files from the UltraISO program will appear in the this image disk.
There is no need to do anything with files that were loaded from the disk image. Otherwise, you will damage the boot image and the bootable USB flash drive you created will not work.
Step No. 2. Connect the USB flash drive and start recording the disk image.
After connecting the flash drive, return to the UltraISO program and open the “Boot” menu. Here you need to select “Record” image of Hard disk."
After this, the disc burning window should open. In this window, you need to select the flash drive on which you want to burn the disk image and click on the “Burn” button.
Step No. 3. Wait until the end of writing the image to the flash drive.
That's it, now all we have to do is wait until UltraISO program writes the disk image to a flash drive. The recording process may take several minutes.
Once recording is complete, you will receive a bootable USB flash drive. In order to install an operating system using it, you will need to enter the BIOS and enable booting from flash drives there.
Hello dear readers or first time guests, today we will talk about how to burn an image to a flash drive, namely ISO and IMG formats using portable programs . Which will do everything for you, you just need to choose the image itself!
How to easily burn an image to a flash drive
First we will talk about the popular ISO image, which is now used almost everywhere, especially its popularity on the Internet. To do this, download the program:
The program is free and portable, i.e. does not require installation, which is very convenient. You can tolerate it and it is from which very often. We launch it and see this window: 
If you want to burn the image to a blank flash drive, then .
Now I’ll explain how to write:
1. Select that this is a disk image, i.e. our flash drive.
2 Select the image itself.
3. We indicate what it is not hard drive and flash drive.
4. You may have another flash drive inserted, so we’ll find out which one it is.
5. Click OK and after a while the recording will be completed successfully.
This best program to write an image to a flash drive, which I found.
Once completed, a reboot is not necessary. Press exit. During the recording process, the program may offer to overwrite the file. Click yes.
How to burn an IMG image to a USB flash drive
Open it and see a simple interface:
1. Select an image (There should be no Russian characters in the path, otherwise the program may swear).
2. Select the device (Before recording, it is advisable to format the device where you are going to record the image).
3. Click White and the image will be recorded.
Now all that remains is to store these programs and do writing an image to a flash drive, or a link to my site, and you shouldn’t have such a problem.
Greetings to all readers. It's about recording ISO image on USB flash drive , not just recording, but also loading from a USB drive with the function BOOT. Because just unpack ISO image and copying to a flash drive is easy. All you need is a program WinRAR, because ISO image partially considered archive file. Well, the most main question- why on USB drive? The answer to this question is very simple - a USB drive does not scratch like a disk, lasts longer with constant use of the device, capacity in a small pocket and other little things.
Method one:
In this method, the most important thing is that ISO image there must be a file bootmgr(without any extension). To do this, just open ISO image any archiver (for example WinRAR). For this we use context menu right click mouse (if there is no file association to this extension) and select nm item " To open with" Further " Select another application", or choose from existing list or by clicking the " Review" (alternative - More app > Find another app on this PC, everything depends on Windows OS) and selecting the path to the software (in our case WinRAR) press the button " Open"(see Windows 10 pictures).
 |
 |
 |
 |
 |
We see that such a file exists.
Download the simplest recording utility ISO image to a USB drive and open it. In the window that opens, click the button " Yes" and selecting ISO image and press " Open"
Don't forget to insert the USB drive into the appropriate slot and press the " Installation". After which formatting will begin in a certain format, and then copying of files to the USB drive will begin.
After completion, the utility will not inform you about this, but will simply close the process of copying files, and the utility will remain open. Press the button " QemuTester"and we see that our flash drive is working.
Method two:
This method must also contain the file bootmgr V ISO image, without it, as we understand, the BOOT function will not work. Open the program, select from the menu File > Open... and choosing our ISO file press " Open".
In the first upper part we have files and folders with the name of the image. Go to the Boot menu > Burn Hard Disk Image...
In the window that appears, select our flash drive, set the recording method USB-HDD+ and press the button " Write down"
We are warned that all data on USB storage device will be erased, so if there is important information copy it to your computer and agree with the appropriate button.
The recording process is not that fast, so you can calmly drink tea.
The recording is complete, the flash drive is ready. Unfortunately, UltraISO does not have testing like the utility in the first method, so to check it we will need to restart the computer or use the USBboot Installer++ utility.
Method three:
In this method we will use the utility and will not look to see if the file exists bootmgr V ISO image.
Download (pictures may differ depending on the version).
We unpack the archive to a place convenient for you.
We go to the unpacked folder and launch it, depending on the bit depth of the OS, and in the window that opens, select our flash drive and click .
Check the boxes as shown in the figure and click " Prepare disk".
After which it will open command line and the preparation of your flash drive will begin, after completion the command line will close itself.
In the same window, click " Install Grub4DOS".
A window will appear with installation information install grub4dostoMBR.
We agree with the " YES".
The bootable USB flash drive is almost ready. Now let's copy our ISO file to the root of the flash drive and create Text Document(with any name for now), open it and paste the following text
title Start WXPOEM RU
map --unmap=0:0xff
map --unhook
root(hd0,0)
map /WXPOEM_RU.iso (0xff)
map --hook
root (0xff)
configfile /grub4dos.lst || chainloader (0xff)
map --unmap=0:0xff
Where you just need to know" title Start WXPOEM RU" is the name of the downloaded image (shown in boot menu, title do not wash). " map /WXPOEM_RU.iso (0xff)" way to ISO image, i.e. you just need to change the name ISO file.
Now we rename the text document with the name menu and change the extension txt on lst, it should work menu.lst.
Return to , check the box Test in QEMU and press the button GO.
Testing our bootable USB flash drive. A window will appear with a test download and with only one inscription " Start WXPOEM RU"
Click " Enter"As we see, everything worked out.
