Smartscreen does not allow you to download a Windows 10 file. Disabling SmartScreen in the Edge browser

All tips

In operating systems from Microsoft, starting with Windows 8, there is such a technology that, in theory, should protect us from malicious software, but in practice the malware passes - but this same SmartScreen can significantly add problems to us. In such cases, a natural question arises: how to disable SmartScreen in Windows 10? In this note we will look at four proven methods that will save you from this occasions.

If you look into this issue, you will find out that SmartScreen is new technology from Microsoft, which scans downloaded information from the Internet, and if there is the slightest doubt about its origin, it blocks it. On the one hand, the service is useful, but the quantity false positives It’s just off the charts and I don’t see much practical sense in it (especially if you use a high-quality commercial antivirus). Just look at the annoying message that the service is temporarily unavailable - if you don’t have an Internet connection, Windows cannot check the program and constantly notifies you about this, which is incredible infuriates.

How to disable SmartScreen via Control Panel in Windows 10

The simplest, and probably familiar to everyone, option is to disable the SmartScreen filter using the “Control Panel”. To get there, in Windows 10 you need to click the “Start” button and select the item you are looking for there. (The easiest way is to start typing what interests you, in which case it will appear in the search results - be sure to try it, it’s incredibly convenient)

In Control Panel, select System and Security. Please note if you have appearance differs from the picture below and you cannot find the item you need - check that the “Category” option is selected in the “View” line

... and we get to the treasured item “Changing parameters Windows SmartScreen"(how far they hid him, probably so that we would suffer and not be able to find him)

Here we have a small choice (previously, by the way, there were three options, but now it either works or it doesn’t - there’s no third option)

The window tells us that the SmartScreen filter protects us and says, choose from two options which is more suitable for you.

Warning before executing an unidentified application is going to bug us at the first opportunity
Do nothing (disable Windows SmartScreen) - this will allow us to work normally and calmly launch any applications without a paranoid mood (but if you download a program of unknown origin and you do not have an antivirus, then no offense)

Most likely, this method will be quite enough for you - as you can see, all problems can be solved with a few mouse clicks.

Disable SmartScreen through group policies

I warn you right away that this method possible to use only in professional Windows edition 10 , at home and for one language, this option is not applicable. To disable the filter, we need to open the “Local Editor” group policy", this is done by calling the "Run" window (combination Windows keys+R) and then entering the command gpedit.msc

On the left side of the Local Group Policy Editor, find the “Explorer” item (it is located in “Computer Configuration” - “Administrative Templates” - “ Windows components"), but in the adjacent, right part of the window, find the item “Configure Windows SmartScreen”

At first glance, everything is simple here, but this is only after a quick inspection - carefully read the certificate, which I see no reason to publish. If you select the “Disabled” item, we do not disable SmartScreen , but we give you the opportunity to do this through the control panel. You need to select the Enabled option and check the Disable SmartScreen feature. Click “OK” and enjoy life.

Again, please note that this method only works on Windows 10 Professional, on home version you will not be able to open the Local Group Policy Editor. Of course, this feature can be added, but without modifying the OS it is impossible.

Disabling SmartScreen for Windows 10 Store Apps

Starting with Windows 8, Microsoft added an app store. So, you can disable SmartScreen specifically for applications from the Store, without disabling it completely. I don’t know who might find this useful, but if there is such a possibility, it should be considered.

Open the Start menu, go to Settings - Privacy. On the left side, select the “General” option and move the slider to the “Off” position on the right side in the line that is responsible for the SmartScreen filter

There is another way that the editor uses Windows registry, but I doubt its convenience and see no point in talking about it in detail - let’s not create unnecessary problems for ourselves.

Disabling SmartScreen for the Microsoft Edge browser

If you, despite numerous reviews, prefer to use latest browser from Microsoft - EDGE, then the SmartScreen filter can be disabled specifically for it. To do this, go to “Options” in the program menu.

Scroll to the very bottom and look for “Show Extra options", scroll again to the very bottom and find the item we need: “Help protect your computer from malicious sites and downloads using the SmartScreen filter.” We move the slider to the “Off” position and that’s it quest The search for where to turn off the filter can be considered completed.

Well, we figured out how to disable SmartScreen in Windows 10. No matter how raw it was not, but if possible, if you are not an advanced user, do not disable it. You should ignore it if you are sure of those programs and applications that the SmartScreen filter does not allow you to run. In my practice, the filter creates huge problems when installing programs that have not been updated for a long time and have long been forgotten by the developers... do not forget that even in the absence of an Internet connection (and in Russia this is not so uncommon) SmartScreen filter constantly tries to check applications and writes a server connection error, which can be very annoying.

The SmartScreen function is a special algorithm to protect your computer from malicious code. Before launching applications, this tool checks it using built-in algorithms and, if unsuccessful, simply blocks the program from starting. Applications that do not have a signature are especially often blocked.

Of course, to run untrusted programs on the system that have not passed verification, it is better to disable filtering altogether so as not to encounter constant blocking. Since the defender has been integrated into the system since Windows 8, it should be disabled at the same level - using special sections of the system.

It is important to understand that when turning off this system protection, you yourself reduce the system’s likelihood of resisting viruses. This makes the computer more vulnerable. Better consider alternative options software installations, for example: you can probably find an original program or there is a similar one in functionality that does not require disabling filtering.

Also, if you have installed third party antivirus, which performs the same task, then you can and even should disable native filtering so that there are no application conflicts.

We will look at how to disable the SmartScreen filter in Windows 10 at different levels: browser, application scan and system protection, in more detail below.

Disable SmartScreen via Control Panel

You can deactivate such a function using 2 options: from the control panel or in the policy editor. Both methods are easy to use and only require strict adherence to the instructions.

To deactivate SmartScreen using the Control Panel you need:

Click on Start and “Control Panel”;
Find the "Security and Maintenance" tile;

On the left side of the window you will see “Change Windows settings SmartScreen";
When you call up the “What do you want to do...” window, you should check the box next to the last item, “Do nothing.”

By completing these steps, you take away the authority from SmartScreen and full responsibility for the health of the system passes to you.

There are some situations in which these filter settings items are not active; they are highlighted gray and their position cannot be changed. This problem is resolved with:

Win + R and regedit;
Go to the path HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\System;
The "EnableSmartScreen" setting must be removed.

An alternative method is through group policies

Another option that achieves the same goal is to disable SmartScreen using Group Policy. It is worth mentioning that the method works for Windows 10 professional and corporate. The home version does not provide users with this option.

Press Win + R and paste gpedit.msc;
Now in the “Computer Configuration” column, select “Administrative Templates”;
From the list, select “Windows Components”;
Now find "Explorer";
Among the options on the right edge will be “Customize Windows SmartScreen”;

Set the parameter to “Enabled” and at the bottom of the window “Disable SmartScreen”.

Both methods help to achieve the same result only using different methods.

In fact, we did not completely disable filtering on the computer, but only when launching applications. Still remains active work SmartScreen in checking application connections and in the Edge browser.

Disable URL checking

Program installation or update functions may not work completely or may produce errors when filtering in this way. Since if SmartScreen detects a source as not benign, it will be blocked and the application will lose access to the network; this is vital for some programs. This algorithm filtering can also be disabled:

Win + I and go to “Privacy”;
Among the options in the “General” tab is “Enable SmartScreen filter...”;
Set the slider to Off.

This will limit SmartScreen's impact to the browser, where it will still help Microsoft Edge with functionality and security. If this does not suit you, you can also disable this functionality.

Disable SmartScreen in the Edge browser

The necessary actions to disable it must be performed in the browser itself.

LMB on the Microsoft Edge menu button (upper right corner);
Now at the end of the list, click on “Advanced options”;
After that, scroll further, at the very end “Helps protect your computer...” set the value to “Off.”

After disabling SmartScreen at all levels, it becomes completely inactive and you will no longer receive unpleasant messages about blocked applications and their connections.

The speed of completing tasks increases significantly when filtering is turned off, but this is all at the expense of privacy. Based on your preferences, you can set your security level.

If you still have questions on the topic “How to disable SmartScreen in Windows 10?”, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

Constant messages from the SmartScreen filter in the Edge browser bother me or Internet Explorer? There is a simple, proven way to bypass these messages.

SmartScreen is a tool of its own that aims to provide additional protection for the browser. It works in both Internet Explorer and the new Edge. The tool is very useful if you want to improve the security level of your computer. Unfortunately, it has its drawbacks - intrusive messages on how to activate the service in the browser.

Let's look at how to bypass SmartScreen messages. You should not completely disable the SmartScreen filter, as it is very useful and protects your browser from threats from the Internet. Most likely, you need to try to minimize the appearance of intrusive messages from SmartScreen

How to remove messages in browsers

Let's start by introducing changes to Windows settings 10 using the Local Group Policy Editor. You can find it using the built-in search engine Windows 10. You can also open the Editor through the Run window (Windows + R) by typing the command gpedit.msc in it.

In the left pane of the Local Group Policy Editor window that opens, go to the following path:

"Computer Configuration > Administrative Templates > Windows Components > Internet Explorer"

— In the case of Internet Explorer

Computer Configuration > Administrative Templates > Windows Components > Microsoft Edge

— In the case of Microsoft Edge.

In both cases, after going to the browser folder, in the main part of the window, look for the item “Do not allow SmartScreen filter messages to be displayed.” If you want to disable messages completely, use the option “Do not allow SmartScreen filter messages to appear when there are unverified files.”

After selecting the desired item, double-click on it. A window will open with options for the specific command. Here you need to change the value from “Not installed” to “Enabled” and save the changes by clicking on the “Apply” and “OK” buttons. Then exit the Local Group Policy Editor window.

There is no need to restart your computer, but if Microsoft Edge or Internet Explorer was open, you will need to close it and reopen it. The changes will take effect immediately after you restart the browser. The filter message boxes will disappear from the screen. However, SmartScreen will work all the time, but only in background without informing us about it.

How to completely disable the SmartScreen filter

You can also use the Local Group Policy Editor to disable SmartScreen completely. This feature is available for both browsers via the above path.

In both cases - regardless of which browser we use, Edge or IE - find the “Turn off SmartScreen filter” item in the list. As in the previous case, double-click on this item, select the “Enabled” option and save the changes. Then restart your browser. The filter will now be completely turned off.

The same can be done in the browser itself. Let's start with Internet Explorer. Open IE and go to the Tools menu item. Then select Internet Options.

After opening the IE settings window, go to the Security tab and select "Other". The “Security Settings - Internet Zone” window will open. In the list that opens, find the item “Use SmartScreen filter” and set the value to “Disable”. Then save the settings and exit the browser. After restarting IE, the filter will no longer be active.

In Microsoft Edge, right-click top corner button with three dots, and then go to Settings. In the window that opens, scroll down and click on “Show additional settings" After opening another side screen move down, and then turn off the slider on the entry “Protect me from malicious sites and downloaded files with the SmartScreen filter.” Once Edge restarts, the filter will be disabled.

Disabling a filter in Windows 8.1 or 10

How often does this happen after reinstallation? Windows systems 8.1 or 10 – over the next days the user gradually installs all programs. Unfortunately, most of the time, a message appears on the screen that the downloaded application may be dangerous for your computer.

There seems to be nothing wrong with this, if not for the fact that SmartScreen connects to the Internet to verify the authenticity of applications and thus takes up a lot of the user’s time. Result? In the screen that opens, in which you can force start, you still have to wait several tens of seconds. To avoid this, you can disable the SmartScreen filter.

Go to Control Panel and then open System and Security > Action Center.

From the side menu, select Change Settings Windows filter SmartScreen". Another window will appear in which you need to mark the options you need.

Select the last option “Do nothing (turn off Windows SmartScreen). Now the filter is disabled and a cloud will be displayed in the notification area with information that SmartScreen is not working.
.

Silence messages from a disabled SmartScreen

If turning off the filter means it won't monitor running applications, then Windows will constantly notify us about it, and for the safety of the computer we must enable it.

The SmartScreen filter in Windows 10 is nothing more than a kind of system protector that blocks potential startup unwanted programs and services. This function works at the level itself operating system, and therefore disabling it causes a number of difficulties for Windows users 10.

How to disable SmartScreen through Control Panel?

If you need to run a program or application that is blocking SmartScreen, this method designed just for you. Disabling the filter through the Control Panel allows you to open any software. To do this, click “Start” and select “Control Panel”. Next, click on the section “System and Security”, “Security and Maintenance”. In the left menu, select “Change Windows SmartScreen settings.”

In the new window, check the box next to “Do nothing (disable Windows SmartScreen).”

Afterwards we reboot the PC.

IMPORTANT! If in the editing section SmartScreen settings all items are inactive, you should make changes in the registry editor. Press “Win+R” and enter “regedit”.

We go along the branch: “HKEY_LOCAL_MACHINE”, “Software”, “Policies”, “Microsoft”, “Windows”, “System”. In this folder you need to find and delete the “EnableSmartScreen” parameter and restart the PC.

Using Group Policy Editor to disable a filter

To get to the Group Policy Editor, press “Win + R” and enter “gpedit.msc”. Go to the “Computer Configuration” section, then “Administrative Templates”, “Windows Components”. Select the “Explorer” folder and the “Customize Windows SmartScreen” function and change the value to “Disabled”.

After completing the operation, reboot the PC.

Windows 10 Store and SmartScreen

Windows Store 10 is closely related to the SmartScreen filter, since this service checks the addresses of all applications downloaded from this resource. Therefore, SmartScreen can block the operation of the program or game you need. To disable the app store filter, follow these steps:

Go to the “General” section. In the item regarding SmartScreen, check the “Disable” box.

To enable the filter, you need to follow all the same steps, just set the value to “Enabled”.

Many owners of the latest to date Windows versions I'm interested in how to disable SmartScreen in Windows 10.

And all because this filter built into the system does not allow you to run or even install programs that, in its opinion, may be dangerous.

And everything would be fine - all sorts virus programs they won’t get through, but often it blocks completely safe utilities and applications.

There are generally self-written programs made by novice programmers or full-fledged programs without Windows licenses(there just wasn’t enough money, an example of this is PPJoy Joystick Driver, unique program, which allows you to play games on two keyboards).

So, with SmartScreen enabled, you don’t even have to try to launch them. So we will now look at everything possible ways in order to disable this very SmartScreen.

Via "Control Panel"

To disable SmartScreen in Windows 10 through the Control Panel, you need to open this very panel.

There are two ways to do this - find it in open menu“Start” or by pressing the key combination Win + X.

As for the first method, there is one problem - the configuration of this menu is different for everyone and often finding the “Control Panel” there can be very problematic.

Therefore, it is best to use the second method.

Press the Win and X buttons on the keyboard, after which the menu shown in Figure 1 opens. There you need to select the appropriate item, highlighted with arrows in the same figure.

After this, the “Control Panel” launches. There you should select the “Security and Maintenance” item. Figure No. 2 shows the same “Control Panel”, only on English language.

In the Russian system, the appearance of the icons is no different and the “Security and Maintenance” menu will look like exactly the same blue flag as shown in the figure.

Please note that the folder type should be “Large Icons”.

You can select this from the “View” menu, which is highlighted with a red frame in the same figure.

If you select the “Categories” view, you will need to go first to the “System and Security” menu, and then to “Security and Maintenance”.

After this, in the menu on the left side you will need to select the item “Change Windows SmartScreen settings”, which is highlighted in Figure 3 with a red frame.

There is only one of them there and it will be very difficult to confuse them.

In the window that opens, select “Do nothing...” and click OK. After this, you won't need to restart your computer or do anything else.

The filter for “wrong” applications will simply stop working. It is done!

By the way, you may also be interested in these articles:

Why Windows 10 won't start: Effective solutions

Through the Local Group Policy Editor

Clue: This method will not work for the versionWindows 10“Home”, because this same local group policy editor is simply not there. Other versions have such a component, and it is very convenient to use.

So, to launch the Local Group Policy Editor, the easiest way is to press the Win + R key combination on your keyboard and enter the gpedit.msc command into the launch window, and then click OK.

It all looks as shown in Figure 5.

After that, in the menu highlighted in Figure No. 6 green, you need to sequentially go to the following folders: “Computer Configuration”, then “Administrative Templates”, then “Windows Components” and “File Explorer”.

Now we are in the SmartScreen settings window. In the settings parameters, select the “Enabled” item (highlighted with a red frame in Figure No. 7).

After this, in the selection window, which is highlighted with a green frame, you should select the “Disable SmartScreen” option.

This is done very simply - you just need to click below the inscription “Choose one of following parameters", after which a drop-down list will appear, in which the item we need will be.

After this, all that remains is to click OK. You can use it!