How long to charge the new iPhone 5s. Correctly charging iPhone, iPad, MacBook batteries

All tips

There are no universal recommendations on how to properly charge an iPhone. Manufacturer of mobile gadgets Apple company in the instructions for the devices, she provided a few tips that should be followed so that the iPhone lasts as long as possible.

When buying a gadget from Apple, the user hopes that the smartphone will serve him for at least 3-5 years, because the prices for new products from this company are quite high. And one of the first questions when purchasing is how to properly charge an iPhone so that the battery lasts as long as possible.

Let us immediately note that a properly operated battery can extend the life of the gadget by months, or even years. However, a lot also depends on the battery power specific version iPhone.

Today, the most common Apple smartphone models are the following versions: iPhone 5s, iPhone 6 and iPhone 6 Plus. Gadgets more earlier versions– 4 and 4s are considered somewhat outdated. Models such as the seventh iPhone are still new.

The table below shows how many hours the battery of the most popular versions of iPhones holds a charge among users. These are iPhone 5s and 6 Plus. The table shows that each new version gadget battery power increased significantly.

For your mobile devices Apple Corporation offers lithium-ion batteries characterized by:

long period of operation;
fast charging;
high specific capacity;
no memory effect.

Reference. The battery memory effect is a reversible loss of capacity that occurs when charging rules are regularly violated. And the most important rule is that you only need to charge a completely discharged battery.

Most users note that the batteries in iPhones of all versions - 4, 5, 6, 6s, SE and others - are very High Quality. But in order to fully experience the positive properties of the battery on your device, you need to know how to properly charge the battery over time and how best to charge a specific model.

On the Apple website, the manufacturer provides a number of recommendations for charging mobile devices. And he even gives it away separate page. The advice is addressed to users of iPhones of all versions, i.e. they are universal.

1 There is no need to charge the device at temperatures below 40 and above 50 degrees. These are extreme temperatures. The ideal figure is 16-22 degrees Celsius. Above 35, the gadget will overheat, which will significantly reduce the battery life.

Of course, it would never occur to anyone to strictly adhere to the advice regarding temperature conditions. There is no need to literally follow the recommendations presented, constantly holding the thermometer in your hands. It is enough to make sure that the iPhone is not exposed to direct sunlight for a long time, and that it is not charging under the pillow.

2 For charging, you must use only a charger from the manufacturer, i.e. original version. It includes special elements to protect against overheating of the gadget. In addition to the current, 2 more parameters are automatically controlled - voltage and temperature. 3 Under no circumstances should a charged iPhone be allowed to discharge to 0%. The battery life depends on how many times the gadget is completely discharged. And every time the charge level drops to 0%, the battery loses its capacity by 50%. The reason for this is the so-called depth of discharge.

Reference. The depth of discharge is the ratio of the battery's discharge capacity to its nominal capacity.

It turns out that the more times the battery is completely discharged, the faster it fails. As an example, below is a table showing the relationship between the number of battery discharge cycles and the degree of discharge.

We also note that the iPhone battery is charged in 2 stages:

in fast mode (up to 80%);
compensation charging (80-100%).

This approach to battery charging answers the question of how to quickly charge an iPhone and how to extend battery life. Apple itself took care of this by creating a two-stage charging system.

Advice. The best period for recharging an iPhone occurs at the moment when it is discharged to 10%. It is recommended to turn off the device when the charge level reaches 75-80%.

4 You should not charge the gadget to 100%. This advice is probably familiar to many, but not everyone uses it, leaving the iPhone on charge from the evening until the morning.

Overcharging, of course, is less harmful than completely discharging, but you should not neglect this advice from the manufacturer. Regular recharging significantly reduces battery life in autonomous mode.

5 Once a month you should discharge your iPhone to 0%. Complex chemical processes. Leaks in the gadget's battery require a complete discharge every month to increase its service life. But only once a month - not more often.

Putting the above tips into practice can keep your iPhone battery performing well for at least 2 years. However, all users use their phone differently. Some treat equipment with care, others do not think about its safety, handling it haphazardly. But even if you don’t use your iPhone and leave it in the box, sooner or later the battery will still fail. In any case, a bad battery can be replaced.

As for not the latest iPhone models - 4, 5 and others, most users have learned the basic rules of charging. But new gadget– versions 7 and higher, still causes problems among owners and potential buyers a long list of questions.

Today, none of the active consumers of Apple products think about how to charge iPhone 5, 4 and other not new models. This is done very simply - using a charger connected to a power source.

But with version 7 things are different. Initially, the manufacturer promised that charging would be wireless in this version. However, this promise was not fulfilled. Owners of iPhone 5, like others, are far from latest versions The seven were eagerly awaiting the gadget, hoping that the charging element would be wireless.

What happened in reality? iPhone version 7, like many others - 4.5, 6, is charged via cable. But this can hardly be called a disadvantage, because... specifications The new gadget, as one would expect, has in many ways surpassed its predecessors - model four and others. Thus, the seven can withstand up to 14 hours of talk time and up to 10 hours in WiFi mode without additional charging. In general, the battery power of the iPhone 7 has become more durable by 2 hours compared to the iPhone 6 Plus.

What to do if your iPhone doesn't want to charge

Sometimes users of an Apple gadget have a problem that it does not charge, even though both the phone itself and the charger are working. The latter is plugged into the outlet, but there is no charge. What to do in such a situation?

It is necessary to check the condition of the Lightning connector, because... Over time, dust and dirt can get into it. This problem may disrupt contact and the iPhone will not charge, because... in this case, the connections between him and charger will not be. You can clean the connector from fine dust and debris using a regular toothpick. If after this the problem is not resolved, most likely the charger has failed or there are more serious problems. And you need to contact the service center.

The battery is the heart of a smartphone. Without its proper operation, you will not get everything you would like from the device. Of course, if your iPhone battery drains quickly, you can buy one and not worry about it. But fast discharge is only the first sign that an Apple device will soon need to be carried in. How to distinguish this and what to do if your smartphone battery does not work? The question of how to replace an iPhone battery also often arises. It is important to figure out in time whether this is possible.

Why do smartphone batteries deteriorate over time?

Unfortunately, the battery is practically the only “hard” part of the gadget that is subject to physical aging. Over time, it will begin to lose capacity, causing the charge to be consumed much faster. Even lithium-ion and lithium polymer batteries, which do not have the “memory effect” that spoiled the nickel-cadmium batteries installed on older models.

Capacity loss occurs after a certain number of charge-discharge cycles. In the process, the battery loses its capacity. It will charge faster, but it will also consume energy too quickly. Manufacturers specifically expect that the battery will last no more than 1000 full charge cycles without loss of capacity. After which it begins to decline quite quickly.

How to charge your iPhone without damaging the battery

To properly charge your device, you need to remember some rules. Such an elementary action also requires a competent approach. Otherwise, there is a chance that the battery will soon say goodbye to a good third of its capacity, and you will say goodbye to several hours of device operation.

General charging rules

It is necessary to remember some nuances and features when using, which every smartphone owner should definitely know. Compliance with them will keep the battery in perfect order.

You can't discharge your iPhone to 0%. A full charge-discharge cycle will shorten the life of the device. It is much more profitable to charge it after it reaches the 30% mark. In this case, the battery will suffer less. For example, when discharged to 100%, the battery will “live” only 500 discharge cycles. If you constantly charge it, as soon as the energy mark reaches 50%, the number of cycles will increase to 1500.
Do not use the device while charging. Not only will energy accumulate more slowly, but there is a risk that the battery will be damaged. In addition, then the gadget will overheat, which is not good for both the battery and other electronic components.
It is necessary to use only high-quality USB cables and special ones for them. A low-quality wire may not only not fit, but its characteristics will not match the gadget: it can damage the charge controller. And replacing the latter is a big problem.
Do not store the battery in a discharged or fully charged state. Don't use an iPhone? Charge it to 50% and leave it sitting. In this case, its battery will be preserved much better.
It is recommended to completely discharge the battery once a month until the smartphone turns off on its own. This will allow you to calibrate its capacity due to the presence of a minimal “memory effect”.

At the same time, it’s worth dispelling a few myths that swarm around old memory around modern batteries for phones and tablets. They're not just useless today. These myths to some extent harm the device and its owners.

You should not leave your smartphone on charge for a long time. Incorrect - modern iPhones are equipped with a charge controller. If the battery is full, not a drop of energy will flow into it, the controller will not allow this. Consequently, the “recharge” effect will not occur;
You cannot recharge your smartphone until it is discharged to 0%. This is very bad advice, because in this case the battery will last less. It dates back to the days of nickel-cadmium batteries, which “remembered” the last value of the battery before charging, and then allowed energy to be taken strictly before it.

These two myths are relics of the past, when phones didn't do a fraction of what they can do now. Previously, it was easy to damage the battery by leaving the device on charge overnight, and lose some of the capacity by simply charging the battery with 10-20% energy. Now this is no longer relevant - technology has stepped far forward, so it will allow you not to worry about such trifles.

How to charge a new iPhone battery

Each new battery At first it requires special treatment. It must be calibrated in a certain way so that there are no problems with the duration of its further operation. It is especially important to immediately start calibrating the new battery from the first days of “life” inside the smartphone. Because then correct the situation and restore lost capacity due to incorrect charging will be quite difficult.

Of course, the battery that went on sale with the purchased smartphone, or any other one, “out of the box” has a certain amount of energy. It is advisable to carry out the first charge immediately after purchase, leaving the smartphone to charge for 12 hours. At the same time, you should not turn it on, much less use the iPhone - the charging process should take place in complete peace for the device.

After 12 hours, you need to discharge the battery to self-shutdown gadget. This procedure allows you to calibrate the battery, squeezing all possible capacity out of it. Without it, some part of the battery reserves remained in a “sleeping” state. Therefore, the period that the device could last without recharging would be somewhat reduced.

You can repeat this cycle of complete charging and discharging several times. But you shouldn’t get carried away - one or two calibrations will be enough. Otherwise, the battery will last longer, but its charge-discharge cycles will end faster. That is, it will exhaust its resource and stop holding energy the way it was originally supposed to.

Immediately after this calibration procedure, you can fully use the gadget. At the same time, it is important to remember how to charge your iPhone correctly and what not to do with it. This will allow

Which cable to use to charge iPhone

It is necessary to correctly select all components and consumables for your Apple device. And even if the special glass may not be branded, then it must be, if not Apple-made, then at least certified. Unfortunately, there are a number of reasons for this.

The first is a tricky system iPhone charging. Regular lightning cords will not work for it. In order for energy to begin flowing into the battery, a special chip located in the plug is required. Otherwise, a smartphone running iOS 7 or a newer version will literally swear at an uncertified cable. This identification chip is not installed in cheap Chinese wires that can damage the iPhone. Therefore, you will have to buy more or less high-quality and expensive cords. Such models will comply with the MFi (Made From iPhone/iPad/iPod) license. Apple certifies some companies, receiving a small percentage from them for cable sales. Therefore, you can safely buy the products of such a company.

The second reason is the risk of accidentally burning the iPhone charge controller with a low-quality cable. Even if the product is certified - in the lowest price category there is a chance to accidentally stumble upon a wire that is not equipped with the chip necessary to control the current. Of course, the device itself will cope with the voltage for some time - but constant changes and increased load First they will damage the chip controller and then burn the battery. And a low-quality cord will quickly fray and break. Braided cables, for example, can last a very long time.

Which company cables can you buy for iPhone?

There are several specific companies that are closely involved in the manufacture of special products for the iPhone, including Lightning cables. It is worth paying attention to the models produced by these brands. Because they all meet Apple standards and work flawlessly for many years.

The first company - with its unusual solutions and beautiful appearance products for iPhone. USB cables from this company amaze with their variety. The manufacturer is not limited to standard solutions and colors. You can find literally everything on sale - braided cords, flat ordinary cables and wires of incredible colors. The quality, in turn, is as high as the originality of Remax. The product can work for several years without interruption. This is why we love Remax among many iPhone owners.

Then you can mention . The company does not have as much variety as the previous representative of the Apple accessories market. But on the other hand, you can find quite interesting and convenient solutions for any purpose. For example, a spring cable, which is ideal for. It does not break or break - it is too difficult to damage such a wire.

By purchasing cables from these manufacturers, the buyer will never receive a fake that can damage the iPhone during charging. Because these brands are responsible for quality with their own reputation and MFi license from Apple. Naturally, they don’t want to lose her.

What you need to do to avoid charging your smartphone so often

If you're worried about your iPhone draining quickly, it might not be the case. poor quality charger or “old” battery. There is a chance that the problem lies within a software component.

It is important to understand that all applications and features you use, even if they are running in background, will draw energy from the battery. Therefore, it is necessary to constantly turn them off so that they do not drain the battery. What parameters and applications to pay attention to:

Wi-Fi, Bluetooth, 3G Internet - users often forget to turn off these services after use, and they continue to broadcast a useless signal into space.
Geolocation - it should be turned on only when you need to directly navigate the area or put a mark on virtual map cities. In other cases it is not needed.
Increased screen brightness. Display is the main reason fast discharge battery Most often, the brightness of the screen is increased on a sunny street in order to at least see something. But this problem can be solved by something similar on the display.
“Heavy” applications - Skype, MS Office for smartphones and the like. If any unnecessary applications work in the background - they need to be turned off. And then energy will not be spent on them either.

In addition, it is important to remember to exit any applications when they are finished, even if you still need them. For example, it's worth minimizing the browser to the background if you don't need it right now.

Unfortunately, a number of other reasons can negatively affect the battery. Do not overheat the smartphone battery above 35-40 degrees Celsius. Excessive heating leads to capacity degradation. Hypothermia below −15 degrees Celsius has a similarly unpleasant effect on the battery. Therefore, you should not carry your iPhone in your bag or bag in winter. external pocket. But you can purchase either fabric made in the shape of or - it will warm the gadget, which will allow you to use it outside in winter. And in the summer, you can’t charge it on the windowsill or dashboard of a car.

How to understand when it's time to change the battery

You can diagnose the battery yourself; it is not necessary to contact a service center to make a “diagnosis”. Most devices simply require a good look and a couple of hours of use.

The most striking sign is when the device turns off when there is supposedly some charge left inside the battery. As a rule, the iPhone turns off when the charge is 10-20%. This is a clear example of battery malfunction. In addition, if it loses charge literally in a matter of hours, this is already a sign of damage or aging: no program is capable of draining the battery so quickly. But if the smartphone gets hot, there is a risk that it is faulty. Heating of the battery or processor is an indicator that the iPhone is actively working. That is, there is energy, but it is spent on something extraneous. Perhaps a virus has entered your device. It is worth checking what the reason is with the help of a service center.

The main sign of battery degradation from time or improper handling is too quick loss charge and reduced time required to replenish it. If previously the smartphone’s work was enough for the whole day, but now it suddenly began to “starve” after a few hours - this is a reason to think about it. However, we should not forget that this may also be affected by a large number of applications or high brightness screen.

The next diagnostic option is to examine the battery itself for deformation. Unfortunately, for an iPhone this advice is not simple, because for inspection you will have to disassemble the device’s case. Although, with a sufficiently serious level of wear, it will be possible to determine the deformation “by eye”.

To do this you will need to study back cover if it is made of plastic. It will rise a little and acquire a kind of hump. This is a sign that the battery underneath is swollen. The reason is that over time, the battery begins to release gas as it degrades. And as soon as this process begins, the battery needs to be replaced. Accidental impact or overheating can contribute to a micro-explosion.

If the smartphone is made of metal or glass (like the latest versions of the iPhone), then the battery will not be able to deform the back cover. But it will affect the operation of the touchscreen - the display will be slightly convex and may squeak when pressed. In addition, if the display swells, it will gradually begin to peel off. In especially sad situations, if you press firmly on the screen, streaks will appear. However, this may happen not because of the battery, but after a fall without. In any case, it is worth visiting a service center to find out the cause of the creaking and streaks.

Is it possible to replace the battery on an iPhone yourself?

Apple has a strict policy of never making smartphones with an opening back cover. And they still get it right - the iPhone is very difficult to open to replace the battery. This can only be done by an experienced person who has encountered a similar need before.

Of course, it is possible to replace the battery on an iPhone of any generation. But this will take a little time and enough courage. Unfortunately, there is a high chance of accidentally damaging your smartphone in the process. Therefore, you should entrust opening the gadget and replacing the battery to professionals from the service center. They can make sure your device lives a long and happy life.

How to Replace an iPhone Battery

Different models of Apple smartphones have different principles for opening and removing the battery. In some places it will be more difficult, in others it will be simpler. Naturally, such intervention is associated with certain risks.

But it’s worth remembering that first you always need to stock up on certain tools. Otherwise, you will not be able to open the smartphone. Need to find:

A flat plastic object used to open latches.
A special screwdriver with five blades called a Pentalobe.
Sufficiently powerful suction cup.
A regular Phillips screwdriver.
A long thin object for lifting the battery.
A small soft piece of fabric.

This toolkit is enough to open any device without special problems, albeit with a certain risk of damaging your smartphone. Naturally, you need to buy new battery. Before disassembling the Apple case, be sure to turn off the device.

iPhone 4

First of all, you need to take a five-point screwdriver and unscrew two barely noticeable screws located near the charging connector.

Then carefully move with two fingers back panel iPhone from the charging connector. It will move a few millimeters. After this, you can lift it - just carefully pull the upper edge, which protrudes beyond the body. The device must be placed with the charging connector facing you, screen down.

It is necessary to disconnect the battery cable. It is located closer to the lower left corner of the battery. To do this, you will need to very carefully unscrew the screw and disconnect the silver connector. IMPORTANT! Do not touch the contacts with metal objects! This will provoke short circuit- and then you will definitely have to take the phone to the service center. It is very important not to bend any fasteners during the process. In addition, under the fixing screw of the cable there is also a lock coaxial cable- a small strip that is attached under the train itself. It must be put in place before assembly.

After this, you can begin to remove the battery from the case. And this is where the problems begin. The bottom line is that the battery, in order to avoid “chatter” inside the case, is held on with good glue. And therefore you will have to literally tear it off the body. But to do this, you can warm up the battery with a hairdryer - it will still be damaged and will be thrown away. If you still need the battery, you shouldn’t heat it, you’ll have to tear it off like this.

To remove the battery, you need to pull the plastic tab (not for the train!), and insert some long and strong object into the resulting gap. Preferably plastic. Then, like a crowbar, they need to very carefully lift the battery (do not put pressure on the space under it - there is a risk of damaging the device), simultaneously pulling it out by the plastic tab.

After this, you need to install a new battery - and you can put the smartphone back together. If you haven't had protective cover or film, dust and dirt will certainly accumulate under the lid. It is recommended to remove it before assembly.

iPhone 5

This generation understands differently than the previous one. This time you will need to remove the front panel with the display and touchscreen, and not the back cover. Therefore, there are much more risks during disassembly - there is a possibility of accidentally damaging the screen and camera cable. First of all, you need to unscrew the two screws with a five-point slot near the Lightning connector.

Then take the suction cup and attach it to the display a little higher Home buttons.

You need to lift the display - and in the resulting gap, disconnect the Home button cable, to do this, insert some thin plastic object and very carefully use it to first hook the bracket that covers the plug, and then the cable itself.

And then with the same object you need to very carefully press out the latches that hold the screen in place. After this, you need to EXTREMELY carefully lift the display. It is also supported by trains in the upper part, it is important not to tear them. It is necessary to place the display at a right angle to the body. To the right of the battery, in the very corner of the device, there is a bracket with several screws. They have different lengths - it is important to remember which is which.

The bar must be carefully removed, and then the screen cables located under it must be disconnected using a plastic tool.

Then we find a bracket with screws located below the plastic tab. It must be removed by unscrewing all the screws and then using a plastic tool to remove the battery cable. When assembling, it is important not to mix up the screws - they have different lengths.

Then you need to pry the battery with a plastic tool to remove it from the socket. You can carefully move it around the perimeter several times, disconnecting the battery from the adhesive on the case. Models 5S and older use double-sided tape that will need to be pulled out before removing the battery.

It is important not to damage motherboard. After this, you can safely install the replacement battery and assemble the gadget in reverse order.

The iPhone 6 is disassembled in a similar way - only the position of the screws and cables can change. You will also need to remove the three battery stickers, which are located at the bottom of the device under the battery.

As you can see, it is easier to disassemble a nuclear warhead than an iPhone of any generation, unless you have certain experience and skill. Therefore, we recommend contacting a service center to exclude the possibility of accidental breakdown during the process of replacing the battery. Giving a gadget to the masters means providing it with high-quality repairs without consequences.

iPhone battery failed? Contact Monkeyshop service center

If your Apple smartphone suddenly refuses to charge, or its battery dies after just a few hours of using the gadget, it’s time to change the battery. Of course, you can do this yourself - but there is a huge risk of breaking some important microcircuit or causing a short circuit. In such a delicate matter as iPhone disassembly, it is better to contact a professional master.

And the Monkeyshop service center is ready to provide you with phone repairs and battery replacement. We will find out why your gadget does not hold a charge, and we will definitely fix the reason. If the problem is the battery, replacement will be quick and painless. If it is something else, the reason will be corrected.

Our service center operates in Dnepr (Dnepropetrovsk) - at any time you can come to us and give our specialists a smartphone to treat its illness. In the meantime, we are repairing the device - you will have the opportunity to browse our store of cases and other accessories, choosing a high-quality charger and a USB cable for it. Or perhaps you would be interested in some iPhone case or protective glass for him.

Repair and quality accessories - Monkeyshop will take care of your gadget.

Every iPhone owner asks the question: how to properly charge the device and at the same time ensure long battery life. In this article, we have collected tips and tricks that will help you learn more about this.

Due to improper use of the smartphone, the user may unknowingly shorten the battery life. This happens every day, and in order to correct the situation, it is worth familiarizing yourself with the unspoken rules for extending battery life. Let's consider what negatively affects its work.

Extreme temperatures

Any gadget, be it a phone, tablet or computer, is sensitive to both too low and too low high temperatures. This is justified by the absence of a heating or cooling function for the device in the internal configuration. Consequently, the “filling” of the iPhone may simply freeze or heat up and fail, or in the worst case, catch fire.

the screen was not exposed to direct sunlight;
the smartphone was not in a closed, stuffy or hot room (for example, in a car in the heat);
did not charge in places where there is no ventilation, no access to air, because The device will not cool down.

Rule #1: Do not use or charge your device in extreme temperatures.

Non-original charger

The standard iPhone power adapter has a voltage of 5 volts (V) and a current of 1 amp (A). Together with certified cable The phone charges in an hour and a half. If the equipment turns out to be non-original, both the battery and the phone may suffer.

It's all about the manufacturers - some provide quality products, others may give the user incorrect information about the characteristics, i.e. indicate the standard 5V and 1A, and sell the product with values that will be greater or less than those indicated.

Even with a slight increase in voltage, for example, by 4%, the battery capacity will decrease twice as fast from cycle to cycle. Typically, the differences are regulated by the built-in PCIM controller, which is responsible for supplying current.

Counterfeits may not have such a controller, which can result in high output voltage. This can damage both the charge controller in the iPhone and the battery itself. It is better to protect yourself from problems and use the equipment provided by the manufacturer.

Rule #2: Use the original adapter.

Chinese charging cable

Business with Lightning cables things are more complicated. Many iPhone owners have heard that such cables break easily and are not cheap. Its plug is equipped with a special chip with which the iPhone recognizes its original wire. Finding such an analogue is quite difficult.

However, the Chinese were able to clone this chip, selling similar cables for pennies, which is how they lure users. It is worth assuring that such a product may work, but for a very short time. We recommend using cables that have passed Apple certification - this way you will avoid additional damage to the device.

Rule #3: Buy only certified cables.

Full discharge

Used in smartphone lithium ion battery, and it is very sensitive to the charge dropping to zero. This can cause significant damage, resulting in a reduced service life. This is all due to the depth of discharge - the ratio of the discharged capacity to the nominal one.

For example, if you use up 100% of the charge and do this constantly, the battery in this state can withstand about 500 cycles. If the phone is only half discharged, the number of cycles instantly increases to 1500. It turns out that the more you discharge the battery, the less it will last you.

Rule #4: Don't completely drain your iPhone.

Charge up to 100%

When the device's charge reaches its maximum, the battery is in a high load state. This is due to the fact that each cell of a lithium-ion battery is charged to the required voltage, therefore, the higher the charge, the shorter the lifespan of one battery cell.

Of course, this does not cause as much harm as completely discharging it, but it is better to charge the iPhone in small portions - at every opportunity, even by 10-20%, but often and painlessly. The optimal charge level is considered to be 40-80%, so you can charge the phone starting from 50% and ending with no more than 90%.

Rule #5: Charge your device more often.

No battery calibration

When using the phone for a long time, the charge indicator inevitably goes down. This is due to improper use, frequent discharge, incorrect operation of the smartphone itself (sudden shutdowns, damage internal components, etc.), or charging the battery at random. A complete discharge is appropriate if the iPhone displays an incorrect charge indicator. Then it’s worth bringing the phone first to 100%, and then to zero, or vice versa.

This process is called "calibration". Sometimes you have to do it in order to bring the battery back to life. For prevention, it is best to do this procedure no more than once a month.

Rule #6: Periodically discharge your iPhone.

Is it possible to leave an iPhone on charge all night?

Many people are debating whether it is safe to charge an Apple smartphone overnight. Therefore, we conducted our own investigation. In fact, long-term charging at a constant value of 100% does not cause much harm to the battery. When your iPhone is fully charged and connected to a charger, it runs on AC power. At this time, the smartphone is not charging or discharging, and the battery is in a “feeding” state.

If the charge drops by 2% during overnight charging, current begins to flow through the cable. This does not cause much harm to the battery, because this happens infrequently - about once a week. In other cases, the current is kept at a stable level, therefore, the device does not “fry” at night.

Is it possible to charge an iPhone using an iPad charger?

It’s worth answering right away: yes, you can. This is possible thanks to the built-in iPhone special branded charge controller. With it, the charging speed is deliberately reduced after 80% in order to control the optimal current supply. He is also responsible for “working from the network” and constantly monitors the health of the battery. For this reason, when charging from an adapter iPad battery does not load, despite the fact that it has a voltage of 5 volts and a current of 2.1 amperes.

Total power iPad charging is twice as much as the iPhone adapter. It is logical to assume that in this case the smartphone will charge faster, but this is not true. In older iPhones, regardless of the current supply level, the built-in controller does not allow you to receive more charge than what is written in it. In new models, starting from the sixth generation, the manufacturer was able to speed up the process a little, but only slightly.

Long term storage

During long-term storage, the device may wear out considerably - some functions will become worse, the battery will lose its capacity, etc. To prevent this from happening, you must follow the following recommendations:

Charge your iPhone up to 50%;
turn off the device completely;
store in a dry place where the temperature does not reach +32 degrees;
Bring your iPhone's charge to 50% every six months.

The device should be charged with half the battery capacity, because full charge can significantly reduce service life. The same applies to his absence. At 100% the primary capacity is lost, at 0% the phone goes into deep relaxation, and this harms the battery.

The company has prepared relevant recommendations especially for its customers, which are especially worth listening to:

You should not charge your iPhone together with the case, because... this may cause the phone to heat up;
the same can be said about using a smartphone in cold weather;
should only be used certified accessories marked MFI (Made for iPhone) on the supplied box or on the product itself;
Before long-term storage, charge the phone halfway and turn it off.

It is worth noting that Apple only recommends, and does not tell users how to handle the company’s devices. According to iPhone owners, it is not necessary to strictly follow all the rules for battery use. The manufacturer has created special built-in controllers so that the owner does not damage the battery through his actions. However, the tips described above will somehow help extend its life for many years.

Video instruction

You can see detailed video instructions about how to properly charge your iPhone. The created video will help users better understand the implementation of all the provided actions.

Results

Usually we don’t monitor how we use the battery and don’t notice how much harm we cause it. However, you shouldn’t worry too much about this and constantly worry when the gadget turns off on its own initiative or due to the user’s inattention. Apple carefully monitors the quality of its products.

Therefore, even with normal use, the battery will function as before for the standard three to four years. Ideal scheme There is no way to increase battery life. Just don't overuse the capacity, always keep an eye on the charge and beware of extreme temperatures.

You can replace the battery on your iPhone, or find and eliminate the reason for the rapid discharge of the battery in our service centers - Contact us!

Correctly charging batteries for long service life

Actively used laptops (Macbook Pro, Macbook Air), smartphones (iPhone) and tablets (iPad 4, iPad mini) constantly need recharging. However, not everyone knows how to charge correctly to extend the life of the battery. So you can hear two different opinions, one of which says that the battery of any mobile device, be it a MacBook Air or an iPhone 5, you should completely discharge it and then charge it to 100%, and the second advises maintaining the device's charge level at about 40-80% by regularly recharging the devices.

These tips are not without meaning and have a very real background. In the recent past, nickel batteries were common, which had the so-called “memory effect”. So they had to be completely discharged. Nowadays laptops, smartphones and tablets (especially when it comes to mobile Apple technology) mainly lithium-ion batteries are installed, for which this problem is not so acute. However, in order to prolong their uninterrupted operation as much as possible, since their service life is measured in years, it is necessary to adhere to certain rules of use.

1. Devices require regular charging.

The device should not be completely discharged; it needs regular recharging. It would be optimal to recharge after the battery has been discharged by 10-20%, without lowering the charge level even to 50%.

2. It is unacceptable to keep devices charged for a long time.

Lithium-ion batteries do not require constant fully charged. The recommended charge level should be between 40 and 80%, so it is advisable to adhere to these limits. After charging the device to 100%, it is unacceptable to leave it further charging.

Sometimes this seems very convenient, but you should remember that this is what can shorten the battery life. Even if the device is charged overnight, you should make sure that this is done using special energy-saving sockets that will allow you to turn off charging after a certain number of hours.

High-quality phones and laptops have a built-in charge controller, which allows them to signal when they are fully charged and even turn off charging themselves after that. Devices with this function can be kept connected to the network at all times.

3. Once a month, the battery must be discharged to zero and fully charged.

Occasionally full iPhone drain or an iPad is still necessary. Once a month it is recommended to carry out a full cycle of discharging to zero and charging to 100%, which allows you to calibrate the device. After all, on a smartphone or tablet, the remaining charge is most often indicated either as a percentage or in hours and minutes, after which complete discharge will occur. But frequent use of small charges leads to incorrect operation this function, therefore it is necessary to perform a calibration to return the accuracy of these readings.

4. It is unacceptable to overheat the device.

The battery life of, for example, an iPhone device may also be reduced due to overheating, so you should not allow it to be exposed to high temperatures.

By following these recommendations, you can significantly increase battery life. However, you should not panic too much if you are not always able to perform optimal charging. Even if the device is discharged once again to zero or there is a need to charge it to full before a long journey, this should not become a reason for unnecessary worries.

It is worth remembering that maximum care for lithium-ion battery will not allow it to work forever; usually such a battery lasts only 2-3 years. By the way, it will last just as long even if it just lies unused. So you shouldn’t get hung up on strictly following the recommendations; you should stick to the regime that is convenient, but without neglecting and, if possible, using the above rules.

We have updated and improved this article to be better, more specific, based on the latest scientific research and combined with our more than 11 years of experience. It is available at this link.

You recognize this situation: after leaving for another city or traveling, you suddenly remembered that your iPhone charger was left lying on the coffee table at home. The situation, naturally, is not a pleasant one, because without a gadget in our time, it’s like being without hands. Due to the fact that the battery does not last forever, you need to think about how to charge iPhone 5 without charging.

How to quickly charge an iPhone via USB port

It’s good when there is a person nearby who could borrow his charger, or there is a service charger somewhere nearby apple center. But fate rarely gives such gifts. It would be strange not to start with the simplest - USB port. Surprisingly, for some users even this information may be a revelation. If you have an iPhone charging cable (without a power supply) and a laptop/PC at hand, you can quickly and easily charge your phone. You just need to plug the cord into the USB connector and wait for the treasured hundred percent of the battery.

How to charge an iPhone without a cord using alternative power sources

The problem of a forgotten charger at home can now be easily solved with the help of alternative power sources. You can replenish the required battery supply using external batteries. Portable storage devices have firmly established themselves in the market for essential and everyday goods. This small box, which can be ordered/purchased in an online store, is capable of delivering four full charges to your favorite smartphone. The choice of device depends on the capacity reserve, expressed in mAh value, additional functions(flashlight), design.

Thanks to portable battery You can forget about the dying battery for several days, although the charging process will take a little longer. Simply connect the accessory with mobile cord and click the “enable” button. Wide choose of these devices on the market allows you to buy it inexpensively - the price is from 500 to 5,000 rubles, depending on the capacity. As an alternative, inventors have come up with several more types additional sources power supply:

From solar battery. In the catalogs of online stores around the world you can already find these simple devices By affordable price. They look like external batteries with only one exception - they need to be placed in a place where there is direct sunlight and the phone will be able to stay afloat for a long time. Thanks to this method, you can quickly solve the following question: how to charge an iPhone without charging.
From the fire. Unusual device, whose job is to convert thermal energy into electrical energy. Special braziers are placed on the fire, a cable is connected to them, and the phone begins to quickly dial up interest. This charging method is ideal for hikers and those who don’t know how to charge an iPhone 5s without charging in nature.

Wireless charging for iPhone iQi Mobile

Recently, the gadget market has been replenished with another new product - wireless charging iQi Mobile for Apple iPhone, sold at prices ranging from 1,200 to 3,000 rubles. The principle of operation is very simple - electromagnetic energy is used, acting inductively on a special battery attached to the phone. It sounds complicated, but in reality everything couldn’t be simpler: this is a thin plate 0.5 mm thick, which fits under any case and is connected to the smartphone connector with a lighting cable. After this, the iPhone is placed on a special docking station and charged wirelessly.

Charging case for iPhone

Very popular product Nowadays, a special battery case has become a thing, after putting it on the iPhone begins to rapidly replenish the battery capacity. The device has a capacity of 2200 mAh, which is enough to extend the life of the smartphone by a good 1.5-2 days. Important point- this is to take care of charging the case itself in advance, otherwise it will turn into only a protective shell and, I would like to note, a very weighty one. The design of the accessory is laconic - one “turn on” button and an indicator panel displaying the remaining battery. The cost of the gadget is reasonable – it sells for between 800 and 2,000 rubles.

What to do if the iPhone does not charge from the original charger

WITH similar problem encounters a lot of people. Original wire, produced by a large American company, can break for various reasons. This could be incorrect handling, ordinary technical problems, inoperability of the connector on the phone itself, and much more. Let's consider solutions in cases where the standard factory charger does not charge the iPhone:

A mistake in software. Sometimes malfunctions occur in the program that sends signals to a special charging controller (chip). If the software is in a “frozen” state, then the phone will not be able to recognize that the current has already flowed. There is a simple solution - simultaneously press and hold the Home and Power buttons on your iPhone for about 30 seconds before the reboot begins. After this, the smartphone should start charging.
The port that helps charge the smartphone is dirty. Common problem, which occurs among those people who like to carry a mobile phone in their pocket. Debris particles fall into the lighting hole and prevent the flow of current. The solution is simple - take a simple toothpick and use it to get out the dirt, and then blow it thoroughly. That's it, you can connect/charge.
USB port problem. If you don’t know how to charge an iPhone without charging and are using a cord connected to a PC or laptop, then you need to check all inputs for functionality. The problem is solved this way: just plug the wire into another USB port or use a regular 220V plug - you can charge.
There is a fault in the cable. It happens that when the wire is connected, the phone does not show any signs. This means that somewhere in the cord there is a break that can only be repaired by a specialist. The best solution is to buy a new iPhone charger.

Check out the ways...

Charging your phone with another charger

If none of the methods described above turned out to be useful, then there is only one option left, which is better to resort to as a last resort - connect the iPhone battery directly to other chargers. It should be noted right away that using this method is dangerous for both the person and the device, which will have to be opened in any case. Take precautions - carry out the operation with rubber gloves, do not touch bare wires with your skin. Scheme of how to charge iPhone 4 without charging (original):

Disassemble the iPhone and disconnect the battery.
Take any charging device, cut off the connector to connect to the phone.
Connect two exposed wires of different colors in series to the contacts on the battery, which has polarity indicators (blue to +, red to -).
Press the wires tightly and secure with electrical tape.
If you did everything correctly, then when you turn on the iPhone, it will show signs of life.