ZTE network equipment: setting up routers for Rostelecom. Setting up a zte f660 mgts router: step-by-step instructions Setting up a zte router from Rostelecom


The zte zxhn h108n router, released last season, has found wide use in the networks of the largest telecom operators. The Ukrtelecom provider is no exception, which recommends purchasing this device to connect to its network and rents it out.

The modem supports Internet connection using ADSL technology. It can provide access to the global network to four subscribers via a wired interface, and the device is also equipped with a WiFi module for creating wireless connections.

The presented instructions will show how to configure the zxhn h108n or a similar device zxv10 h108l to work with the Ukrtelecom provider. It is worth noting that the algorithm for connecting a WiFi router to other telecom operators is not very different, so the instructions will be useful for users of other networks.

To connect a WiFi router to the Ukrtelecom network using ADSL technology, perform the following operations:

Connect the power supply to the Wi-Fi modem via the “Power” connector, then plug it into the electrical network.

Connect the “Line” port of the splitter included with the WiFi router to a telephone socket. Connect the zxhn h108n or zxv10 h108l to the “Modem” port, on which the required socket is marked “DSL”. Connect a telephone device to the “Phone” port, if you have one and have concluded an agreement with Ukrtelecom for the provision of this type of communication.

To configure the parameters of zte zxhn h108n or zxv10 h108l, connect your computer to it via an Ethernet cable (included). To do this, use the “LAN1” port on the Wi-Fi modem, and on the PC the network card connector.

Computer settings

In cases where the computer is connected, and the corresponding LAN indicator on the front panel of the WiFi router does not light, you should configure the PC’s network card.

Windows 7

Through “Start”, activate “Control Panel” and click on “View network status and tasks”.

Click on “Change adapter settings”.

Right-click on the active connection. A list will appear where you should select the “Properties” value.

Double click on “Internet Protocol Version 4 (TCP/IPv4)”.

Switch the dialog flags to the states shown in the following figure.

Commit the changes by clicking “Ok” in all open windows.

In Windows 8 (eight), the setup is performed in a similar way, but in order to open the “Control Panel” you need to right-click on the “Start” menu and select “All applications”, where the necessary link will be.

Internet connections

Setting up a zte zxhn h108n or zxv10 h108l for Ukrtelecom is better from the factory settings, so the parameters of a used modem should be reset. To do this, press and hold the “Reset” button recessed in the device’s body for at least ten seconds, and then wait for it to reboot.

The modem connected to the network using ADSL technology and to a computer via an Ethernet cable is configured using the following algorithm:

Log in to the device’s web interface using an Internet browser; to do this, type the link 192.168.1.1 and start clicking on it.

Open the browser, enter http://192.168.1.1 in the address bar

login and password for the router admin\admin

In the main window of the Wi-Fi router interface, find the link to the “Interface Setup” tab and click on it, and then on the “Internet” settings item.

DHCP

To configure a DHCP connection, change the field values:

PPPoE

To configure a PPPoE connection, the fields change:

Once you have completed setting up the required connection, save the changes by clicking “Save”.

To make the change take effect, restart the WiFi router by going to the “SysRestart” item in the “MainInterface” tab. Here select “Current Setting” and click on the “Restart” button.

Wait until the zte zxhn h108n or zxv10 h108l reboots and access the Internet from your computer using ADSL technology.

Wi-Fi setup

To enable the function of providing wireless Internet access via WiFi, you must perform a number of additional steps:

In the web interface of the Wi-Fi router, go to the “Interface Setup” tab, where open the “Wireless” item.

Set up the following page fields:

  • "Access Point": Activated;
  • "Wireless Mode": 802.1 1b+g+n;
  • "Chanel Bandwidth": 20/40 MHz;
  • “SSID”: the name of your network, displayed in the list of available connections on subscriber devices. It is chosen arbitrarily, but only numbers and Latin letters are allowed;
  • "Authentication Type": WPA2-PSK;
  • "Encryption": TKIP/AES;
  • “Pre-Shared Key”: arbitrary network password, numbers and Latin letters are allowed.

Save the changes by clicking the “Save” button and rebooting the WiFi modem according to the algorithm specified earlier.

Wait until the reboot completes and connect your Wi-Fi devices to the Internet.

Found a typo? Select the text and press Ctrl + Enter

The router from the manufacturer ZTE is a model that can only operate on FTTB lines. The ZTE ZXHN H118N Rostelecom router can be configured either using the wizard built into its program or manually. IPTV and SIP telephony are supported.

Login can only be done after connecting the Internet service provider cable to the WAN port (RJ-45) on the back panel of the ZTE ZXHN H118N Rostelecom router. One of the 4 ports of the LAN router (RJ-45) is connected by an Ethernet line to the network card connector of the computer (PC) or laptop used for configuration. You must first set the device to automatically obtain addresses on the Internet Protocol version 4 page.

According to the information on the sticker, you can see that the IP address of the device is 192.168.0.1 - and by default its authorization data is used: user name - admin, password - admin. The network address is entered into the address bar of the web browser used on the PC, and information about the login and password is necessary to fill in the fields of the window that opens.

The router program requires that the provider's cable be connected to the WAN connector, and the first login page will remind you of this if the necessary condition is violated. If the router detects an Internet connection, the page will look different. It will prompt you to select a time zone and the need to change the factory password with the corresponding information fields.

After completing the safety requirements, you must click on the “Continue” stencil and go to the next page. On it you need to select the proposed configuration method: “Start the wizard”, “Configure the device manually”.

How to make the menu complete

The Rostelecom router is configured after selecting manual settings. To enter the menu, you must enter the user name - admin - and the created individual password. When you click on the “Login” tab, you go to the start page of the router interface with general information about the device. The “Network” item on the left side opens the possibility of selecting the type of WAN connection.

When setting up, the data provided by the provider when concluding an agreement with him is used: the type of Internet connection (PPPoE), the number of the enabled VLAN (fiber optic) and its priority, username and password. The connection you create must be "Always On". The information you enter is saved when you run the Edit command at the bottom of the page.

To use the TV viewing function, you need to re-open the list of possible WAN connections and select IPTV from it. In the connection type line you must use "Bridge" and then execute the "Create" command. After this, you need to go to the “Port binding” item in the WAN section of the main menu.

It performs software assignment of connectors LAN1-LAN4. For PPPoE, ports LAN1-LAN3 are selected by default. Computers will be connected to them. For IPTV you need to assign LAN4. It will come with a set-top box that will use it via an Ethernet cable line. After checking the selected boxes, click the “Save settings and confirm” button.

Setting up Wi-Fi on the ZTE H118N Ethernet router

Router manufacturer ZTE provides its products with a configured Wi-Fi wireless connection. Information about the network name and access password can be found on the label on the router case. But the connection setup can be done manually. To do this, in the VLAN (Wireless Network) section of the menu, select “Set up Wi-Fi networks”.

On its page you can change the factory values ​​to your own. After selecting the "Security" item, you can change the authentication type and encryption algorithm. Finally, click the save button (“Apply”).

Popular settings

You can use automatic configuration of the Rostelecom router after the proposed change of the factory password. If you then click on the “Start the wizard” stencil, then in the next step you need to select and indicate the region, branch and service of Rostelecom. After continuing the setup, you need to fill in the login and password fields issued by the provider when concluding the contract. If the branch uses Dynamic IP, this data will not be needed.

When connecting a set-top box, it must be assigned a LAN4 port. After continuing, the wizard will prompt you to change your authorization data. You can do this and continue. The next page prompts you to enter the settings with the new Wi-Fi network values, administrator name and password, and click the “Save settings” button.

A router is a network equipment that allows multiple devices to simultaneously access the Internet (computers, tablets, smartphones and much more). Today's range of routers allows you to choose exactly what is most suitable for a particular case.

Review of routers

There are several models that are optimal for use at home:

  • Zte E5501;
  • Zte H118N;
  • Zte E5502;
  • Zte ZXA10 f660.

ZTE E5501

This device supports many interfaces:

  • 4 ports for an RJ-45 connector (which allows you to work with data via a network interface, the cable type is determined automatically);
  • operates according to the 802.11n communication standard (2.4 GHz frequency);
  • There are two non-removable antennas that ensure stable Wi-Fi operation.

In addition to the supported interfaces, this device has many other options that make its use quite convenient and simple.

Zte H118N

A router of this type in its design has:

  • USBv.2 in the amount of 1 piece for connecting a 3G modem (optional);
  • 4 ports for connecting a cable crimped with an RJ-45 connector;
  • Wi-Fi (IEEE 802.11n).

The maximum data transfer rate of this device is 300 Mbit/s. Several data encryption technologies are also supported - WEP, WPA, WPA2.

ZTE 5502

The router in question from such a renowned company is in no way inferior to its classmates:

  • 4 ports for cable connection via RG-45 connector;
  • supported: IEEE 802.11n (maximum transmission speed – 300 Mbit/s);
  • there are two antennas for operation in the 2.4 GHz band;

The encryption capabilities of the device in question are the widest:

  • WEP with 64/128 bit encryption technology;
  • WPA-PSK;
  • WPA2-Interprise and many others.

ZteZXA 10 F660

The ZTE router not only has excellent performance characteristics, but also a relatively low price.

It is easy to set up and also supports all the necessary technologies:

  • there are 4 connectors for RG-45;
  • 2 connectors for working with the POTS interface (RG-11);
  • works successfully with Wi-Fi technology;
  • There is a connector for connecting USB devices.

Selecting a device

When choosing a router for your home, you need to consider the following important points:

  • ease of setup - so that in case of any problems you can fix them without calling a specialist;
  • price - this issue is especially relevant for those families with many children;
  • reliability;
  • features of the Wi-Fi module.

The simpler the design of the device, the easier it is to configure. That is why you should give your preference to those routers that do not require dancing with tambourines while connecting and getting started. This will save a lot of time.

Video: How to open a port on the ZTE ZXA10 F660 router

Price range is a very important point. Today there is no point in purchasing expensive devices. Since even the youngest models in the line have on board everything that is required for comfortable work with a Wi-Fi network at home. You shouldn’t overpay for a model’s brand – usually such expenses are completely unjustified.

When choosing the best option for the price, you should not purchase very cheap models. Since often the extremely low price does not mean the highest quality of workmanship, which can soon lead to breakdown.

The Wi-Fi module must have an antenna located outside the case. Since antennas of this type cover a large area. Which is very important if the apartment or house has a large area. Also, the antenna should be removed and replaced if necessary, as it may be necessary to expand the coverage area.

The optimal choice in all respects is the ZTE ZXA10 F660 router. It has many advantages, as well as a fairly low price (considering its pretty good parameters).

PC connection

The easiest part of setting up a ZTE router is connecting it to a PC. This operation is performed in the following order:


Manage Settings

How to set up a ZTE Wi-Fi router? Settings are managed using a WEB interface, which can be accessed through any browser installed on a PC. For example, internet explore. In the address line you should enter the following combination of numbers and symbols - http://192.168.1.1. If the router is connected to the computer according to the instructions, a window will appear in which you can enter your login and password.

The default password and login is the word admin (in Latin letters only). When the fields are filled in, click the “Login” button. Next, a window will appear, made in green and white colors.

At the top there are the following tabs:

  • status;
  • network;
  • security;
  • application;
  • administration.

Each tab allows you to manage one or another section.

To set up Wi-Fi, follow these steps:


Using this list of actions, Wi-Fi is turned on.

Special attention should be paid to the section called “Multi-SSID”.

If desired, this section allows you to make the network both open and closed for various types of devices:

  • SSIDName – this item allows you to name the configured network by any name;
  • MaximumClients – the maximum possible number of simultaneously connected devices (this model supports 32);
  • EnableSSID – enable or disable the network being changed;
  • HideSSID – hiding a wireless network;
  • ChooseSSID – select a changeable Wi-Fi network.

There is also a Security section where you can configure the following items:


When choosing a password, it is advisable to follow the following recommendations:

  • the presence of lowercase and uppercase letters (in random order);
  • The password must be at least 10 characters long;
  • The presence of numbers is also desirable.

Setting up a ZTE router for providers

The ZTE ZXA10 F660 router is configured differently, depending on which Internet service provider is (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up work with this operator requires special care, since all the nuances should be taken into account:


In the “Multi-SSIDSettings” and “Security” sections, all settings are set according to the instructions supplied with the device.

Particular attention should be paid to the “AccessControlList” section. The “Mode” item should be set to “Block”. "MACAddress" - 00:13:e0:81:97:ee.

Rostelecom

Setting up a router to work with the Rostelecom provider is not difficult.

You need to do the following:


When the above steps are completed, you should configure the “Multi-SSIDSettings” section:

  • in the “ChooseSSID” item set the SSID value;
  • check the box next to “EnableSSID”;
  • "SSIDName" allows you to select a network name.

After completing all settings, you must click the “Submit” button.

MGTS

To correctly configure the router model in question with the “MGTS” driver, you must perform the following steps in strict order:

This will enable Wi-Fi. The remaining settings are made in accordance with the manual supplied with the router.

It is also imperative to configure a section called Multi-SSID. This section allows you to set a personal identifier for the network, and also, if desired, hide it. All settings are made individually, depending on the personal preferences of the user.

The section called “Securiry” allows you to configure encryption settings and a password for connecting to the network.

The ZTEZxa10 F660 router is the optimal device in terms of price-quality ratio. An excellent choice for home and office. This network equipment is easy to configure, compact, and reliable.

>

ZTE routers are known to Russians. Megafon supplies subscribers with mobile options that cover exclusively the cellular network. Reception speed reaches 150 Mbit/s. The modem distributes wireless Internet. The portable option is often the choice of remote, relatively small settlements. Residents of Udmurtia are now familiar with the MR150-5. A region to the north of which there are only forests and tundra.

Chinese ZTE products are characterized by relatively low cost and availability. Even prisoners appreciated the benefits of 4G mobile communications. Recently, attackers tried to transfer 29 ZTE routers to the Tula colony. Valiant law enforcement officers managed to prevent the illegal transaction. Let's see exactly how to configure the router. Often the audience is interested in instructions for changing the password.

Briefly about ZTE

In addition to routers, mainly mobile ones, that supply subscribers with a Wi-Fi network, the Chinese corporation supplies a full range of user equipment, including IPTV digital television set-top boxes. Over half of the products produced are serviced by provider networks. Many Chinese telecommunications service providers now use domestic equipment.

The history of ZTE exceeds 30 years. One of the investors was the Ministry of Aerospace Industry of China. Initially, the main income came from consumer goods, but the booming communications industry overwhelmed the enterprise with government-managed orders related to CDMA cellular networks. As of 2006, 40% of the company's income came from operator equipment. At the same time, offers from foreign companies began to pour in. The first was the Canadian Telus.

A year later, Vodafone (UK), Telefonica (Spain), Telstra (Austria) ordered Chinese equipment. The 2008 client base included customers from 140 countries. ZTE took third place in the market of GSM communications equipment manufacturers (about 20% of global sales). Gradually, the company mastered the production of smartphones. The corporation's engineers filed over 48 thousand patents, and 13,000 were confirmed in just two years (2011-2012).

Sometimes the company's equipment does not work...

Define name

First of all, determine the true name of the device. For example, MF920W is called by providers as follows:

  1. MTS – 835F
  2. Yota – MF920
  3. Megafon – MR150-5

A thorough study of the issue will help you choose the right firmware. An incorrect version may cause the device to malfunction. This type of hardware will not turn on and will require flashing. By the way, studying the forums in advance will show the potential buyer the current problems of the model. For example, the one mentioned above often lacks a charger and there is no antenna output. Therefore, choose a different model for your dacha. An additional bonus is that amateur flashing utilities refuse to identify the modem.

Nuances noted by users will sometimes become the main criterion. A telecommunications store clerk interested in sales is unlikely to advertise the dark side of the equipment. For example, MF823 requires a Beeline card with a USIM sticker. Otherwise, 3G technologies are used instead of the fourth generation. There are no updated firmware versions.

Common Problems

Saving readers' time, the thoughtful admin installed a plugin that draws convenient navigation according to the generated subheading tree. Therefore, we will devote a separate small section to each problem. ZTE primarily produces mobile modems, sometimes supplemented with a GPON fiber optic line interface.

Doesn't turn on

First of all, we remember whether the flashing was carried out. If unsuccessfully carried out manually, the operation completely removes access to the router. It is noteworthy that the appearance of the device (indication, backlighting of the Ethernet interface) is the same. However, it is impossible to connect a PC or equipment to the router. The browser writes: Unable to connect.

The hardware reset button is powerless to solve the problem. The firmware needs to be updated. Reputable manufacturers provide specialized utilities that help savvy technicians solve the problem. However, the Chinese manufacturer is keeping mum for now. Hackers have released the ZTE Unlocker utility, but the interface deals exclusively with the issue of unlocking (unlinking from a specific provider). The software actively exploits the diagnostic port specification.

A working device understands the terminal language, including the Windows command line. The operating system allocates a virtual directory to the device, within which commands stored in the router's memory are executed. For example, adb shell. However, standard management paths will refuse to help restore the firmware on the router. Enthusiasts offer the following option.

Sometimes the desire to unblock is caused by someone else. For example, the developer removed support for the FTTB protocol from the H108N model. All users of the interface were forced to immediately rollback. Only now... the manufacturer has released one utility that performs an upgrade. One way ticket.

Recovery utility

Often a broken ZTE modem is detected by the diagnostic interface. The official website (ztedevice) provides owners of MF30 (Beeline) exclusively with an update utility. There are no other models at all! The website 3ginfo.ru offers those who wish to download: “ZTE MF30 recovery kit.”


Now the folder containing the previously unpacked firmware image needs correction. The software read the device memory, adjusting the contents of the internal directory. However, the utility is powerless to enter IMEI. Therefore, edit the Channel1.nvm file yourself. Please enter the correct IMEI.

Now run any flashing utility (for example, 3ginfo.ru/downloads127.html). Feed the program the files, including the edited Channel1.nvm. Now the router is finally restored.

A similar sequence of actions helps to revive some other mobile access points (for example, MF90).

JTAG

It helps bring back life to many dead devices. Let's briefly describe the essence. In the 80s of the twentieth century, integrated circuit switching standards were deprived of a debugging interface. Therefore, in 1985, a special JTAG group was created to solve the problem. The industry standard became commercial (IEEE 1149.1-1990) in 1990. Intel immediately provided the 486 generation of processors with a debugging interface.

Now the standard is used by electronics manufacturers everywhere. Initially, the interface was solely for testing purposes. Then the opportunity became of interest to debuggers, including the machine code level. Later, manufacturers figured out how to exploit JTAG by updating the firmware of flash memory chips. Real boards use the number of pins:

  • 5 and so on.

The latter options are more often used when there are many parallel-connected microcircuits. The first option accompanies the star topology. Therefore, the problem is limited to calculating the pin layout of the JTAG port. Modern interfaces often contain 10 or more contacts, so take the trouble to find technical documentation that explains the meaning of the contact pads. The contacts themselves are round or rectangular in shape, often located along the edges, sometimes in two rows.

The pinout is difficult to find, since the subject is the bread and butter of repair shops. Try to puzzle thematic forums (for example, gsmforum.ru). You will also need a complete memory dump, take, for example, here 4pda.ru/forum/index.php?showtopic=255231&st=3040#entry36468746. The current memory dump (in reserve) is merged by the H-JTAG utility. You will need an adapter connector (the type is entirely determined by the utility used for recovery). Craftsmen usually adapt the now outdated LPT. Solder the adapter with shunt resistors, get specialized software (for example, Z_Flasher Reanimator is used to restore cellular USB modems).

A memory dump using the Giveio utility helps determine the processor type. This will be needed later when flashing. So, for work you need:

  1. A utility for backing up the current memory dump.
  2. Compatible modem firmware version. Try going to byfly. The FTP server provides a certain choice: H208N, ZXHN H208L, H201L, W300. By the way, the Belarusians took the trouble to post a beginner resuscitator kit, including instructions, in the shared server folder (ftp.byfly.by/byfly/firmware_modem/ZTE/).
  3. Flashing utility via JTAG interface.
  4. DIY connector. The utility sets detailed requirements for the adapter. An example of using LPT was given above.

Along the way, they exploit the capabilities of supporting software. For example, determining the type of processor.

Doesn't allow me to access settings

The live router is accessible via a browser or remote administration interfaces (TelNet, SSH). However, the admin panel does not launch inside. The factory settings have probably been changed. After making sure that you have the ISP password written down, try resetting the device with the Reset key (otherwise you will lose the Internet until your mother arrives). Then the previous equipment characteristics will return:

  1. IP address.
  2. Login.
  3. Password.
  4. SSID, Wi-Fi security key.

Refuses to distribute Wi-Fi

Ukrtelecom subscribers have flooded the TP with complaints: ZTE H108L refuses to connect wireless subscribers. You will need to change your settings.

  1. Open the admin panel (192.168.1.1 in the browser).
  2. Enter your login/password (admin).
  3. Click Administration → System Management → Restore Factory Settings.
  4. Apply the changes and wait until you reboot.
  5. Re-enter your ADSL connection login/password.
  6. Set the following settings on the Administration → TR-069 page:
    1. ACS URL – https://localhost
    2. Login – loose
    3. Password – 12345678

Port forwarding

It is often necessary to set up a home PC from the outside and organize a server. Network protocols use communication ports everywhere. The modem was originally designed with protection against hackers. Access inside (Intranet) is completely absent. Therefore, port availability needs to be configured. Let's demonstrate the technique of making adjustments using the example of H118N.

Note. The specified model shares Ethernet. The previous one (H108N) is equipped with two interfaces: FTTB, ADSL.

The simplest option to defeat Rostelecom hardware is to use the built-in Application menu. Activate the UPnP subkey. The port number is specified as a number. A little lower is a specialized section. The Port Forwarding menu will help you set the required numbers. Take the trouble to check the Enable box.

The third way is to set up a demilitarized zone. Creating a dedicated service helps limit the damage of a possible hacker attack. The settings are the same:

  1. Connection type + port (in one line).
  2. Local IP address of the PC.

Note. Sometimes translators call port forwarding redirection.

First check the functionality of the service provided externally within the network. Helps reduce setup time.

Unlock

It happens that sometimes a subscriber wants to change provider. I bought an MF823D, I was eager to switch to Iota, or I was tired of MGTS, and the F670 refuses to eat someone else's SIM card. To change service provider, you must unlock the hardware. Megaphone MF823 is called M100-3 - the essence is the same. Unlocking is closely related to flashing issues. A provider-neutral binary image is selected.

Attention! Before installing the firmware, carefully study the forums. Some home-grown versions of the software partially break functionality. Example - H118NV2.0.1d_E04_OV DOMRU removes the web interface (via browser). Telnet access remains. I have to reflash it.

Instruction: Model MF823D

You will need a firmware image. Get it using search engines.

  1. Download the PuTTY terminal emulator.
  2. Install the ZTE diagnostic mode driver.
  3. We turn on the equipment.
  4. We feed the browser the intricate link 192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY.
  5. The modem will send a response containing the line OK.

The hardware should go into diagnostic mode. Check by opening Windows Task Manager. The properties contain the number of the serial port; opposite the corresponding COM there should be the inscription ZTE Diagnostic Interface.

Open a PuTTY terminal, copy the image to the serial port, the number of which is shown in the task manager. All that remains is to rescue the device from diagnostic mode. Open the terminal again, set the mode parameters:

  • Protocol – Serial (serial port).
  • COM line number (according to the Task Manager information listed above).
  • Try setting the speed to 921600.

The terminal window will be completely blank. Enter the commands one by one, pressing Enter each time:

  1. AT+ZCDRUN=8
  2. AT+ZCDRUN=F

Each time a device response may occur containing the number of successful and failed operations. The operation is completed. Reboot your device.

Modem ZTE MF90+

  1. Install the router according to the instructions.
  2. Open the admin panel through a browser (m.home, or the IP address specified by the manufacturer).
  3. Setting up Wi-Fi access. Open the web interface (by entering your admin login/password). Leave one device in this position. Later it will be possible to use the graphical shell, although the PC connected by cable will no longer open the menu.
  4. We feed the browser (via cable) the lines to enter diagnostic mode: m.home/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY.
  5. The successful completion of the operation is completed with a response (“result”:”FACTORY:ok”).
  6. Device Manager now contains unidentified objects. Diagnostic mode driver required. Install the necessary software.
  7. Once the devices are identified, the question marks will disappear. Select ZTE Mobile Broadcast Diagnostic Port. Look at the number among LPT/COM. Find out the exact name, for example, COM9.

We find the firmware image. Open any terminal (including the Windows command line). Copy the image from the directory to the serial port defined earlier. For example:

  • copy/b<имя_образа>\\.\COM9

The choice of port number is illustrated earlier, the image name is known, including the location. The /b prefix means the binary mode of the transfer operation (since the firmware file is in binary format). Reboot your device.

The device manager has been updated with four new lines. Each carries the memorable name ZTE Technologies MSM. Among the properties, open the Information tab, looking for the identifier USB/VID_19D2&PID_1404&REV_5099&MI_06. Install the ADB-MF90plus driver here. The archive distributed by well-wishers contains the file ADB.EXE. Change the current command line directory by feeding the command: adb devices


2024 gtavrl.ru.