Make the DVD bootable. Programs for creating a boot disk


Installing Windows is an inevitable occurrence for everyone personal computer. The most popular operating system from Microsoft is Windows 7. This version is different simple interface and support for almost all devices and programs.

Usually, Windows installation happens or with DVD disc or from a flash drive. The Flash drive allows installation on computers that do not have a DVD drive. But if the user formats the flash drive sooner or later, then the DVD disk will most likely always be stored, allowing you to reinstall operating system any time.

What is a boot disk

A boot disk is a medium that contains bootable operating system files. Simply put it is a disk or usb drive c Windows installer. A boot disk allows you to install an OS without having an operating system on the hard drive itself. That is, even in the most critical situations, you can reinstall your Windows.

What you need to create a bootable disk

For creating boot disk you will need:

  • Windows image. For ease of recording, it is recommended to download operating room images into ISO format. On this moment present great amount various Windows builds 7. It is strongly recommended to download images that are as close as possible to a licensed copy of Windows. This option provides the highest operating system stability. You can download a Windows image from numerous torrent trackers.
  • DVD disc. Both DVD-R and DVD-RW can be used.
  • program for recording an image. At the moment there are many various programs, providing the ability to burn Windows 7 images to disks and flash drives. The programs include applications both provided directly by Microsoft and from third-party developers.

Disc recording methods

The methods for writing boot images to disk differ only in the program that is used. The principle of operation in most programs remains the same: the program writes files, creating boot file, which will allow you to start installing Windows even without an operating system on your computer.

Video: How to make a Windows 7 installation boot disk

Burning an ISO image to a DVD disc

You can use many programs to burn a bootable disk; we will look at just a few of them. How to create a bootable Windows 7 disk using Nero? How to correctly create an ISO image in Nero?

To burn a disc, you must perform the following operations:


How to create a bootable disk using Ultraiso for windows 7?

To create a bootable Windows 7 disk using the UltraISO program, you must perform the following steps:


Creating a disc by copying

In addition to writing operating system installation files to disk, the user also has the ability to create backup copies of the current operating system with the possibility of further restoration. It is recommended to perform a backup immediately after installing Windows and all drivers. There are many programs for creating backups, one of the most popular is Acronis.

How to create a bootable Windows 7 disk using Acronis?

Acronis can create backup copies of your current operating system for later recovery. In order to restore a backup, you must also create a bootable Acronis disk, which will boot without operating Windows systems, in case your system stops booting. You can save a backup copy of your system either on your hard drive or on a flash drive.

Creating an Acronis boot disk


Creating a Backup

For creating backup copy of your disk from the current operating system, for further recovery you must perform the following steps:


Restoring Windows from a backup

Restoring from a previously created backup copy of your disk from the operating system can be performed in two ways: from Windows environment or with bootable media, which you created in the previous paragraph. Recovery from bootable media is performed if your operating system does not boot.

To restore a copy of a hard drive partition from a computer (from Windows), do the following:

  • open Acronis program True Image;
  • select the “My backups” section;
  • click on the “Restore” button next to your copy;
  • in the next window, select what you are going to restore;
  • To start execution, click “Restore Now”. After the reboot, the recovery process will begin.

To restore a copy of a hard drive partition from bootable media, you must do the following:


How to Create a Windows 7 Boot Disk Using Daemon Tools

To create a boot disk with using Daemon Tools you need to do the following:


Create an installation disk using alternative programs

In addition to the proposed programs, there are also official application to record Windows 7 installation files from Microsoft - Windows 7 USB/DVD Download Tool.

DTo create a boot disk using this program you must:


At the moment, there are many different programs that allow you to create a boot disk or bootable Windows flash drive 7. Using these instructions, you have the opportunity to create several various options bootable media from installation files operating system.

Most important point is the choice of the operating system image itself. We strongly recommend that you do not download various assemblies that include a set of programs. Copies of Windows those that are as close as possible to the licensed version will provide the most high level stability during operation.

Creating a bootable disk using UltraISO

First, you need to download and install the UltraISO program from the Internet. The program is paid, but most Internet resources post already hacked versions (for example, on the website rutracker.org). You can also download the Windows image there if you haven't already. In addition, you will need a blank CD or DVD, which you can buy at any computer store or market 🙂 The further process is incredibly simple! Insert a blank disk into the drive of your computer, go to the folder with the already downloaded Windows image. Click right click mouse on the image, hover over the “UltraISO” inscription, move the mouse arrow to the right to the menu that appears and select “Burn to disk...”.

creating a bootable disk using UltraISO

The “Burn disc” window appears, there you simply click the “Burn” button and wait. When the recording is complete, the drive will give you a ready boot disk.

Creating a Boot Disk Using Nero

To create a boot disk using this method, you must have any version of the popular Nero program installed on your computer. Also, as in the previous method, you must have a blank CD or DVD and a Windows image. Launch Nero program Burning Rum(Start->Programs->Nero->Nero Burning Rom). You should see a window “ New project" On the left, select the “DVD-ROM (boot)” option from the list, then to the right of the “image file” line, click the “browse” button and specify the path to the Windows image.

Click the “New” button, then in the window that appears at the top, select “Record”. It is advisable to check the box next to “Finalize disc”. Insert a blank disc into the drive, if you have not already done so, and click the “Burn” button.

Wait for your boot disk to burn. That's it 😉 An article on installing Windows XP, and an article on installing Windows 7.

Best regards, Alexander Molchanov

Most often, the operating system does not load correctly if the files that launch Windows have been damaged. The reasons for such damage can be different: loss of files, damage to boot sector, viruses, incorrectly working drivers and others.

Unfortunately, this problem cannot be resolved quickly.

To prevent such a situation from creating problems and malfunctions, we recommend creating and keeping a boot disk in reserve. The fact is that the Windows operating system was designed in such a way that it could run not only with hard drive, but also from a CD. Moreover, in in this case reinstallation Windows is not produced we're talking about about loading the system itself.

A little theory

The boot disk is an ISO image - an exact copy of the software. That is, the image includes all the contents of the CD/DVD disc.

The program that will be used to open, create, edit and extract DVD files image will allow users to convert the extracted content into ISO image, which is an accurate reflection of the contents of the DVD.

What is required to create a boot disk?

To create a boot disk we need:

  • blank CD/DVD disc;
  • image with Windows XP. This refers to a CD/DVD disc containing the Windows XP operating system;
  • a program for creating and working with images. For example, Nero DAEMON Tools, Ultraiso. Beta versions of these programs can be downloaded from the official websites of the developer (www.nero.com, www.daemon-tools.cc, www.ezbsystems.com/ultraiso).

If you are convinced that you have everything you need, then you can get down to business.

Since the procedures for working with programs for creating images are somewhat different, we will describe step by step guide for each of them.

How to create a bootable disk using Nero?

Step 1.

To get started, take a boot disk with Windows XP and run it using the CD-ROM, launch the Nero program. Depending on the disc type - CD or DVD - run the appropriate project. In the list of project types, find the “Image creation” item. Please note that the project name may vary depending on the program version. In any case, the project name will contain either the word "image" or the abbreviation ISO.

Advice: use discs with the largest capacity for recording, since the entire array of information may not fit on standard disk, up to 700 MB.

Step 2.

In the list of information sources you should select optical drive, the receiver of information will be HDD. Click the “Next” button.

Step 3.

A copy window will pop up on the screen, followed by a window where you need to select the path to save the image.

Tip: to make the folder with the image easier to find, we recommend saving it on your desktop.

Step 4.

After clicking the “Save” button, the image creation process will begin. At this stage, all you need is patience - wait until the process is completed and the “Burning Complete” notification appears on the screen.

Step 5.

Now you can remove the boot disk with Windows XP, and instead insert a blank disk of the same size - CD or DVD.

Step 6.

You should select the “Burn image to disk” project. A window will pop up again in which you should determine the path to the image created the day before. Now you can start the burning process.

Step 7

Creating a boot disk using DAEMON Tools?

  1. ШTo create a new image in the DAEMON Tools application window, select the “Burn image” button (located on the top panel).
  2. In the window that appears, select the DVD drive. From the Write Speed ​​drop-down list, select highest value– “4.0”. In the “Path to image file” field, specify the path to the image installation disk Windows XP.
  3. After completing all the steps, click the “Start” button.
  4. DAEMON Tools will take some time to burn the image to CD.

How to create a bootable disk using Ultraiso?

Step 1.

Let's launch Ultraiso program. It is important that this action was executed with administrator rights. To do this, when you click on the program shortcut in the window that appears, select the “Run as administrator” option. Next, the program will prompt you to complete the registration procedure. When using the trial version, click on the corresponding button “ Trial period" and move on.

Step 2.

On the left side of the program, select the “File” tab. As a result, Explorer will open. In it you should select a file with the *.iso extension that contains the Windows XP image.

Step 3.

In the main menu of the program, select the “Tools” tab. In the menu that “drops down” at the top, click on the “Burn image” button.

Step 4.

Here are the main methods for creating a bootable Windows XP disk. However, we cannot help but mention another method - the “Dosov” method. Despite its relative complexity and some obsolescence compared to the previous ones, it also has a right to exist.

How to create a boot disk using the DOS method?

  • We create a folder on the hard drive in which we will enter all the necessary data. First of all, you should enter there file manager, adapted for DOS: Norton Commander, FAR or Volkov Commander.
  • To make it convenient to launch a file manager (for example, Volkov Commander), we create a bat file. It’s very simple: open notepad and enter:

Let me explain a little. The first line is a command to replace the directory with Volkov Commander. The second line is a command to run the file called "vc.com".

Save the notepad file under the name “vc.bat”. The presence of a file under this name makes it possible to enable Volkov Commander with a letter combination in command line: vs. And confirm everything with the Enter key.

  • Later, when you use the boot disk, you will need to select the exact drive letter that corresponds to the CD drive. This is done as follows: in the command line, write first D:, then E:, and so on until the notification “The disk is not specified correctly” pops up. The most recent disk in existence will most likely be your CD drive.

However, this should be checked. To do this, enter the command “dir” in the command line. This command will display all the files and folders contained on the disk. In this simple way, you can make sure that the disk is selected correctly and continue.

  • Next we will use Partition program Magic, namely its DOS version. The software designed to work with hard drives: formatting, hard division disk into partitions, converting types file system and much more.
  • In the folder where we collect everything necessary for the boot disk, we create an additional directory called “PQ” with program files. Similarly, with Volkov Commander we create a launching notepad file with the following content:

We give it the name “xp.bat”.

Thus, everything necessary for the boot disk has been created.

  • Launch Nero (or any other imaging program described above). In the menu that opens, select “Create a bootable data disk.”
  • Click the “Add” button and enter into the window all the folders and files that should be written to the installation disk. Then click the “Next” button.
  • At this point you may be asked to insert a boot floppy, ignore this requirement and select “Next” again.
  • Now directly select the “Record” button.

Creating a multiboot Windows XP disk

Unlike a boot disk, a multiboot disk can contain not only operating system files, but also other necessary programs. For example, text and graphic editor, social apps and so on. At its core, the procedure for creating a multiboot disk is not too different from that described above. All files necessary programs are accumulated in one folder, and then the image is recorded.

But let's take a closer look.

What do we need

As before, you need:

In addition, we will need the xpboot.bin file, as well as files of some program.

Guide to creating a multiboot disk.


In conclusion, we note that it is easy to check whether a boot/multi-boot disk is working. To do this, immediately after burning, return the recorded disc back to the CD-ROM. If it starts automatically and the “Run Autorun” window appears on the screen, congratulations, you succeeded.

We'll also give last tip: You may not be able to create a boot disk the first time, so we recommend rehearsing it on RW disks.

A bootable DVD or CD may be needed to install Windows or Linux, scan your computer for viruses, remove a banner from the desktop, perform a system restore - in general, for a variety of purposes. Creating such a disk in most cases is not particularly difficult, however, it may raise questions for a novice user.

In this instruction, we will try to explain in detail and step by step exactly how you can burn a bootable disk in Windows 8, 7 or Windows XP, what exactly is required for this and what tools and programs can be used.

What you need to create a bootable disk

Typically, the only thing needed is a bootable disk image and in most cases, this is a file with an .iso extension that you downloaded from the Internet.

This is what the boot disk image looks like

Almost always, when downloading Windows, a recovery disk, LiveCD or some other Rescue Disk with an antivirus, you get exactly the boot image ISO disk and all that needs to be done to get the desired media is to burn this image to disk.

How to burn a bootable disc in Windows 8 (8.1) and Windows 7

Burn boot disk from image to latest versions Windows operating system is possible without the help of any additional programs(however, this may not be the most the best way, which will be discussed below). Here's how to do it:

The main advantage of this method is that it is simple and straightforward, and does not require the installation of programs. The main drawback is that there are no different recording options. The fact is that when creating a boot disk, it is recommended to install minimum speed recording (and when using the described method, it will be written at maximum) in order to ensure reliable disk reading on most DVD drives without downloading additional drivers. This is especially important if you intend to install an operating system from this disk.

The next method, using special programs for burning discs, is optimal for creating bootable discs and is suitable not only for Windows 8 and 7, but also for XP.

Burn a bootable disc using the free ImgBurn program

There are many programs for burning discs, among which Nero (which, by the way, is paid) seems to be the most famous. However, we will start with a completely free and at the same time great program ImgBurn.

You can download the ImgBurn disc burning program from the official website http://www.imgburn.com/index.php?act=download (please note that for downloading you should use links like Mirror -Provided by, not big green button Download). You can also download the Russian language for ImgBurn on the site.

Install the program, and during installation, refuse two additional programs that will try to install (you will need to be careful and uncheck the boxes).

After launching ImgBurn you will see a simple main window in which we are interested in the Write item image file to disk (burn image to disk).

After selecting this item, in the Source field you should specify the path to the boot disk image, in the Destination field select the device to record, and on the right indicate the recording speed and, best of all, select the lowest possible.

Then click the button to start recording and wait until the process finishes.

How to make a bootable disk using UltraISO

Another one popular program for creating boot drives- UltraISO and creating a bootable disk in this program is very simple.

Launch UltraISO, select “File” - “Open” from the menu and specify the path to the disk image. After that, click the button with the image of a burning disk “Burn CD DVD Image” (burn a disk image).

Select the recording device, Write Speed, and Write Method - best left as default. After that, click the Burn button, wait a little and the boot disk is ready!

How to make a bootable flash drive, watch the video.

The OS installer media is useful. You never know at what point the system will refuse to work or a friend will urgently need to reinstall Windows, let alone a recovery disk that can bring a dying operating system back to life. Let's look at how to create and burn bootable (installation) media for different cases.

How to create a boot disk for Windows 7

To create a disk or flash drive to boot the system, you need to have with you what you will need directly during the work process:

  • the media itself (disk or flash drive);
  • utility for working with disk images;
  • disk image or Windows 7 system files to create it.

Nothing else is required from the user. To begin with, let's get acquainted with the first, preliminary part of creating a boot disk - building an ISO image for its subsequent recording to media.

Creating and Burning an ISO Disc Image

Creating a boot disk assumes that the user has an ISO image that will be burned to the media. A disk image is a file that represents full copy the entire contents of the disk with software and is widely used in creating bootable disks and flash drives. If the image is not available, you can create it yourself without experiencing any problems: only for this... you will need an existing installation disk with Windows 7 or copied to separate folder system installer files. If you have any of this, you can safely start creating an image for a new boot disk.

ISO is the most popular format image, and it is with this that most utilities for creating and recording images work. You can also create a recording file using standard OS tools, but there is no data on the quality of such recording on systems younger than Windows 7. That's why third party programs recommended to use in any case.

Ashampoo Burning Studio Free

This is a free, lightweight utility for working with disks, characterized by ease of use and a laconic interface, as well as the absence of advertising and built-in malware programs. In it you can not only write files to a disk or flash drive, but also create an image in two ways to choose from: with physical media(CD or DVD that is previously inserted into the drive) and from a folder with files located on the computer.

Working with this utility is very simple: an ISO image is created in just a few clicks.

Download Ashampoo Burning Studio Free is available on the official website.

CDBurner XP

This program is also free, very easy to use and is considered one of the best utilities of its kind. It is adapted for older versions of Windows, but it also works great in new ones (unless the antediluvian interface confuses you). Just like the previous one, the program can create disk images from CDs, DVDs and user files, and also write them down.


The utility is available for download on the manufacturer's website.

Ultra ISO

The most famous and widespread program that is usually used to create and burn discs is UltraISO. A wide range of functions makes this program universal tool to create and record images, so it is recommended to use it. We'll come back to this program when we move on to burning a disc, but for now we'll look at creating an image in it.


UltraISO is not a free program, but on the official website you can download its trial version, which you can use for free for some time.

Video: creating an image in UltraISO

Creating an image manually

If you don't want to bother with programs (please note that when registering for installation flash drive you still have to), then Windows has something for you good news: you can create a disk image via the console, regular means Windows. To do this, however, you still have to download utilities: this time official tools from Microsoft that work from the console.

However, there is nothing particularly difficult about this.

  1. First you need to place the files to be written to disk in a separate folder and save it in a convenient location, for example, C:\Win7ISO. Why convenient? Because the shorter the path to the file, the easier it is to register it in the console.
  2. Then you need to download from the Microsoft website a set of utilities that will be needed when creating the image. The utilities need to be unpacked and installed.
  3. After installing the utilities, you need to open the command line as an administrator (press the Win + X key combination and select “Command Prompt (Administrator)” in the menu that opens) and enter the following code in it:

  4. oscdimg -n -m -b»C:\Win7ISO\boot\ etfsboot.com» C:\Win7ISO C:\Win7ISO\Win7.iso

    Dmitriy

    remontka.pro

The console will begin creating the ISO image, and all you have to do is wait for the build to finish. After this, the newly created image will be available in the path you specified.

Burning an image to a disk or flash drive

When boot image created, all that remains is to move on to the most important thing - writing it to disk. This can be done using Windows tools, and through special programs, some of which have already been discussed above. Programs are a simpler and more popular option, but we will look at both methods.

Burning an image to UltraISO

We will show the software recording method using UltraISO as an example, since this program is the most convenient and popular among users. However, you can use any other utility for this: general principle their work is similar.


Video: how to burn an image to UltraISO

Manual recording

This option is suitable for people who use new Windows versions(7, 8, 8.1, 10): they have the best implementation of disc recording. In the case of a flash drive, everything is a little more complicated: the instructions will only work for computers with UEFI. If you don't have UEFI, you will have to use programs.

If the system being installed is Windows 7 x32, then this method will also not work.

Let's start by burning the disc. Everything here is extremely simple: you just need to right-click on the image and select the “Burn disk image” option. Of course, you first need to check that the disk is inserted into the drive and there is enough space on it to record the image.

To manually burn a disk image, just right-click on it and select the appropriate item

But with a flash drive everything is a little different. To record it, you will need a command line opened as administrator (how to do this is indicated above).

At the command line, enter the following commands in order:

  • diskpart
  • list disk
  • select disk N (here N is the disk number under which your flash drive is displayed)
  • clean
  • create partition primary
  • format fs=fat32 quick
  • active
  • assign
  • list volume

Ready! The flash drive is formatted as bootable, then you need to copy files to it. It's done like this.


Creating a multiboot disk

To create a multiboot disk (that is, a disk on which not one OS is installed, but several, and in addition more programs), you will need slightly different software.

The best choice for today - free program Sardu, which in addition also provides a choice of many images that it downloads itself.

The program interface is quite complex, so some explanations would be helpful.


In the main menu of the Sardu program, you can select images and write them either to a flash drive or to a disk
  • antiviruses;
  • utilities;
  • Linux distributions;
  • different versions of Windows;
  • other (allows you to upload your own images, but is only available in paid version Pro).

On the right are the buttons used to record.


Creating a system repair installation disc

To create a system repair disk (this is the one with which Windows 7 can be restored if it fails), you need the disk itself - that's all.


Creating a recovery flash drive is somewhat more complicated.

  1. In this case, you should create a system image (in the same window where the recovery disk is, there is the “Create a system image” item.
  2. When the system collects and writes the image, you will need to write it to a flash drive using one of the methods discussed above. A little longer, but more convenient: a flash drive is more reliable than a disk. The only negative: the system image for recovery weighs quite a lot, so it is recommended to use a large flash drive or a removable hard drive.

Reliable media - very important point in the matter of “treatment” or installation of any system. Make sure to burn properly and don't neglect recovery discs: you never know when you'll need to reinstall or roll back Windows. And specialized software they will help you with this.


2024 gtavrl.ru.