Connect the rear view camera to the car radio. How to connect the device correctly, connection diagram

Today, a car is considered not a sign of luxury, but an ordinary means of transportation. If previously not everyone could afford such a toy, now almost all families have an iron friend in the garage or parking lot. If just ten years ago the music playing in the car showed the status of its owner, now this will not surprise anyone. After all modern technologies don't stand still. Every year they become more and more improved. Motorists just have to keep an eye on them. So, now an on-board computer or a rear view camera are very convenient devices that not only make life easier for motorists, but also reduce the risk of emergency situations and traffic accidents. A rear view camera (you can read how to connect it to the radio in this article) is a very convenient and practical device.

Installation locations

The rear security camera is a great device that helps any driver to perform quick and safe rear parking.

This product can be installed in many places on the car. For example, in the mirror or wherever your soul desires. However, everything is not so simple here. Be sure to keep in mind that to install such a camera you will need a special adapter or wireless module. However, do not forget that all signals will be transmitted with a slight delay - a few seconds. However, in the real world, even this can cost lives. Also the presence in the car of another additional gadget will focus your attention on it and distract you from safely driving a vehicle.

A rear view camera (you can find out how to connect it to a radio in this article) is most effective and comfortable if it is connected to a car radio.

It is best to entrust the connection procedure to an experienced technician. Carrying out such an operation does not take much time and is relatively inexpensive. However, if you really want to, you can do it yourself. The main thing before this is to carefully read the instructions and arm yourself with the necessary knowledge and tools.

Carrying out preparatory work

The rear view camera (many drivers are interested in how to connect it to the radio themselves) is quite easy to install. The main thing is to understand the general principles.

Before connecting the unit to the radio itself, you need to install the camera correctly. The first thing you need to do is disconnect the positive terminal on the battery. This action is taken for safety reasons, in order to be able to avoid short circuit, which can subsequently lead to a fire in the car wiring itself. If you don't want to do this, you can simply disconnect the entire battery.

Trunk inspection

The rear view camera (how to connect to the radio is clearly described in this article, which means any driver can try to do it on their own) has wiring, so it is very important to decide where you will lay it. Open the trunk and choose the best place for it. It is best to run the wires along the already laid wiring. But it’s best to attach the camera eye above the license plate or directly to the bumper. Experts advise not to install a camera on the rear window inside the car. In this case, the picture will turn out very unclear.

Please note that you will have to worry about wires in the front part of the cabin. Therefore, disassemble several panels in order to gain access to the car's electrical wiring.

Under what conditions will the device work?

Please note that connecting the rear view camera to the radio has certain nuances. Keep in mind that the device will only receive power if you return it. The rear view camera differs from the recorder camera in the length of its working time. If the second device can work continuously, then the first one can work for a maximum hour. After this it will turn off. In principle, this is logical. After all, the main purpose of purchasing such a device is to create simplified conditions for parking, and not for full-fledged driving.

You have every chance to organize a wonderful tandem radio and rear view camera. But before that, make sure that your car radio is equipped with a special LCD screen. After you have completed all the preparatory operations, you can safely begin the connection process itself.

Tools required for work

In order to connect a rear view camera (Chinese radio or any other), you need to prepare some tools in advance. Namely:

• scotch tape or insulating tape;
• screwdriver;
• glue or sealant;
• keys and screwdrivers;
• fuse 0.5 A;
• Sometimes a soldering iron comes to the rescue.

First stage of installation

In order to connect a rear view camera to the Pioneer radio, you first need to install the observation peephole itself. This is done the same for all cars. In modern cars, “seats” are specially equipped for these purposes. If you find such a hole in your car, then it will be enough to remove the pre-installed plastic plug from it and insert the video sensor you purchased.

If your iron friend does not have such a hole, do not be upset. You can do it yourself. An electric drill or drill will come to your aid.

After you drill the appropriate hole in the car bumper, insert the camera “eye” into it, securing it with glue or sealant.

Now you need to correctly route the wires from the video camera itself into the trunk. At the same time, take the black wire and stretch it to the ground of the car. This is very easy to do with just a regular bolt. The positive red wire must be powered from the cable belonging to the rear light. And under no circumstances forget to connect the yellow wire to the camera itself.

When connecting the camera to the rear light, do not forget to use the fuse prepared in advance.

The process of connecting to the radio

After all the work with the peephole itself is completed, you can try to connect the rear view camera to the Pioneer radio. Continue to pull the cable from the trunk into the passenger compartment, securing it with tape or tape. Try to carry out this action in such a way that the yellow wire does not get pinched anywhere and does not get caught in the fasteners. Usually, a maximum of three to five meters of material is enough to complete all work with cables; a diagram will help you do the job correctly. Connecting a rear view camera to the radio will be much easier with its help.

Checking and setting

After completing all the work, you can connect the car battery and start the car. Now engage reverse gear. If a certain image appears on the screen, it means that you have completed all the work absolutely correctly. If not, then experts recommend doing the following:

• go to the radio settings;

• select the “Camera” section;
• adjust all its parameters.

That's all. The installation process is complete, which means you can enjoy the work you did in vain.

You can often hear the question of how to connect a rear view camera to the radio. This is due to the increased demands of motorists for comfort. And also, with some features of modern car bodies. In pursuit of improved aerodynamics, car design is becoming more and more streamlined. Which does not have a very good effect on the driver’s visibility; it has become especially difficult to move in reverse. Therefore, many manufacturers provide for the installation of rear view cameras on their cars.

This allows you to park safely in almost any conditions. True, not all cars have these cameras. But it's not scary. Even a less experienced car enthusiast can carry out such modifications with his own hands.

Equipment selection

How to connect a rear view camera to the radio? Before answering this question, you need to make sure that this is possible for your radio. Normally, such a system will only function in combination with radios equipped with an LCD screen. If you don't have one, you'll have to go to the store to get one. When choosing, be sure to check whether it is possible to connect a camera to it.

Sometimes sold ready-made kits: radio+camera. But often this is far from the best choice. The quality of such kits leaves much to be desired. Its prices are much higher. You can pick up a radio and a rear view camera for quite reasonable money.

When choosing a camera, be guided by customer reviews and price. It is advisable to read on the Internet about all the features specific model. Don't discount sellers' recommendations. Sometimes you come across very smart guys there. Not worth buying front camera, she will not be able to work as she should. Consider connection options. There are cameras with wired and wireless connections.

Preparing the car

Many modern cars have a special recess for the rear view camera. This is the easiest option to install. In all other cases, you will have to tinker with preparing the place to install the camera. There are 3 installation options most commonly used:

• In place of the license plate light;
• Bumper insert;
• Insert into the trunk lid.

The first option is quite simple. But, at the same time, the illumination of the number is reduced, which can cause problems with traffic police inspectors. Installing a camera in the bumper takes more time, but this arrangement is more effective.

To install the camera, you need to cut a hole in the bumper large enough to accommodate the “eye.” This device is most often fastened with self-tapping screws. Sometimes the camera manufacturer provides a different mounting method. This should be checked when purchasing a camera.

Installing a camera in the trunk lid is a little more difficult. It is important not only to cut the hole. But also do it as carefully as possible. At the same time, do not forget to treat its edges with anti-corrosion substances, which will help avoid problems in the future. There are several advantages to this setup. One of them is a larger viewing angle, which allows you to control the backward movement more efficiently and reliably. Also the camera location is more high level allows it to remain clean longer, which makes it reliable in conditions of autumn and spring thaw.

Connection

Many car enthusiasts make the mistake of posing on camera. constant food. This leads to rapid failure of this device, which is not designed for uninterrupted operation. That's why, optimal solution will be connected to the reversing light. In this case, when you engage reverse gear, the camera will turn on and display the image on the radio screen. When switching modes, it will turn off automatically. All this happens in automatic mode without driver participation.

Cameras can be connected both using wires and without them. Let's look at the features wireless cameras. They have a transmitter that transmits a signal to a receiver located near the radio and connected to it. The only difference between this type of camera is the absence of wires running throughout the cabin.

Connect the camera as follows:

• First you need to connect the device to the rear light. To do this, you need to take the black (minus) wire and the red (plus) wire and connect them to the corresponding terminals of the flashlight. The easiest way is to insert into the wires going to the terminals. Just remember to properly insulate the connection;
• For wired cameras, extend the yellow wire and stretch it around the cabin. This is usually done around the cabin, but some craftsmen simply add it to the standard harness. On wireless versions a transmitter is connected to it;
• Connection to the radio is via the video in output. In general, the work of connecting the rear view camera to the radio is complete.

As you can see, there is nothing particularly difficult in this work. Be careful when connecting the camera to a power source. It is extremely important not to confuse the polarity here. Otherwise, you may burn the purchased equipment. And if at that time you also have a radio connected, then it is likely that it will also fail.

Settings

Connecting a camera is not too difficult. But, for its normal operation, it is still necessary to perform additional settings. Before setting up the camera, turn on the ignition so that voltage is applied to it. The setup is done as follows:

• Turn on the radio in “settings” mode, then find the camera section and go into it;
• Select “rear” from the list;
• Use the buttons and joystick to adjust the focus to suit your needs.
• This completes the installation and configuration of the rear view camera.

Front-camera. Besides rear camera You can also install the front one. For greater effect It is advisable to purchase a front camera with a wide viewing angle. Then she will help you out not only in the parking lot. Due to the location and great review, you will be able to safely drive onto the road due to any obstructions.

For normal use of two cameras at the same time, you need to purchase a radio with 3 video outputs. There are plenty of these on store shelves now.

Conclusion. Parking sensors are not always able to provide safe parking. Therefore, many drivers are interested in how to connect a rear view camera to the radio. This device allows you to assess everything that is happening behind you and quickly respond to changes in the situation. This minimizes the risk of damage to the vehicle.

(KZV), the driver will be able to know how to park and what obstacles may prevent him from doing so. You won’t surprise anyone with such a device today, Lately More and more motorists are equipping KZV cars. From this material you can learn how to make a car radio and what you need to know about choosing devices.

[Hide]

Criterias of choice

If you decide to purchase a rear view camera, you may encounter a wide range of devices on the market. Many brands are engaged in the production of KZV, as a result, products differ not only in manufacturer and cost, but also in functionality, as well as configuration. Depending on your preferences and capabilities, you can purchase full set device (camera with display), either or another.

General criteria for choosing a device:

1. Type. KZV can be either wired or wireless. In the latter case, it is necessary to organize a point Wi-Fi access in the car.
2. Viewing angle - this parameter largely determines the quality of image coverage. It is optimal to choose devices with a coverage angle of 120 to 170 degrees.
3. The quality of the image, a lot depends on it.
4. Device body. It is important that it is strong.

How to determine the location of the camera?

Before connecting the camera, you need to select a location to mount the device. The KZV can be installed in the trunk lid, license plate frame or rear bumper. This installation location will not spoil exterior design vehicle, this is best option in terms of height, the required image will be displayed on the monitor.

Depending on the type, the KZV can be mounted instead of the license plate illumination, and the device is equipped with a backlight option. But its quality is much worse. The main criterion that you should rely on when choosing where to install the system is how much the camera will become dirty. On many vehicles due to aerodynamics rear end The bumper may become covered with dirt in bad weather.

Installation from A to Z

How should the KZV be installed and connected? If you want the radio with a rear view camera to work for a long time, follow the recommendations below. For installation you will need a diagram, which should come with the kit.

Installation process

1. Remember that all electrical work is carried out with the on-board power supply de-energized. Therefore, it is necessary to disconnect the battery.
2. First, the camera is installed, in particular the peephole, depending on design features Auto space may be provided for this element. If it is, then you only need to dismantle the plug and install the peephole there. If there is no space, then you need to drill a hole in the bumper and fix the peephole in it using silicone or glue.
3. Then the wiring from the device is laid in the luggage compartment, the negative terminal should be connected to the ground of the car, for this you can use a regular bolt. The positive terminal is connected to the optics wire, which turns on when reverse gear is activated.

Camera to display connection diagram car radio

Connection to radio

1. In order for the image to be displayed on the car radio monitor when turned on, you need to lay the yellow wire through the interior and secure it with electrical tape. Make sure that the cable is not kinked or affected by moving body parts, otherwise it will have to be replaced soon. If the length of the wire is not enough for installation, you can try to increase its size using a similar cable.
2. Then the wire needs to be connected to the audio system; for this you need to read the instructions for the radio. The connection principle is identical in almost all systems. The end of the yellow wire, the so-called tulip, must be connected to the Video In connector.
3. If you use a wireless version of the camera, the principle of connecting the system will be identical. Instead of one end of the wire, you need to install a special sensor in the Video In connector, which is included with the KZV. Actually, when these actions are completed, the installation procedure of the short circuit protection device can be considered completed. But before assembling the upholstery and preparing the car for operation, it is necessary to diagnose the operability of the system.

Checking and setting up the camera

To make sure that everything was done correctly and that the KZV type works in normal mode, you need to check the functionality of the device. To do this, connect the battery, start the car engine and put the car in reverse gear. At this moment, a picture should appear on the display of the radio - if this is the case, then everything is installed and connected correctly.

If the image is missing or poorly displayed on the display, do the following:

1. Go to the car radio menu and select “Settings” or “Settings”.
2. Then go to the “Cameras” or “Cameras” submenu, depending on whether the audio system is Russified or not.
3. Then you need to find your camera in the available list.
4. Using the settings, adjust the focus and other settings of the KZV eye.

By following these steps, you can customize the system to suit your needs.

Price issue

As for the cost, most depend on the manufacturer. KZV can be wired or wireless, a lot depends on this too. The price is set not only for the brand and type, but also for functional features, as well as the quality of the device. On average, the cost of KZV on the market is as follows:

Video “Example of connecting KZV to a car radio in Cherry Tiggo”

Not so long ago, a car was considered only an ordinary means of transportation. But now it has become a kind of indicator of well-being. Manufacturers are trying to equip cars the latest technologies, make it more comfortable and enjoyable to use, and achieve improved aerodynamic performance. But in the pursuit of prestige, sometimes a factor such as visibility of the car is missed. Installing parking sensors did not give the expected results.

Parking sensors sometimes show incorrect data or cannot detect some obstacles. This increases the risk of damaging your vehicle when trying to park. To feel more confident when reversing and maneuvering in tight spaces, you can install a rear view camera. Attached to the rear of the car, it transmits images to a monitor mounted on the instrument panel. But if the car does not have such a useful addition, then you can connect the reverse camera yourself to the standard radio.

Selecting a video camera

Modern manufacturers offer motorists a wide range of rear and front view cameras. Devices differ in cost, quality and technical specifications. So that the car owner can independently connect the device, it comes with detailed instructions, diagram and special installation kit.

To choose the most suitable option for yourself, you can follow these recommendations:

1. When choosing a video camera, you need to pay attention Special attention on its shape, since the subsequent installation procedure will depend on this. Some models are sold with special brackets, while others are designed to be embedded in the trunk lid or bumper.
2. After choosing the shape of the device, you need to decide on the desired viewing angle. It should be noted that if the direction of the video sensor is too strong, many unnecessary objects may fall into the field of view. And this makes it difficult to focus and has a Negative influence on the driver's reaction time. An excessively small viewing angle is also undesirable, since it does not make it possible to give a full assessment of everything that is happening behind the car.
3. When purchasing a device, you need to keep in mind that the rear camera cannot be used as a front camera.
4. In addition, car enthusiasts can buy full set, consisting of a video camera and monitor. These kits often contain detailed instructions and diagrams that will allow the car owner to quickly and easily connect all devices. But you can only purchase a video camera and connect it to the standard radio.

Where should I install the video camera?

The rear view camera is installed either in the trunk lid or in the rear bumper. This place doesn't spoil at all appearance car and at the same time be at a sufficient height to remove all necessary information to the monitor. However, some drivers prefer to attach a video camera to the trunk handle, one of the headlights, or to the license plate frame.

Here you should be guided by personal preferences and technical features car. But you should not install a rear view camera behind the car window. In this case, the image on the screen will become unclear due to glare. In addition, the lower border will not be visible enough. The front view camera is most often attached to the car emblem.

Required tools and materials

To connect the camera to the standard radio, you need to prepare the following materials and tools in advance:

• tape or insulating tape.
• special glue.
• set of keys and screwdrivers.
• electrical wires.
• soldering iron, solder and acid.
• electric drill or screwdriver.

It is worth noting that in each car model, the process of installing a video camera may differ significantly. Therefore, in some cases additional items may be required. To connect, you will also need a standard radio with a high-quality monitor.

Work order

To connect the camera to the radio, first of all, you need to study the instructions, diagrams and photos provided by the manufacturer.

1. The connection begins with installing the camera eye. If the manufacturer provides special mounting areas for sensors, then the plastic plugs must be removed. And then the device is inserted into the resulting hole. If there are no special seats, then make a hole of the appropriate size using an electric drill. Then the video camera eye is glued using sealant or glue.
2. After this, you need to pull the wires that come from the device into the luggage compartment. First, connect the negative wire (black) to the vehicle ground. Almost any bolt can be used for this purpose. The positive wire (usually red) is then connected to the reverse light cable. In this case, power can only be supplied to the camera when reverse gear is engaged.
3. Video cable ( yellow color) is pulled through the car interior and connected to the radio. And in order not to accidentally damage the wire, it can be attached using adhesive tape or insulating tape. Then you need to connect this cable to the monitor input and video camera output. The camera input is located on the rear panel of the music device. A pioneer radios have two special inputs, which allows you to additionally connect a front camera.
4. Now all that remains is to connect the monitor to the mains and attach it to dashboard. This can be done using self-tapping screws or regular double-sided tape.
5. After completing all work, be sure to check the operation of the device in all modes.

Connecting a rear view camera to the radio does not require much time and effort. In addition, by doing the work yourself, you can save some money. And in order to do everything correctly, you can watch a video tutorial, where, using the example of a pioneer radio, the stages of the work are shown in detail.

Previously, few people could boast of having a car, but today almost everyone has it convenient tool movement. The promotion of technological progress is only beneficial for car enthusiasts. On-board computers, radios with rear view cameras and parking sensors no longer seem like a curiosity. These devices have become an integral part of our lives, but they are not always included in the basic configuration of the car. Let's look at how to connect a rear view camera to the radio to improve the convenience of driving your car.

Rear camera

This device has no equal if you need any kind of parking assistance. Very often it is mounted slightly above the car number plate and displays the image on the screen into the cabin. The monitor itself is mounted in a mirror or is independent.

Important! The latter case may cause a number of the following inconveniences: you will need a wireless transmitter or a special adapter, and the availability extra device in the cabin it will only catch your eye.

Most car enthusiasts prefer to connect the camera directly to the car radio. But how to connect a rear view camera to the radio? The installation procedure itself is not particularly complicated and can be done with your own hands. But if you have any doubts, then use the services of qualified specialists from the service. If you are determined to do this business yourself, then you need to prepare well.

Preparation stage

First you will need to install the camera itself. That's why:

• Disconnect the positive terminal on the car's battery or simply disconnect the entire battery.

Important! If your car model must have constant access to electric current, it is better to entrust the work to specialists. Otherwise, the car will be locked, and to unlock it you will have to pay a considerable amount at the service center.

• Now take a look at the trunk and figure out where exactly the wiring of the device will go. Most often, conductors pull along their own kind.
• The video device is mounted on the bumper or immediately above the license plate - you will also have to decide here.
• Now remove several panels from the front of your car.
• Disassemble the dashboard and tidy to give yourself access to the electrical wiring.

• Apply power from the reversing light. It is necessary to do this so that the device is activated when reversing.
• Make sure your radio is ready to work with your new device. To do this, it will not interfere with the LCD monitor on the panel.

How to connect a rear view camera to the radio yourself? Before answering this question, you need to install the gadget on the car body.

Installation

Almost everything existing devices records are connected according to exactly the same principle. Therefore, get the following things:

• Screwdriver.
• Half amp fuse.
• For some cases, a soldering iron may be needed.
• Set of keys and screwdrivers.
• High-quality sealant or glue.
• Electrical tape or good old duct tape.

Operating procedure:

1. First you need to mount the camera itself. It turns out that some vehicles equipped with basic seats for such devices. If your car has such an innovation, then you just need to pull out the plastic plug from this place and place the video devices in its place. Without a seat, you will have to take a drill or an electric drill, which will help you make the desired hole in the car bumper. If you have managed this, then you can safely install the “eye” there and fix its position with sealant or good glue.
2. Now you need to stretch the camera wires inside the trunk and connect the negative wire to the car body. Plus you need to power it from the taillight using a power cable. And don't forget to connect one end of the yellowish wire to the camera itself.

Important! When the camera is powered, use a half-amp fuse prepared in advance.

What does the rear view camera connection diagram look like? And what to do next? It's time to get busy with the tape recorder!

Connection to radio

Find the yellow tulip plug, take it in your hands and stretch it across the entire interior, carefully securing it with electrical tape or tape.

Important! Avoid cases where the wire gets pinched or gets caught in the fastening elements. The length of such a cable usually varies within four meters. And this is quite enough to install it in the most invisible way even in a huge SUV. The lack of cable length can be compensated by using another cable of the same type.

Now we connect the cable and the radio. Here you will need knowledge from the instructions that should come with it. Most often, such devices have the same principle, but sometimes the configurations differ. The document will also clearly show you the port specifications, markings and other useful things.

Marking of the required connectors:

• Most often, it is enough to connect the second end of the tulip wire to the connector called “Video in”.
• Most radio tape recorders have an additional wire that allows you to activate the radio itself to display the picture that is sent to the monitor from the video device. Such a wire is called “Back”, in rare cases - “Reverse”. Just apply +12 volts to this wire. That is why image output devices are supplied with a specialized wire required for power supply. One end of such a wire must be connected together with the +12 V end to the power supply from the reverse lights, and the other end to the second wire of the radio.
• If you become the happy owner of a camera that does not require wires, then follow the same principle that you learned today. There will be only one difference - it is not a tulip, but a special transmitter that needs to be connected to the “Video in” connector.

Now you know how to connect a rear view camera to the radio. All that remains is to check the whole thing for functionality.

Checking and setting up

Return the battery terminal to its place and start the car by engaging reverse gear. If you see anything on the car radio, it means you’re doing great, everything was done conscientiously. If the picture is missing for any reason or does not look the best in the best possible way, then try the following.