Connections d link 300. Setting up a network connection and logging into the router control panel

Hello, in this article we will talk about the setup and capabilities of WiFi on a router from d-link company model dir 300.

Input d-link dir 300

I described in detail about connecting and logging into the D-link dir 300 router in the article “Connecting d-link dir 300”. Now we’ll just go to the router configuration interface.

Open any browser and address bar we write 192.168.0.1 (this is ). Then enter the Username - admin, Password - admin.

The main page will open in front of you. Let's go straight from there to advanced settings.

Enabling/Disabling WiFi on dir300

First, let's check if WiFi is turned on on your router. To do this, we need to find the “WiFi” column. There will be a switch in the upper right corner, moving it from the green position to the red, we will turn off WiFi, if it is in the green position - this means that WiFi is on.

You can also enable or disable WiFi on 300 by going to “ General settings" If we check the box next to “Enable wireless connection,” Wi-Fi will turn on; if we uncheck the box, we’ll turn it off.

Setting the Wireless Network Name

Now let's move on to the most interesting part, the immediate at a construction siteWiFi on the d-link dir 300 router. Let's set the name of our network, this is the name that will be displayed in the list available connections. Go to “Basic Settings” and enter a name in the “SSID” field. Then click on the “Change” button.

Let's set or change the password on the D-link Dir 300 WiFi router.

Now let's protect our WiFi network by setting a password. To do this, we will follow the “Security Settings” link, which is located in the WiFi column on the advanced settings page. Here we are interested in the “Network Authentication” fields, select WAP2-PSK from the list. And in the “PSK encryption key” field we will set a password. The password must contain at least 8 characters and consist of Latin letters, numbers can also be used.

How to find out who is connected to my WiFi

The D-link Dir 300 router allows you to track connected users, allowing you to check how many devices are connected to your WiFi. To view the list of connected devices, go to the “Advanced settings” page. And in the “WiFi” column, click on the double arrow to the right.

A continuation of the list of the WiFi column will appear; in it, select the “WPS Station List” item.

Now you will see a page with a list of connected wireless connection to your router.

Also, you can disconnect the connection from any of the devices. To do this, you need to check the box next to the “poppy” address and click on the “disconnect” button.

Blocking devices by MAC address.

Another one of useful functions in the Dlink router - blocking devices by a unique address (MAC address). To block devices you need to follow the “MAC filter” link in the WiFi column.

The “Filter Mode” page will open in front of you, with one field “MAC Filter Restriction Mode”. There are three selection options in this field, let's look at them individually:

• Disabled – is the default and means that filtering by poppy address is not performed.
• Allow – this setting means that only those devices that you add to the list will have access to the router via Wi-Fi.
• Deny – devices that will be added to the list will not have access to the router.

After selecting the mode, you need to click on the “Change” button.

Most convenient way compiling a list means selecting them from a list of already connected devices. In the “Known IP/MAC addresses:” field, select the device you want to block.

If the device is not yet connected to the router, then you can add it manually. Click on the “Add” button and enter the MAC address of the device in the field that appears.

Once the list is completed, click on the “Save” button.

To remove a device’s MAC address from the list, you need to check the box next to it and click on the “Save” button.

Saving router configuration data

When setting up the Dlink Dir 300 router, you will notice that after each action a red circle with a number inside appears in the upper right corner. This means that the router is asking you to save your settings changes. This is necessary so that if the router is disconnected from the power supply, all the settings that you have made will be saved.

Hover your mouse over the flashing light and click on the “Save” link. It is not necessary to perform this operation after every change of settings. You can do this at the very end, when you are about to exit the router setup interface.

Video: Detailed instructions for setting up Wi Fi

.

Setting up the Internet for a specific provider using firmware

Almost all Russian Internet providers provide ready-made firmware for configuring wireless routers on their official websites. In the list of devices you can easily find the D-Link DIR 300, the characteristics of which allow you to fine tuning for any provider. In most cases, on the Internet service provider’s website you can download both the firmware itself and the program for installing it. In addition to the set of files, it is always offered step-by-step instruction. So with automatic tuning there won't be any problems.

Problems may arise with provider firmware if the settings are hidden by the developer password. The user will not have the opportunity to go into the settings and manually specify the parameters for Wi-Fi. Therefore, before flashing the device, you need to check with company representatives about such blocking. Even if the router was flashed due to negligence, it can always be revived using recovery firmware from the official D-Link website.

Wi-Fi Settings

In the control menu of the D-Link DIR 300 wireless point, settings WiFi connections have a separate section with many items.

1. MBSSID allows you to create several different Wi-Fi networks. It will be useful somewhere in the office to give Internet access only to the bosses, but at home this function is not used.
2. It is recommended to enter in the SSID field with Latin letters proper name For wireless network.
3. You can set any wireless mode, depending on your capabilities. wireless devices. If the laptop only works in 802.11G mode, then there is no point in installing a more powerful one.
4. In the security settings, in the “network authentication” field, it is recommended to select WPA-PSK/WPA2-PSK mixed. Firstly, this connection does not require a RADIUS server, and secondly, a password with letters and numbers is harder to crack.
5. You need to select AES for encryption and enter a password for the Wi-Fi network. This completes the setup, you can save the changes and enjoy the Internet via a wireless network.

Hardware connection to WiFi network

Settings WiFi distribution in the D-Link DIR 300 wireless access point can be carried out not only on program level with making settings through a special menu. On one of the side panels of the device you can see a huge button labeled WPS. Thanks to it, you can quickly hardware connection with a device that supports this technology. It is enough, for example, on your tablet to select a connection to the wireless Internet network via WPS and in the list of wireless points that appears, select the necessary network. To complete the connection to D-Link device you need to press and hold the hardware button for about 2-3 seconds to connect the device via Wi-Fi. The devices will connect without entering a password, which is very convenient when you don’t want to share the password from personal network to your guests.

However, before you can use this amazing feature, you need to enable it in your router. To do this, you need to find the WPS item in the access point management menu and go to it. After checking the box next to “enable WPS” and saving, the function will be available for use. IT savvy users can try to create an additional Wi-Fi network with disabilities, For example. Purely for guests who urgently need the Internet, but so that their connection does not interfere with the owner’s current downloads.

Setting up network television

Many users will like the IPTV performance characteristics of the D-Link DIR 300 router. Minimum settings and maximum pleasure from watching high-quality digital video. When entering the menu IPTV settings The wizard prompts you to select the port number in the wireless access point to which the TV set-top box will be connected. The main thing is to remember the selected number and always connect digital television only there. In the Miscellaneous section, it is recommended to enable IGMP, NAT and firewall. It is better not to touch other fields. Naturally, you need to click the “Save” button, and you can safely start watching the video high definition on the computer screen. The provider providing the IPTV service must provide the player for viewing, the server address and the list of channels.

Advantages of the D-Link DIR 300 router

Judging by numerous reviews from owners, the advantages of wireless router can't be counted. This is true, otherwise where would so many positive reviews come from?

1. As mentioned earlier, the main factor when purchasing is price. The device is affordable for any user.
2. Availability of a four-port switch to which you can connect personal computers And network printer, For example.
3. Opportunity IPTV viewing on multiple devices, both via WiFi and local network.
4. Very convenient in D-Link DIR 300 WiFi setup. The menu items have a description, and any user can independently launch their own wireless network in a few minutes.

There are also disadvantages to a wireless device

We hear from users that the D-Link DIR 300 “crashes” during operation - that is, it spontaneously reboots or freezes for an indefinite period of time. After studying the information on specialized forums, you can find that the problem is known to specialists and can be solved by replacing the firmware. Freezing can occur due to the user's fault if files are downloaded over a wireless network by several devices with a total speed equal to the Internet channel width. For all owners of D-Link DIR 300, it is recommended to limit the speed of downloading files, primarily for torrents, by 5-10% of the maximum channel width. The recommendation only applies to devices that access the Internet via a wireless network. Working with the cable has no disadvantages. The negative side includes complaints about the small coverage radius. The router has neither an amplifier nor an antenna output. Although for the price that the access point has, it’s not worth demanding good coverage from it.

Conclusion

Having decided to purchase an inexpensive router, you should pay attention to the D-Link DIR 300. Setting up WiFi, local network, digital television and security will not take much time. Not all providers provide open access to the Internet. Many people use individual settings, with which selected routers can be friends. These include the most popular in Russia wireless point access from the well-known manufacturer of communication equipment D-Link DIR 300.

When connecting to the Internet, the router plays a key role. Although you can connect without it, connecting through a router is easier and more convenient because:

• No need to keep your computer on all the time - for a smartphone, tablet, Smart TV, etc. connection occurs through a router;
• Installed firewall between your home network and the provider’s local network - the provider’s clients will not be able to “easily” connect to your machine;
• The router comes with a quick connection program.

DIR -300 CD Ethernet cable Power adapter

If something is missing, contact the seller.

LAN ports 1-4 are used for wired connection devices. Internet - input for connecting to the Internet provider server. Next is the power adapter connection socket. The extreme RESET button is used to reset all settings to factory settings.

We follow the general steps for all types of connection:

1. We install the modem (it is not advisable to place the router in a closet, attic, etc.).
2. Connect one end Ethernet cable to the computer's Ethernet port. We connect the other end of the cable to one of the LAN ports (any) of the router.
3. We connect the RJ-45 Internet patch cord to the WAN port of the modem.
4. We connect the modem via the power adapter and wait about 30 seconds. until it loads.
5. Turn on the computer.
6. The LAN, WAN and power LEDs should be lit. If not, check the connections.

More detailed information about connections can be found in the article ""

Setting up the router

Before setting up, ask your provider for the type of connection (PPPoE, PPTP, L2TP), type of IP address (static or dynamic), login and password. To configure the router, use the Web interface. To work with it, launch a Web browser and enter the modem’s IP address (192.168.0.1). In field UserName enter admin, field password leave it blank (no password is set by default).

You should be taken to the modem settings page.

Setting up an Internet connection

For manual installation Internet connection settings, select ManualInternetConnectionSetup.

A settings window will open in front of you.

When choosing AccessPointModethe router will operate in bridge mode - NAT turns off and the router turns into a regular access point. You will need to create a connection and set all its settings on your computer. In bridge mode, the router will not be able to be managed. To switch to this mode, check the boxEnableAccessPointMode and click SaveSettings.

We perform the following steps:

1. In section InternetConnectionType in the window MyInternetConnectionis we set the connection protocol - we find out from the provider and select the desired one from the possible list values. For example, PPPoE(DualAccess).

2. In section PPPoE (DualAccess)set the required values.

2.1. Choose Dynamic or Static - We will find out from the provider. Most common dynamic IP address. If you have a static IP, select Static.

2.2. In field UserName enter Login received from the provider.

2.3. In field Passwordenter the one issued by the provider.

2.4. In field RetypePasswordrepeat this password.

2.5. Field ServiceNamecan be left blank, but sometimes you need to fill it out.

2.6. If a static IP address was selected, in the field IP AddressWe indicate the address issued by the provider.

2.7. Clone MACAddressdo not touch unless required by your ISP. Usually there is no binding by MAC address. By default, the router's MAC address is displayed here. When you click onClone MACAddressrouter changes its MAC address to MAC address network adapter computer.

2.8. Fields PrimaryDNSaddress And SecondaryDNSaddressare filled in with a static IP address and indicate the addresses of the main and additional DNS provider servers.

2.9. Field MaximumIdleTimespecifies the time after which the router will terminate the connection if there are no calls.

2.10. In field MTUWe indicate the maximum block packet that can be transmitted without fragmentation. For connection PPPoE over default value optimal size 1492. For PPTP and L2TP the recommended value is 1460.

2.11. Paragraph Connect Modedetermines the connection setup mode. Always on - always on. Connect-on-Demand - Connection on demand - i.e. When packets sent to the Internet appear, the router will establish a connection.Manual—connect and disconnect manually.

2.12. Click the button SaveSettingsto save settings.

Setting up a wireless network

Wireless Wi-Fi network can be configured both in wizard mode and in manual mode.

Click manual mode settings.

Chapter Wi—FiProtectedSetup- Wi-Fi protection (WCN 2.0) - to use, check the box Enable and click the button GenerateNewPIN(generate PIN) or Reset PINtoDefault(Reset PIN).

Chapter Wireless network setting

• – Option Enable Includes wireless access features.
• – Option WirelessNetworkName— Wi-Fi network identifier. Give the network a name using up to 32 characters. For example, NETBYNET-980-25-00. The network ID field is case sensitive.
• – Option Wireless Channel — channel number. The default is channel 6. Any channel can be selected.
• – Field AutoChannelSelection can be used for automatic selection channel router with minimal interference.
• – Option TransmissionRate— in the drop-down menu, select the transfer speed in Mbit/s. Typically, you can use Best (automatic).
• – Field WMMEnable allow t prioritize the stream according to 4 access categories: voice, video, maximum quality and background.
• – EnableHiddenWireless— if you check the box, the wireless network identifier will not be broadcast. In this case, wireless clients need to know the SSID to connect.

Chapter WirelessSecurityMode- choose desired mode security in the drop-down menu. For example, Enable WPA/WPA2Wireless Security(enhanced).

Hello, our dear visitors. Do you want to know how to configure the dir 300 router correctly? On this page, website I decided to tell you what it is setting up D-link DIR 300.

The model of this router is very popular in Russia and neighboring countries, so step by step setting up DIR-300 will definitely help many people set up home network. How to configure dir 300? We will assume that step-by-step correct setting D-link Dir 300 has begun! We are sure you can handle it on your own!

Setting up the DIR-300 router

In fact, in the setting router dir 300 nru there is nothing complicated. But most Dlink DIR300 owners are faced not with the problem of the setup itself, but with a lack of understanding of simple things:

• How to connect D-link DIR 300.
• What data to enter into the router.
• What connection does the provider use?
• How to connect WiFi after setting up a local network.

So, D-link DIR 300 is unpacked. Its kit usually includes instructions for setting up and connecting, but since you are on this page, it’s probably not that clear. Also included with this WiFi router Comes with power supply and patch cord. Let’s say right away that we will show the setup of D-Link dir 300 nru, but since there are several revisions of routers of the 300NRU model:

1. The DIR 300 NRU B7 we are reviewing.
2. DIR 300 NRU B6 - the previous revision of the router, differs in the admin panel interface.
3. DIR 300 NRU B5 is a very old model.

Don't be afraid that you have a different router interface. All settings for NRU are also relevant for other revisions. The main thing is to understand the principle.

By the way, we have already talked about the principle, and we also have an earlier one. Let's return to the D-Link Dir-300 and see what the router has on the back:

As can be seen from the figure, the router has four LAN RJ45 connector, which are needed to connect computers via a network cable, that is, PCs that are not equipped WiFi module. Also, the D-Link DIR 300 has WAN The connector is responsible for receiving an Internet channel from the provider. The round power connector is designed to connect the router using a power supply. This can already be done if you haven’t connected it yet.

After that, connect the patchcord ( network cable, included with the router). One end needs to be plugged into one of the four ports LAN, and the other into the network card of a computer and laptop. To the port WAN We insert the wire from the provider (do this later, the Internet will come in handy later).

As can be seen from the photograph, D-Link connection dir 300 is quite simple. Initial setup router dir 300 is finished. By the way, if for some reason you do not have a patch cord included, then you need to buy it or. Now it's time to go into the D-Link DIR 300 and configure it. Open the browser and type in local address, as written in instructions 192.168.0.1. Admin panels of all routers D-Link available at this address.

We enter the username and password that are set on the router by default. By the way, if for some reason you forget your password, we will change it below at the next D-Link setup dir 300, then restore your login and password by resetting settings dir 300. This can be done with the “Reset” button, which is located on the back of the router. Just keep in mind that all settings on the router will also be reset. Let's return to setting up the DIR300. A warning window will appear indicating that it would be a good idea to change the password, we will do this later.

Finally we got to the router admin panel D-LINK DIR 300!

Updating the firmware before setting up the router

Any modern router has firmware. Router manufacturers are trying to correct errors in the operation of routers, so it is worth updating the firmware of our Dlink DIR-300. To do this, let's check the firmware version at home page administration panels.

Now we need to pick it up new version firmware on the Dlink website. Follow the link ftp://dlink.ru/pub/Router/, find our router model and download the firmware with the file extension FWZ.

The firmware is updated in the admin panel. The update takes a little time. Let's continue.

Preparing to configure on Windows

One of important points In setting up the dir 300 router, and not only this model, is setting up a local network and connecting to the Internet. Moreover, connecting to a local network is easy, but difficulties may arise with the provider’s settings. In Russia, there are at least two large providers:

• Beeline.
• Rostelecom.

And there are countless less visible ones, most of whom are simply intermediaries, renting a channel from a large provider. And their connection settings may differ. There are several types of connection to the provider:

• PPPoE connection.
• PPTP connection.
• L2TP connection.
• IPoE connection.
• Connection via static IP address.
• Automatic receipt IP addresses.

We are sure that many of you were wary - there are so many incomprehensible abbreviations. In fact, those who do not know what type of provider they are connected to need to do a few simple things.

We need to look at the settings in Windows XP let's go:

Start -> Control Panel -> Network connections-> Local Area Connection -> Properties -> Internet Protocol (TCP/IP) -> Properties

IN Windows 7 The settings of the network interface, which is responsible for connecting to the provider, are located:

Start -> Control Panel -> Network and Sharing Center shared access-> Change adapter parameters -> find the interface and go to Properties again twice, as in the picture

We remember what data is indicated there, you can even take a screenshot. After recording the IP, mask, gateway and DNS , you can put dots on “receive automatically”.

Setting up WAN and LAN interfaces on D-Link Dir-300

Let's move on to setting up a local network and Internet access on our DIR-300. Go to the tab:

Network -> Connections

And we'll choose WAN interface. A window will appear, the parameters of which will need to be configured.

This is where knowledge about the type of connection to the provider comes in handy. As you can see, the screenshot shows the settings for IPoE. Your settings may, of course, vary. For example, to change the settings to PPPoE, you need to at least change the connection type:

Let's briefly go over all the characteristics of this page:

• MTU - the value is responsible for maximum size a data packet that is transmitted over a channel via the TCP/IP protocol. Some providers only work with a certain MTU value, but usually it is 1500 and you don’t need to touch it.
• MAC: Unique network interface identifier. Some providers link to MAC address to protect your Internet connection. You can check this with your provider. If a binding exists, you need to find out the MAC address of your network card and hit him in this field.
• Obtaining an IP address automatically also depends on your provider settings. If in network interface Windows, which we talked about above, certain IP, mask and gateway values ​​were entered, then you need to uncheck the box and specify these parameters (remember, we asked you to write them down?)
• Obtaining the DNS server address is the same as with the previous point.

Save the changed WAN interface settings.

About LAN can be said simply. If you want network participants to receive an IP address automatically, then on the DIR-300 you need to leave everything by default, and in Windows check the “receive automatically” checkbox, as we described above. Otherwise, you can make a network by disabling DHCP V LAN, that is, so that the router does not give out the IP automatically. In this case, in the properties of the TCP/IP protocol you will have to specify the IP address, mask and gateway. For example like this:

• IP 192.168.0.2
• Mask 255.255.255.0
• Gateway 192.168.0.1

So, Dir-300 will be able to see your computer. Next we will be setting up WiFi on the D-Link DIR-300, which we will issue as a separate article. We hope this article will help you connect a computer or laptop to the Dlink DIR-300 router. Now let's move on to the second part of our story about this router model and.

• Lera

  Hello, yesterday I installed the D-link dir 620 router, in the evening everything was fine, all 3 laptops used Wi-Fi. But before going to bed, I turned off the router by clicking off and in the morning, when I turned it on, of course, not a single laptop could connect. The router is not listed in the network adapters, although yesterday it was... I didn’t update because I got confused, there are a lot of different files and it’s not clear what to do, what to download and how to set the fwz format. I can no longer access 192.168.0.1. Please help me out.

• Lera

  I turned it off, of course)) first thing. But it didn't help, unfortunately. I think the point is that I didn’t update it, my version is 1.0.0, I already managed to press reset.

• LDemid

• Gleb

• Meow

• RedBull

  My question is this? I connected an internet cable to the router, from the router to the computer. And so first I went to the Internet without changing anything in the IP, and then I wrote what was above 192.168.0.1, etc., and that’s it, I can’t go to the Internet at all, what should I do? And I also connect to Wi-Fi from my phone, it says there’s supposedly an excellent connection and that’s it, but I can’t access the Internet, although Wi-Fi is turned on as the phone says. What should I do?

• birthday boy

  So, I set up the dLina 300 router a long time ago, everything worked. I decided to check how many users were connected. I pressed the reset, trying to get into the settings. Using standard login/password. Piget is not the correct login or password. What is wrong in my actions?

• Prince

  Good afternoon I forgot the password for the router, decided to reset it to factory settings and set it up again, clicked reset and now the laptop does not connect to the Internet and does not /see/ the router at all, even through a cable.

• andy15

  About once a day (from 10 to 11 pm, just when I first set up the router) the connection is lost. You have to turn the router off and on. How to get rid of this?

• Tanya

  Hello. I have dir 300, my laptop still connects, my Nokia phone connects via Wi-Fi, but my Samsung Galaxy won’t connect. Tell me something!!

• semen1234567

  hello =) I can’t figure it out, I found through the “cmd” command the ip mask of the gateway and dns servers, actually the problem is that there are 2 connections: “local network connection” - where ipv4 and the subnet mask are written, but the gateway and dns servers are not indicated and there are 2 it says “ppp adapter high-speed connection” - there is ipv4 (but it differs from 1) gateway mask and 2 dns network IP addresses, what data should I use? Thank you

• Lisa

  Hello, the router provided Wi-Fi for a year, and then the computer stopped seeing it (other devices saw it). When I tried to connect, my Wi-Fi appeared in the list, but the computer could not connect to it. As a result, I rebooted the router (dir300), and the computer sees a network called dir300, which is distributed by my router. When connecting to the router via cable, I go to 192.168.0.1, in the settings I rename the access point, set a password, click save, it hangs for a while, supposedly saves, then in the left top corner“Inaction...” appears and that’s it, it doesn’t save anything, Wi-Fi is still available to everyone. Please help me figure it out!

• Ivan

• Wirral

• boekanur

• Alexander

  Tell me, the router is DIR 300, in the online rooms there are 6 gran turismos, out of 16 participants on the track I see only 6 or 7 people, although they take part in the races, and some people are immediately thrown out of the room, what could be the problem?

• Novel

  Good evening. Please give me some advice. I reset all the settings on the router, configured it according to your instructions. As a result, the connection status lights up green icons, but Internet pages do not open. Wifi also does not work. Thanks in advance!

• VIKING

  Hello!! bought Dir-300! I connected everything to the computer as in the instructions, went to the browser in the address bar, entered the address, it opened a page for me where in the left corner there is the inscription d-link dir-300 and the rest of the field is a gray screen! I tried and reset the settings to do the same thing, what should I do???? in advance thankful!

• Helen

  Good evening. Help me please. I brought a Wi-Fi router from Rostelecom. I would like to connect it to the Internet via a modem. I inserted the cables correctly, as in the picture, I go to the browser, but it doesn’t load. I don’t know what to do!(

• Griff

  Hello. I have the same problem, the router worked fine for several years, but yesterday all devices stopped seeing it and even connected it directly via cable, but to no avail. The power lamp and the Internet are constantly lit yellow, does not respond to reset and does not enter the settings via the PC. Tell me what to do?

In order to start at a construction site D-Link router DIR-300, open the box and boldly tear off the orange sticker from the router. You can forget about the sticker.

We connect the router to the computer using the wire (blue patch cord) supplied in the kit.

First, open the browser ( Internet Explorer, Firefox) and type 192.168.0.1 in the address bar.

Connecting via a wireless network to a router may not always be successful, since in addition to your router there may be others available, it is possible to connect and configure someone else's D-Link DIR-300 router.

Login: admin

Password:(we leave the field empty, although out of habit I want to enter admin)

On the "Installation" tab, select the "Internet Installation" tab, and then the "Manually set up an Internet connection" button.

Looking ahead, I will say that the address on the provider’s local network can be issued dynamically or be static, usually at the request of the user. For a static address, providers usually ask for additional subscription fee. There are two options D-Link DIR-300 router settings, depending on the type of receiving addresses in your case, I personally use a static address, it’s more convenient.

Setting up a D-Link DIR-300 router with dynamic IP address assignment.

Option D-Link DIR-300 router settings No. 1, if the address is obtained via DHCP, i.e. dynamically.

In the “Internet connection type” field, select “PPTP Dual Access” (namely dual access, I don’t know the fundamental difference, but this is how you need to do it).

1. Select a connection with dynamic address assignment by the provider "Dynamic IP address".

2. MAC address – if the provider’s network has a binding by MAC address, click MAC address cloning, and router D-Link DIR-300 will copy the MAC address from the network adapter of your computer, this is important in cases where the router was not purchased at the time of connection to the provider.

3. IP address/server name – IP/Server name of the provider.

4. Account PPTP – username for authorization in the provider’s network.

6. Re-entry PPTP password – repeat the password for authorization in the provider’s network.

7. Select the connection mode - connection setup mode. In the illustration, "Always-on" is selected for permanent connection. "Connect-on-Demand" - establishing a connection when necessary - that is, when traffic directed to the Internet appears, the router establishes a connection, and if there is no activity for more than the time specified in "Maximum Idle Time", it disconnects. If you select "Manual", the connection is established and terminated manually.

8. Save changes to

Setting up a D-Link DIR-300 router with static IP address assignment.

1. Select a connection with a static address value "Static IP address".

2. IP address - the address issued to you by your provider.

3. Subnet mask.

4. Provider gateway.

5. DNS – DNS Server provider.

6. MAC address - if the provider’s network has a binding by MAC address, click Cloning MAC address, and the router will copy the poppy from the network adapter of your computer, this is important in cases where the router was not purchased at the time of connection to the provider.

7. IP address/server name – IP/Server name of the provider.

8. PPTP account – username for authorization in the provider’s network.

10. Re-enter the PPTP password – we repeat the password for authorization in the provider’s network.

11. Select mode connection mode connection setup. In the figure, "Always-on" is selected for permanent connection. "Connect-on-Demand" - establishing a connection when necessary - that is, when traffic directed to the Internet appears, the router establishes a connection, and if there is no activity for more than the time specified in "Maximum Idle Time", it disconnects. If you select "Manual", the connection is established and terminated manually.

12. Save changes to settings of the D-Link DIR-300 router by clicking the "Save settings" button.

After correct settings, connection router D-Link DIR-300 Internet connection must be installed, as indicated by the "Internet Online" indicator on the left side of the browser screen.