Why doesn't my smartphone see Wi-Fi? Why doesn't my phone see WiFi? WiFi program for phone

Twitter

A large number of subscribers who use mobile communications quite often ask questions about network problems, one of which is: “Why can’t my phone see WiFi?” It is now impossible to imagine that any of mobile devices remained without access to the Internet using this network. It is also natural that even at home users have home network WiFi.

Why don't mobile devices see WiFi?

The WiFi network is now considered very convenient, accessible and mobile in almost all corners globe. She has many other advantages. For example, you can see quite significant savings on installation, deployment and expansion of the Internet. In addition, WiFi communication fully guarantees the compatibility of a range of equipment of various types and many users mobile communications at the same time in the same coverage area. But, unfortunately, not all mobile device users have a chance to use this type of communication. And, of course, this begs the question: “Why doesn’t the phone see WiFi?”

Solving the Network Visibility Problem

Naturally, first you need to determine the reason why the phone stopped seeing home WiFi, that is, check whether there is a connection at all. To do this, you can perform simple manipulations, for example, see if there is a connection to WiFi from other types of mobile devices. You also need to reboot the adapter.

Possible reasons why the phone does not see WiFi may be as follows: the user's mobile device must have the appropriate equipment - a special chip. Also, a large number of users, surprisingly, do not know how to configure this network on their own.

To solve the problem of why the phone does not see WiFi, first you need to look at the settings of the router itself. Typically, a WiFi router automatically selects a given access point (channel). A large number of mobile phones begin to experience minor problems when this same channel is above 12. You should change the channel itself to a value from 1 to 9, reboot the device and try to connect to the network. Naturally, you shouldn’t forget about the settings of the mobile phone itself.

And if everything is configured correctly, you need to check the operation of the router and mobile device. You can also connect to a free access point somewhere to check. And if the phone sees the network, then most likely WiFi problem lies in the home router.

Network connection problem for Lenovo phones

Very often, users of phones like Lenovo also experience network connection problems. The problem arises that Lenovo phone Doesn't see WiFi. The device itself provides the ability to work on channels from 1 to 11. Often the router is configured to a channel higher than 12, it turns out that there is incompatibility between the mobile device and the router. If changing the channel helps for other mobile devices, then Lenovo needs to perform other actions.

First you need to find the build.prop file on your phone and replace the line ro.wifi.channels with ro.wifi.channels=14. This manipulation can be performed directly on the computer in any text editor by transferring the original file via USB. After this, you need to restart both the phone and the router. After all these steps, the mobile device should see the network.

WiFi programs for your phone

In order to use all the capabilities of your mobile phone when connected to the network, they use numerous software. Currently available big choice WiFi programs for your phone. Such applications are used to turn a mobile device into an access point to a WiFi network. The main thing is to choose good and inexpensive traffic mobile internet, because, in principle, the mobile device will turn into a gateway between the 3G and Wi-Fi network. And this will allow the device to connect to world wide web. Programs are divided by type of mobile phone platform, the most popular are Android, iOS, Windows Phone.

Android based WiFi programs: WiFi Tether and WiFi HotSpo

Nowadays, all multifunctional telephones used to access the network social services or communicating on the Internet, practically become unnecessary if the phone no longer sees WiFi. When solving this problem, many realized that WiFi Tether is considered a very easy to use program for the phone for Root Users. The only thing that is not so popular with users is that it requires rights Root access, but it pays off with easily accessible features and ease of use. By default this program sets WiFi point V open mode, connected without a password. Therefore, before using this program, you need to select an encryption protocol and specify the key to connect the network.

Another WiFi program for your phone is WiFi HotSpo. It is also easy to use, but it has much fewer functions than WiFi Tether, but when using this particular program mobile phone no need to “root” in advance. And what is attractive about this application is that it has such a function as USB Tethering. It allows you to use your phone as a wired modem when connected via USB to a computer.

iOS based WiFi programs

Unlike programs for Android platforms, similar utilities for iOS they are not so common. But still there is good program WiFi for an iOS phone, and that's MyWi. This application allows you to turn your mobile device into a modem. But for this to become possible, Apple devices you need to "unlock" it first. The application is very good opportunity monitoring. And if suddenly the connection is not established, or it works with interference, MyWi has the ability to select another channel. Its only disadvantage is that it is paid.

Program for Windows Phone

In one of the first versions of phones based on the operating Windows systems Phone it was impossible to use tethering. But in subsequent models mobile devices this option was built into the system itself. It can be blocked depending on what specific model phone is in use. The maximum connection to a network access point with active tethering is no more than five other mobile devices.

The problem of connecting mobile devices to the network and its solution

It is a very common belief that quite soon a WiFi network may replace one of the available connections- mobile. But this raises one problem. It is still not possible to roam on a global scale. After all, this network is this moment has a small radius of action. And problems arise in the form that the phone does not connect to WiFi.

Nowadays, this network is already quite widespread everywhere. Developers such as Samsung, Zyxel, and Hitachi were among the first to produce phones with network support. Also, some time later, other manufacturers began to develop such phones.

Today, the communication standard is considered probably the most inexpensive, and many providers provide these services for free. But you don’t always have the opportunity to take advantage demon wired network, and sometimes the question arises about what to do if the phone does not connect to WiFi.

It happens that a mobile device sees the network itself, but does not want to connect to it. This especially often happens when the phone does not see home WiFi. If in places common use, where the network is provided, such problems have not arisen before; often the solution lies not in the phone itself, but in the home router, in its settings.

When solving such a problem, it is not necessary to turn to professionals; you can fix everything yourself. To do this, you need to go to the device settings and change them. This can be done using any Internet browser. You need to dial the router's IP directly. These are the designations: 192.168.1.0 and 192.168.1.1. Next you need to find the DHCP section and check the Enabled section, in other sections - Default Gateway and Primary DNS - you need to enter the router's IP.

Thus, if all actions are performed correctly, then the issue should be resolved. This method helps protect data exchange, that is, it makes it possible to set a password for a network connection. Only those users who are allowed to connect to it will connect.

Today, portable devices are gaining more and more popularity compared to personal computers, and there are a number of reasons for this. Modern laptops, tablets and phones are not just compact in size. They communicate with the Internet via Wi-Fi, and this is important, because Wi-Fi networks are quite widespread today. It is available in cafes, restaurants, libraries, train stations and even in public transport. All this thanks to the Wi-Fi module found in portable devices. However, sometimes this wireless connection It doesn't work quite correctly.

A little about Wi-Fi coverage

The Wi-Fi network is wireless and based on IEEE-802.11. Today the data transfer speed through this network can reach 600 Mb/s. Wi-Fi coverage has a number positive aspects, namely:

To connect to a phone, laptop or tablet, you don't need a cable at all. Thus, the amount of cash costs is reduced.
The owner of a phone, tablet or any other portable device is not limited to a specific place. The Internet can be used anywhere the user desires.
Wi-Fi coverage can be used without problems by owners of phones, tablets and smartphones.
Despite the fact that there is only one Wi-Fi network in the room, many users with a phone or tablet can simultaneously connect to it.

Reasons for Wi-Fi connection failures

The reason such as the portable device being too far from the connection point, that is, the router, is not worth mentioning. The main thing is to maintain the required distance. However, if a laptop, phone or tablet is located a few meters from wireless router and there is no connection, there are several reasons for this. So here are the reasons:

Older laptop models have a special small button to turn on/off the Wi-Fi connection. Therefore, it is worth checking that the connection is simply turned on. In new models, you can use a key combination, for example, Fn and F2, to enable Wi-Fi access. Additional help The device documentation will provide.

The next reason is damage to the drivers that ensure high-quality operation of the Wi-Fi module. The problem is easily solved by reinstalling the drivers, which can be downloaded using the manufacturer's official website. Other sites may offer low-quality products.
Sometimes the adapter module does not work at all. This is caused by the lack special utility, which allows you to manage your wireless network. The utility can be found on the manufacturer’s website or installed from the disk included with the laptop.
Sometimes WiFi connection completely inaccessible. This refers to cases when all devices recognize the network, but one of the devices does not. In this situation, you first need to turn off the router for 10-30 seconds and then turn it on again. Sometimes the problem occurs due to an unexpected failure in the router settings. All you need to do is configure it again. In the current situation, the most quality help will be provided by the provider's support service, because each provider has its own type of settings.
It also happens that the signal is almost elusive, characterized by low level. At the same time, some devices recognize the Wi-Fi connection, but connection is still impossible. This situation may arise if the router is located quite far from the laptop, phone or tablet.

Theoretically, the reason could be Wi-Fi failure module in a laptop or any other device. Moreover, if the warranty is still valid, you can easily exchange the purchased product. If you have an old device, repairs can be very expensive. Therefore, many advise purchasing an external Wi-Fi adapter, which is quite affordable.

So, it is important to remember that it is not enough to just purchase a router, connect the appropriate cable to it and connect to the Wi-Fi network. Setting is required, which is best left to a specialist.

Wi-Fi has long been firmly established in the lives of mobile Internet users. One day a smartphone, tablet or laptop refuses to connect to the router - the owner of these devices will have to figure out why this happened and how to fix it.

The main reasons why the gadget does not see the Wi-Fi network

The smartphone or tablet does not see the Wi-Fi network because:

the router lost power;
the router itself has failed (physically, or “frozen”);
Wi-Fi communication is not enabled (on a new device, or the router was previously used as a wired router);
Wi-Fi connection is not enabled on your smartphone or tablet;
glitches or viruses in the gadget’s operating system.
The router does not broadcast the name of its network.

As you can see, the problem lies both in the router and in the gadget or PC itself. Both devices need to be checked.

Checking and reconfiguring the router

Often, checking the operation of a Wi-Fi network begins not with a PC or gadget, but with a router. The reason is the simultaneous loss of access to the Network on all devices connected to it.

How to restart the router

As an example - TP-Link routers.

Any router can be restarted by unplugging the power adapter for half a minute.

This is convenient - no need to turn off the power adapter

Some routers, such as those from TP-Link, have a power button on the back (not to be confused with a reset button in a tiny hole pressed with a paperclip or toothpick).

Reset router settings to factory defaults

Resetting the router allows you to roll back unwanted changes that you made out of ignorance, or (less often) due to viruses that got into the firmware or onto your PC/gadget.

Reset can also be performed using a button hidden from accidental pressing into a special hole.

Schematic placement of the reset button on most routers

Any point is required, for example, a paperclip bent at one end. After resetting the router, try connecting to your wireless network again, the Internet should work.

Optimizing router settings

Selecting settings that do not cause headaches when working on the Internet from any PC or gadget is a task within the capabilities of any user.

Checking your router's security settings

As an example - ZyXEL routers. Security is the first priority when setting up wireless, please do the following.

The router will restart, try connecting to your network.

Changing the Bandwidth

Changing the 2.4 GHz frequency band is an "act of desperation" when other settings have failed. But the user will pay for this by the fact that half of his (and neighboring) devices simply will not be able to connect. As an example, use the ZTE F660 router.

The Wi-Fi network settings (without encryption) in ZTE routers look impressive.

For example, the power of a Wi-Fi transmitter allows you to limit the coverage radius to one or two rooms - converting the percentage of coverage radius into milliwatts delivered per Wi-Fi antenna, we get 3–100 mW. For the percentages specified in the settings, the average coverage area in an apartment building or office building is valid. Specifying 10% will allow you not to create interference for your neighbors on the entrance/floor/street (“not flying” the signal of your router into your neighbor’s territory).

Comprehensive settings in the router can also be achieved in a “gray” way, “flooding” as firmware instead of standard firmware OpenWRT firmware(DD-WRT) - free software for routers from Chinese manufacturers.

OpenWRT allows, for example, to configure work with “exotic” models of 3G/4G modems that are not available in standard ones D-Link firmware, TP-Link and ZyXEL. You can also fine-tune the bypass of tethering restrictions of Yota and other operators, integrate a torrent client and Tor encryption, and even connect external drive without a PC/gadget - to save downloaded content to it. This is achieved by installing additional scripts in the router’s flash memory that work with the main OpenWRT software - in contrast to the “native” firmware of the router, where such fraud is not provided for (“native” firmware is already assembled).

Video: switching the Wi-Fi channel in TP-Link routers

Checking Wi-Fi operation in Android smartphones and tablets

Despite the fact that tablets and smartphones, unlike PCs and laptops, where the Wi-Fi module is often removable/external, do not require complex diagnostics, the problem may lie in the gadget itself, and not just in the router and/or modems (if An ADSL/ONT modem or a 3G/4G USB modem works in conjunction with the router). This is true for the Apple iPhone/iPad/iPod/Watch, which will be discussed below, and for outdated gadgets based on Symbian, BlackberryOS, PalmOS and their other modern analogues.

Checking connection to a known network in Android

First, give the command “Settings - Wireless Networks” and check if the airplane mode is set - it blocks the operation of all radio transmitters of the gadget (with the exception of the GPS receiver).

Unlocked MTC-916 (ZTE Racer) and its Wi-Fi settings

Go to the Wi-Fi settings and select a network for which you know the key (for example, this is your ZTE MF90+ pocket router or similar). All routers (and gadgets/PCs operating in Wi-Fi dispenser mode) that you connected to are signed as known networks.

If there is no connection, main reason - wrong password from the Wi-Fi network, with which the gadget saved this network in the list of known ones. Give the command “Network information” (by clicking on the menu button under the visible part of the sensor) - “Delete”, then connect to the same network again.

Delete the settings for the router, then re-enter them

Another reason could be that the device itself freezes due to a virus or advertising code that overloads the processor and RAM in the gadget. Unlike iPhone and others Apple gadgets, reliably protected from such sabotage, Android devices are reflashed precisely for this reason - when they freeze, any control is lost, including the submenu with Wi-Fi settings.

Restarting your Android device

If your Android smartphone or tablet is so frozen that it can no longer be controlled, and is not even able to restart its built-in Wi-Fi module, you can try to restart it from the power button by giving the “Restart” command. IN latest versions if problems with the performance of the operating system are detected Android system restarts automatically.

Try also calling a frozen smartphone. If the charge level before the freeze was low, wait until the battery is completely discharged, calling the frozen gadget again and again when the call tone passes - it happens that the 3G terminal in the smartphone receives calls and SMS, but the screen remains with a frozen backlight or is turned off. If the call fails (clicks and the response “Subscriber unavailable” after one or more dialing attempts), remove back cover, remove and insert the battery back, turn on the smartphone. If your smartphone does not start, contact a service center or try to reflash the gadget yourself (if you are confident in your actions and have the necessary knowledge).

Reconfiguring an Android gadget

A new reconfiguration begins with resetting user data and OS settings. To avoid losing valuable files from the SD card, it is recommended to remove it. Depending on the gadget model, the microSD card slot is located next to the SIM cards and/or hidden button"Reset".

Disk C: (gadget flash memory) will be cleared (Android user folders).

Perhaps with full reset Android will be removed Root access - gadget “administrator” privileges implemented third party applications type KingRoot. In this case you will lose full access To system processes, services and hidden (including system libraries and drivers) folders and Android files. With a new setup, Root rights will need to be set again.

Now do the following.

Go to the already familiar Wi-Fi submenu and reconnect to any of the networks you know.
As soon as the Internet is available, go to Google Play and reinstall the apps you were previously using.

The operation of the Internet via Wi-Fi is indicated by attempts in the background Android services update preinstalled programs(these updates are enabled by default) and send some information about the gadget to Google.

Video: scanning airwaves with Wi-Fi Analyzer in Android

Solving Wi-Fi problems on iPhone

operating room iOS system for iPhone, iPad, iPod and Apple Watch almost completely similar. Everything that is said about the iPhone is also true for other Apple gadgets.

Restarting the Wi-Fi adapter in iOS

Operating Apple systems very reliable and highly productive - the company is scrupulous about the performance of its gadgets and stops updating iOS on outdated models of mobile devices as soon as comprehensive checks show that these devices have exhausted their usefulness and will hang with the next iOS update. So, iPhone support 4s discontinued as of August 2016 - last current version is 9.3.5 (“top ten” can only be installed using hacker methods). Therefore, settings, in particular Wi-Fi, should not freeze.

The connection should work.

Resetting network settings on iPhone

Give the command “Settings - General - Reset”.
Choose to reset iPhone data and settings
Select Reset Network Settings.
Select Reset Network Settings
Confirm deleting network data.
Confirm the action by clicking the network information reset button

Information about operator settings, Wi-Fi networks and information about what is configured for distribution iPhone Internet(access point mode) will be erased.

Restart, "break" iPhone

"Break" or cleaning random access memory iPhone, is done as follows.

Press and hold the button turn off iPhone(“Power”) until the software shutdown slider appears.
Release "Power" and press and hold the "Home" button (on iPhone models that have one) for a few seconds.

The shutdown screen will change back to the iOS desktop and the buffer (RAM) will be cleared. If you have any left running applications, then they will re-load the data on which your work has paused.

Restarting (excluding a “hard” reboot - short-term alternate pressing of the volume keys and holding down the “Power” button until the gadget screen goes dark) is turning off the iPhone (the “Turn off” option on the slider) and then turning it on.

Unfortunately, there are no Restart and ReSpring sliders in iOS ( safe mode without background and animations, launched only if you have a jailbreak) - be content with what you have.

Other reasons for lack of Wi-Fi connection

The reasons for the lack of connection to the router are as follows.

The coverage area is too large - the device sees the router/hotspot/Wi-Fi base station, but cannot “reach” it itself. This can only be achieved by using a second router in repeater mode, with a directional antenna (usually homemade) directed towards the original repeater.
The owner changed the password/encryption and made the network closed/restricted. The old settings are now useless.
There is a connection, but the provider’s page appears with information about non-payment of the tariff, exhaustion high-speed traffic or the need to watch advertising to gain access to the Network for so many minutes, hours or the whole day, or to confirm low speed (if any).

If all else fails

The problem probably has hardware rather than software causes.

Malfunction of the router, USB modem or Wi-Fi module

Breakdown is different. This determines how repairable the device is.

Failure of microcircuits. One day the router turns off forever - for example, if it was located under a windowsill, and water from a flower pot spilled on it, shorting the outputs of the microcircuits.
Frequent overheating of the router: weak signals from connected devices and cellular networks, critical dustiness (location of the router in a dirty and unmaintained area of the room).
Minor failure - drying out or explosion of one of the electrolytic capacitors on printed circuit board; here it needs to be replaced, because the circuit diagram of the device is broken - it will not start, or will work unstably.
The router worked for many years, but recently it began to “glitch” and freeze - it was increasingly rebooted abnormally, and the flash memory “died”. Chinese equipment, especially cheap ones, ages and wears out faster than top models from well-known companies like Apple or Samsung.
Accidental breakdown of the router by static electricity when opening it, or from overvoltage in the network. It happens when the power grid is supplied not with 220 volts, but with an interphase voltage of 380, but such cases are vanishingly small.
Connecting the “wrong” power adapter to the router: instead of a 9-volt one, the user accidentally connects 19 volts (for example, from a laptop). In the best case, the stabilizer on the router board explodes, and if it is missing, the entire “signet” burns out.

If the router model is expensive, you can try to bring it back to life by taking it either to a computer or “gadget” service center, or to a non-certified repair shop household appliances and electronics. USB modems and external modules Wi-Fi where more difficult to repair due to their compactness and “jewelry” assembly.

Mobile device malfunction

Everything that was said above about routers is also true for gadgets and laptops, but there are differences. So, Apple technology, despite the “advanced” protection from motley “Kulibins”, with strict adherence to step by step instructions opens with a bang. All that's left to do is to carefully handle the cables and remove the battery from the glue (if necessary, replace it).

Many tablets and smartphones with Android, especially at below-average prices, are even easier to understand. Apart from a few screws and primitive “hook” type locks, nothing holds the front and back parts of the case together, and the “signet” is generally placed on a large drop of glue and can be easily removed; the battery is generally removed in a second, as on Nokia smartphones 2000s year of release. These are, for example, Archos tablets, ZTE smartphones and Huawei.

In case of failure of microcircuits (3G/4G/Bluetooth/Wi-Fi/GPS radio modules, CPU, RAM, flash memory, Lightning/microUSB interface) motherboard is considered unusable, because, again, the finest assembly does not allow it to be “raised from the ruins.” Almost always a new gadget is bought - most often previous model iPhone on sale, or similar technical specifications Android model. However, if the speakers, microphone, SIM and microSD sockets fail, the case is cracked, the sensor is broken, this component can be replaced. It is best to carry out all replacements of failed units and components at a service center.

In most cases, if you lose your Wi-Fi connection, you don’t need to run to a service center. Most often, problems are of a software nature, and even flashing the device should not scare you. Everything can be resolved.

Unlike a wired network, a Wi-Fi connection requires additional authentication, since the connection to the network within the range of the signal emitted by the router is publicly available. Here, electronics are responsible for the Internet connection and there are no reasons why the phone cannot see wifi at home, there can be many: from ISP problems to router malfunctions. However, this problem is extremely common, and we will look at the most “popular” reasons that the phone does not connect to home wifi in this article.

Why the phone does not connect to wifi: establishing the correct “diagnosis”

So, if your phone does not receive Wi-Fi from the router, you should check:

1. Is the router frozen?.

Indeed, some of the reasons that the phone does not see Wi-Fi can be safely called mystical. After all, this is what all unexplained phenomena are called? In fact, all routers without exception periodically refuse to perform the tasks assigned to them, and even the manufacturers of this equipment cannot answer why this happens.

So, if your phone stops receiving wifi after fruitful work with a wireless connection, first of all you need to reboot the router. To do this, just turn off the device using the ON/OFF button on the device body (or unplug the power plug from the POWER socket), wait 30 seconds and reconnect the router to the power supply.

Thus, if the phone does not see wifi router due to its freezing, the problem will be resolved.

2. Correct phone authentication in the wireless network

If an authentication error occurs and the phone does not connect to WiFi, you first need to restart your mobile device.

3. Is the number of devices on the home network exceeded?

To find out why your phone doesn't see wifi at home, and see how many devices are allowed to use your wifi.

You may have turned on your laptop, tablet, phones, etc. and your router only supports 16 wireless connections to your home network.

Or, you bet too much, and the student from the next door decided to show his friends that he is a cool hacker. The young burglar picked up the password and gave it to his friends.

Unauthorized connections can be “banned” through the router’s web interface, after which be sure to change the password for accessing WiFi to a complex and unique one.

After changing the key, do not forget to delete all connections on your mobile communicators, and connect to the network with a new password.

4. Is the SSID repeated?

This is rare, but it happens. Some people either set a standard network identifier, or simplify the unique name to a simple one, for example, “dlink”, “tplink”, etc. If someone nearby also did not strain their imagination, then the next time they connect to home wifi network, an authentication error will occur.

Turn off your router and see if its name is listed available WiFi your phone's networks? If a network with the same name already exists, then change the SSID to a unique one, save the settings and reboot the router.

Nowadays, more and more often, to access the Internet, they use not a computer or laptop, but mobile gadgets such as a tablet or smartphone. And there is an explanation for this - most of the Internet is used to visit sites, versions of which are designed specifically for small screens (social media VKontakte, Facebook, Odnoklassniki, Instagram), and you can’t put a laptop in your pocket. It’s good when the smartphone connects to the network via 3G or GPRS connection, then he doesn't need optional equipment, but if through a wired provider (for example ADSL or local network With shared access to the Internet), then the mobile phone first needs to connect to the router, and sometimes the router does not see the phone or another error is displayed, solutions for which will be discussed further.

By the way, mobile devices have several modes of accessing the Internet, some of which are for distributing it to other connected devices (access point mode).

Smartphone hotspot mode

There is also a 3G modem mode, in which the smartphone connects to the computer using USB cable, and thus the computer gains access to the network via a 3G connection.

But this article will discuss the mode of connecting a smartphone to wireless Wi-Fi router, and in rare cases related problems.

Connecting your phone to the router

In order to successfully combine into computer network phone with a router, first of all you need to make sure that the router is turned on, Wi-Fi module is active and WPS is enabled (if available).

Found Wi-Fi networks

If the network is password protected, a window will open in which you must enter that password.

The password is entered only once, the phone remembers it and does not require entry during subsequent connections.

If there are no errors, the “Connected” status will appear under the network name. That's it, the phone is connected to the router's wireless network.

If you can't connect

But everything is not always so easy and simple, and for a number of reasons you cannot connect to the network.

Let's look at the most common cases:

1. In the router settings, check the “Hide SSID” checkbox.

Hiding a Wi-Fi network

If a ban is set, the router does not broadcast the name of the network, and to connect to it you need to enter the network name manually in your smartphone;

2. Standards do not match. For example, a router operates in the IEEE 802.11g 2.4 GHz standard, and a smartphone operates in the IEEE 802.11n 5 GHz standard. In this case, they will not be able to work in pairs; the standards must either match or be compatible;

3. The router settings may have a limit on the number of subscribers you can connect, and your smartphone simply turns out to be superfluous.

Limiting the number of subscribers

common reason

Third party software

We looked at how to connect your phone to a router without help third party programs, only using the phone’s own operating system. But there are programs aimed at helping in this matter. Let's give an example of one of these.

Appearance of the program

The program is called WeFi, you can download it on the program’s official website completely free of charge: http://www.wefi.com

I am very pleased with the multi-platform nature of the program. Choose operating system our smartphone and download the program to the computer, and then to the phone.

Selecting an operating system

For example, select the Android version. After installation on the smartphone, launch the application and see the initial window.

Initial program window

A big plus of this program is its funny animation. The little man at the bottom of the screen is frankly happy when he can connect to the Wi-Fi network without any problems.

But, nevertheless, the purpose of the program is somewhat different, namely to facilitate connection, and WeFi copes with this task perfectly.

Connecting the program

One of the main features of the program is automatic connection to the network with the most highest level signal. Of course, it can be configured for a specific network, but still the program is designed specifically for automation. The only thing is that you will have to enter the network password once, but without this there is no way.

Also very useful feature, as continuation of Wi-Fi activity after the smartphone goes into sleep mode.

Setting up the program

The only small drawback of the program is the absence of a blacklist; in some cases it may be needed (for example, in in public places with paid, but not corrupted access).

The full operation of the program can be seen in the video review: