Which program to write to a Windows 7 flash drive. Creating an Acronis boot disk


Installing Windows is an inevitable occurrence for everyone personal computer. The most popular operating system from Microsoft is Windows 7. This version is different simple interface and support for almost all devices and programs.

Typically, Windows installation occurs either with DVD disc or from a flash drive. Flash drive provides the ability to install on computers that do not have DVD drive. But if the user formats the flash drive sooner or later, then the DVD disk will most likely always be stored, allowing you to reinstall operating system any time.

What is a boot disk

A boot disk is a medium that contains bootable operating system files. Simply put it is a disk or usb drive c Windows installer. A boot disk allows you to install an OS without having an operating system on the hard drive itself. That is, even in the most critical situations, you can reinstall your Windows.

What you need to create a bootable disk

For creating boot disk you will need:

  • Windows image. For ease of recording, it is recommended to download operating room images into ISO format. On this moment present great amount various Windows builds 7. It is strongly recommended to download images that are as close as possible to a licensed copy of Windows. This option provides the highest operating system stability. You can download a Windows image from numerous torrent trackers.
  • DVD disc. Both DVD-R and DVD-RW can be used.
  • program for recording an image. At the moment, there are many different programs that provide the ability to burn Windows 7 images to disks and flash drives. The programs include applications both provided directly by Microsoft and from third-party developers.

Disc recording methods

Recording methods boot images to disk differ only in the program that is used. The principle of operation in most programs remains the same: the program writes files, creating boot file, which will allow you to start installing Windows even without an operating system on your computer.

Video: How to make a Windows 7 installation boot disk

Burning an ISO image to a DVD disc

You can use many programs to burn a bootable disk; we will look at just a few of them. How to create a bootable Windows 7 disk using Nero? How to properly create ISO image in Nero?

To burn a disc, you must perform the following operations:


How to create a bootable disk using Ultraiso for windows 7?

To create a bootable Windows 7 disk using the UltraISO program, you must perform the following steps:

Creating a disc by copying

In addition to writing operating system installation files to disk, the user also has the ability to create backup copies of the current operating system with the possibility of further restoration. It is recommended to do backup copy directly immediately after installing Windows and all drivers. There are many programs for creating backups, one of the most popular is Acronis.

How to create a bootable Windows 7 disk using Acronis?

Acronis can create backup copies of your current operating system for later recovery. In order to restore a backup, you must also create an Acronis boot disk that will boot without the Windows operating system if your system stops booting. You can save a backup copy of your system either on your hard drive or on a flash drive.

Creating a bootable Acronis disk


Creating a Backup

To create a backup copy of your disk from your current operating system for later recovery, you must follow these steps:


Restoring Windows from a backup

Restoring from a previously created backup copy of your disk from the operating system can be performed in two ways: from Windows environment or with bootable media, which you created in the previous paragraph. Recovery from bootable media is performed if your operating system does not boot.

To restore a copy of a hard drive partition from a computer (from Windows), do the following:

  • open the program Acronis True Image;
  • select the “My backups” section;
  • click on the “Restore” button next to your copy;
  • in the next window, select what you are going to restore;
  • To start execution, click “Restore Now”. After the reboot, the recovery process will begin.

To restore a copy of a hard drive partition from bootable media, you must do the following:


How to Create a Windows 7 Boot Disk Using Daemon Tools

To create a boot disk with using Daemon Tools you need to do the following:


Create an installation disk using alternative programs

In addition to the proposed programs, there are also official application to record Windows 7 installation files from Microsoft - Windows 7 USB/DVD Download Tool.

DTo create a boot disk using this program you must:


At the moment, there are many different programs that allow you to create a bootable disk or bootable USB flash drive for Windows 7. Using these instructions, you can create several various options bootable media from installation files operating system.

Most important point is the choice of the operating system image itself. We strongly recommend that you do not download various assemblies that include a set of programs. Copies of Windows those that are as close as possible to the licensed version will provide the most high level stability during operation.

This article will be filled useful information regarding how to burn an image of any Windows operating system to disk. This is possible in many ways, but I prefer to do it with special program Ultra ISO. My choice is not accidental, since it is simple and convenient program, allowing you to burn discs with any information. If you don’t want to clog up your computer’s memory various programs, then standard Windows tools 7-8 (in version Windows Vista there is also such a function).
When creating a disk image, it is important to remember that this process slightly different from the usual recording of a disc with information (music, films, text files). After all, you need to create a special boot disk that will be recognized by the computer during startup.
When downloading the Windows, Windows Vista or any other operating system from the Internet, it looks like regular file having an extension iso. Many users have recorded this ready file to disk, but noticed that booting from the installation disk does not start when the computer starts. This is due to the fact that in

Next, I will tell you how to record an operating system image from iso extension to the disk so that when the computer starts, installation will begin from the disk. Then from such an installation disk you can reinstall the system on any computer.

Before directly creating an image for recording, you should mention the size of the future Windows image. If for older versions of Windows (XP and lower) a regular blank CD or CD-RW was enough, since the image took up no more than 700 megabytes, then for versions of Windows 7, 8, Windows Vista you will need a DVD. Although for some versions of Windows XP 700 megabytes is not always enough, since there are different variants assemblies with different additional programs, useful utilities etc. The image of newer systems (Windows 7, Vista or Windows Eight) takes up at least three gigabytes.

Burning a Windows ISO image to DVD using UltraISO

First, I will talk about the convenience of the UltraISO image file burning program, which is much more convenient and understandable for anyone to use than, for example, Nero. Just find UltraISO on the Internet and download it to your computer or download it from. Small size allows you to do this very quickly even with a slow Internet connection. Installation software will take no more than three minutes.
After graduation UltraISO installations, it instantly associates itself with the iso extension. That is, any file with this extension will be opened exclusively using UltraISO.

To start burning a disc with an image of the selected operating system, you should open the image with a mouse click. On the screen it looks like this:


The UltraISO program will launch, where the bootable disc will be ready for recording. Simply insert a blank disc into the DVD burner, press the burn button, and confirm by simply pressing the "Burn" button. You just need to wait until the UltraISO program burns the disc, and then you can safely use it to install Windows.


It is best to burn the disc to low speed. The recording quality will be noticeably better. At high speed records, errors are possible when trying to install the operating system.

Burning an installation disc using a standard Windows tool

You can also burn the installation disc using standard Windows programs. This option is available in both Windows 7-8 and Windows Vista. Standard program it will burn an iso image without any problems, and the disk will be bootable, that is, allowing you to install the selected operating system.
ISO files in Windows 7 look like this:

Let's figure out how to burn a Windows image to disk different ways, for subsequent installation of the operating system on the computer. Many computers have special device: floppy drive - a drive for opening optical CD/DVD discs on a PC.

First, the user burns an ISO image of the system to a DVD disc, and then boots the computer from laser disk, on which the system is recorded, to install Windows. For modern versions Windows (Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista) due to big size An ISO image will require a DVD disc, but for a Windows XP image, the capacity of a CD disc is sufficient.

To record a Windows image, DVD or CD discs are usually used in the following formats: DVD-RW, DVD-R, or CD-R, CD-RW. Between abbreviations there may be different designations: “+” (“plus”) or “–” (“minus”). You can use different types of discs to record your system.

Formats DVD-R discs or CD-R cannot be modified after recording, data can only be written to such a disc once. The “DVD-RW” and “CD-RW” formats are rewritable, so you can write new data to such a disc by first deleting old information from disk if it has become irrelevant. It is more practical to use the DVD-RW format, because such a disc can be used many times.

If you need to burn bootable Windows disk on optical media, adhere to the following recommendations:

  • It is advisable to record a system image at the lowest speed supported by the drive to prevent errors during recording
  • during recording it is necessary to provide uninterruptible power supply computer
  • if possible, use the option to check the disc for errors immediately after burning to DVD
  • use disks from reputable manufacturers because this will increase the chances that the boot disk will last long time, when properly stored

First you will need to obtain a Windows image in “.ISO” format, and then burn the system image to a DVD. To record to DVD, select the desired system bit depth: 32 bit or 64 bit, which should be installed on your computer. A multi-bit Windows 10 image that includes both bit sizes (x86 and x64) is not suitable for recording on a regular optical disk, due to the large size of the image file, exceeding the size of a standard DVD disc (4.7 GB).

An ISO file contains all the contents of a DVD or CD stored in a single image file. When recording an ISO image of Windows, you must make the media (DVD disk) bootable so that you can install the operating system on your PC. Record simple disk will not work with data, because such a disk will not be bootable.

Write down installation disk Windows can be done using built-in system tools, or using third party software. In the article you will find instructions on how to record Windows ISO to disk in different ways: first we will try to burn the disk through Windows, and then we will burn the system image using third-party programs.

How to Burn Windows to a Disk Using Disc Image Burner

Using the Image Burner Windows drives you can burn Windows 10, Windows 8.1, Windows 8, Windows 7 to disk. The recorder works the same on these operating systems.

To burn a Windows ISO image to a DVD, follow these steps:

  1. Click right click according to the disk image on the computer.
  2. IN context menu select "Burn disc image".

  1. The Windows Disc Image Burner window will display the name of the disk image file and information about the disk writer. To start the recording process, click on the “Record” button.

I recommend activating the “Check disc after burning” settings item. In this case, you will be convinced that the disc was recorded without errors. The recorded data will be compared with the original image. If errors are found during the recording process, the DVD disc can be re-recorded. Checking the disk will take some time, but you will know that the system was burned successfully. Otherwise, you will not learn anything about errors; at the crucial moment of installing Windows, the boot disk will fail you, and you will not know the real cause of the problem.

  1. A warning window informs you that before recording, all data on the disk will be deleted. Click on the "Yes" button.
  2. Next, the process of burning the Windows image to disk will begin.
  3. After burning the disc is complete, the disc will be checked for recording errors.
  4. Finally, click on the “Close” button.

Download Windows in the Media Creation Tool and burn the system image in the disk image burner

By using Media applications Creation Tool You can download the original Windows image from the official Microsoft website.

Not every user has a DVD drive; moreover, Lately Rare PCs are equipped with them. But you still need to install the system, and for this it is most convenient to use a bootable USB flash drive. Let's figure out how to install Windows 7 from a flash drive - after all, you won't buy a DVD for this purpose.

Before proceeding with installation, please read carefully this article: Various difficulties may arise in the process, which can be solved using one of the methods described below.

The installation process itself can be divided into the following stages:

  • downloading the installation image;
  • computer preparation;
  • Creation bootable flash drive;
  • setting up PC BIOS;
  • Windows 7 installation.

Let's look at each stage in more detail.

Before you burn the image to a flash drive and install the system from it, you need to download it. Today there is a huge number ready-made assemblies operating system, which are equipped with many applications and functions.

Very often in such distributions the default theme or sound scheme is changed. But not all users like such innovations. You only need to download original images created by Microsoft. A huge headquarters of the world's leading programmers does their job better than some artisanal modifier.

A little lower you will find a button where you can download a torrent file to download the Russian version of Windows 7 with 32 or 64-bit architecture. The file was taken from the official Microsoft website and is completely original. Proceed with the download, and when the download is complete, move on to the next step.

After the file is downloaded, open it using a torrent client. If you don't know how to work with such programs, follow our step by step instructions.

  1. First, download the torrent client itself. This will be the qBittoorent application.
  2. Install the program and use it to open the previously downloaded torrent file.

  1. Choose Windows version 7 (in our case it’s professional 64 bit) and click “OK”.

  1. After this, the operating system will begin loading at the maximum available speed.

Getting ready to install Windows 7

First of all, you need to copy to safe place all the information that is important to us is located on drive C. Each user stores data in their own way, so each user has their own choice of folders for backup. Most often these are folders: “Downloads”, “Desktop”, etc.

You can save files to another logical drive (the one on which the system will not be installed) or to external storage. You can also use cloud storage, if there is not too much data. For example, the Mail.ru cloud provides 100 GB of free space.

With an eye to the future, remember: while using your PC, you need to store your data on a disk other than the one on which the system is installed. Divide the physical disk into partitions and store your files on any of them except the system one. To install Windows 7, a comfortable volume of 70–100 GB will be (depending on the type and amount of software used).

Another important point that should be taken into account before the installation begins is the drivers for our network card. If, after installing Windows 7, it turns out that there is no driver for the network card, additional difficulties will arise that will have to be solved using a second computer by transferring files from it via a flash drive.

If you just bought a computer, there is not and cannot be any valuable information on it, feel free to move on to the next section, without copying the data.

Create a bootable USB flash drive

In order to create bootable media and begin the operating system installation procedure, we will need:

  • USB flash drive with a capacity of 8 GB or more. Instead of a USB flash drive, you can use simple map memory with card reader;
  • "Seven" installation distribution with .iso extension;
  • a utility with which we will write an image to a flash drive;

Attention! Before you start creating installation media, remember that all data on it will be irretrievably destroyed.

Making installation media using Ultra ISO

A well-known disk imaging program can create boot drives. Let's look at the algorithm for recording Windows 7 to a USB device.

  1. Download and install the Ultra ISO program from the link.
  2. Run the resulting file and check the box to “I accept license agreement" Proceed to the next step by clicking “Next”.

  1. Using the “Browse” button, select the installation path, then click “Next”.

  1. We don’t change anything here and just move on.

  1. The program is being installed, we are waiting for it to finish.

The Ultra ISO installation is complete, you can run it and go straight to creating a flash drive for installing Windows 7.

  1. The Ultra ISO program can be launched in trial mode, so its functionality will not suffer at all. Click on the button marked in the picture.

  1. Go to the “File” menu and click on the “Open” item.

  1. Select the Windows 7 image we downloaded, and then “Open”.

  1. Go to the “Startup” section and click on the item that we marked in the screenshot.

  1. We make sure that the media we need is displayed in the devices at the top of the window and click on the “Format” button.

Attention! This will destroy all your data beyond recovery. If you have the files you need on your USB drive, save them first.

  1. In the next window, simply click “Start”.

  1. Ultra ISO will once again warn us that all information from the flash drive will be erased. Click "OK".

  1. After formatting is completed, click on “Burn”.

  1. The process of recording “Seven” onto a flash drive has begun. It will take about 5-10 minutes depending on the speed of the drive and the selected OS version.

The recording is complete, our media can be used.

Let's look at a few more options for creating bootable media with Windows 7.

Rufus

This another program, capable of creating a bootable USB flash drive with “Seven”. First, let's download it.

The application, unlike Ultra ISO, does not require installation, so you can run the downloaded file and immediately proceed to the process of burning the OS to a USB device. To do this we do the following:

  1. Select the recording device. This will be our flash drive, in in this case– 16 GB. Then click on the disk icon.

  1. Select the distribution we downloaded in the PC folder.

  1. We begin the recording process with the “Start” button.

  1. Rufus will notify us that all files will be deleted from the flash drive. If you have already created a backup copy or there was no important information on the media, click “OK”.

As a result, it will begin Windows entry 7 onto a flash drive, after which you will have a full-fledged installation media at your disposal.

Attention! Before you begin the process of writing the system to a flash drive, be sure to save all the data on it - otherwise they will be irretrievably lost.

As we see, this method turned out to be much simpler than the previous one, but we will not dwell on this and will consider several more options for recording Windows 7 to a USB drive.

Making a bootable USB flash drive using WinSetupFromUSB

Another application focused solely on writing operating system files to an external drive. Let's take a look at the utility and look at the process of working with it.

  1. Select the path where the program will be unpacked (click on the button with the image of three dots) and click “Extract”.

  1. We are waiting for all the necessary files to be unzipped.

  1. We open the directory into which the unpacking was carried out and launch the program depending on the architecture on which your operating system is built. For us it is 64 bit, so we click on the marked file.

  1. We insert our flash drive into the USB port and make sure that it appears in WinSetupFromUSB. Next, check the box indicated by the number “2” in the screenshot. When the bird is placed, click on the icon with the image of three dots, marked with the number “3”.

  1. Select the image of our operating system and click on “Open”.

  1. All that remains is to press the “GO” key and Windows 7 recording will begin.

Windows 7 is being written to an external drive. Once the process is completed, the flash drive can be used to install the system.

We will not stop at WinSetupFromUSB and will tell you how to burn the OS to media via Windows 7 USB/DVD Download Tool from Microsoft.

Windows 7 USB/DVD Download Tool

This is an official application from Microsoft, so it should, in theory, do the best job of writing Windows 7 to a flash drive. Let's get started with the program.

  1. First, download the utility from the link from the official website. Then we launch it and click on the “Next” button.

  1. We are waiting for the program to install.

  1. We complete the installation process by clicking on the “Finish” button.

  1. Let's move on to working with the program. Initially, we need to specify the file that we will record. To do this, click the “Browse” button.

  1. After the path to the image file is registered, you can proceed to the next step - click “Next”.

  1. Here we should select the type of media on which we will install the “Seven”. Since this is a flash drive, we click on “USB device”.

  1. We make sure that our drive is displayed in the field marked with the number “1” and click on the “Begin copying” button.

  1. After this, we will be warned that all information from the media will be erased and, after confirmation, the process of transferring Windows 7 to a USB drive will begin.

Upon completion, we will receive a bootable USB flash drive, with which it is easy to install the OS on your computer.

The program requires the Microsoft . NET Framework 2.0. If you do not have it, then download the program from the official Microsoft website.

We use the UNetBootin program

The UNetBootin utility is completely free. you can download it without registering or sending SMS. The program does not need to be installed - it works immediately after downloading. An application was created not only for recording to a Windows flash drive, but also for other operating systems, such as Linux or Mac OS.

Let's move on to the instructions for using the application.

  1. First of all, check the “Disk Image” box and click on the button with the ellipsis. In the window that opens we need Windows distribution.

  1. In the drop-down list indicated by the number “1”, select a USB device, indicate our flash drive and click “OK”.

  1. The application will warn us that all data that is already on the flash drive will be irretrievably lost. If we don’t need them, click “Yes to All”.

The distribution package is being written to a USB device. Once it is completed, the flash drive can be used to install the OS.

Command line

You can create bootable media with “Seven” without using any programs using the system itself. For this we will use the command line.

The entire process is described in the form of detailed step-by-step instructions, each stage of which is accompanied by a screenshot for clarity.

  1. Initially, launch the command line. This must be done exclusively as an administrator. We will create bootable media at Windows example 10, but you can get the same result on Windows 7 - 8. Press the Win + R button combination and in the window that appears, press the “Browse” key.

  1. We follow the path indicated in the screenshot with the number “1” and find cmd app. We right-click on it with our manipulator and select “Run as administrator”.

  1. We write to command line command diskpart and press Enter.

  1. To start recording to a disk, you must initially select it, and take this choice responsibly, because all data from it will be deleted. You can view a list of disks using the operators: “list disk”, “list volume” or “list partition”. The first two show a list of disks, the third displays the number of partitions and their names. Insert the flash drive into the USB port and enter the “list disk” command in DISKPART. Next press Enter. You will see a list of all drives currently installed in the PC.

  1. Select the disk that we need. To do this, enter select disk disk_number. The disk number can be viewed in the previous step; for us it is “1” since its size is 14 GB, which corresponds to our flash drive.

  1. We remove the disk with the clean command. Make sure you do it again right choice– all data on the media will be completely deleted.

  1. Now we need to create the main partition for the flash drive, from which we will boot in the future. Enter the command create partition primary and press Enter.

  1. We set the drive letter using the assign letter=drive_letter operator. Let's do that. We know that our PC has drives C, D and E - therefore, we specify F. The final command will look like this: assign letter=F.

  1. You can also specify the partition size. If you skip this step, it will take everything free place. Set size logical drive You can use the command create partition primary size=disk_size. The size must be specified in megabytes.

  1. Select our disk using select commands partition 1 (indicate your disk number) and press Enter.

  1. Now we need to make our section active. To do this, use the active operator.

  1. All that remains is to format the flash drive - write a command like this: format fs=fat32 quick.

  1. Exit DISKPART using the exit command. Now you need to prepare the files for recording. We unpack our Windows 7 image using any archiver (we will use the usual WinRAR) and extract all the files to our flash drive.

The installation media is ready and you can use it.

We use the WinToFlash program

Let us describe the process of working with another program for recording Windows 7 and other operating systems on a USB drive. To get started, download the utility from the link from the official website.

  1. Install the program and run it. In the window that opens, select the item marked with a red frame.

  1. At the very top, select “Windows”, then indicate Windows 7 and press the button indicated in the screenshot with the number “3”.

  1. Specify the path to Windows image 7, which we downloaded. To do this, click the “Select” button.

  1. Click on “Add”.

  1. We make sure that the flash drive we need is indicated as the target, and click “Run”.

After this, the process of creating bootable media with Windows 7 will begin, after which the device will be ready for use.

Burn a bootable USB flash drive using WinToBootic

This application is one of the simplest tools for recording operating systems on external media. To work with the utility, you do not need to install it, nor do you need administrator rights. It will work like with Windows files, and with her images. The interface here is simple, and the speed of the program is pleasing.

To burn Windows 7 to a USB flash drive via WinToBootic, do the following:

  1. First, download the program from the link and launch it. Check the box next to “Quick Format” and click “Do It!”

  1. We answer the request for formatting in the affirmative.

  1. We are again notified that all data on the flash drive will be deleted. Don't forget to save important information from the media, if it is there, and click “OK”.

  1. The preparation of the flash drive is completed, click “Thanks!”

  1. Next, select the files that will be written to our flash drive. To do this, click the icon indicated in the screenshot and select the image we need.

  1. Click the button to start the process again.

Windows 7 will begin recording to the USB flash drive. When it is finished, the device can be used to install the system.

How to boot from a flash drive

To successfully install Windows 7 from a flash drive, it is not enough for us to simply write the operating system onto the media; we also need to force the PC to boot from something other than hard drive, but from a USB drive. This can be done in two ways: either using BIOS modifications, or through a special boot menu.

Regarding the Boot Menu, we can say that it starts different keys, depending on the model of computer or laptop. You can see which button is responsible for this on your device in the instructions for it. We provide a list of combinations for the main brands of computers and laptops:

Launching Boot Menu on PC:

Launching Boot Menu on a laptop:

Below is a list of keys that launch the BIOS on different computers and laptops:

For clarity, we will show the process of installing a flash drive as the first boot device using our PC as an example motherboard Asus:

  1. We turn off or restart the computer and after it starts, press the button to go to the BIOS (for us it’s Del).

  1. This is what the BIOS itself looks like.

  1. Go to the Boot tab.

  1. We install our USB drive as the first device.

The process is similar on different computers, although the names of the tabs and items may differ. In order to understand how to enter the BIOS of your PC, read the instructions for it.

Installing Windows 7 from a USB flash drive

After the BIOS has been configured, you can proceed directly to installing Windows 7 from a flash drive. Let's get started.

  1. Immediately after the system starts, you will see the following window (data for installing Windows 7 is being preloaded).

  1. Set regional parameters. Select your system language, region of residence, and keyboard layout. If desired, all this data can be specified after Windows startup When the setup is complete, click “Next”.

  1. At the next stage, simply click “Install”.

  1. All you have to do is accept the license agreement and the installation will begin. Check the box as shown in the screenshot and click “Next”.

  1. Select a mode complete installation- this is the so-called clean option, when all old data on the system partition is deleted.

  1. We are in the section settings menu. Click on the entry outlined in red.

  1. If your disk is not partitioned, you can do this here (for Windows 7 it would be best to use about 100 GB free space, the rest will become drive D). Don't forget to format system partition before installing Windows on it. When the operation is completed, click on the “Next” button.

  1. Finally started Windows installation. We are waiting for the process to be completed.

  1. Next, the system will reboot and we will be greeted with the Windows startup screen

  1. Initial optimization is underway. The system prepares all the necessary files.

  1. System services begin to start.

  1. After which we proceed to complete the Windows installation

  1. We are again informed that we need to restart the computer.

  1. The system will check how productive our video card is.

  1. Now we need to provide our details. We write an arbitrary name and computer name. Then click “Next”.

  1. If necessary, you can set a password that the system will request upon startup. We skip this step since the computer will be at home.

  1. If you have Windows key 7, you can enter it here, however, you can do this even after the system starts. We skip this step.

  1. We choose the system protection option depending on our personal preferences. We will be installing another antivirus, so the regular one will not be needed.

  1. Enter the time and time zone. Then click “Next”.

  1. We decide on the type of network. It's pretty important step, since if we indicate home network, but we are connected to the public, our security will suffer greatly.

  1. Settings are being applied and automatic setting networks.

  1. Last minute of optimization before our Windows 7 launches.

As a result, we installed Windows 7 from a flash drive, the creation of which was described above.

Instead of an afterword

We've looked at a ton different programs and tools from Windows itself to answer the question: how to install Windows 7 from a flash drive. However, these are not all options. There are a lot of such programs on the Internet. They differ in their convenience and functionality. Some utilities are better suited for ordinary users, the second - for professionals.

Which method to choose and how to write Windows 7 to a flash drive should be determined based on purely personal preferences. Use the option that you like, and if you have any questions, ask us in the comments. We are committed to the shortest possible time give a comprehensive answer.

Greetings, friends! This article will talk about creating bootable usb Flash drives with Windows 7 on it. That is, we will learn how to write the Windows 7 distribution onto a flash drive so that later we can use this flash drive to reinstall the operating system. The need for such a flash drive arises more often among owners of netbooks and laptops with a non-working disk drive. Also for those people who prefer installing windows from a flash drive rather than from a disk.

Before we move on to the process itself, I would like to draw your attention to the fact that installing an OS from a flash drive has several advantages over installing from a disk. First of all, this is durability, we all know that CDs sooner or later get scratched, become dull and it becomes impossible to install windows from them - errors appear and freeze during installation. This will not happen with flash drives; you can store files on them for as long as you like. The second advantage of flash drives is read/access speed. Almost always windows installation It's faster from a flash drive than from a disk.

But there are also disadvantages. Very old models motherboards cannot boot from a flash drive and in this case you will have to make do with installing from a disk or try flashing the BIOS.

What you need to create a bootable USB flash drive for Windows 7

You need a USB flash drive, windows iso image 7 and the UltraISO program. Previously, I recommended using the UltraISO program for . Today we will burn an image using it to a flash drive.

We take a flash drive based on the size of the image, or vice versa, if you have a flash drive with a capacity of 4 gigabytes, then take an image of a slightly smaller size. I will write the 3.66 GB image onto a 4 GB flash drive. So let's get started.

1. Insert the USB flash drive and run the UltraISO program as an administrator.
2. Now open the image in the program. To do this, select “File” -> “Open” from the menu.

3. An image selection window will appear. Go to the folder where you have the image and double-click on it.

4. B top menu programs Select “Bootboot” -> “Burn image of Hard disk"

5. In the Disk Drive list, select the letter assigned to your flash drive and click “format”

6. Optionally enter a title in the volume label field and click “start”


7. Accept that during formatting everything from the flash drive will be deleted and click “OK” and close the formatting window.


8. Now in the “Write disk image” window, make sure that the recording method is selected “USB-HDD+” and click the “Burn” button.

9. Click Yes.

If, instead of starting to write the image to the flash drive, the line “You need to have administrator rights...” appears in the window, then you did not run the UltraISO program as an administrator and you need to start all over again, but AS AN Administrator.

10. If a line with the text “Start recording” appears, then everything is in order, wait a few minutes.

11. As soon as you see the inscription “Recording complete”, you can rejoice, since you have bootable usb flash drive with windows 7 on it.

Now you have learned how to do regular flash drive boot. You can begin preparing your computer for reinstalling Windows.


2024 gtavrl.ru.