Which TV resolution is better: 1920x1080 or 1366x768. Select the TV screen resolution for the best image
Screen resolution- this is the number of dots (pixels) that make up the image.
Typically, resolution depends on the type and size of your TV screen. In particular, CRT TVs have a real resolution of about 768x576, mid-size plasma TVs have resolutions of 1024x720 or 1024x768, small and mid-size LCD TVs a few years ago usually had a resolution of 1366x768. Currently, there is a tendency towards complete replacement in the LCD TV segment with models with a resolution of 1920x1080, like the largest LCD and plasma TVs.
TVs with resolution 1280x720, 1366x768, 1400x900 or 1680x1050 can be called HDReady, with resolution 1920x1080 - FullHD
It is necessary to distinguish TV resolution and the resolution of the signal it reproduces. There are several signal resolutions with established abbreviated names. DVD resolution (720x576 in the PAL system or 720x480 in the NTSC system) is called the “standard” resolution (standard definition or, for short, SD). Movie resolution 1280x720 is often referred to as 720p and 720i (for progressive and interlaced scans, respectively). The highest resolution currently available, 1920x1080, is called depending on the scan 1080p or 1080i.
Currently, the next generation of television infrastructure, conventionally called 4K or Ultra HD. The screen resolution of the corresponding TVs, as well as the video signal resolution, is 3840x2160(4 times more than FullHD). However, the widespread use of such systems is quite far away, because In addition to televisions themselves, we need video cameras, means of processing, transmitting and storing information. Nevertheless, it is encouraging that the cost of entry-level Ultra HD TVs available on the market has dropped below 30 thousand rubles.
It should be noted that the “useful” image resolution will always be equal to the smaller of the resolution of the TV screen and the video signal. Those. if you watch a DVD on a FullHD TV screen, then the “useful” resolution will be equal to the DVD resolution. Similarly, if you feed a 1080p (FullHD) signal to a TV with a resolution of 1280x720 (HDReady), then the “useful” resolution will be equal to the resolution of the TV, because it's smaller.
In general, the higher the resolution, the better.
However, there are exceptions to every rule. The fact is that in order to display a low-resolution signal on a high-resolution panel, it requires processing, the so-called upscaling. Moreover, if the signal is not of very high quality (for example, terrestrial TV), then the work of the processing algorithms becomes much more complicated. Therefore, if receiving terrestrial TV is the main intended mode of operation of the purchased TV, then You should definitely visually assess the quality of reception in the store. Perhaps in this case the picture quality will be better on a TV with a lower resolution.
One of the most important parameters that you need to pay attention to when buying a TV panel is the screen resolution. The quality of the picture largely depends on it. In addition, this indicator is responsible for eye strain when watching TV shows. That is why many users, before purchasing equipment, want to know what is the best screen resolution for their TV. To answer this question, you should familiarize yourself with the definition of this term and its dependence on factors such as the type of display, the distance between the television receiver and the planned viewing location, the purpose of primary use and other criteria.
What does screen resolution affect?
Resolution is the number of dots (pixels) from which a picture is created on a television screen. At first glance, it seems that the image on the television receiver is solid, but if you come very close and look closely, you can see that it consists of dots located close to each other. These points (aka pixels) are arranged in a grid. The more there are, the clearer and the picture becomes more detailed.
To get maximum viewing pleasure, you need to take care of the appropriate format of the content displayed on the display. But when choosing a resolution You shouldn’t be guided only by a large number of pixels. The distance to the television panel must also be taken into account.
On a note! If the user is far from the TV receiver, he will not notice how clear and detailed the image is, which means he will not fully enjoy the quality of the video. At the same time, sitting too close, a person will see not the whole picture, but individual pixels, which will create a significant strain on the eyes and also will not allow them to enjoy the events on the screen.
Screen resolution measured horizontally and vertically. Thus, the value 1920x1080 indicates that there are 1920 pixels horizontally and 1080 pixels vertically. Modern TVs have different resolution standards.
At the end of 2018, the following standards are relevant:
- Full HD;
- Ultra HD (4K).
HD or HD Ready with the number of pixels 1366x768 is used in budget television receivers. Such devices are well suited for viewing broadcast and some digital channels, where most programs are broadcast in this format. Full HD (1920x1080) used to watch movies in high quality. Thanks to this pixel density, high detail and a very clear picture are ensured. The image quality of Full HD television panels is much better than that of HD devices.On a note! In 2016, test broadcasting was successfully carried out in the new 8K format. However, mass production of such televisions has not yet begun, although the first models have already been released. Since 2018, commercial broadcasting in this resolution has already started in Japan.
The next technological step is resolution Ultra HD or 4K(3840x2160). When buying a TV, this format is the best solution possible at the end of 2018. Equipment with Ultra HD resolution is found only in large diagonals (40 inches and above), but to see the maximum visual effect of the broadcast video, a screen size of 55 inches or more is required.
Format should replace 4K resolution in the near future. The first device was released by Sharp. Today, TVs with this screen format are produced in minimal quantities, which is explained by the lack of content for them (at the moment) and the very high cost.
Resolution by TV type
Types of television receivers differ in the different technologies used to transmit images, so they are characterized by different screen resolutions. Thus, outdated CRT devices have very weak characteristics compared to LCD and LED TVs.
Resolution of CRT television receivers
Cathode ray television receivers have a screen resolution of only 640x480. These inexpensive devices were popular until the end of the 20th century, but are practically not produced today. They do not display the best picture, but such characteristics were sufficient for displaying analogue television channels. To watch TV programs, you only needed to purchase an over-the-air antenna and set up TV channels.
On a note! Due to the fact that by the end of 2018 the Government of the Russian Federation plans to completely switch to digital high-quality broadcasting, CRT television receivers are losing their relevance, but, nevertheless, continue to be used mainly by people of the older generation who do not have the opportunity to purchase more modern equipment.
Resolution of PR TV receivers
LCD and LED TVs today have HD, Full HD and 4K resolution. Liquid crystal (LCD) samples with HD format belong to the budget price segment, while medium-cost equipment broadcasts an image with a number of pixels of 1920x1080, and the most expensive samples are television panels with a 4K screen format.
Which resolution is better
When choosing a TV based on the “screen resolution” parameter, it is worth considering several factors that determine the priority use of equipment. The most important criteria will be discussed below.
For DVD
If you purchase a TV for watching video from DVDs - in karaoke bars, in classrooms, in transport - you can choose budget model with low resolution. This is due to the fact that DVD recordings are in the 720x576 format, which means that even if the TV receiver has a significantly larger number of pixels, it will not be possible to change the image quality for the better.\
For digital television
If HD format was enough for analogue TV channels, then with the advent of digital television models become relevant with a resolution of 1920x1080. By purchasing such a television panel, the user will receive a clear, detailed picture and the pleasure of watching their favorite programs in excellent quality on the big screen.
For the Internet
If the TV receiver will be used to view content downloaded from the Internet, then everything is here depends on the resolution of the saved video sequence. If it is low, a device with a 1366x768 format will be enough for the user. If you plan to watch movies in Full HD or 4K quality, then the television panel must have the appropriate resolution.
Depending on the distance
The distance from the screen to the viewing location should also be taken into account when choosing the resolution of the TV receiver. Optimal distance - 2.5 - 3 diagonal TV. But this statement is true for HD resolution. So, for a device with a diagonal of 32 inches (81 cm), the sofa or chair should be at a distance of 2.5 meters. From this distance, the picture is clearly visible, and the user will be able to enjoy viewing.
Advice! If you watch TV from a distance greater than the recommended distance, the image will be poorly visible and all the benefits of high resolution will be invisible. In this case, it is more advisable to choose a television receiver with a low indicator or a larger diagonal.
Scan frequency - as a component of resolution
In addition to screen resolution, the quality of the picture is seriously affected by the type of scanning, which can be interlaced (“i”) and progressive (“p”). This designation looks like this: 1080i or 1080p. In the case of the first type of scanning, the image is updated twice a minute: the even lines change first, then the odd ones. The disadvantage of this type is the flickering effect that occurs when there is good lighting in a room with a significant content of ultraviolet rays.
Important! Progressive scan is better: it updates all rows at once every minute. Due to this, the picture quality has a positive effect.
Review of manufacturers
In 2018, the model range of almost every manufacturer includes TVs with HD, Full HD and Ultra HD resolutions. This applies to both well-known brands (for example, Samsung, Sony, LG, Philips, etc.) and little-known brands.
Advice! With an equal number of pixels in devices from different manufacturers, other characteristics will also affect the clarity of the picture - brightness, color, matrix, etc., so it is worth comparing by image quality in general, and not by pixel density.
Among brands that have the same resolution, lesser-known companies will have lower prices. Devices made by Sony will be the most expensive. Equipment from Samsung is sold a little cheaper. Approximately in the middle are TVs from LG and Philips. So, the table below shows TVs with Full HD resolution.
| Brand and model | Diagonal, in inches | Screen resolution | Cost, rub |
| Supra STV-LC40LT0010F | 40 | Full HD | 15690 |
| BBK 40LEX-5056/FT2C | 40 | Full HD | 16890 |
| Philips 40PFS4052 | 40 | Full HD | 21890 |
| LG 43LJ515V | 43 | Full HD | 22890 |
| Samsung 43N5000AU | 43 | Full HD | 24990 |
| Sony 40RE353 | 40 | Full HD | 27990 |
Supra STV-LC40LT0010F on Yandex Market
BBK 40LEX-5056/FT2C on Yandex Market
Philips 40PFS4052 on Yandex Market
LG 43LJ515V on Yandex Market
Samsung 43N5000AU on Yandex Market
Sony 40RE353 on Yandex Market
The table shows prices for TV receiver models according to Yandex Market data. The most budget devices of each brand were selected, without any additional options (Smart TV, Wi-Fi, etc.). LG and Samsung TV receivers are presented in 43-inch sizes, because... The 40-inch diagonal is not included in the model range.
So, in order to enjoy a high-quality picture using the maximum screen resolution capabilities, when choosing a TV you should take into account several factors that were given above. However, it is worth taking into account the speed of progress in this area, so that in a year or two the purchased model will also be relevant.
What's the difference between 1080 and 768 resolutions? LCD TVs? This is probably one of the main questions that arise when choosing a specific TV models.
With the advent of high definition technology, resolution TVs led many to confusion, especially now, with the advent of a new format 1080p. Screen resolution measured by the number of vertical and horizontal lines on the screen, e.g. 1366 x 768. Images are created by quickly reading these lines across the screen, starting from the top and ending at the bottom.
There are two ways to read these lines:
Let's look at the differences in screen resolution using the example of two TVs: Sony KDL-40V4000 And Sony KDL-40W4000. Both of these models are capable of reading with interlaced and progressive scanning, but the difference in resolution determines which format they will accept. Screen resolutions vary widely, but to display high-definition images, you'll need a screen with a resolution of at least 1280 x 720. However, a more common resolution is LCD TVs – 1366 x 768, and it is used in the model Sony KDL-40V4000 This allows the screen to display both 720p (interlaced scan) and 1080i (interlaced scan) high definition formats. It's difficult to differentiate between the two formats, but 720p is said to produce softer images, while 1080i displays more detail.
Although the signals 1080i may be displayed at 1366 x 768 resolution, they will be slightly worse due to a slight loss of detail. To fully display 1080i signals, or use the latest 1080p format, you will need a screen with a resolution of 1920 x 1080 - as in the model Sony KDL-40W4000. To decide which resolution to choose, you need to decide how you will use it. It is important to remember that whatever the resolution, the quality of the picture depends on the quality of the signal from the source you are watching. If you watch more often HDTV transmission, resolution 1366 x 768 models KDL-40V4000 will be sufficient. All current high quality TV shows use either 720p or 1080i signals. And while 1080i signals do imply some image degradation, the effect of loss of quality is negligible.
If you want to watch 1080p, or so-called 'Full HD' images that are used by modern Blu-ray or HD DVD players and game consoles, you will need a screen type KDL-40W4000 with a resolution of 1920 x 1080. These screens are more expensive, but they produce better picture quality, and will be relevant when 1080p signals begin to be broadcast. But be careful - not all 1920 x 1080 resolution screens will be able to accept 1080p signals, although Sony KDL-40W4000 will be able.
1366x768 after all. 13.3 is a very small diagonal, while at 1366x768 the pixelation is not noticeable. At 1920x1080 the load will immediately increase.
On the other hand, it depends on what to do with it. If you just surf the Internet and watch movies, then 1080 isn’t too scary, all phones have had this resolution for a long time. If you want to play some toys, then at 1920x1080 the performance will probably drop significantly.
Again, further it rests on the iron. If it has a simple i3 processor and a built-in Intel HD video card, then I would 100% not buy a laptop with a 1080 display. And if there is a small laptop from Razer with an i7/i5 and a video card of the nvidia gtx860-980 level, then feel free to take the best display into the mix.
In general, I would choose this: if for office programs and reading everything on the Internet, I would take x1080, if as a replacement for a daily computer for everything, including all sorts of games and resource-consuming programs, I would stop at x768, but what if it’s a little devil with powerful hardware inside, then 1080 is not a hindrance for him in any case.normaljnij nout proc normaljnij desplay v polne hvataet video karta toljko srednecjok ram normaljno ddr 3 -1333 esli cto so vremenem mozno dobavitj esli malo budet zestkogo v polne hvatatj dolzno tak po parametram normaljnij no vse zaviset ot ceni ja tak ponima ju ti hoces takoj laptop s takimi parametrami sebe vzjatj ese raz povtorjaju ot zeni toze mnogo cego zaviset potomucto cennik tut uze naklevivaetsja ot 400-500 ls where to ja primerno pisu esli cena where to takaja to lutse vzjatj stacionarnij esli ti ese i ljubis igratj to odnoz nacno lutse stacionarnij notebook ne dlja igr. tak cto sam resaj cego hoces bratj .no ja licno bi ne bral eto moe mnenie tak kak ja ne storonnik noutbookov
And the difference between 1024x768 and 1280x1024 will almost not be noticeable to the eye. It will only consume more resources. This is for large monitors, where everything is magnified and the graininess of the image also increases
It would be logical to choose one with a shorter response time. This is critical for rapidly changing dynamic scenes. However, this is not the most important parameter in monitors.
There is also a brightness level, contrast ratio, inputs/outputs, and other parameters.put firewood on the card and monitor
If you duplicate, then unfortunately this will not work, select EXTEND DISPLAY and there will be a second screen for the TV and set the resolution for it separately, then run programs on the first (laptop screen) and move them with the mouse cursor (touchpad) to the second screen (TV).
drivers need to be installed
Try adding a wide screen in the settings, if there is one.
Yes. But in addition to resolution, there is also picture quality, and you can’t simply determine this; you have to watch video samples.
I recommend typing the name of this camera into a YouTube search; if it’s not some terrible Chinese crap, then there will be a video recorded by this camera. Take a look and it will be clear how good the picture is.
Super User Details About TVs
TV resolution - this characteristic was not even thought about in the era of tube TVs. And today, when describing a TV model in a store, the consultant will not forget to emphasize that this is a Full HD TV (if, of course, it is one). So what is Full HD?
The screen of modern televisions (plasma, LCD or LED) is a matrix consisting of many pixels. The number of pixels vertically and horizontally is a value called the resolution of the TV matrix. The most common TV resolutions are 1024x768, 1366x768, 1920x1080.
The television signal also has its own resolution. And it still differs in different parts of the world. The analog signal has three standards: NTSC (used in the USA, resolution 640x480 pixels), PAL and SECAM (used in Europe, resolution 720x576 pixels). This signal may also differ in frame rate: 50 or 60 Hz.
The built-in processor is capable of converting a variety of source signals to the resolution of the TV matrix.
Of course, if the resolution of the source signal and the resolution of the screen matrix corresponded “pixel to pixel”, the picture would be of the highest quality. And so the TV is faced with the task of converting the resolution of the source with a minimum of distortion.
Even at the beginning of the development of television, it became clear that the range of air frequencies allocated for TV broadcasting was small, which greatly limited the number of channels. The way out of this situation was to reduce the frame rate by 2 times. This is how the interlaced signal transmission method appeared. Those. First, the first half-frame is transmitted, which is displayed in odd lines of the frame, and then the second half-frame is transmitted, respectively, it is displayed in even lines.
Progressive scanning, in which the entire frame is displayed (all lines sequentially even after odd), became widespread with the advent of computers. When reading text from the monitor screen, interlaced scanning with flickering lines caused rapid eye fatigue. And in computer monitors, if there is no need to transmit images over long distances, the use of interlaced scanning has become unnecessary.
Modern televisions are capable of displaying images with both progressive and progressive scan.
All these details have been described in order to understand what the resolution of a Full HD TV is. So, Full HD TVs must display images with resolutions that meet high definition standards:
1280x720 pixels and progressive scan (720p)
1920x1080 pixels and interlaced (1080i)
1920x1080 pixels and progressive scan (1080p).
The screen resolution of a Full HD TV must be 1920x1080. These are the most stringent requirements for video signal display.
For HD Ready TVs, which also receive an HD signal, the requirements are softer.
The screen resolution must be at least 720 lines with a widescreen image (16:9) and support the following formats:
1280x720 pixels and progressive scan (720p)
1920x1080 pixels and interlaced (1080i).
Thus, Full HD TVs are ready to receive high-definition television (HDTV) signals. On April 27, 2007, the satellite operator NTV-Plus was the first in Russia to begin showing several channels in HDTV format. Pay television operator Tricolor TV began selling a package including 25 HD channels for 75 rubles on August 1, 2012. per month. Someday, free terrestrial television, which is now actively switching to digital format, will delight us with high-definition television.