How to enter Recovery Mode (Recovery Mode) on any Android device. Types of menu recovery and ways to enable them


How to enter Recovery? Many instructions for upgrading and android firmware required to take action from recovery menu. What this mode is and why you need it, you will learn from this article. What is Recovery (recovery)? Recovery is a special mode android downloads wherein:

  • perform a hard reset of Android data
  • flashing a smartphone
  • get Root rights

How to enter Recovery? The Recovery menu, as a rule, is in all smartphones and tablets from Samsung, but not available in other brands of Android smartphones, but it can be easily added by flashing this section to your Android device.

If the Android smartphone has a Recovery menu and it has not been changed, then it is called STOCK, but if there was not, or third-party Recovery menus were installed, it will be called CUSTOM.

Custom Recovery is mainly of two types CWM and TWRP, less common 4ext,Philz CWM, (different development teams).

How to enter Recovery

ATTENTION! If the Recovery menu is missing or not installed, then it is IMPOSSIBLE to enter it!


Method for Samsung

Before transferring a smartphone or tablet to recovery, disconnect Samsung from charger or USB cable!

New models

Turn off Android and hold Central button + button Volume Up+ button On off

Turn off Android and hold the Center button + Volume Up button + On / Off button

universal way (read below).

For Samsung Galaxy S8 - S9

  1. Squeeze and hold special button Bixby and Volume Up + Power
  2. After the screen saver appears, press the power button, but continue to hold the Bixby button and Volume Up
  3. Hold these buttons until the screen appears. android logo on a blue background
  4. Release the buttons
  5. After a few seconds Galaxy smartphone The S8 will boot into Recovery Mode.


Old models and some tablets

  1. Turn off Android and hold Central button and button On off
  2. Turn off Android and hold down the button Volume Up and button On off

or in a universal way (read below).

Method for HTC

Switch to bootloader mode, then:


If it doesn't work, use universal way(read below).


Method for Google Pixel and Nexus

Turn off Pixel / Nexus and hold down the buttons Volume DOWN + ON/OFFIn the menu, use the volume keys to find the Recovery menu and confirm the selection with the ON / OFF button:

If it doesn't work, use universal way(read below).

Method for SONY

Turn off, turn on and when to appear on the screen logo Sony or when the indicator will light up —Clamp / Press(possible options):

  • Volume DOWN
  • Volume Up
  • Click on the logo
  • Or turn off Sony, Hold down the "Power" button, wait for a couple of vibrations, release the power button and hold down the "Volume Up" button

universal way(read below).

For certain Motorola and Lenovo models

  • Turn off Android
  • Hold down the "Volume Up" + "Volume Down" + "Power" buttons at the same time

For other versions of Motorola and Lenovo - turn off Android and hold "Volume down" + "Power"

If you can't use universal way(read below).

Universal way for all Android devicesusing a PC and ADB tools

(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung, Motorola and others, provided that recovery is available in this device)

Adb Run Program - Method 1

Using the site's proprietary program Adb Run (do not forget to enable USB Debugging)


ADB RUN working window

From the command line - Method 2

Another option is how to get into the Recovery menu, using standard ADB tools and adb programs RUN:

Connect Android to PC and type command adb reboot recovery

Example in ADB RUN:

From the command line - Method 3

As practice shows, on some devices (more specifically, LG), it is not possible to transfer an Android device using the command adb reboot recovery , in which case you should use the following command

adb shell

reboot recovery

There is also a command to switch to Recovery mode for LG, you need to enter the command

adb reboot --bnr_recovery

After that, the device will restart in a few seconds!

Universal method from the installed terminal with Root rights

(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung and others provided that recovery is available in this device)

  1. Download and install from google store play app terminal;
  2. Go to the newly installed application;
  3. Dial following commands:
    su
    reboot recovery
  4. After a couple of seconds, Android will start to reboot.

Management in the Recovery menu

Volume keys Up and down- move through the menu Key On off— select an item in the menu. There are Android devices in which no keyvolume, in that case you will need OTG cable and computer mouse. As soon as you start putting Android into Recovery mode, connect your mouse.

This article is over. If you do not know how to use and what items in Recovery are responsible for, then read the article

  • If you encounter errors while installing the update - Status CWM

That's all! There is nothing difficult! Read more different articles and instructions in the section. Stay with the site, it will be even more interesting!

Once again, let's talk about the Recovery menu, since almost always the instructions for flashing and upgrading Android provide for the performance of certain actions from the Recovery menu.

What is recovery?

Recovery (recovery) or translated from English - Recovery Mode is a special device boot mode with which you can restore the system or install updates. This is emergency mode required to restore the working state of the mobile device in the event of program failures, which resulted in the device turning off and the inability to boot it into normal mode.

With the Recovery mode, you can:

  1. Reboot your tablet or smartphone.
  2. Reset settings.
  3. Install updates.
  4. Configure and install firmware.
  5. Get Root rights.
  6. Delete your personal data in the system.
  7. Restore the operating system and much more.

Remember that incorrect actions can harm the system. If your tablet has important information, it is better to save it on another device in advance.

Before using the recovery mode, carefully read the instructions. Each tablet service menu different from others, so the question of how to enter the Recovery menu on a tablet requires an individual approach.

How to enter Recovery?

The Recovery mode in each mobile device is visually different, but the login process is almost always carried out according to the same principle. In order to enter the Recovery system, you need to do a number of actions:

1. Turn off your tablet. At the same time, make sure that the battery is fully charged or connect the tablet to the network.

2. Switch to Recovery mode by pressing a combination of some buttons. Insofar as different manufacturers tablets offer different hotkey combinations, we will give some of the most common key combinations for entering the recovery menu.

The main key combinations for entering the Recovery:

  • Simultaneously holding down both the "volume" keys and the "power" key;
  • simultaneously pressing one of the "volume" keys and the "power" key;
  • simultaneously hold down one of the volume buttons, the Home button and turn on the device.

The buttons are held until the recovery mode appears on the display.

On some Chinese devices there is no Recovery mode. In this case, you will have to reflash the tablet.

How to navigate the Recovery menu?

Most devices allow you to navigate through the menu items using the volume buttons. The power button serves as a choice of the desired menu item. Some devices may use other keys.

If the control is touch, then we move through the points and select the desired item by pressing your finger.

How to enter Recovery if there are no volume keys on the tablet?

If your tablet does not have volume keys, try the following tips:

1. You can try to log in desired mode by pressing the power and home buttons at the same time. Another option is to hold down the Home key, press the power button, and release the Home key. After the splash screen appears, press the Home button again.

2. You can navigate through the menu by connecting USB keyboard through OTG cable or using a sensor.

recovery mode allows you to access a number of additional features that you have on your Android smartphone or tablet. For example, you can manually set system updates, wipe data/factory reset or delete partition cache. If you have custom recovery installed on your phone, then you will get even more options like installing custom images or even fine tuning devices with various system tweaks.

You can enter Recovery Mode different ways. We prefer radical method by running the ADB command through the computer, but you can do everything much easier. In principle, it is enough for you to know the special combination of buttons specifically for your device (for example, “Sound up” + Power). If you know her, then you can use a special application.

Method 1: How to Enter Recovery Mode Using Android App [Root Required]

In this way we will set special application, which initiates Fast passage into Recovery Mode. It's very simple.

Attention! The method only works if you have Root rights. If you do not know what it is, it is better to use method 2.

Step 1- Download the app from the store Google Play and install it.

Step 2- Open the application, where you will see 4 possible actions: recovery (Recovery), bootloader (Bootloader), reboot (Restart) and shutdown (Shutdown).

Step 3- Click on Recovery, after which the phone will reboot and automatically enter Recovery Mode.

It's simple, right? This is the easiest way, unless of course you know the correct combination of buttons to enter Recovery Mode for your particular device.

Method 2: How to enter Recovery Mode using ADB

Another way to get into recovery mode. Use this method if you don't know the special key combination or don't have Root access, which is needed for the first method.

Step 1- Make sure you have Fastboot installed and properly configured on your computer. (how to configure them is a topic for a separate article)

Step 2- Connect your Android device to your computer with a USB cable and install ADB drivers if necessary.

Step 3- Go to folder android-sdk-windows\platform-tools and open Command Prompt (Shift + Right Click anywhere in the folder -> Open Command Prompt)

Step 4- Type the command "adb reboot recovery" (without quotes) and press Enter.

Step 5- Your device will turn off and then boot into Recovery Mode. Moving up and down is done with the volume buttons.

After buying a tablet or smartphone, many begin to study its functionality along with instructions, in which the term Recovery Mode is often found (recovery mode). Let's try to figure out what kind of mode it is and why you need Recovery Mode in your Android device.

As a rule, developers or engineers use recovery mode. Its main purpose is to install and configure custom (factory) firmware, create or use full copy operating system(including all information and settings of the smartphone). Also, sometimes Recovery is used to completely reset the settings to factory values.

Remember, using Recovey Mode on an Android system does not void your smartphone's warranty. Entering Android recovery mode dangerous procedure, and this is within the power of even completely “green” users.

How to enter recovery mode (recovery mode)?

visual entrance to this mode may differ, but the principle is the same on all smartphones. And so for this you need:

1. Turn off your smartphone;

2. Hold down the volume control key (increase);
3. Do not release the volume, hold down the Home key;
4. Without releasing the two previous keys, press the power on;
5. Wait for the android to load in recovery mode.

How to Use Recovery Mode in Android

In Recovery Mode, navigation (movement) through the menu is done using the volume control buttons (up / down) and confirmation (Home) or the power key.

As a rule, this mode is different for many manufacturers, but the main content is always present:

apply sdcard:file.zip - the file.zip file is installed, which must first be uploaded to /mnt/sdcard/file.zip;
wipe data/factory reset - the data and cache partitions are cleared internal memory device, as well as cleaning system folder android_secure. Cleansing means removing all installed applications and the system settings are reset;
wipe cache partition- the cache section is cleaned (the section in which applications store their information).

06.08.2018

How to enter Recovery? Many instructions for upgrading and flashing Android require you to perform actions from the Recovery menu. What this mode is and why you need it, you will learn from this article. What is Recovery (recovery)? Recovery is a special Android boot mode in which:

  • perform a hard reset of Android data
  • flashing a smartphone
  • get Root rights

How to enter Recovery? The Recovery menu is usually found in all smartphones and tablets from Samsung, but not available in other brands of Android smartphones, but it can be easily added by flashing this section to your Android device.

Connect Android to PC and type command adb reboot recovery

Example in ADB RUN:

From the command line - Method 3

As practice shows, on some devices (more specifically, LG), it is not possible to transfer an Android device using the command adb reboot recovery , in which case you should use the following command

adb shell

reboot recovery

There is also a command to switch to Recovery mode for LG, you need to enter the command

adb reboot --bnr_recovery

After that, the device will restart in a few seconds!

Universal method from the installed terminal with Root rights

(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung and others, provided that recovery is available in this device)

  1. Download and install the Terminal application from the Google Play store;
  2. Go to the newly installed application;
  3. Type the following commands:
    su
    reboot recovery
  4. After a couple of seconds, Android will start to reboot.

Management in the Recovery menu

Volume keys Up and down- menu navigation Key On off- select an item in the menu. There are Android devices in which no keyvolume, in that case you will need OTG cable and computer mouse. As soon as you start putting Android into Recovery mode, connect your mouse.

This article is over. If you do not know how to use and what items in Recovery are responsible for, then read the article

  • If you encounter errors while installing the update - Status CWM

That's all! There is nothing difficult! Read more different articles and instructions in the section. Stay with the site, it will be even more interesting!

The Recovery menu is a special service mode of the Android mobile system. Available on all smartphones and tablets. It is used to launch if the user wants to quickly clear all information in the device, restore factory settings, change the firmware, and also in some other situations.

In the event that the Recovery on the device has never been changed, it is called STOCK. If this menu was flashed, then it is already called CUSTOM.

Among custom recovery, CWM and TWRP are considered the most popular due to their functionality.

To enter the recovery menu on a turned off device, use special combination pressing HOME, POWER, VOLUME+ and VOLUME-. In this case, on different devices you need to use different of these buttons.

Below in the article you can find a way for your device. By the way, there are special programs for launching this menu. One of the most convenient, called Quick Boot, we will consider here.

A universal way to enter the recovery on Android

Today, for many models from different manufacturers, the same key combination is suitable. Therefore, it makes sense to consider this method in the first place. Perhaps it can be called a universal way.

The procedure is as follows:

  1. Turn off your Android smartphone or tablet.
  2. Press the power button and then short press the volume up knob.
  3. The device will go into Recovery.
  1. With the device turned on, hold down the on/off button for a few seconds.
  2. A menu will appear on the screen with some parameters, where there may be a “Go to recovery” button or something like that.

If on your Android these key combinations do not lead to desired result then see below possible combinations specifically for each popular line of devices. For all other devices, one of the universal options described above is suitable.

Recovery on Samsung

If you have a popular device Galaxy line Samsung Electronics, then one of the following methods will suit you. Keep in mind that all key combinations apply when the smartphone or tablet is turned off.

Recovery on Sony Xperia

If you are the owner of a device from the Sony Xperia line, then turn off the device, and then turn it on and when the indicator lights up or the SONY logo appears on the screen, hold down the volume down or volume up key. On some models, there is also a click on the logo.

This option is also possible: turn off the device, hold down the power button and wait for a few vibrations, then release the ON / OFF button and quickly hold down the “Volume +”.

Recovery on HTC

First of all, the user needs to switch to Bootloader mode. In most cases, the battery is removed and reinstalled for this:


Recovery on Nexus

With the device turned off, hold down the following key combination: volume down and on / off (power).

Now find the Recovery item and go to it by pressing the power button.

We go into recovery using the Quick Boot application

There are also special programs, which help you go to Recovery with one touch of your finger. The procedure in this case is not at all complicated. Just open the Play Market, search for the application and install it. I decided to introduce you to one of the most convenient called Quick Boot.

After installation and launch, select the Recovery item in the program menu.

The device will successfully reboot into Recovery mode, and you will be able to continue working with the partitions that you need, depending on the task. For example, if you need to restore all factory settings on your device, you will work with the section Wipe data (factory reset), the Apply update from section is used to update the firmware, etc.

How to work in the recovery menu

Navigation here is done by pressing the side volume up and down keys. The on/off button is briefly pressed to confirm the selected option.

Tip: If you're not sure what you're doing, don't experiment with this menu because the consequences will be irreversible. Android mobile devices, unlike PCs, will not issue warnings about possible problems.

What's in the recovery menu

This menu contains the following sections:

  1. Reboot system. When you click on this item, Android will reboot in normal mode. In case you just logged into Recovery out of curiosity, use this command to exit.
  2. Apply update from . This section is used to update the installed firmware from the existing distribution, install patches, etc. In this section, you can select the type of update from the following list:
    1) Internal storage - from an existing option, including from system memory, file storage, memory cards;
    2) External storage - from some external device;
    3) Cache - from the internal system cache.
  3. Backup/Restore . Each device stores a backup image of the system. Clicking on this item will start recovery from this image. That is, the system will be completely updated to the state in which it was after the purchase.
  4. Wipe cache partition. The contents of the system cache will be completely deleted.
  5. Wipe data|Factory reset . Selecting this item allows you to reset all settings made by the user for the entire period of operation. The device will completely return to the preset factory settings. Please note that during the reset process, all information entered and saved by the user will be lost. Including all files, folders, music, videos, etc. However, the speed of the tablet usually increases by an order of magnitude after resetting the settings.

Once again, let's talk about the Recovery menu, since almost always the instructions for flashing and upgrading Android provide for the performance of certain actions from the Recovery menu.

What is recovery?

Recovery (recovery) or translated from English - Recovery Mode is a special device boot mode with which you can restore the system or install updates. This is an emergency mode necessary to restore the working state of the mobile device in the event of program failures, which resulted in the device turning off and the inability to boot it in normal mode.


With the Recovery mode, you can:

  1. Reboot your tablet or smartphone.
  2. Reset settings.
  3. Install updates.
  4. Configure and install firmware.
  5. Get Root rights.
  6. Delete your personal data in the system.
  7. Restore the operating system and much more.

Remember that incorrect actions can harm the system. If important information is recorded on your tablet, it is better to save it on another device in advance.

Before using the recovery mode, carefully read the instructions. Each tablet has a different service menu, so the question of how to enter the Recovery menu on a tablet requires an individual approach.

How to enter Recovery?

The Recovery mode in each mobile device is visually different, but the login process is almost always carried out according to the same principle. In order to enter the Recovery system, you need to do a number of actions:

1. Turn off your tablet. At the same time, make sure that the battery is fully charged or connect the tablet to the network.

2. Switch to Recovery mode by pressing a combination of some buttons. Since different tablet manufacturers offer different hotkey combinations, we will give some of the most common key combinations for entering the recovery menu.

The main key combinations for entering the Recovery:

  • Simultaneously holding down both the "volume" keys and the "power" key;
  • simultaneously pressing one of the "volume" keys and the "power" key;
  • simultaneously hold down one of the volume buttons, the Home button and turn on the device.

The buttons are held until the recovery mode appears on the display.

On some Chinese devices there is no Recovery mode. In this case, you will have to reflash the tablet.

How to navigate the Recovery menu?

Most devices allow you to navigate through the menu items using the volume buttons. The power button serves as a choice of the desired menu item. Some devices may use other keys.

If the control is touch, then we move through the points and select the desired item by pressing your finger.

How to enter Recovery if there are no volume keys on the tablet?

If your tablet does not have volume keys, try the following tips:

1. You can try to enter the desired mode by holding down the power and Home buttons at the same time. Another option is to hold down the Home key, press the power button, and release the Home key. After the splash screen appears, press the Home button again.

2. You can navigate through the menu by connecting a USB keyboard via an OTG cable or using a sensor.

As you know, the Android operating system provides the user with a huge functionality, using which he can realize the full potential of his smartphone. Starting from advanced settings using the engineering menu and ending with a full factory reset using Android System Recovery 3e. What to do in this menu with a smartphone, you will learn from this article.

This setting mode was designed to work with system files and system settings. With it, you can activate or block almost all the functions of an Android device. Here you can perform such complex manipulations as complete cleaning or system restore in just a couple of clicks. Due to the fact that this menu plays an important role, getting into it is not so easy, but more on that below. In order not to harm your device, you need to know the mode items, their meaning in Android System Recovery 3e and what to do to carry out certain actions.

Launch Android System Recovery 3e

As mentioned above, launching this menu is not so easy. To get here:

  1. Turn off the gadget;
  2. Simultaneously hold down the volume rocker, the home button and the power key.

After a few seconds, the Android logo will appear on the screen, and then the Android System Recovery 3e menu will start. What to do in it, and what values ​​the menu items have - we'll talk about this later.

Assigning items in the mode

The very first and most important point– Reboot. It allows the user to restart the device.
To use the device's memory card as external drive connected via USB, select Toggle USB strage.
There is also work with the CWM package. It is used to install native Recovery on the device.

Selecting "Instal from sdcard" ( installing CWM from a memory card), you will find yourself in a subsection with the following items:

  1. Installation CWM Recovery, which is preloaded on the memory card - Choose zip from sdcard;
  2. Check md5sum sum – Check md5sum a file;
  3. Find out the signature of the CWM package - Toggle Signature Verification;
  4. You can check CWM for compatibility with the device by clicking on Toggle Sclipt Assert.

How to use Android System Recovery 3e for flashing, what to do on Lenovo or other gadgets? Use only proven features that you understand!

  1. Reset all smartphone data - Wipe data / factory reset;
  2. Wipe Cache allows you to completely clear the cache;
  3. Wipe dalvik cache is used to clear the Dalvik cache;
  4. To clear your battery usage history, use Wipe battery stat;
  5. Format System completely removes all system files;
  6. Format Date formats the data section;
  7. Format cache deletes the cache data, but the files themselves remain in it;
  8. Clearing cache core data - Format boot;
  9. To completely format the device, use Wipe all partitions.

By the way, how to use Android System Recovery 3e, what if the tablet is your device? All the values ​​of the menu items that we are talking about are completely identical for all gadgets under Android control.

  1. The next section is one of the most important. Backup/Restore is responsible for backing up and restoring data. It contains items:
  2. Backup creates a backup copy of the data;
  3. Restore is used to restore the factory firmware;
  4. Advance Restore is used to restore separate sections data;
  5. Advanced Backup can be used to copy partitions.

The next item is responsible for converting formats in Android System Recovery 3e, what should I do in this menu? Here you can choose different kinds converting to EXT4 and EXT3. Here's what this section allows you to do:

  1. Convert/change a backup converts the device system;
  2. Use Convert Data to convert data;
  3. Change one of you backup is used to translate backup sections;
  4. Convert Cache converts the cache;
  5. Wipe data/factory reset is used to convert all partitions;
  6. System - format system, on the contrary - format data; cache - format cache.

Extra menu


In the Advanced section, you can do the following actions using these commands:

  1. File System Check checks the validation of system files;
  2. Print Partition Info displays log information;
  3. Copy recovery.log to sdcard is used to save copies of the recovery log;
  4. Opening ext and ext2 formats on an SD memory card– Partition SD Card;
  5. No - save my fat32 partition! stops partitions;
  6. Use Fix Permission to fix permissions in /data/data.

And, finally, the last item of the Power Menu. It is used for power management:

  1. Reboot Recovery reboots;
  2. In Bootloader mode, use Reboot into Bootloader;
  3. A simple reboot is done using Reboot;
  4. Power Off - ordinary shutdown.

Thus, using this menu, you can great amount features that are not available in visual settings. If you have any questions, you can always ask them in the comments!

Android System Recovery 3e is one of the mobile features valued by device users. The main purpose of the specialized android tools System Recovery 3e is a device file cleanup and recovery. Carefully studying everything available opportunities this function, you can be sure that its demand is fully justified.

Brief description of Android System Recovery 3e

Activation of a special settings mode implies a quick and successful solution of the task. So, you need to turn off the smartphone, then hold down the keys to adjust the volume, home button and an on/off button. Only after the user holds three buttons at the same time for a while, a special menu can be seen.

System Recovery is a diverse menu that is ideal for solving any existing issues. Mobile phone users will be able to successfully move through all the items, knowing what they mean. In each case, a special approach to solving existing problems is assumed:

  • Check md5sum a file - check the md5sum file;
  • Toggle Signature Verification - verification of the signature of the CWM package;
  • Toggle Sclipt Assert - checks the package for compatibility with a mobile phone.

    • System Recovery allows you not only to successfully restore a mobile device, but also to use additional available features.

    What features does System Recovery have?

    Thinking about what android system recovery 3e is, you need to understand what to do, so it is advisable to carefully study all the available functions and make sure that the Recovery system is optimally functional.

    1. Install - installation, kernels, system utilities using special file. It is supposed to use zip-archives with a special structure and utility.
    2. Backup/restore is one of the most important components for creating an operating system backup. It should be noted that full backups are recommended.
    3. Wipe / format - cleaning and formatting segments of used internal memory. Most often, a simple wipe is sufficient, but formatting is occasionally used.
    4. Mount - mount different partitions mobile phone. This is required during installation. new modification operating system.

    Carefully studying the capabilities of the Android operating system, it can be noted high level functionality and feasibility of having System Recovery.
    

    2022 gtavrl.ru.