How to delete recovery partition. Flashing, replacing system files, installing updates, modifications on Android devices using TWRP

Surely any user of Windows operating systems knows that in the event of unexpected critical failures, their functionality can be restored. The section is responsible for this Windows recovery, which stores the files needed to perform such a procedure. However, they take up quite a lot of hard drive space (sometimes up to 15 GB, as in Windows 8). This is especially noticeable on small-capacity hard drives. And many, quite rightly, are beginning to wonder about freeing up space, which is occupied by the notorious recovery section.

How to remove it and whether it can be done at all, we will consider further. But I would like to immediately warn all users that when performing this procedure you will have to, as they say, sweat, and such actions should be performed only at your own peril and risk.

What is a recovery partition and is it necessary?

The partition itself, as is already clear, is reserved space on the hard drive, moreover, in the system partition where the installed OS is located.

As a rule, depending on the modification of the system, its size may vary, but usually it is approximately 300-500 MB. The Recovery folder is located here, which contains a WindowsRE directory with a Winre.wim image embedded in it. It also seems completely logical that all this is hidden from the user’s eyes, so that he does not accidentally (or intentionally) delete the necessary recovery tools.

But the matter does not stop there. There are two more hidden partitions on the disk, the existence of which the user does not even know. This system partition EFI with a volume of about 100 MB and an MSR partition of 128 MB in size responsible for GPT markup. Thus, for example, the question of how to remove the recovery partition in Windows 10 comes down to removing the system disk not one, but three sections to fit into the available space.

It must be said that not all users realize that system recovery tools can also be found on installation media, and on special disks for rolling back and eliminating system errors. Therefore, in some cases, you can not only hide the recovery partition, but also delete it, as they say, without a twinge of conscience. Several methods can be proposed for this.

Will reinstalling delete the recovery partition?

First, a few words about repeating. Some users naively believe that reinstalling Windows 10 or any other modification with full formatting system disk will also destroy the above partitions.

Nothing like this! Yes, at the stage of selecting a disk for installing the OS, absolutely all partitions will be displayed, and formatting will actually combine them into one. But in a “clean” system, which the user receives immediately after installation, automatic system recovery is activated by default, so the OS itself, whether you like it or not, again reserves space on the hard drive, where it writes necessary information At once.

Recovery partition: how to delete via command line?

So, let's start with the most difficult, but absolutely effective method, which involves the use command console(cmd), which must be run with administrator rights.

But before that you need to do a few things simple actions. First you need to create a recovery disk. If the “Recovery” menu is used in the “Control Panel”, you will need a flash drive; if the backup and recovery section is used, you will need optical media. A flash drive with a capacity of 64 GB or higher is convenient because it can be loaded with full data from the recovery partition itself (but more on that later).

Next, the solution to the problem of how to remove the recovery partition from the hard drive is to select the line in the update and security menu, which is located in the settings section special options download (for Windows 10) or install removable media as the first boot device in the BIOS.

After the restart, at the beginning of the installation operating system the combination Shift + F10 calls up the command line, in which you write sequentially following commands:

• diskpart;
• lis dis (list of all partitions);
• sel dis 0 (select a drive with the installed OS);
• lis par (view sections);
• sel par 1 (select first section);
• del par override (deleting the first partition);
• sel par 2 (select second section);
• del par override (deleting the second partition);
• sel par 3 (select the third section);
• del par override (deleting the third partition);
• create par efi size=100 (creates an encrypted EFI partition with a size of 100 MB);
• create par msr size=128 (creates an MSR partition with a size of 128 MB);
• lis vol (view sections);
• exit (exit diskpart);
• bcdboot C:\Windows (installation of boot partition);
• exit (complete exit from the console).

Disk management using AOMEI program

The reboot field should, for ease of further operations, use the AOMEI application, select the disk to which you want to attach the space, and then use the resize/move line in the menu on the left side.

Next, you select moving the partition, and drag the slider to the limit (to completely allocate all the space for drive C. Be sure to pay attention that after such actions there are zeros on the “Unallocated space before” line.

Click “OK” and “Apply”. In the window of pending operations that appears, click the go button, after which you need to agree with the instructions in the message. After this, a black space freeing mode window will appear. Once the process is complete, the recovery partition will be deleted and the free space will be added to the system partition.

Method for Windows 8 and higher

Now about how to delete the recovery partition in Windows versions 8 and higher (in the seventh modification and lower, this solution does not work).

Remember, we were talking about creating at the first stage bootable flash drive? So, if you check the box next to the backup line, the entire section, user files and programs can be transferred to this particular medium. True, this may even require several hours and a flash drive larger than 64 GB.

But at the end of the process, the system itself will offer to delete the desired recovery partition. We agree and immediately see how much space is freed up.

Conclusion

It remains to be said that deleting the desired partition is advisable only in cases where recovery in any situation is planned to be carried out exclusively from removable media, which must be created in advance. If for some reason it is not at hand, the system will be rolled back even in factory condition Without reinstallation it will be absolutely impossible.

Those who daily use a tablet or smartphone based on the Android OS often want more functionality than is provided with the purchase. To do this, you need to get root rights (access to administrator rights), install custom firmware, install another loading animation and much more.

When a user studies information on changing his device, he often comes across a mention of a modified recovery, which is usually called ClockworkMod Recovery or TWRP Recovery. General concept about modrekaveri and you can find it in other articles, but here we will take a closer look at another known type modified factory menu, namely with TWRP Recovery, which was developed by Teamwin.

Before we touch on learning TWRP features Recovery in more detail, it should be noted that in comparison with ClockworkMod there are a number of features due to which many users prefer to use TWRP:
- The ability to fully use the touchscreen to control mod recovery functions;
- more flexible configuration of a number of options;
- support for installing multiple zip files at once;
- a detailed menu for selecting what needs to be saved in backup copies;
- the ability to use the S-Pen on Galaxy Note tablets;
- Screen lock and sleep mode using the power button.

User guide for working with TWRP Recovery mod recovery
1. general information about TWRP
2. Installing TWRP Recovery
3. How to get to the TWRP Recovery menu
4. Detailed examination of the main functions in the TWRP Recovery menu
5. Flashing, replacing system files, installing updates, modifications to Android devices at TWRP help

What is TWRP Recovery

Let's get acquainted with what TWRP Recovery is.
Compared to the standard factory menu, TWRP Recovery has a much larger number of functions available to the user. Using it, you can save a complete snapshot of the system, install non-standard software, other firmware, replace the OS kernel, restore the system from a backup, and many other options are available. TWRP is written to a special section of the internal memory of the phone or tablet, replacing the factory recovery.
Often, in a number of seemingly hopeless situations, TWRP Recovery can come to the rescue. Despite the fact that the phone may stop booting, it is not uncommon that by using TWRP, you can completely restore the device’s functionality from a backup copy, saving all settings, programs and their settings.

Here is a short list of the main features of TWRP Recovery:
- Installation of alternative (custom) firmware, or kernels;
- Installing system updates, patches, making adjustments to the gadget’s functions;
- Creating a full backup of the system or its individual parts (application data, system partition, cache, settings);
- Connection via USB cord to a computer as a removable storage device;
- Recovery previous state systems from a previously saved backup copy;
- Editing partitions on the memory card (creating, formatting, deleting);
- Possibility of resetting to factory settings (Wipe - data/factory reset). You can delete only part of the data instead full reset to the original state: deleting battery statistics (wipe battery stats), clearing cache (wipe cache), erasing Dalvik-cache (wipe Dalvik-cache);
- Use as a terminal to execute commands;
- Ability to work with system files on a tablet or phone.

Installing TWRP Recovery

It doesn't take much effort to install TWRP Recovery on most devices. If installed from Google Play app GooManager, then you can use the “Install OpenRecovery Script” function in its menu.

Many Android gadgets, such as Nexus smartphones and tablets, have specially designed programs such as Google Nexus 7 Toolkit, where there is a function for installing a modified recovery. In addition, using the adb program, you can also install TWRP Recovery.

How to get into TWRP Recovery

In order to enter the modified recovery menu, you can use several methods:
1. By pressing a special combination of buttons when turning on the gadget. The combination may vary for different Android device models. For example, on a number of devices you can get into recovery by holding down the volume up key and the power button at the same time while turning it on.
2. Taking advantage specialized program like GooManager ioi Titanium Backup, which allow you to select the download function in your menu Recovery mode, item "Reboot Recovery".
3. If the appropriate drivers for the gadget are installed on the PC and the connection is configured using ADB programs(so-called ADB shell), then by connecting a cable from the computer to the USB device, you can run the command:

adb reboot recovery

Basic functions and menus of TWRP Recovery

After booting your phone or tablet into TWRP Recovery, you will first be taken to the main menu.

This manual discusses the functions and capabilities of TWRP Recovery version 2.3.2, which is the most current at the time of writing. Other versions of TWRP may have a slightly different interface, but the main functionality will remain the same as in the version we are considering.

The appearance of TWRP recovery may also differ slightly, depending on specific device and the selected design theme.
Since TWRP recovery supports touch controls, selecting the desired menu items and navigating through them is very simple - it’s enough, just like with normal use gadget, click on the element we need with your finger.
If you want to return to the previous menu, then in each submenu there is a return button at the bottom (phone) or top right (tablet) of the display. Also shown at the top is the battery charge percentage and the current time.

Functions of the main menu items:
1. Install

Used to install firmware, patches and modifications.
This is one of the most used features of TWRP Recovery.
Using this option, you can install custom (unofficial), official firmware, programs into the system partition, replace kernels, change bootanimation, themes, and more. Updates are installed from files located anywhere on the device’s memory card, in zip format.
By selecting required file, a menu opens where you can add the next update. In this way, you can create a queue through which patches will be installed (Add More Zips item). After the necessary files are selected, you need to start flashing the firmware by dragging the slider located at the bottom of the display from the left side to the right.

The Zip Signature verifications feature can enable verification of the digital signature of zip files.
Using the Force MD5 check on all Zips item, you can check installed updates for compliance with MD5 checksums.

2. Wipe Clear and delete data menu

In this section it is possible to clear the phone's memory, like returning to factory settings completely ( Factory Reset), and by choosing to cleanse only a certain part of it, as a systemic System section, cache (Cache), or Dalvilk Cache. After using Factory Reset device will return to the condition in which it came from the factory.
In addition, it is possible to clear internal memory(Internal Storage) or external SD card (External Storage), clear the folder where installed on external media program (android_secure) or reset the battery statistics counter (Wipe Battery Stats).
Similar to other executable functions, you can confirm your choice using the slider that appears at the bottom of the display. You can cancel tasks by tapping the "Back" button.

3.Backup Data or system backup section

This is one of the most important points in a modified recovery. Here you can backup the entire system of your phone or tablet, including application data and device installations - Nandroid Backup.

In this section you can:
- Select the parts of memory that you want to reserve: Data, System, Recovery, Boot, Uboot, Cache, NVram;
- Look at the available amount of memory space (Free Space);
- Disable the creation of checksums in backup files (Skip MD5 generation during backup);
- Activate compression of backup files (Enable Compression);
- Select the internal memory of the device to save backup data (Use internal storage);
- Choose external card memory for saving backup files (Use external SD);
- Update information on free memory in sections (Refresh Sizes);
- Set Backup name.
Just as before, you can activate the launch of the functions you have chosen using the slider, after which the progress of the operation will be shown.

When the process is complete, you can reboot the gadget using the Reboot System option, or return to the TWRP main menu using the arrow.

4.Restore Menu for restoring parts or the entire system from a previously created backup

This section provides the following options:
- selecting the device’s internal memory as the place where backups will be searched (Use internal storage);
- set an external memory card as a partition where recovery will look for backup (Use external SD).
If you did not change the settings when creating a backup, then by default the names of backup copies are composed of the number and time of creation. Files can be sorted in the following ways:
- in ascending (Sort Ascending) or descending (Sort Descending) order of creation date;
- increasing or decreasing the size of backup copies.

When the required backup is found, the following selection of functions is provided:
- mark those partitions that need to be restored (Data, System, Recovery, Boot, Uboot, Cache, NVram);
- delete this backup copy (Delete Backup);
- give a different name to the selected backup (Rename Backup);
- enable checking of MD5 checksums in backup files.

Start performing the selected operation by confirming your choice using the slider at the bottom of the screen.

5.Mount

Here you can mount and unmount partitions and perform operations on them. When mounted, the data contained on the partition becomes accessible.

This section contains functions:
- Mounting, unmounting the system partition (Mount/Unmount System);
- Mounting, unmounting the cache partition (Mount/Unmount Cache);
- Mounting, unmounting the data partition (Mount/Unmount Data);
- Mounting, unmounting internal memory (Mount/Unmount Internal);
- Mounting, unmounting external card memory (Mount/Unmount Sdcard);
- Connecting the device to a PC as a storage device (Mount USB storage). Here you can connect an SD card to your PC (Use external SD) or the gadget’s built-in memory (Use internal storage).

6.Settings Modified recovery settings

Here you can set the settings that TWRP Recovery will use by default when performing functions:
- Enable/disable verification of the digital signature of installed files (Zip file signature verification);
- Enable/disable checksum checking for any zip files (Force MD5 check for all zips);
- Erasing files instead of formatting during memory clearing (Use rm -rf instead of formatting);
- Ignore errors in file sizes when performing backup(Ignore image size errors during backup);
- Do not create checksums during backup creation (Skip MD5 generation during backup);
- Select your time zone;
- Come back to TWRP installations Recovery by default (Restore Defaults).

7. Advanced Additional options TWRP

Here you can:
- Activate saving the operation log file to the memory card (Copy Log to SD);
- Restore access rights to the original state system folders and files that may be broken by some applications with root privileges. Sometimes access rights violations can lead to crashes and freezes of the tablet or phone (Fix Permissions);
- Change partitions on the memory card (create, delete, create swap cache files). Swap is usually used to speed up Android devices. (Partition SD Card).
Here you can run the following commands: Copy (copy a file), Move (move a file), Chmod 755 (set permissions to 755, which is the default for all system files), Chmod (set other permissions), Delete (delete a file), Rename File (rename file);
- Execute a command entered manually in terminal mode (the same as from a PC using the adb Sshell interface) (Terminal Command).

8.Reboot

Using this item you can reboot the device. Available options:
- reboot into the operating mode of the device (System);
- reboot into recovery;
- turn off your tablet or phone (Power Off).

Flashing, replacing system files, installing updates, modifications on Android devices using TWRP

In order to install another firmware or patch, you will need to copy these files in zip format to a memory card or internal memory.

Next we do the following:
1. Boot into TWRP recovery;
2. Select the "Install" function;
3. Select internal (Use internal storage) or external memory (Use external SD), depending on where we copied the files we need.
4. Find and select the file that needs to be installed.
5. If you have an md5 file along with a Zip, then you can activate the check of amounts (Force MD5 check on all Zips), otherwise we do not do this;
6. Start the installation by dragging the slider from left to right.

You can select 10 zip files at once, which will be installed sequentially. Once the process is complete, the installation is complete.
When the process is completed, it is recommended to clear the cache and dalvik cache.

Instructions

You should know that it is not always possible to restore partitions after they are deleted. If you have formatted the section you need, then most likely 90% of the information on it is irretrievably lost.

If you actually deleted the partition, or it stopped loading for some reason, then special programs will help you. They exist great amount. As an example, let's look at data recovery options using two powerful programs: Acronis Disk Director, Easy Recovery.

The most important rule when accidentally deleting a partition is to not do anything unnecessary. Do not try to format it, create or copy files to it yourself.

So, run Acronis program Disk Director.

Find the View button located on the main toolbar and click on it. Select " Manual mode».

In the list of existing local disks the deleted partition should be visible as "Unallocated Area". Click on it right click mouse, go to the “Advanced” submenu and select “Recovery”.

In the new window, select the “Manual” option and click the “Next” button. The Search Method menu will open. Select "Full" and click "Next".

While searching for deleted partitions, they will be displayed on the screen. Select the one that you recently deleted (you can use the size of the volume as a guide) and click the “Next” button.

Now open the "Operations" tab on the main panel and select "Run". Open the “Pending Operations” menu and click the “Proceed” button.

If any are missing important files, then run Easy program Recovery. Scan this section for her search. deleted files. Most likely, the files will be restored to the folder where they were previously stored.

Related article

Sources:

• disk partition recovery
• Removing the recovery partition on a laptop

Remove unnecessary ones sections possible in several ways. You can combine them into one large section or make them inactive so that you can access them only when absolutely necessary.

You will need

• Paragon Partition Magic, Windows disk 7.

Instructions

Insert the disk containing the Windows 7 operating system installation disk into the drive. Turn on your computer and press the F8 button. When the device selection window appears on the screen, select your DVD drive. Wait for the OS installer to start.

If you plan not to use the area created as a result of deleting partitions, then select the local disk on which the OS will be installed and click “Next”.

If you need to add one large section, then click the “Create” button. Select the file system of the future local disk and set its size. Continue with system installation.

Launch the program. Select "Quick Merge Partitions". Specify sections who will participate in the merger process. If you don't need the information stored on them, format them. This will significantly increase the time spent on merging.

Click the "Apply" button located on top panel program tools. After some time, a window will appear with two options for further actions. Click the "Reboot Now" button. The program will continue to work in DOS mode.

Video on the topic

If you accidentally deleted it on your hard drive, don’t rush to panic. With a 90% probability, the data stored on this partition can be recovered. The main thing is not to take any unnecessary actions.

You will need

• Acronis Disc Director, Easy Recovery.

Instructions

There are many ways to remove hard section disk. In any case, you will need a special program to restore it. Use the available option - Acronis Disk Director.

Download this program from the official website http://www.acronis.ru/homecomputing/products/diskdirector/. Install it on your computer.

Launch the program. Find main panel program management. Open the View tab. Select the “Manual mode” item for the program.

Explore the list existing sections hard drives. Find the volume called "Unallocated Area". Its size should approximately match the size remote partition.

Right-click on it. Open the "Advanced" submenu and select "Recovery".

A new window will open with the title “Recovery Mode”. Select Manual mode and click Next.

The Search Method window will open. Select “Full” and click “Next”. The process of searching for previously existing partitions on this disk will begin.

Highlight the one you recently deleted. Click "Next". Return to the main menu of the program. Open the "Operations" tab and select "Run".

A window with the title “Pending Operations” will open. Check the specified parameters of the partition to be restored and click the “Proceed” button. Execution speed this process depends on the power of your computer.

If some important files were lost during the partition recovery process, install the Easy Recovery program. Start the process of searching for deleted files. Select those you want to restore and click the "Restore Selection" button.

Video on the topic

note

If you formatted the partition after deletion, then most of the information cannot be restored.

Helpful advice

If you deleted the system disk partition, then install the program on another computer and connect your HDD.

Sources:

• how to recover a volume on a hard drive

Many mobile computer manufacturers create a recovery partition when installing an operating system. It is intended for quick recovery the initial state of the Windows OS in the event of a failure.

Anyone who takes the first steps in learning the procedure for flashing Android devices initially pays attention to the most common way to carry out the process - flashing firmware through recovery. Android Recovery– a recovery environment that almost all users of Android devices have access to, regardless of the type and model of the latter. Therefore, the method of flashing firmware through recovery can be considered as the most simple way update, change, restore or completely replace software device

How to flash an Android device using factory recovery

Almost every device running Android OS is equipped by the manufacturer with a special recovery environment that provides, to some extent, ordinary users, the ability to manipulate the internal memory of the device, or more precisely, its sections.

It should be noted that the list of operations that are available through the “native” recovery installed in devices by the manufacturer is very limited. As for the firmware, only official firmware and/or updates are available for installation.

In some cases, through factory recovery, you can install a modified recovery environment (custom recovery), which in turn will expand the capabilities of working with firmware.

At the same time, it is quite possible to carry out the main actions for restoring functionality and updating the software through factory recovery. For installation official firmware or updates distributed in the format *.zip, perform the following steps.

1. To install the firmware, you will need an installation zip package. Download the required file and copy it to the device’s memory card, preferably to the root. You may also need to rename the file before manipulation. In almost all cases, the appropriate name isupdate.zip

2. Boot into the factory recovery environment. Methods to access recovery vary for different device models, but they all involve using combinations of hardware keys on the device. In most cases desired combination - « Volume-» + « Nutrition» .

Press the "" button on the device that is turned off. Volume-" and, holding it, press the " Nutrition" After the device screen turns on, the “ Nutrition"you need to let go, and " Volume-» Continue holding until the recovery environment screen appears.

3. To install the software or its individual components in the memory partitions you will need the recovery main menu item –« apply update from external SD card» , select it.

4. In the list of files and folders that opens, we find the package previously copied to the memory cardupdate.zipand press the selection confirmation key. The installation will begin automatically.

5. Upon completion of copying the files, reboot into Android by selecting the item in recovery« reboot system now» .

How to flash a device through a modified recovery

Modified (custom) recovery environments have a much wider range of capabilities for working with Android devices. One of the first to appear, and today a very common solution, is the recovery from the ClockworkMod team.

Installing CWM Recovery

Since CWM recovery is an unofficial solution, you will need to install a custom recovery environment on your device before use.

1. The official way to install recovery from the ClockworkMod developers is the ROM Manager Android application. Using the program requires root rights on the device.

Load ROM Manager into Play Store or from our website

• Download, install, launch.

• On the main screen, tap " Recovery Setup» , then under the inscription« Install or update recovery» - paragraph « ClockworkMod Recovery» . Scroll through the list of device models that opens and find your device.

• The next screen after selecting a model is the screen with the button « Install ClockworkMod»

• After a short time, the required file will be downloaded completely and the installation process will begin. CWM Recovery. Before you start copying data to the device’s memory section, the program will ask you to grant it root rights. After receiving permission, the process of recording the recovery will continue, and upon completion a message will appear confirming the success of the procedure « Successfully flashed ClockworkMod recovery» .

• The installation process of the modified recovery is completed, press the button " OK» and exit the program.

2. If the device is not supported ROM application Manager or the installation does not proceed correctly, you must use other methods for installing CWM Recovery. Methods applicable to various devices are described in the articles listed below.

• For Samsung devices, in most cases the application is used Odin. More details here - ( Flashing Samsung Android devices using the Odin program)

• For devices built on the MTK hardware platform, the application is used Firmware for Android devices based on MTK via SP FlashTool)
• Most universal method, but at the same time the most dangerous and difficult is flashing recovery via Fastboot . The steps taken to install recovery using this method are described in detail at the link:

Firmware via CWM

Using a modified recovery environment, you can flash not only official updates, but also custom firmware, as well as various components systems represented by crackers, add-ons, improvements, kernels, radio, etc.

It is worth noting that there are a large number of versions of CWM Recovery, so after logging in on different devices you can see a slightly different interface - background, design, touch controls may be present, etc. In addition, some menu items may or may not be present.

The examples below use the most standard version modified CWM recovery.
At the same time, in other modifications of the environment, when flashing the firmware, items are selected that have the same names as in the instructions below, i.e. A slightly different design should not cause concern to the user.

In addition to design, the management of CWM actions differs in different devices. Most devices use the following scheme:

• Hardware key " Volume+» - move one point up;
• Hardware key " Volume-» - move one point down;
• Hardware key " Nutrition" and/or " Home"- confirmation of choice.

So, the firmware.

1. Prepare the zip packages necessary for installation into the device. We download them from Global Network and copy it to the memory card. Some versions of CWM can also use the device's internal memory. Ideally, the files are placed in the root of the memory card and renamed using short, clear names.

2. Enter CWM Recovery. In most cases, the same scheme is used as for entering the factory recovery - pressing a combination of hardware buttons on the switched off device. You can also reboot into the recovery environment from ROM Manager.

3. Before us main screen recovery. Before you start installing packages, in most cases, you need to do " wipe» sections « Cache" And " Data“, - this allows you to avoid many mistakes and problems in the future.

• If you plan to clean only the “ Cache", select the item " wipe cache partition", confirm the deletion of data - item " Yes – Wipe Cache" We wait for the process to complete – the following message will appear at the bottom of the screen: “ Сache wipe complete».

• The section “ Data" Select the item “ wipe data/factory reset", then confirmation " Yes – Wipe all user data" Next, the process of cleaning the partitions will follow and a confirmation message will appear at the bottom of the screen: “ Data wipe complete».

4. Let's move on to the firmware. To install the zip package, select “install zip from sdcard» and confirm your choice by pressing the corresponding hardware key. Then select the item “choose zip from sdcard».

5. A list of folders and files available on the memory card opens. We find the package we need and select it. If the installation files were copied to the root of the memory card, you will have to scroll to the bottom of the list to display them.

6. Before starting the firmware procedure, recovery again requires confirmation of awareness of your own actions and understanding of the irreversibility of the procedure. Select the item “ Yes – Install *** .zip", where *** is the name of the package being flashed.

7. The firmware procedure will begin, accompanied by the appearance of log lines at the bottom of the screen and the filling of the progress bar.

8. After the inscription “ Install from sdcard complete"The firmware can be considered complete. Reboot into Android by selecting “ reboot system now" on the main screen.

Firmware via TWRP Recovery

In addition to the solution from the ClockworkMod developers, there are other modified recovery environments. One of the most functional solutions of this kind is TeamWin Recovery (TWRP). How to flash devices using TWRP is described in the article:

This is how Android devices are flashed through recovery environments. It is necessary to take a balanced approach to the choice of recovery and the method of installing them, and also flash only the appropriate packages obtained from reliable sources into the device. In this case, the process proceeds very quickly and does not cause any problems later.