How to flash a tablet at home. Installing ZIP updates in Fastboot

All tips

When using the tablet for a long time, various freezes, glitches and similar unpleasant things may occur over time. It's all related to the firmware. The tablet firmware is the operating system that controls all the functions of the device. Sometimes it is enough to simply update it periodically using built-in services. However, especially difficult situations associated with spontaneous shutdowns or refusal to turn on require special approach. Here it is advisable to reflash the device using third-party methods.

The flashing process is a complete replacement operating system. Some users prefer to contact specialized services with this issue, but self-flashing is not nearly as difficult as it seems. The most important thing is to adhere to a clear procedure.

Why flash

There can be many reasons why you need to reflash your Tablet PC. The most common is loss of performance. Very often, the firmware installed on devices does not meet all the requirements. Most often this is due to speed and the presence of a huge number of unnecessary programs.

There are two main ways to replace the operating system:

via memory card;
via computer.

In terms of ease of execution, of course, the first method wins, but it is not always feasible.

Before you begin, you need to protect your tablet as much as possible from turning into a completely inoperable device, which is called a “brick.” For this purpose it is created backup copy An OS that can be restored.

Internet offers great amount various firmware for all tablet models. All of them can be divided into official “stock” and custom “custom”. You can choose any one, depending on what functions are required. Of course, the safest ones are official firmware. Not only are they fully error-checked, but they also limit unwanted actions user. In custom ones, it’s often the other way around: all settings are open, and unexpected incidents are much more likely to occur.

All firmware can be downloaded from the website https://4pda.ru/. There are both stock and custom systems with a description of all functions and innovations.

How to properly reflash via memory card

This is the easiest method as it uses the tablet's internal procedures to update the OS. This is done as follows:

The downloaded firmware is sent to the DLOAD folder on the memory card;
Using a few buttons, the device boots into OS installation mode. For tablets different manufacturers combinations may vary, but the power and volume keys are used everywhere. Accurate information should be contained in the instructions for the gadget;
After the above mentioned manipulations, the OS installation process will begin;
As soon as the flashing is completed, you need to reboot the device. The first turn on can take quite a long time, so you will have to be patient.

How to flash through a computer correctly

Firmware via computer

The abundance of Chinese tablets on the market is forcing people to accept Chinese rules as well. One of these rules is Chinese tablet It is impossible to flash through a memory card. This is of course sad, but there are no hopeless situations. In such cases, an update is provided using a program installed on the computer. Unfortunately, there is no universal recipe in this case. Choice the desired program carried out based on what processor is in the tablet.

The most popular programs for installing firmware are:

SP Flash Tool;
Live Suite.

SP Flash Tool is considered the most popular. It is designed for flashing tablets based on MTK processor, which in Lately is getting bigger. Live Suite is aimed at interacting with devices on Allwinner.

And finally, Odin. Oddly enough, but such a digital giant as Samsung has stood on par with the Chinese miracles of technology. Due to the nature of the software and the operation of the devices, tablet PCs from this company also cannot be flashed without outside intervention. For this purpose, they created a specialized Odin program.

The procedure for self-firmware via a computer:

You need to download and install a program that will update the device software;
Install latest drivers to the computer, so that nothing interferes with its interaction with the tablet;
Download firmware;
Unpack it into the desired directory (when using the Flash Tool, it is recommended to unpack it into the installed program directory);
IN running program you need to add firmware files (depending on the program, the procedure may vary, but they all work approximately the same way);
The first file added is always Scatter, which forms a list of other firmware files (in Flash program Tool, its addition is carried out after clicking on “Scatter-loading”);
Next, you should connect the device to the computer via USB and click “Download”;
The firmware should begin, upon completion of which you will need to disconnect the tablet from the computer and then reboot.

It's worth noting that this type of software update may work even if complete absence“signs of life” on the tablet.

All these actions apply to all tablet models and all programs used. Despite the fact that they are different, the order of the firmware is approximately the same. The most important thing is not to deviate from the order, and also try to avoid sudden interruptions in the process. To do this, it is recommended to turn off the third party processes, which may interfere with the firmware. Anyway, independent firmware A tablet is a very dangerous business. You must be aware that there is a possibility of receiving a completely non-working device, or “brick”. In some cases, the “brick” can also be restored, but this requires extra nerves, time and effort.

The abundance of gadgets that people use in Everyday life, inevitably leads to the breakdown of any of them. And since flashing a tablet yourself is a simple matter, everyone is able to carry out some maintenance on their device. However, responsibility for possible problems lies entirely on him. But problems can arise, especially if you do not follow the procedure for updating the software.

IN modern world Mobile devices running various constantly evolving operating systems are becoming increasingly popular. Their development is connected, first of all, with the desire of developers to provide users with comfortable use of the device. Adding new features, improving performance - all this provides comfortable work with a gadget.

However, almost all operating systems installed on smartphones and tablets are not perfect. This is due to the complex structure of the program system and a fairly large number of algorithmic steps included in the operation of the OS, as a result of which errors and so-called bugs arise that prevent a person from comfortably using the device. They can be expressed in the device becoming sluggish in some situations, refusing to open applications, or causing unexplained shutdowns. However, any abnormal behavior of a pocket gadget can be safely considered an error.

How to get rid of errors?

In order to minimize negative aspects in the operation of the device, software developers regularly release updates for their products. This allows users to work comfortably on their tablet or mobile device. Updating the operating system to the latest version is called firmware. However, firmware is not always a software update. As a rule, users resort to it when their device begins to work incorrectly and display a large number of errors.

Usually, greatest number errors in the operation of the operating system occur in tablet computers running Android, which is why many owners faced with this problem have the question: “How to flash a tablet?” This will be discussed below.

What to do if the tablet slows down

Unfortunately, the “braking” of the tablet on the Android operating system is a frequent occurrence. For this reason, for users of such devices, the question of how to flash an Android tablet will be very relevant. There are several ways to perform this operation.

The first way, as many have already guessed, is to take the tablet to service center. Of course, this option will be the most correct, but the cost of such a service will unpleasantly surprise you. As a rule, all the actions performed by the master can be easily repeated at home “on your knees”.

The second most popular option would be to flash the gadget yourself. There is nothing complicated or unusual about this, and if you have any doubts about the official software, it can be easily found and downloaded from the website of the manufacturer of this device.

Flashing tablets

Nowadays, a huge number of portable devices, among which devices occupy a separate niche Chinese manufacturers. Among such devices, gadgets with unstable work operating system, and the question of how to flash a Chinese tablet, due to the growing popularity of these devices, remains extremely relevant.

In general, the firmware of a Chinese gadget is no different from the firmware of any other, and a person who knows how to flash a tablet will not encounter any difficulties along the way. However, this operation also has its own subtleties that need to be understood.

Firmware procedure for a Chinese tablet

To correctly flash the tablet firmware, you will need a card microSD memory, also called TF. You should find a suitable firmware version on the Internet, which can be downloaded either from the manufacturer’s website or from any other thematic resources. The existing memory card must be formatted to FAT32. This is done either on a computer or directly on the tablet, if it is working. Then you need to move the firmware to this memory card and follow the installation instructions. The microSD card is ready. Before flashing a Chinese tablet, the gadget must be fully charged and turned off. Now you can insert the memory card into the device and turn it on. The tablet will automatically start booting from the flash card and update the firmware to the specified version on its own. After the download is complete, you need to remove the memory card and restart the device.

Things to remember

When flashing your tablet, you should remember several important things at once. Firstly, this is the security of the version of the operating system that will be installed on the gadget. The duration of operation of the device and its hardware largely depends on this point, because if the system does not work correctly, this will certainly affect the tablet’s processor. Secondly, before flashing an Android tablet, you need to carefully read the instructions and pay attention to all the subtleties of the operation, because the success of the action depends on this. Thirdly, use only current versions flashing programs. This will ensure the most secure operation of changing the operating system version.

In case of unsuccessful firmware

It happens (Chinese devices are especially susceptible to this) that after updates the tablet does not turn on. How to flash it in this case is a rather complicated question, because nothing will be visible on the screen.

However, despite the difficulty of fixing this problem, service technicians will definitely find a solution. By the way, you should not be afraid of damaging the operating hardware of the tablet - it can be restored using special programs.

Programs for firmware

It was described above how to flash a tablet through a computer. This should be done using special installation programs, which will allow you to correctly write the latest firmware to an SD memory card. Among the most popular and used programs are Odin, RKBathTool and ClockWorkMod. Correct use of these applications will allow the user to install a new version of the OS efficiently.

Firmware for Samsung tablets

One of the most popular brands on the market tablet computers is Samsung. Among other advantages of devices from this company, there are certain disadvantages associated with freezing of the operating system after prolonged use. For this reason, the question of how to flash samsung tablet, often found on forums for those who like to delve into software. Actually, there is nothing complicated about it. So, instructions for the firmware.

Charge your tablet computer up to maximum value batteries and disconnect from the network.
Download official version firmware to your computer.
Download the program for Odin firmware and unzip it to your computer.
Turn off the tablet's power.
You need to enter the “Odin Mode” mode, for which you need to simultaneously hold down the “Down” key on the volume rocker, the “Home” button on the front panel and the lock button, after which a warning message will appear on the screen. Next, you need to release all the pressed keys and, as a confirmation of your consent to enter the bootloader mode, press the "Up" key on the volume rocker. If a green “Android” icon appears in the middle of the screen, it means that the actions were performed correctly. Otherwise, you need to repeat the above instructions.
Launch the Odin program.
Connect your Samsung tablet using a USB cable to your computer.
Next in the program you need to press the PDA key and select the required firmware, the extension of which is either .md5 or .tar.
After completing all the steps, you need to click the “Start” button and wait for the operation to complete.

Now the question of how to flash a tablet doesn’t seem so confusing, because there’s really nothing complicated about it. All software part of the work is performed automatically.

Firmware for Explay tablets

Relatively recently entered the market Russian manufacturer portable equipment Explay. This brand has gained popularity largely due to its MP3 players and tablet computers. Low cost and good reliability have firmly secured the status of “workhorses” for gadgets. The tablets of this company occupy a significant niche in the market. However, like many devices of this type, they have problems with the performance of the operating system at certain moments. That is why it is desirable that every buyer of this gadget knows how to flash an Explay tablet.

In fact, the algorithm can be exactly the same as in previous cases, however, due to the ease of access to the operating part of the tablet, you can flash the firmware directly into the device. To do this you need:

Download the firmware for the tablet to a memory card using any method.
Go to CMW Recovery, select the Wipe Data and Cache operations.
You need to select from the list the required firmware and install it.
Reboot the tablet.

Firmware for Prestigio tablets

The Prestigio brand, founded in Belarus, in last years has firmly established itself in the tablet computer market. One of distinctive features products of this company can be called that latest models were released in the operating room Windows system Phone, which in itself is unusual. However, most gadgets model range equipped with Android system. If the Prestigio Multipad tablet does not work correctly, how to flash such a device? General scheme actions are exactly the same as in previous cases. Let's take a closer look.

To begin with, it should be said that the company is actively engaged in improving devices, so it itself releases firmware versions for its tablets. This makes it much easier to find quality software. So, the procedure for flashing the firmware is:

Download official firmware from the Prestigio website. Please remember that under no circumstances should you install more than old version, otherwise it may damage the device.
In order to start the operation, you need to fully charge the tablet, turn it off and make sure that there is no memory card in the slot.
Then, while holding down the "Down" key on the volume rocker, you need to press Reset button located on the rear panel once. This needs to be done with a needle.
The next step is to connect to your computer. While holding down the "Down" key on the volume rocker, you need to connect the device to the computer using a USB cable and release the key.
Next, you need to go to the device manager on your computer and update the driver for the tablet.
Now you can proceed directly to flashing the tablet firmware. To do this, you need to disconnect the tablet from the computer and run the RKBatchTool program, select the firmware version in it. Then you need to connect the tablet to the computer in the previously described way and click the Upgrade button. The device firmware update will begin; after completion, it must be disconnected from the computer and rebooted.

After we figured out how to flash a Prestigio tablet, you can regularly update it to latest versions offered on the manufacturer's website.

Summarize

As a rule, even an inexperienced user can cope with the firmware of his pocket friend, because there is nothing complicated about it. In order to know how to flash a tablet, you do not need to have programming skills.

Android tablet computers are very popular today and are used by millions of people around the world. Including due to the convenience and versatility of this operating system, which makes it practically irreplaceable and does not yet have worthy analogues. The advantages of Android are very significant: firstly, it is free, and secondly, a huge number of various programs for it, as well as high fault tolerance, reliability and speed. But despite the many advantages, many users sooner or later begin to think about how to flash an Android tablet, and there are reasons for this.

Tablet on Android system, update the firmware to get new features.

Tablet firmware. What it is?

So what is firmware? This concept means the main control program mobile device, and any - tablet, smartphone, electronic player and regular cell phone. home control program or firmware is nothing more than an analogue of a computer’s operating system. That is, everything else works based on the firmware software, installed on the device.

Firmware can be different - very simple, performing only a few functions, or quite complex, representing full-fledged operating systems. Android is one of these complex firmwares.

The first installation of the Android OS on the tablet is carried out at the factory, after which the device goes on sale and after some time reaches its owner. It happens that at the time of purchase the version of the operating system is out of date. That’s why the owner has to puzzle over how to update Android on the tablet.

Why change the firmware?

The need to change the firmware may arise not only for the purpose of installation new version, but also for a number of other reasons, for example:

To expand the functionality of the system - to achieve the ability to install the desired applications, remove some restrictions, for example, on the simultaneous launch of the required number of programs, increase user privileges, etc.
Reinstalling Android on the tablet is also necessary when the system begins to malfunction, “glitch” - in a word, not work as it should.
To improve privacy and security by removing some features. Since it is known that Google system does not disdain elements of espionage on its users - it is capable of sending the device’s GPS coordinates, phone number, IMEI and other user data directly to its servers without the owner’s knowledge.
Changing the firmware also makes it possible to remove pre-installed applications, which the user does not need.
If the tablet was purchased from a foreign online store or abroad, the system may not have the Russian locale. In this case, you just need to think about how to reinstall Android on the tablet. Because there is no other solution to this problem.
Some unofficial firmware can “squeeze more resources” out of hardware devices because they contain modified drivers.
And finally, a row unofficial firmware opens up the possibility to widely modify the design of the system, for example, adding fonts, visual effects and other decorations. Fans of design delights will certainly appreciate such opportunities.

Pros and cons of changing firmware

Based on the goals described above, we can highlight the following advantages of updating the firmware: first of all, getting rid of limitations, new functionality, solving problems with crashes, or simply installing a more recent version of the system. However reinstalling Android on a tablet it can end in disaster if you choose the wrong firmware version or install it incorrectly. In this case, you can completely kill the tablet, that is, make it unbootable (although not completely - this can be treated, but in the service and for money).

Another danger of installing unofficial firmware lies in modified drivers that will cause the equipment to operate in abnormal mode. Yes, for some time you will enjoy the increased speed of the tablet or the cool sound of music, but this often causes premature wear and tear of the hardware, which means you will have to spend money on repairs or buying a new device.

On top of that, by installing firmware modified by someone unknown, you can install integrated malware along with it. For example, various Trojans, spying on the user and stealing personal data. In a word, when thinking about how to reflash Android on a tablet, think about what this might mean for you.

How to reflash an Android tablet yourself

And yet, if you decide, you should first study the instructions on how to install Android on your tablet, and also stock up on the firmware version suitable for your device model. In addition, you will need a microSD card, formatted in FAT32 just in case, and one or two programs that will need to be downloaded from Google Play. So let's get started.

Step-by-step instruction:

First of all, you need to obtain root (superuser) privileges. This is done in order to install ROM application Manager, with which we will flash the tablet. Obtaining root privileges can be done different programs, such as GingerBreak, Z4Root, Universal Androot and others, most often in one click by selecting the “Root device” option.
After rooting you will need to immediately download and install ROM Manager- this is a program for firmware Android tablet, which we will use. There is a paid and free version of ROM Manager. The paid (Premium) version allows you to download and install new firmware versions directly from the program itself without unnecessary steps. Therefore, in this case you won’t have to think long about how to update Android on your tablet. If you have installed free version- You will need to search for firmware yourself.
After ROM installation Manager, go to its main menu and install ClockworkMod - it contains a new system bootloader. Also, just in case, save a backup copy of the system - the “Save current ROM” option.
Before reinstalling Android on your tablet, transfer the new firmware to microSD card and install it on your tablet. Next, fully charge the tablet, disconnect all connected devices except charger, launch ROM Manager and from the main menu select the “Install ROM from SD Card” option. This will start the firmware update process. On average it takes 15 - 30 minutes. The first boot of a device with an updated system may take the same amount of time, but you should not try to speed it up.
If immediately after booting you see an Android icon with an exclamation mark on the screen, you will need to perform a system restore. By clicking on Exclamation point you will be taken to the recovery environment. From the menu that you will see, you will need to select the “Install ZIP from SD Card” command. Next, disable verification of the firmware crypto signature using the “Toggle signature verification” command. After that, select the “Choose ZIP from SD Card” option and specify the path to the firmware file on the SD card. The problem will be fixed and the tablet will be able to boot successfully with the new system.
If you are not satisfied with the new firmware, you can always return the old one. How to restore Android on a tablet from a saved copy? Very simple! To do this, install ROM Manager again and select the “Backups” option from its main menu. In the list of backup copies is the one you saved. previous version firmware, all that remains is to select it and restore it in one click. All!

And a little warning. When collecting information on how to flash p, do not forget to first inquire about possible failures and problems during the update process, since anything can happen. And remember that regardless of whether the process of changing the firmware was completed successfully or not, you will lose the warranty on the tablet. Therefore, everything you do is done entirely at your own peril and risk.

A large number of users in the world from time to time encounter a situation where their tablet stops turning on. This problem sometimes it cannot be eliminated in any way, so the user is forced to resort to flashing the firmware. Many users do not know how to flash a tablet, so this issue should be considered in more detail.

Reflashing the touch device

The need for flashing occurs not only when the tablet stops turning on. Sometimes it happens that the user wants to update the OS. Sometimes it happens that Android starts to work with freezes. In this case, the user is faced with a choice: buy new tablet, or experiment with the firmware. It should be noted that flashing is a complex, unpredictable process that requires certain knowledge and skills!

You perform all actions at your own peril and risk; If you are not sure of your actions, do not reflash the tablet yourself!

Different models of Android tablets have different files and firmware methods. There are known cases when, when trying to reinstall the OS using “foreign” firmware, the tablet became unusable. Be careful!

Problems requiring OS reinstallation

You need to reinstall Android if you experience one of the following problems:

The device freezes while loading;
Android on the touch gadget has an old version, and you want to install a newer one;
You previously tried to update your OS and the update failed;
The OS is malfunctioning;
Android keeps rebooting.

If you experience one of these problems, you will need to reinstall your system.

Firmware via OTA

If your tablet supports OTA Updates, then you can update the OS in a simplified way that requires less time. Please note: Before you start flashing your tablet, there are some precautions you should take.

Attention: make a backup copy of the data from your device, and also charge the battery of your gadget!

To update the OS via OTA, go to Settings, select “About device” => “System updates”, after activating the Wi-Fi module on your Android tablet. Click "Check Now" => "Accept File". The system will display instructions for further actions required to complete the Android update process.

Update via OTA

Updating Samsung tablets

If you own a Samsung device, you can update the OS using " Samsung Kies" Sync your tablet and PC; you will be prompted to update the firmware. Click on the tablet firmware button. The process will be completed automatically.

Nexus tablet firmware

How to flash a Nexus tablet? Download drivers http://vk.cc/3KpSI1; ADB program http://vk.cc/3KpSMa; and firmware corresponding to your device model: http://vk.cc/1R9IZN.

Turn off your Android tablet. Press for 3 sec. “Volume-” and Power. Synchronize your device and PC. Go to Device Manager => Other devices, then: Android. Select Update Driver. Specify the path to " adb android _...". Create a folder “adb” on drive C. Copy the files from the archive to this folder. While in adb, click right click mouse with Shift pressed. Next - Open the command window. Enter - fastboot oem unlock. On an Android tablet, click Yes. Enter - fastboot reboot-bootloader.

This was preparation for flashing the Android tablet, and now the flashing itself begins. Copy the files in the archive to the adb folder. Open flash-all.bat. The screen of the Android tablet will display the message “Press any key...”. Press any key. Reflashing the tablet is completed. You can turn off USB. Your device will reboot and turn on.

Please note: the first download of the Android tablet will be extremely long; do not interrupt the download process!

The first time an Android device can boot up to 15 minutes! Many users interrupt the download, thinking that the firmware process failed and the tablet froze. However, it is not. After flashing the tablet, the first boot always takes a long time!

To update other tablet models, visit http://vk.cc/3cB0u2. Here are the files required for flashing tablets. various models. In addition, you can also update your device using this list of firmware: http://vk.cc/DWIOn.

Firmware for other models

To update the system on other tablets, use the instructions that correspond to your model.

Model	Update process	Required links
Q88 Allwinner A13	To reinstall Android on this device, download files; extract from archive img file. Next you need to install Phoenix USB Pro and specify the path to recovery.img. Click "start". By pressing “Volume+”, synchronize your Android device and PC. Press Power 6 times. The process starts automatically. After the tablet firmware is completed, you will see the message “Finish”.	http://vk.cc/3qhagEhttp://vk.cc/3qhakr
Fujitsu STYLISTIC M532	Copy the contents of downloaded archives to an Android tablet; then install ClockWorkMod. Go to Recovery, press “Volume-”; Power. Execute " Wipe data..."; then – “Install zip...”; "Chooze zip..." Mark the firmware, reboot. Follow the same steps with "Gapps". Reboot, execute the “Wipe data” command. After these operations are completed, Android on the device will be updated from version 4.0 to 4.4.	http://vk.cc/3cB0Xchttp://vk.cc/2Gy4VQ
Onda V989	First you need to synchronize your devices. Then you need to install PhoenixSuit on your PC. Click firmware, specify the file V989 CWM.img to the program, confirm the start of the process Android updates, wait for completion.	http://vk.cc/3pgdg2http://vk.cc/3pguWH
ViewSonic ViewPad 7	In order to update the OS in ViewPad 7, you need to recovery mode make Dalvik Cache and Wipe DATA, then reflash ROM and GAPPS.	http://vk.cc/3m7gRKhttp://vk.cc/3m7idW
Huawei MediaPad T1 8.0	In order to reinstall the OS in the MediaPad T1, you need to unpack the archive downloaded from link No. 2 into the memory of the touch gadget. Install ClockWorkMod, press Power/Volume-. Wipe data on your Android tablet; then Install zip and Chooze zip. Carry out the same actions with the first archive. After the reboot, Android will already be updated.	http://vk.cc/2Gy4VQhttp://vk.cc/3cB0Xc

Huawei MediaPad T1 update

Chinese tablet firmware

Has your device stopped working normally or won't boot at all? Change the firmware. Our article will tell you how to do this.

Navigation

Many users are faced with the need to urgently replace the firmware on a gadget - a phone or tablet with the Android system. Changing the Android firmware is exactly the same procedure as changing the operating system of a computer.

Before you start doing anything on your device, you need to first understand why you need it at all. If your gadget turns on, but does not boot, or the system has become severely malfunctioning, especially after you installed a new application, then you can first try to reset it to factory settings

What is a hard reset?

Hard Reset, or in other words, hard reset- This is one of the methods of restoring factory settings, when all personal information(applications, recordings, contacts, music, videos and so on)
As a rule, with using hard Reset can solve problems that arise with your Android device and give it a second life

How to reset to factory settings?

If your device is turned off, you need to press several buttons at once. Each device has its own key combination, so check which one it is. For example, the Ergo Crystal Lite 7 tablet supports a volume down key and a power button. After this, the “rocker” should continue to be clamped until final loading. After this, you should be shown the Android menu of the Recovery system
But it also happens that this method may not work and then the device will not start. In this case, you should think about replacing the gadget's firmware

There are several situations when it is really worth changing the firmware

when restoring basic settings does not work
The tablet loads only up to the splash screen and nothing more
The tablet stops working reliably

How to correctly change the firmware on a tablet or other device?

Before you start changing the firmware on your tablet, first find the appropriate version specifically for your model. There are situations when the desired model The firmware is quite difficult to find. In this case, a similar one is usually used technical specifications your device model
For example, firmware from Ainol Crystal II works well on the Ergo Crystal Lite 7 tablet
Let's talk about ways to change or update the system on Android devices

How to install firmware from a memory card?

Installing firmware from a memory card is simple and takes the least time. But it’s not always possible to find one that can be installed in exactly this way
To do this, you need to write the firmware to the root system of the card using a computer and a card reader.
After that, go to the Android recovery menu
Select apply update from/sdcard, and then select the desired archive with firmware
Next, the installation will automatically start.
If the installation was successful, you will see the corresponding phrase. It looks something like this: “copy cust files successe!”
Otherwise, the inscription will be different: “Installation aborted”
Reboot your device and enjoy new firmware, or find out the reason why your installation failed

How to flash a Samsung smartphone?

For tablets and smartphones of this company, it is better to use a program called Kies

Download and install it on your computer
Connect your tablet or smartphone using USB cable. If this is a primary connection, the device may require installing drivers to operate.
Run the program
Select the item called Back up/Restore
Check the boxes opposite necessary files to copy them to your computer and select Back UP
After that, click Complete. When the backup is created, go to the main menu and find your device in the list of connected devices
Click on your device and see if there are new updates for it. If they are, then click Fimware upgrate
Once the installation is complete, you will see the corresponding message. All you have to do is agree with the program and you can disconnect the device from the computer

What to do if the method doesn't work?

If the firmware for your device is provided in a three-file TAR archive, then use the Odin program. In order for the program to work smoothly with your gadget, you need to obtain superuser rights (Root)

Next, download the archive with the firmware in the form of three different files
On your gadget, go to the settings menu and enable USB debugging
If you have a tablet, then simultaneously hold down the volume down button and the power button
Connect your device to your computer
Run installed program and in the PDA field select your firmware. If you have several of them, then distribute them according to the required fields
Check the box next to automatic reboot and reset firmware counter and click Start
After rebooting, the device can be disconnected from the computer

How to update a gadget from LG?

LG brand devices can be flashed using KDZ programs Updater

Download the firmware and program
Install drivers if necessary
Install and enable the firmware program
If you have a smartphone: connect it to your computer, in the Type column click 3GCQT, in the PhoneMode column - DIAG, and then indicate where your firmware is located. Next, run the installation
If you have a tablet: open the folder with the firmware, run Windows file Enabler.exe, from the shttps folder run http.exe and UpTestEX_mod2_marwin.exe. Next, restart the tablet, but when turning it on, hold down Volume Up

How to flash a Chinese device?

Many devices with the Android system, including those made in China, can be flashed using the SP Flash Tool program.

Download the SP Flash Tool and SP MDT programs, as well as USB drivers VCOM
Turn off your device
Remove and put back your battery if possible
Use a USB cable to connect the device to the computer and install the necessary drivers
After this, you can disconnect the gadget from the computer
Open the file with the installer program. Click on Scatter-loading and select the firmware to install
Click on the download button
Completely disconnect your tablet or smartphone and connect it to your computer. If you need to connect a tablet, then while inserting the cable, hold your finger on the volume up button. If everything is done correctly, then the firmware will begin to install

Until the operation is completed, you should not touch it with your hands, constantly check how long you have to wait, and even more so, disconnect the cable from the computer, as this can damage the device to such an extent that it will break down.