How to use winsetupfromusb 1 6. Below are options for various operating systems


The WinSetupFrom USB program is universal program to turn a regular flash card into a bootable device.
Difficulties for beginners may arise at the stage of managing this program, when, faced with a completely English interface, the user will simply close it and go in search of a Russified, but weaker in functionality program.
This article provides a user-friendly manual for the program.
Program installation
Before you start working with the utility, you need to download WinSetupFrom USB. The problem is that it is so popular that many resources offer to download it from them, adding in a bunch of Trojans and suspicious programs.
This article provides instructions for WinSetupFrom USB according to its latest version, that is, 1.0.

Solution to boot disk 100% in Windows 10

The good thing is that no installer is required, just unzip the program and select the bit system that suits your computer. 32-bit and 64-bit available.
At all, this program is universal when working with flash drives, since in addition to creating bootable and multi boot device, there are three more possible actions. But here the emphasis will be on the first.

1. A window will open in front of you in which you can select the desired flash drive. In this case, the flash card will need to be formatted using AutoFormat it with FBinst, if you are recording images for the first time (don't forget to check this option), which will lead to the destruction of all data on it.
This necessary measure to create a multiboot device from a USB drive.
If the flash card has already been used in the WinSetupFromUSB program to create a boot device, then this step can be skipped.
2. Now you need to add the required installation software to the flash drive. If you download several distributions, the flash drive will turn into a multiboot device, which will significantly increase its functionality. This also needs to be specified in the options and the address to the required folders and files must be written in the line.
The line opens by pressing the button with «…» on the right side.
Below are options for various operating systems:
  • Grub4dos is needed when installing a program from a Linux ISO (or other compatible ISO) or programs to restore the system, for example, antiviruses such as Kaspersky or RBCD. Then Grub4dos will be needed here.
  • Bart PE (Win Builder or WindowsFLPC or UBCD4Win) - needed if the folder address includes I386. Their purpose is disks based on Win PE. This option is not for beginners.

  • Setup2003 is used for Windows XP or Windows 2000 to add folders from these operating systems. Also provide the folder name if the address includes I386 (or I386/AMD). Here you need to create a virtual disk image and specify the path to virtual drive. Or open the ISO image with an archive unpacker, extract the files into a separate directory and indicate its name in the WinSetupFrom USB window (indicate the name of the disk containing the distribution when creating an installation disk from a flash drive).

  • Server 2008(2012) for Windows Vista 7th and 8th versions. You also need to enter your address virtual image with the operating system.
  • SysLinux BootSector, applicable if syslinux was used, is a file loader on a Linux system. Here you need to enter the path to the SYSLINUX folder.

How to download Windows 10 from the official website for free

Having entered all the necessary paths to required files, you can press the Go button, we go further through the algorithm and in a few minutes you will have a ready-made bootable USB drive.
  • A small correction for those who have Windows 7 or 8 - WinSetupFrom USB may slow down copying windows.wim. It's okay, it's a minute lag.
In addition, the WinSetupFrom USB program supports recording a virtual image with a weight more than 4 gigabytes to a flash drive, but in FAT32 UEFI format.

I’ll post the preparation method here. USB flash drive and subsequent installation of Windows XP from it.

Let's get started. First, we need to download the program itself.

We will need:

  • USB flash drive (minimum 1 GB);
  • original Windows XP CD;

It is advisable that the Windows XP disk is not genetically modified. It is also recommended to use Windows XP with SP3 installed.

1. Preparatory actions.

Download and extract WinSetupFromUSB somewhere. Let's create a folder into which we will copy the contents of our Windows XP CD - let's say. As a result, this folder should look something like this:

2. Run WinSetupFromUSB.

Connect the USB flash drive to the computer and run WinSetupFromUSB:

In the “Add to” field USB disk:" check the box for "Windows 2000/XP/2003 Setup" in advance and point to our folder with the copied Windows XP distribution -

3. Format the USB flash drive.

Now we need to format our USB drive. In WinSetupFromUSB, click the “RMPrepUSB” button, we get to the formatting program window:

Place the checkboxes as in the above screenshot, press the “6 Prepare Drive” button - ATTENTION! ALL THE INFORMATION THAT WAS ON THE DEVICE WILL, OF COURSE, BE LOST!

Once the formatting is complete, all we now have to do is click the “GO” button.

4. Boot from the USB flash drive and install Windows XP!

The Windows XP installation process in our case is slightly different from the standard one. When you first boot from a USB flash drive, we get to the menu GRUB4DOS:

We are interested in the second point. Select it and get to the following submenu:

1.Back to Main Menu

2. First part of Windows XP setup from partition 0

Select item No. 2 - “First part of Windows XP setup...”. The installation process then continues as usual until a reboot. After the reboot, you should boot from the USB flash again. We get to the menu again: GRUB4DOS:

1. EXPERIMENTAL - Start PLoP boot manager

2. Windows XP/2000/2003 Setup

Again select item No. 2, again we get into the submenu :

1.Back to Main Menu

2. First part of Windows XP<ваша версия Windows>setup from partition 0

3. Second part of 2000/XP/2003 Setup / Boot first internal hard disk

but here we already select point No. 3 - Second part…

After which, finally, Windows XP will be finally installed.

M multiboot flash drive, equipped with a distribution kit of several operating systems, antivirus Live-disc, the necessary programs, working autonomously from bootable media is universal tool for solutions various problems and computer problems that you have to deal with every now and then ordinary users. What can we say about IT-specialists, most of whose professional life is restoring the functionality of computer equipment.


Flash drive, where various self-loading software solutions, will replace a bunch of different optical boot drives. A single multiboot flash drive can be used to neutralize viruses that block the computer from starting, and to reinstall the operating system, and to restore it from backup copy, and for allocating space on the hard drive, and for solving other problems. Available for download on the Internet ready-made images Live-disks with a selection of various software for solving computer problems. But, naturally, it is better to prepare a universal rescue tool yourself by selecting the contents bootable flash drive to suit your individual needs and preferences.

The program can create flash drives with various bootable software WinSetupFromUSB for Windows. It can complete a selection of bootable media based on the bootloader Grub4dos . This is what we will use to create a multiboot flash drive. And, accordingly, we will consider this entire process in detail below.

1. Contents of a multiboot flash drive

The first step is to prepare a distribution kit for a multiboot flash drive. In our case, we have a flash drive with a small volume by modern standards - just 8 GB. Therefore, it will be equipped only with the necessary tools. And this is the distribution Windows versions 8.1 , 10 and old XP , antivirus Live-disk from Avira, distribution manager disk space and free backup. Prepare for recording to a flash drive ISO-images of bootable media of the selected software and installation disks of operating systems.

2. Download WinSetupFromUSB

WinSetupFromUSB- free program. On the official website you need to download it latest version. At the time of writing this article, the current version is 1.6 . WinSetupFromUSB works portablely, without installation into the system. All you need to do is unpack the downloaded archive and launch the program shortcut in accordance with the bitness of the current Windows.

Download the WinSetupFromUSB program from the official website:
http://www.winsetupfromusb.com/downloads/

3. Formatting a flash drive

Next stage - formatting a flash drive. This process can be done as regular means Windows (team "Format" in the context menu called up on the flash drive in Explorer) , and inside WinSetupFromUSB. Let's consider the last option.

In the program window at the top, select the desired flash drive if there are several of them connected to the computer. Activate the option checkbox "Auto format it with FBinst". After which it will open additional options. Of these, you only need to decide on the future file system of the flash drive - NTFS or FAT32. If the distribution kit prepared for writing to a flash drive contains files whose weight exceeds 4 GB, you must select file system NTFS. If not, leave it FAT32 default.

The FAT32 file system must also be left if the multiboot flash drive is also intended to work with computers based on BIOS UEFI. In this case, you will not need to disable the function Secure Boot , and the distribution contained on the flash drive 64 -bit Windows 8.1 And 10 will be installed on GPT-disk partition.

WinSetupFromUSB prepares a universal bootable USB flash drive - and for computers with a regular BIOS, and for devices based on BIOS UEFI. But the interface UEFI sees only bootable flash drives formatted in FAT32. Some programs can bypass such restrictions and create bootable UEFI-flash drives with file system NTFS, but WinSetupFromUSB, alas, is not one of them.

So, decide on the file system and click the button below "Go".

In the warning window about erasing data on the flash drive, click "Yes".

And we press again "Yes" in another warning window.

In a few seconds we will see the inscription "Job done"- Job is done. Click "OK".

Now you can start adding the contents of the multiboot flash drive. The order in which you add images of installation disks of operating systems and bootable media for programs is not important. It is only important to adhere to the corresponding column in the central part of the window WinSetupFromUSB.

4. Adding a Windows distribution

Adding a Windows distribution kit is possible in two forms of the program window. One of the forms is intended for adding installation images Windows drives, starting from version Vista , the other is for installation files Windows XP and older versions of the system. In our case, we first add an image to the corresponding form Windows 8.1. We put a tick on this form and use the browse button to indicate the path to ISO-image. The set of a multiboot flash drive is formed in stages: each distribution is added and written in a separate order. Press the button "Go".

We wait for the process to complete and click "OK".

Now we activate the same form with a checkmark and use the browse button to add another Windows distribution. In our case, this is the installation disk Windows 10. For the same Windows versions you can add its various editions one by one - 32 - And 64 -bit. Add, click "Go", wait for the process to complete.

5. Nuances with Windows XP

Presence on a flash drive installation disk Windows XP It may be necessary in rare cases to reinstall the operating system on very old PC builds. But the process of creating a bootable USB flash drive with this version of the system using WinSetupFromUSB there are some nuances. In the program interface, the top form is intended for adding a distribution kit of Windows XP and earlier versions of the system.

This form's review button does not add the usual ISO-distribution image. Before contents ISO-the image must be opened in virtual disk drive. In systems Windows 8.1 And 10 this is done using standard means - on ISO-file is called context menu and a team is selected.

IN Windows 7 and more earlier versions mounting systems ISO-images are possible through third party programs type Alcohol 120% or Daemon Tools . Contents of the connected ISO-the image is transferred to a separately created folder.

And this folder is already added to the program window during the process of creating a bootable flash drive WinSetupFromUSB.

The next step is to accept the license agreement.

And only then start recording.

Another nuance is the need to integrate drivers for SATA-controller in the distribution kit Windows XP, if it does not initially contain them.

6. Adding bootable media for programs

ISO- operating system distribution images Linux , Live - disks on the base Linux And WinPE, bootable media various programs using the browse button are added to the active form "Linux ISO/Other Grub4dos compatible ISO". After adding ISO-a small window will appear in the image "Boot menu name", in which you can specify a name like bootable media will be displayed in the bootloader menu Grub4dos. In our case, we indicate the path to the antivirus image Live-Avira disk. Press the button "Go" and wait for the recording to complete.

And then the image.

7. Testing the flash drive

One of the advantages of the program WinSetupFromUSB is built-in BY for emulation hardware computer - QEMU. By using QEMU You can immediately, without leaving your current operating system, test a flash drive - either a regular bootable one or a multiboot one. At the bottom of the WinSetupFromUSB window, check the options box and click "Go".

A QEMU window will open, in which everything the same will happen as on the monitor screen after booting from the flash drive. The first thing we will see is the bootloader menu Grub4dos. Using the navigation keys or numbers according to serial numbers The software is in the list, we can choose one or another bootable media, Live-disk or operating system installation process.

The Windows installation disks will be combined into two partitions. One will contain distributions Windows XP and older versions of the system, in the other – versions of Windows starting from Vista. Each section leads to a window additional menu download the corresponding versions and Windows editions.

Installing operating systems using removable media stopped being a long time ago big problem. If you don’t have a blank CD/DVD at hand, or the drive itself is faulty or simply doesn’t exist (for example, in netbooks and ultrabooks), then a 1-2 GB flash drive for this moment Every second person has it. So, after reading this guide, you can create a bootable USB flash drive with Windows XP (and not only) and thereby greatly simplify the transition from one OS to another.

What do you need?

  • Download in advance worker Windows iso image XP. It is advisable to choose a distribution that does not have any third-party modifications, which means that the likelihood of its instability is minimal. If the standard XP does not suit you, we recommend choosing the assembly from Zver.
  • Removable disk (flash drive), at least 1 GB. Subsequently, it will be completely cleared, so copy all important data from it.
  • Program WinSetupFromUSB v.1.3. It can be downloaded absolutely free of charge on the official website of the developer.

Creating a bootable USB flash drive

There are several ways to prepare a removable drive for installing Windows XP from it. But despite this, we will use the simplest program WinSetupFromUSB and in about half an hour we will get a ready-made bootable USB flash drive. You just need to follow these steps:


BIOS setup

Windows XP in terms of installation is slightly different from its sisters - Vista, 7 and 8. Therefore, you need to pay a little more attention to setting up the BIOS:

  1. The first step is to set the download priority to removable drive. Therefore, while starting the computer/laptop, press F2 or Del to get to the BIOS window.
  2. In the Boot section or in the Boot Device Priority list, put your bootable USB flash drive first (depending on the manufacturer motherboard BIOS version have significant differences, so these instructions are very general).
  3. Most modern computers work with the S-ATA data interface, while Windows XP only has built-in drivers for the outdated IDE. Therefore, in the BIOS, set Storage Configuration to Compatible.
  4. Save the changes and restart your computer by pressing F10.

Installing Windows XP

  1. After successfully booting from the removable drive, Windows XP will greet you. Following the installation program instructions, press Enter (<Ввод>)
  2. Violation license agreement Microsoft products are punishable by law. So, confirm by pressing the F8 button that you are confident in your actions and continue installing the system.
  3. This window contains the entire list hard drives, on which it is possible to install Windows XP (by default, only HDDs with IDE data transfer technology are displayed). Select the drive you need and proceed to the next step.
  4. Formatting hard drive is mandatory, so make sure that all your files are safe and only then select the third option “Format partition in NTFS system”.
  5. After preparing the HDD and copying the necessary system files, Windows XP Setup will proceed to the final processes. First, set the System Language and Input Methods.
  6. Please enter your username. The organization field can be left blank.
  7. Enter serial code, which looks like XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
  8. Select a computer name and set an administrator password (the latter is optional)
  9. Next, set the date and time, as well as the time zone.
  10. Leave network settings at default
  11. If the computer/laptop is at home, then leave it in the WORKGROUP group. If the organization where you work has a domain network, then check with your system administrator for information.
  12. Congratulations! Windows XP has been successfully installed and is ready for full operation.

Bootable flash drives with operating systems ready for installation are a very convenient and useful thing for any user. Having several of these “little rescuers” in stock, you can quickly and easily help yourself or your friends/colleagues restore a faulty Windows OS or install a new one for them.
Enjoy your use!

WinSetupFromUSB is a free program for creating bootable flash drives with Windows OS and other operating systems running on a computer with USB flash drives. A bootable flash drive is needed to install or reinstall the operating system on a computer, to perform system recovery work, treat a computer for viruses, copy files from a computer, or to perform other operations.

If your computer cannot boot normally, to perform troubleshooting or to reinstall the system, you need external bootable media that you can boot from.

On modern computers CD/DVD drives are often not installed. Therefore, booting on such a PC is only possible with external USB drive. You must burn an operating system image or other boot image to a USB drive in order to this disk became a bootable USB flash drive.

After creating the boot USB storage, from it you can start the installation of any version of the operating system, or, for example, run a utility to perform the task of restoring a system from a backup, or to treat your computer from a virus infection.

IN free program WinSetupFromUSB supports various distributions of operating systems, emergency rescue disks from antivirus manufacturers, images with a system preinstallation environment, various boot disks and utilities.

Key features of the WinSetupFromUSB program:

  • Windows operating system support (Windows XP, Windows 2000, Windows 2003, Windows Vista, Windows 7, Windows 8, Windows1, Windows 10, Windows Server 2008, Windows Server 2012) of various bits: 32-bit and 64-bit systems.
  • Support large quantity operating system distributions Linux systems (Linux Mint, Ubuntu/Xubuntu/Kubuntu, Debian, Fedora, CentOS, Mageia, OpenSUSE, Gentoo, etc.)
  • Support for BSD operating systems (FreeBSD, OpenBSD, etc.)
  • Possibility of creating rescue disk recovery from ISO image a, created on Linux based, from various manufacturers antiviruses ( ESET SysRescue, Avast Rescue Disc, Kaspersky Rescue Disk 10, etc.)
  • Support for Windows PE ISO images (Windows Preinstallation Environment)
  • Support WinBuilder, WinFLPC,BartPE, UBCD4Win, etc.
  • Support for ISO images compatible with Grub4dos CD emulation, such as Ultimate Boot CD, most DOS utilities, boot disks, Paragon, etc.
  • Starting with WinSetupFromUSB 1.1, it is possible to create a bootable USB drive that can boot into BIOS mode and in UEFI mode.
  • Syslinux boot menu using one of the sources: Syslinux or Isolinux as bootloader
  • Creation support

How to create a bootable USB flash drive with using WinSetupFromUSB? The process of creating a bootable flash drive takes place in several successive stages:

  1. Choice USB flash drive.
  2. Formatting a flash drive in FAT32 format or NTFS format.
  3. Selecting an ISO image of the operating system or another Bootable ISO image.
  4. Burning an ISO image to a USB flash drive.

The WinSetupFromUSB program runs on English language in the Windows operating system. The application does not require installation on your computer. You can download WinSetupFromUSB from the official website of the developer.

winsetupfromusb download

After downloading, unzip the archive with the program, place the folder in a convenient place for you (on the Desktop, on a computer disk, on a USB flash drive). Run the program from the folder, selecting the file corresponding to the bitness of Windows installed on this computer: for a 32-bit operating system, or for a 64-bit operating system (read more about how to find out Windows bit depth, read).

Bootable USB flash drive in WinSetupFromUSB

We will create a bootable USB flash drive with an operating system in the WinSetupFromUSB program Windows system 10. When creating boot disk, please note the following:

The WinSetupFromUSB program does not yet support unified Windows images 10, consisting simultaneously of 32 bit and 64 bit operating systems (x86/x64 - “two in one”) in one ISO image, which can be downloaded from the website using . You can separately with 64-bit (or 32-bit) include several editions of Windows in one ISO image, which can be used in the WinSetupFromUSB program.

Boot Windows flash drives 7 or Windows 8.1 (Windows 8) are created in WinSetupFromUSB in a similar way.

Follow these steps:

  1. Open the WinSetupFromUSB program.
  2. The program automatically detects the flash drive, which will appear in the “USB disk selection and format tools” field. Definition USB disk can be restarted using the “Refresh” button.
  3. Check the “Auto format it with FBinst” checkbox and select the “FAT32” file system.
  4. Next, you need to select an ISO image with the Windows operating system. In the “Windows Vista / 7 / 8 / 10 / Server 2008/2012 based ISO” field, add the path to the OS image.
  5. Click on the "GO" button.
  1. In the following windows, agree that all files on the flash drive will be deleted and agree to the formatting settings. Click on the “Yes” button in both windows.
  2. The process of writing the system image to the USB flash drive is underway, which will take some time.

  1. After you finish writing files to the flash drive, a notification window will open in which you need to click on the “OK” button. To exit the WinSetupFromUSB program, click on the “EXIT” button.

Congratulations, you have bootable windows, which runs from a USB drive.

Launching a bootable USB flash drive to install Windows 10

For start boot drive, you need to enter the Boot Menu or enter BIOS settings(UEFI) to select the boot priority from a USB flash drive.

In the “Grub4DOS” window, boot from the “Windows NT6 (Vista/7 and above) Setup” item is selected, press the “Enter” key on the keyboard.

In the window " Windows Boot Manager", using the "" and "↓" arrows on your keyboard, select "Windows 10 Setup x64" (in this case).

In the following steps, without installing the system on your computer, you can run System Restore using Windows.

Conclusions of the article

The free program WinSetupFromUSB is designed to create bootable USB flash drives. Using a bootable USB flash drive, you can install, reinstall Windows, run necessary actions to troubleshoot the operating system, run an operating system restore.

The WinSetupFromUSB program supports the creation of bootable flash drives with various distributions of the Linux operating system, BSD, creation of Windows PE, boot disks for system recovery or treatment for viral infection computer.


2024 gtavrl.ru.