How to disable safe mode on your Alcatel phone. Android Safe Mode: How to Enable or Disable

Twitter

On a smartphone or tablet, many problems in the form of freezes and glitches can be solved by turning on safe mode work. And when everything is eliminated, you need to get out of it again. It turns out, alas, not always. Moreover, in some cases, return the phone to normal mode becomes a problem. Sometimes users reboot their devices dozens of times, but this does not give any result.

If this has become an impossible task for you, then be sure to read this article.

Android mobile OS has a safe mode. It allows you to boot the device so that only system applications are active. Due to this, you can solve problems that, for example, arose during its use.

Let’s explain more clearly: your smartphone from htc, xiaomi, zte, huawei, lenovo, fly or any other manufacturer freezes and glitches a lot, its sensor does not respond correctly, graphic artifacts appear, etc. In this case, switching to safe mode will allow you to start the device like this that any personalization made on the phone, or custom settings, disappeared from it. Accordingly, without glitches and freezes, you can get rid of “strange” applications and delete unnecessary files, which load the system and cause unstable work devices.

However, after the operations performed, you need to return the gadget to normal mode. But not everyone can do this. It also happens that a smartphone or tablet constantly restarts with the “safe mode” active. As a result, turning it off becomes a whole problem.

Option #1

The easiest way to disable Safe Mode on Android is to restart your device. However, this method is not always effective. Therefore, if your smartphone or tablet continues to boot from safe mode, then try the following:

Turn off your device.
Carefully open the back cover and remove the battery from it for about a minute. It is recommended to remove the SIM card as well.
Reinstall the battery. Return the SIM too.
Turn on the device.

Did it help? If not, then try the next option. In addition, please note that the described method is not suitable for some devices from Lenovo, Alcatel, Asus, Fly, Sony, Micromax and many others. etc. due to the fact that they are equipped with non-removable batteries.

For reference! Why does removing the battery help? It's simple. Safe Mode sometimes does not disable due to the fact that information about it is stored in short term memory, which stores data about the current time, date, time zone, etc. By removing the battery for literally half a minute, you will reset all data, including the need to startsafe mode.

Option No. 2

There is another simple way. Often it helps to disable Safe Mode on samsung devices, dexp, lg and bq. Sometimes it works on gadgets of other popular brands. All that is required is:

Reboot the device.
When booting the system, press and hold Home key until the startup process is complete.

However, do not forget that some smartphones do not have a built-in device reboot function. If you are the owner of such a device, then simply turn it off and then turn it on while holding the Home button.

For reference! Some versions of the OS send a message to the user when entering safe mode. So check your notification shade. Sometimes it reflects a special reminder. Tap on it and the system itself will offer to disable itsafe mode. In this case, the device will automatically reboot and start in normal mode.

Option #3

Some Sony Xperia and Samsung have a specific way to disable safe mode. To return the device to normal mode, you need:

Turn off the gadget.
Turn it on after a few seconds.
Wait until the splash screen with the brand's inscription appears during boot, and press the volume up button, holding it down until full inclusion device

After these manipulations, your samsung galaxy a3, a5, etc. will load as usual.

Option No. 4

If the above methods do not help, then delete latest app(or several recently installed programs) that was installed on your phone or tablet. You know how this is done, but let us remind you just in case. You can use the application menu in Settings for this. Or simply hold down the program icon and drag it to the trash.

After these manipulations, immediately reboot the device.

Option #5

You can remove safe mode by returning to factory settings on your tablet or phone. Is it true, this method It is better to use it in extreme cases, when no amount of “dancing with tambourines” helps. After all, there is a risk of losing all the information on the device.

Therefore, before resetting to factory settings, do not forget to save backup copy all your files and contacts from phone book. As for the procedure itself, then:

Go to the settings of your phone or tablet.
Find the item “Backup and reset” and tap on it.
Let's launch backup.
Then select the “factory reset” option. We confirm this action.
We are waiting for the return to the initial settings to complete.

Now your device will be like new. At the same time, safe mode will also be disabled.

Android OS has found millions of fans around the world. Its success is not surprising, because all rights belong to the global giant Google. Users choose it for its convenience, clear interface and democracy. After all, almost all elements can be changed, even editing system files. However, such modifications do not end well if the device is in the wrong hands. In addition, if you thoughtlessly download various content, for example applications from unknown sources, this can harm even the highest quality version of the shell. And the “robot” itself, like no other OS, is susceptible to virus attacks and the occurrence of errors during operation. For solutions similar problems The developers have equipped the platform with the ability to enter safe mode. We will talk about what it is, how to use it and how to remove safe mode on a tablet and smartphone in this article.

Why do you need BR and how to enter it?

In order to get into it, you need to press the lock button as you would to turn off the gadget. The “Turn off” item must be pressed and held until a request to switch to BR appears. Select "OK" and wait until your device reboots and turns on in BR. A separate topic for discussion is safe mode on the tablet; we will tell you how to disable it below. In the meantime, I would like to say a few words about general capabilities.

BR is a mode designed for device diagnostics. If you know what Windows Safe Mode is and you have encountered it, then you should not have any problems using it on your tablet. In this state, all third-party applications, drivers, utilities and components are disabled in order to easily test the system and identify any errors. In this situation, you can notice how “briskly” “naked” Android can work, as long as it is not burdened by third-party programs, various widgets and other similar components. It is important to note that the Internet connection is also disabled in BR.

How to turn off safe mode?

Safe Mode doesn't require any special disabling. As a rule, it is enough to simply reboot the device, and it will start in in the usual form. But sometimes it happens that even after a reboot, the gadget still returns to safe mode; quite often tablet owners complain about this. What to do in this case?

Safe mode on a tablet: how to disable it?

If after you rebooted the system, the device did not return to its previous state, try simply turning it off, waiting for a while and turning it on again. In some cases, it is also necessary to remove the battery. But how to remove safe mode on your tablet? After all, not all such devices can be removed back cover. Of course, it is possible to return the gadget to a state where all components are functioning, and there are even several ways.

How to return the tablet to normal mode

To do this, you need to reboot the system. When you turn on the tablet again, you must press the "Home" button. You should not release it until the gadget is completely turned on.

The variety of tablet models produced running the Android OS is truly great. Some of them don't even have a built-in reboot function. Then you need to completely turn off the gadget. And immediately after launch, press the button we already know.

Reboot the tablet using recovery mode

Recovery mode is a special console that can be used to reset settings or boot the operating system. If you bought your tablet from a certified store and with stock firmware, this console must be present on your device. She looks a little like BIOS operation, if we draw an analogy with a computer. If for some reason this console is not available, you can download it directly from the OS itself using small utilities. So, safe mode on the tablet: how to disable it in the recovery console?

Each device model (it doesn’t matter whether it’s a tablet or a smartphone) has its own way to get into recovery mode. Initially, you need to turn off the gadget. Then try holding down the power and volume down buttons at the same time (you can also try volume up). This is the most common way to log into the console. If not, you should read the instructions on how to enter “recovery” from your tablet.

In the console you will see the item R eboot system - this is a reboot. You can get to it using the volume keys, and select it with the power button. Using the item Wipe is reset to factory settings. This should be done only as a last resort, if all the previous methods did not help you return the tablet to normal operation. All user settings will be deleted, but the information on the memory card will remain.

We told you about safe mode on your tablet. You now know how to disable it, and therefore do not be afraid to use this method to diagnose the system and troubleshoot problems.

Any advanced user of the Windows operating system knows about the existence and purpose of safe mode. However, few people realize that such a mode is also available in the Android mobile operating system.

Android safe mode is a special mode in which you can boot your phone. When loading an Android device in safe mode, only system applications will launch. Thus, you can easily boot a device that freezes or is very slow due to installed applications.

After booting into safe mode, you can remove everything that interferes with the operation of your Android device and return to normal operation. But, in some such cases, users have difficulty returning to normal operation of the device. In this article we will talk about how to enable and disable safe mode on Android.

How to remove or disable safe mode on Android

Let's start with how to disable safe mode on Android, since this is what causes the most difficulties. There are several ways to remove safe mode on Android.

Method #1: Disconnect the battery for 30 seconds, then install it back and try to boot Android device in normal mode.
Method No. 2. Restart the device and while turning it on, hold down the Home button and hold it until the device boots up completely.
Method No. 3. Restart the device and while turning it on, hold down the volume down button and hold it until the device boots up completely.
Method number 4. Restart the device and while turning it on, hold down the volume up button and hold it until the device boots up completely.

How to enable Safe Mode on Android

If you have Android 4.1 or higher a new version, then in order for Android you need to press the power button of the device. After this, a window will appear in front of you in which you can turn off the power of the device or turn off the sound. Here you need to click on the “Power off” item and hold your finger until a message appears asking you to switch to safe mode.

When prompted to switch to safe mode, click on the “OK” button.

After this, the Android device will reboot in safe mode. After loading, a message will appear at the bottom of the screen informing you that the device is operating in safe mode.

Not like that in a complicated way this is what is being done, but you already know how to disable safe mode on Android.

If you are using Android 4.0 or higher old version this operating system, then in order to enable safe mode you just need to turn off the device, and when you turn it on, wait for the manufacturer’s logo to appear and hold down the volume up and down buttons. These buttons must be pressed simultaneously and held until the Android device loads.

Would you like to add something to the article? Share in the comments.

Data-lazy-type="image" data-src="http://androidkak.ru/wp-content/uploads/2016/09/bezopasnyj-rezhim-vyhod..png 400w, http://androidkak.ru/ wp-content/uploads/2016/09/bezopasnyj-rezhim-vyhod-300x178.png 300w" sizes="(max-width: 280px) 100vw, 280px">
The Android operating system provides extensive opportunities for independent editing of system files and installation third party applications. But sometimes this turns against the user himself: new program or the changes made cause problems and failures. Especially for such cases, Android provides a safe mode function ( Safe Mode), the purpose of which is the same as in Windows system: Booting the device into Safe Mode only launches the installed programs(those that were installed by the manufacturer).

Thus, the user gets rid of a number of problems that arose as a result of downloading third party programs or damage to the operating system itself:

emergence of malware
freezing
strong braking
fast battery drain, etc.

At the same time, safe mode makes it possible to evaluate the speed of “pure” Android, without additional graphics and applications.

Devices running on Android platform, go into special mode due to damage to the operating system or application failure. This is a download that starts the phone with only system applications. You can restore a frozen phone and clear your memory of unnecessary information. There are several ways to disable safe mode on Android.

Switching to the standard mode of the device becomes a difficult task at first glance. After the manipulations performed, not every phone is restored to its typical position.

Features of the condition

For experienced users computer system We know that there is a safe mode in Windows. However mobile device exposed various conditions and goes into the same mode on Android.

Protective mode- this is an integral part Android systems, which helps in case of overload. Initially, the reason for the system boot switch is determined. This occurs due to a crash or serious application error. The user is faced with the task of how to exit safe mode on Android and restore the phone, saving all settings and information.

Some versions of the operating system send a notification to the user when the user enters a different state. Apps that are malfunctioning are a common reason why a device goes into security mode. To remove it, you need to delete recently downloaded applications.

There are several ways to turn off safe mode on Android. This means that if you follow the instructions and perform basic actions, there will be no problems with loss of information and files. In the gadget settings, a list of programs opens and in the downloaded tab they are deleted unnecessary applications. It is recommended to deactivate all installed programs. Then the device reboots. Otherwise, other options are used.

System recovery methods

You can make sure that your smartphone or tablet is in a safe state by looking at the screen. An inscription about protective mode appears there. If there is no such notification in the corner of the desktop, the mode is disabled. In case of failure, the device must be rebooted.

In order to remove the protection mode, you need to turn off your phone or tablet and remove the battery for at least half a minute.

Then reinsert the battery and turn on the device again. After the manipulation, the Android system and phone work in normal mode, and all applications, contact details and other information are saved.

The downside is that it is difficult to remove the battery, so this option is not suitable for all devices. There are many other ways to exit Safe Mode. The Home button (on and off) is pressed while the phone or tablet is rebooting. However, for some reason, not all devices support this reboot feature.

You can turn off safe mode on your phone by pressing the volume up or down button. This option resets the settings to the original settings, so all saved information will be lost. All applications can be returned after the manipulations have been carried out.

Model specific procedure

There are several ways to disable Safe Mode on Lenovo. For example, remove the battery for a few minutes and install it again. The device must be restarted and at this time press the “Home” key, holding it down until it boots completely. After turning on the smartphone, press the volume down key. It is important to hold your fingers in this position until the device is fully loaded. Reboot Lenovo again and when turning it on, hold down the volume up button and hold until fully activated.

Disable Safe Mode on ZTE phone, Fly (Fly), Dexp and other models can be done in several ways. When unknown program interferes normal operation device, you should not immediately give the phone to service center, if you can try to restore the work on your own.

Main stages:

You need to go to settings, select application manager and a specific object to delete. After removal, the phone reboots into normal mode. If despite all attempts to use various methods, the security mode appears again, then it is better to start again and reset the settings. Before returning the device to its original appearance, a backup copy of the data is created. The user goes to settings, selects backup and reset. After a reboot, the standard mode is restored.

Way Hard Reset similar to a factory reset, but this is done using the developer method. Hard reset deletes everything from the smartphone, including cache and memory, which are not deleted by a factory reset.

Hard reset ( hard reset) clears the phone starting from entry level. Security mode moves the smartphone or tablet to a safe zone, and this property is used by developers and programmers to debug the application.

Other actions

A safe method is the system's response to errors or atypical encoding. To remove the device from emergency mode, not all methods help. It is important to prevent the resumption of this action.

Extreme measures

To save files and applications, files are backed up. Subsequent recovery will allow you to transfer data and contacts to the restored phone.

Saving information:

Copying files to your computer.
Save to the cloud on Google Drive.
Export contacts to a file and save on your computer.

Another way is to turn off the power and press certain keys. The button combination depends on the device model. However, there is a standard algorithm that is used when conventional debugging methods fail.

Key options for restoring your phone:

Power and volume down button This option is suitable for LG (LG), HTC, Alcatel and Motorola models.
Power and volume up key + Home (for Samsung).

After the recovery menu appears, use the volume keys (up, down) to select “Delete data and reset the device.” “Wipe data/factory reset” is pressed and activated by the power button. The decision is confirmed by clicking on consent. After a few minutes, the recovery is completed and the phone is activated.

They also use the notification panel. In some situations, you can turn off the mode by unlocking your phone and swiping down from the top of the screen.

Removing malware

Malicious code is the main culprit of system malfunction. Security mode is activated when the volume button is locked, and on Samsung the volume down button is locked. For example, when these keys are mechanically blocked by a case or other object, the protective mode is activated randomly. This reason is not a sign of a serious malfunction. You need to take the device out of the case, visually inspect the keys, press the volume a couple of times and make sure that they are pushed in without resistance, and reboot the phone.

When it turns on after installing the program safe way, act quickly. Suspicious objects are selected at random and launched simultaneously with operating system, for example, home screen widgets.

Then they launch the settings, the icon of which is located in the application bar. Another option is to launch the notification panel. Scroll down, select the application and open the page where the basic information is located. Some devices only support this feature after selecting "Application Info". Then press the delete key. If the application is system, then click the “Disable” tab. The final stage of the procedure is a reboot. The phone should turn on in its original mode.

If serious problems arise with software Natural loading of the gadget is disabled. Standard custom applications and programs are blocked by the system for protection purposes or run in a limited version. Removing a safe state is not difficult if you know the basic methods.