How to set up a smart watch. How to set up a smart watch phone for children? Watches with GPS tracker for children: instructions in Russian

Good day. Today we will tell you how to connect correctly smart watch KW88 To android device. There doesn’t seem to be anything complicated about connecting, but some users have questions about connecting, so we’ll also look into it possible mistakes in the operation of the mobile application from this watch. As a rule, after ordering a watch, you start it up and start admiring it, but the moment comes when you need to connect it to the phone and then the questions begin. When this watch arrived, there was nothing except the box and a screwdriver, and I had no idea how to connect it, so I began to conduct experiments. First of all, I went into the settings on the watch, turned on bluetooth on both devices and started searching. When I found the devices and decided to pair them, the watch connected, but information about notifications and calls was not received from the smartphone. After that, I began to study the watch settings, during the course I noticed that there was a special section called " Mobile Assistant", with this assistant you can download special application. I downloaded the application to my smartphone and started connecting the watch to the smartphone via mobile app, but nothing worked, since the application crashed or simply stopped when trying to connect the device. So there was a mistake that most people encounter. To connect them, you need to remove the application that you downloaded from your device, then go to bluetooth in your watch and phone and delete the paired devices. We then proceed according to the instructions, which I will describe below.

First of all, you need to go to Google Play and download the application. In the search for the market, I simply wrote " KW88"and the application itself is called " Sinwear"Download and wait for installation. After that, make sure that Bluetooth is turned on on both devices."

How to enable Bluetooth on KW88 smart watch?

We turn on the watch, swipe across the screen, and a menu appears in front of us. Scroll down in the menu and look for " Settings"

In the settings, we need to find the section " To plug", find and go to it. Next you need to go to the bluetooth tab and move the lever to the on position.

We do everything as shown in the pictures above and your application will stop crashing and will connect without any problems. Then you can customize the application for yourself.

That's all, thank you for your attention. If you have any questions about connecting, ask them in the comments below!

The clock was first installed on the VAZ 2103. At that time, the presence of this device on the car panel was considered a luxury for examples of the Soviet automobile industry. Today it is unlikely that such a device will surprise anyone, but it cannot be said that the VAZ 2107 watch is a useless element of the interior. Moreover, tuning enthusiasts also fell in love with them, installing other devices in their place, for example, a voltmeter, or replacing the standard clock with a more interesting option - an electronic clock with a set of additional functions.

Connecting a VAZ 2107 watch

When assembling the “beard” of a VAZ 2107, beginners often encounter the problem of connecting electrical appliances. Moreover, all of them, be it a cigarette lighter or a watch, have no secrets. There are three wires connected to an electromechanical clock: “minus”, clock power and backlight power. The minus is connected to a terminal located directly on the case; further connection of the VAZ 2107 watch can be done literally “at random”. The remaining two wires can be connected in any order. If the clock does not go, but the backlight lights up, you should simply swap the wires.

Dismantling and installation of VAZ 2107 watches

You have to take off your watch to check it, repair it, tune it, or replace it with a more advanced version of the device. Before removing the watch, you must disconnect the ground terminal from the battery. The removal procedure is slightly different on models before and after 1993. In the first case, the sequence is:

• remove the three plates covering the instrument cluster mounting screws;
• Unscrew the screws and lift the dashboard;
• release the clock fastening brackets and remove them from the panel;
• disconnect the terminals of the wires connected to the clock.

To remove the watch on a “Seven” older than 1993, you must perform the following operations:

• unscrew the screws securing the center console and remove it;
• unscrew a couple of screws located at the bottom of the ashtray;
• remove the radio;
• Unscrew a couple of screws securing the radio frame;
• remove the decorative plate from the frame of the upper ventilation nozzles that covers the screw;
• unscrew the screw;
• Unscrew the 4 screws of the lining installed under the control panel for the interior ventilation and heating system;
• dismantle the switches installed under the central heating and ventilation nozzles of the cabin;
• unscrew the screw holding the instrument panel;
• pull out the instrument panel, disconnect the wire terminals from the clock;
• remove the panel along with the ventilation nozzles;
• unscrew a couple of screws securing the clock;
• remove the watch.

Installation of the clock is carried out in the reverse order of dismantling.

Malfunctions

The standard VAZ 2107 watch is not the most “vitally important” device, however, when it is standing, it causes certain inconvenience and can disorient you in time. Therefore, their malfunction, like any other device or car system, must be eliminated. To restore their functionality, it is necessary to determine why the clock on the VAZ 2107 does not work. In principle, there are few reasons for the malfunction:

The fuse can even be checked visually. To do this, just remove it from seat and inspect the thread. If the fuse is blown, you should replace it with another one of the same rating. However, fuses often burn for a reason, but when a short circuit occurs in the circuit. It can occur if the terminal of the positive wire has fallen off and touched a metal part of the body, or if the insulation of the power wire is damaged and “shorted” to ground. Therefore, before replacing the fuse, and especially if it is working and the clock does not work, you need to check the condition of the wire and power terminals. Therefore, the watch will have to be removed.

You can check for a short or break in the power wires by ringing them on the housing or on the terminals of the corresponding fuses.

Oxidized terminals must be cleaned, but if they are loose and do not fit well on the contacts, lightly press them with pliers. If there is damage to the wire insulation, it can be repaired by wrapping it with electrical tape.

Replacing the standard clock of a VAZ 2107 with digital ones

The standard clock is not informative enough, and it looks too standard. Therefore, many owners of the “Seven” change them to more advanced models. Usually this is an electronic watch with a voltmeter function. Such a device not only looks more modern and attractive, but also allows you to control the voltage of the on-board network. Installing an electronic clock on a VAZ 2107 is easy. On the market you can find a wide range of electronic watches for the “seven” with different display colors and functionality.

A good option is a watch with an alarm clock, calendar, voltmeter and thermometer function. The most advanced model has two temperature sensors - internal and external, which allows you to control two temperature parameters at once.

Such clocks fit perfectly into the place of the standard ones, and connecting them does not require the installation of additional power circuits. The only thing you should take care of is to install an external temperature sensor and run a wire from it to the location where the clock is installed.

If in electronic watch There is no function for measuring external temperature; their installation is completely similar to the installation of a standard clock and does not require additional actions.

Detailed instructions for self-configuration children's watch Q50, as well as full information on their use.

Q50 setup instructions

The Q50 watch set is a watch that Charger, screwdriver and instructions.

☀ Purchase a Micro-SIM from a telecom operator in advance: Beeline or Megafon for stable, proper operation.
The SIM card tariff must be with mobile Internet.
Tele2 operator SIM card is not suitable due to technical features.
MTS operator SIM card often causes a “Waiting” error due to support for 4G networks.
Pre-install the SIM card in the phone, check the availability of the Internet, the absence paid subscriptions and PIN code.
Install the SIM card into the watch by first twisting the back metal cover and carefully lifting the battery, being careful with the wires.

☀ Install the application on your smartphone for operating Android systems or iOS.
Application name "SeTracker".

The application is easy to find by scanning the QR code.

☀ Launch the application and register the unique ID indicated on the metal cover of the watch under the barcode.
Next, register your username and password. One login can be used for different smartphones, for example, if both mom and dad are watching the child.
You can fill in additional fields in your profile, but they do not play a big role.
In the telephone field, enter a number to restore your credentials in case you forget or lose them.

Q50 Operating Instructions

First of all, you need to look at the clock and figure out what symbols exist on the main screen.
The central part of the screen is used for the clock and date, information is obtained automatically from mobile operator, there is no need to set it manually.
With the appropriate characteristics of the correctly selected tariff and the availability mobile internet, no difficulties in operation were observed.

• GSM icon indicating the presence of mobile cellular communications.
• Quality Level Icon mobile communications GSM.
• EDGE icon - add-on GPRS system, more modern and reliable.
• GPS icon - satellite system navigation, which helps to determine the location of the child. The dot inside indicates that communication with the satellite has been established.
• Battery indicator. Clearly shows the charge level of the device.
• System of rewards and incentives. Using the application, electronic hearts are sent from your smartphone to your watch, signaling your child that you care. Near the heart are numbers that count the awards.
• The icon indicates the number of voice messages received on the child’s watch. A voice message can be sent via a smartphone application, lasting no more than 15 seconds. You can listen to the message on the watch using the "SOS" button.
• Indicator for removing the watch from your hand. The icon appears on the watch, and a message about the withdrawal is instantly sent to the application for mom and dad on their smartphone.
• Baby step counter.

SeTracker application

☀ The SeTracker application, by installing and registering in it, allows you to remotely control a watch of any model without much difficulty. Lightweight and clear interface with the main functionality We'll look at this in more detail below.

☀ Voice messages: send a voice message from the parents’ smartphone to the child’s watch, while saving it in the application.
The message duration cannot exceed 15 seconds.
After the watch receives a message, the microphone icon and the number of received messages will light up.
The child will be able to listen to the message on the watch using the "SOS" button.
You can send a response voice message by recording by pressing and holding the "Power" button.

☀ Map, where is the baby?: real-time location of the clock on the map.
By default, information is updated automatically every 3 minutes. Clicking the "Find" button will clarify the child's location at a given second.
Also on the map you can see what technology was used to transmit the information: red indicator - reports GPS navigation, blue indicator - base station, green illuminated - WiFi mode.

☀ Health: will tell caring parents about the number of steps taken by the child, calories burned, distance traveled and even time spent watching colorful dreams. By default, sleep time is set from 22:00 to 7:00. Each option has own settings, such as weights in kilograms and step distance in centimeters.

☀ Reports: history of the child’s movements, with the ability to edit the time period and view it on the map.

☀ Settings:
☀ SOS number: set 3 SOS numbers, and the watch, when you press the “SOS” button for a long time for more than 3 seconds, will start calling first to one number and, if the phone is not picked up, then to the remaining two numbers. Button "1" on the watch corresponds to SOS number "1", button "2" on the watch corresponds to SOS number "2", phone number "3" in the application is an additional emergency number.
☀ Back call: One-way communication with the clock. Here the number is entered and sent to the watch, within 10 seconds the watch calls back to specified number, without giving the appearance of work. This is a quiet call, this is where parents can hear what is happening around the child. Also, this function can help in finding lost watches without revealing yourself to passersby.
☀ Geolocation operating mode: the time period after which the child’s location will be requested. Normal mode requests location every 600 seconds, economical - 3600 seconds, constant - 10 seconds. The more often the request occurs, the greater the energy consumption.
☀ Contextual model: appears according to the watch model, allowing you to change the loud call sound to vibration or complete silence.
☀ Do not disturb: Set the time during which the watch will not receive incoming calls.
☀ Setting up messages: the SMS number is required to receive system messages about the low charge of the watch less than 20%, pressing the "SOS" button and a message about removing the watch from your hand. All messages will be collected in the "Messages" section.
☀ Mark friends: list of friends, list of watches with which your child’s watch has become friends.
☀ Allowed numbers: specify 10 numbers that the watch can call. These could be neighbors, familiar children or teachers, for example.
☀ Phone book: indicate 10 numbers of the child’s relatives and friends, sign a name for each number, it will be displayed on the watch when a call arrives.
☀ Language and time: set the language and time zone.
☀ APN setting: editing function apn settings on the clock. - IN this moment does not function properly, please wait for an update.
☀ Hand removal sensor: if this function is enabled, the watch will signal if the watch is not on the child’s hand for more than 3 minutes. The sensor on the inside of the watch directly touches the hand, so as soon as the sensor stops feeling the child’s hand, it notifies mom and dad.
☀ LBS: thanks to this service you can get operational information about the location of the clock, based on the signal strength to the nearest base stations operator.
☀ Remote shutdown: after specifying the main number, the child will not be able to turn off the watch himself. Turning off the watch is only possible using this function, remotely from the application.
☀ Restoring the operating mode: resetting the clock settings, setting them to working condition default.

☀ Geofence: territorial restriction of a child’s movements in the area. In the settings, set the radius of the zone, upon crossing which you will receive a message that the child has left the safe area.

☀ Rewards: electronic hearts that are immediately sent to the watch when sent. This function is a nice addition and cannot but please your child and you in particular. The child will always know when his mother misses him or blows him a kiss.

☀ Message: system messages. Here you will see important events, occurring with the watch on the child’s hand: low charge watch, leaving the geofence, removing the watch from your hand and others.

☀ Alarm clock: 3 alarms can be set.

☀ Where to find the watch: the function helps to find the watch if, for example, a child took it off upon arriving home and forgot where he put it. The command "Where can I find it?" will result in a minute clock signal, which can be turned off with any button.

IMPORTANT:
Monitor your watch's positive balance through Personal Area Your telecom operator or another way.
When the mobile Internet expires, the connection with the watch is instantly lost.

Setting clock settings via SMS

By using short messages SMS to the phone number set in the watch, you can send settings commands, as well as check their functionality.
Via SMS messages you can check the location of the child, set SOS numbers, language settings, turn on the microphone - the so-called silent one-way call to the watch and others useful features are described below.

Be careful and careful when entering these codes.

Command Action	SMS command
☀ Erase all watch settings, reset to factory settings.	pw,123456,factory#
☀ Receipt technical settings hours. The most important command when setting up a children's smartwatch.	pw,123456,ts#
☀ Reboot the clock.	pw,123456,reset#
☀ Set mobile internet settings on your watch. This command is necessary when changing a SIM card, for example if you change your telecom operator.	For Beeline - pw,123456,apn,internet.beeline.ru,beeline,beeline# For Megafon - pw,123456,apn,internet,gdata,gdata# For MTS - pw,123456,apn,internet.mts.ru,mts,mts#
☀ Clock server. This option is selected in the drop-down menu of the SeTracker application, but if for some reason this setting knocked down, it must be installed manually. It depends on the correct server where the clock will be positioned, i.e. geolocation is based on this setting.	pw,123456,ip,52.28.132.157,8001# - Europe and Africa pw,123456,ip,54.169.10.136,8001# - Asia and Oceania pw,123456,ip,54.153.6.9,8001# - North America pw,123456,ip,54.207.93.14,8001# - South America pw,123456,ip,agpse.3g-elec.com,8001# - Hong Kong
☀ The central phone number can be set with this command. Phone format via 8.	pw,123456,center,number# Remove center number: pw,123456,center,d#
☀ Ask additional number phone. Not required. Phone format via 8.	pw,123456,slave,number# Delete additional number: pw,123456,slave,d#
☀ Set the numbers SOS 1, SOS 2, SOS 3. Phone format via 8.	pw,123456,sos1,number# pw,123456,sos2,number# pw,123456,sos3,number# Remove SOS numbers: pw,123456,sos1# pw,123456,sos2# pw,123456,sos3#
☀ Set the phone numbers to dial using buttons 1 and 2. Phone format via 8.	pw,123456,tel1,number# pw,123456,tel2,number# Remove numbers from buttons 1 and 2: pw,123456,tel1# pw,123456,tel2#
☀ Setting the interval of data transfer to the server in seconds. The more often information about the location of the watch is requested, the faster the battery drains, but the more relevant the data is. In the command, 300 means the request time in seconds.	pw,123456,upload,300#
☀ Call back. This function allows you to listen to what is happening around the child. By sending a phone number, you receive a call from the watch within 10 seconds, the smart watch does not show any signs and the child does not know that he is being eavesdropped.	pw,123456,monitor,number#
☀ Request to receive coordinates of the child’s location. In the response SMS you receive two coordinates, which, when clicked, can be viewed on a Google map.	pw,123456,url#
☀ Set the language and time zone on the watch. Where 9 is Russian, 3 is time zone +3. Information can also be set through the SeTracker application > Settings > Language and time.	pw,123456,lz,9,3#
☀ Changing the date format.	pw,123456,dateformat,0#
☀ Set the time on your children's smart watch. Filling rule pw,123456,time,hour.minute.second,date,year.month.day#.	pw,123456,time,Hour.Minute.Second,date,Years.Month.Day#

Today, smartwatches are no less popular than smartphones and laptops. Once you use them, you will fully experience the many benefits that such a product offers. Below we will talk in detail about how to set up a “smart watch” using GPS Smart as an example. Baby Watch various models(Q50 and 60, G 22 and 36, W5 and others).

How to set up a smart watch - preparing to set up GPS Smart Baby Watch

Before performing any manipulations with the watch, charge it via USB. When the battery is full, turn off the device and carefully remove the cover along with the battery to insert the SIM card (there must be money in its account, a mobile Internet service must be connected, and there must be no PIN code). Now let's install the program to set the clock:

• find the SeTracker application in App Store or Google Play;
• download, install and launch it;
• when the interface window opens, fill in the proposed fields;
• Account – administrator account to which clock management will be linked (similar to the function parental controls on PC or smartphone);
• Nickname – display name, optional;
• P_number – phone number;
• Password – application password, default 123456;
• R_password – re-entry password for security.

How to set up a smart watch - possibilities

• Intercom: direct communication watch and smartphone. The function can send a voice message to the phone, but not longer than 15 seconds.
• Map: location of the watch owner on the map. Two types of marking are possible - a red icon with determination of coordinates via GPS, a blue icon with LBS, that is, via cell tower.
• Set SOS phone number: Allows you to add up to 3 emergency phone numbers.
• No disturbing: mode to reject any signals and notifications.
• SMS allerts setting: the ability to receive notifications about the need to charge the device or do other important tasks.
• Contacts: list of contacts you can call – 10 in total.
• Turn off: useful opportunity, which consists in blocking the shutdown button. If the function is active, you can only deactivate the watch remotely, from a smartphone with an administrator account.
• Safety area: Set the radius of the “safety zone”. If an object leaves its perimeter, an alarm is activated.
• Rewards: a gamified system of rewards and punishments for a child, which consists of decreasing or increasing the number of “hearts” on the screen.
• Alarm: setting an alarm, from 1 to 3 alarms.
• Watch: function to search for lost watches by sound.

Actually launching certain functions does not require additional explanations - just select the desired menu item, go into it and follow the instructions on the screen. You can configure the watch from your smartphone remotely using SMS commands, for example pw,123456,reset# to reboot or pw,123456,monitor,+7(number)...# to enable wiretapping.

Don't forget to specify a European server for sending GPS coordinates, sending the command pw,123456,ip,52.28.132.157,8001# In response, you should receive a service message with the text “OK” if the service is connected successfully.

Every parent worries about their child and tries to protect him from problems. To always be aware of your child's whereabouts, use a watch with GPS. In the article we will tell you more about them.

Navigation

Of course, children won't always be little, and there comes a time when they grow up and want to go out on their own. Therefore, parents begin to look for devices so that they can always see where the child is. There are various watches with built-in GPS beacons, but they also have a phone!

Watch Smart Baby Watch GPS Q50

Appearance of Smart Baby Watch GPS Q50

Smart Baby Watch GPS Q50 - side view

Smart Baby Watch GPS Q50 front view

So, let's talk in order about what a watch with a GPS tracker looks like and how to set it up.

Functions

• Use as a telephone. A SIM card is inserted into the device itself and you can make a call to it. The child himself can also make a call by pressing key 1 or 2. The quality of the connection is good, you will not hear any unnecessary sounds. Unlike simple phone, the watch is constantly on your hand, so it is more convenient to wear it, since it will not fall out of your pocket during games.
• Location tracking using a GPS beacon. To track where your child is now, install the SeTracker application on your smartphone, computer or tablet.

SeTracker for Smart Baby Watch GPS Q50

SeTracker application map

• Installation of a kind of “fence” ( Geofence). In the application, you select a section of the territory, upon leaving which an alert will be sent.

Geofence in SeTracker

• Route history. You can track where your child walked during the day. This is especially true for those parents whose children have already started school.
• Voice mail. It is too interesting feature, since you can send your child a reminder or say something important.
• Reward system. When a child behaves well, you can send him a heart, and if it’s the other way around, then take it away.

Hearts in SeTracker

• The parameters specify three contacts per button SOS. In an emergency, the child will be able to press it and call. If no one picks up from the first number, the rest will be dialed in order.
• To prevent calls from other people's numbers, a special list, accommodating 10 contacts.
• Function "Voice" allows you to hear everything that happens to the child. It works like this: enter your number in the appropriate window, the application will send a command to the watch and it will call you. You will answer the call and be able to hear everything. The watch itself will not show anything and the child will not know about it.
• It is possible to set reminders about low battery remaining, about removing the watch, as well as a signal SOS.
• There is also an option "Do not disturb", that is, you can set a time at which you will not be able to make calls.
• You can disable the power button so that the gadget turns off only at your request through the application.

SeTracker settings

• There is another option "Health". She calculates indicators such as distance traveled, lost calories and sleep time.

"Health" in the SeTracker application

How to prepare your watch for work?

General view of the Smart Baby Watch GPS Q50

Preparing the Smart Baby Watch GPS Q50 for operation

• First, make sure they have enough charge. If the battery level is low, charge the watch.
• Turn off the device using the power button.
• Using a screwdriver, which is also included in the kit, remove the cover and carefully lift the battery, just be careful as it is connected to the device.
• Insert the SIM card into the slot. Before doing this, ask her to enter a PIN code and top up her account to pay for the Internet.
• Secure the SIM card with a special latch.
• Replace the battery and replace the cover.
• Now you can turn on the clock.

Installing the smartphone application

Or use the QR code:

Registration in SeTracker

• Device ID— device number. Indicated on the cover of the device.
• Account- administrator account name
• Nickname- Name
• P_number- phone number
• Password— password for authorization
• R_password- repeat password

How to work with the main menu?

• Intercom. Connecting your phone with your watch. The application can send voice messages to a smartphone. Activate recording, and the application will be able to save a message lasting no more than 15 seconds. The application begins recording a message that lasts no more than 15 seconds. Pressing the SOS key starts listening to the recording. To send a message, long press the ON button. The application will write that it was sent successfully.
• Map. Your current location. The application displays a map with your current location. When the icon is red, the position is determined from using GPS, and if blue, then through a cell tower (LBS).
• Settings. This is where the basic setup of the device is carried out.
• Set SOS phone number. Here you can enter three phone numbers so that an alarm signal can be sent to them if necessary. When you press the button, one number will be dialed first, and if there is no answer, the other two will be dialed until someone answers.
• Voice. As a rule, the number of one of the parents is set as a follower. There is also the possibility of control via telephone.
• No disturbing. You can set up call barring and incoming calls barring at certain times.
• SMS allerts setting. This is a setting for notifications about the end of charging, a signal SOS and so on. .
• Contacts. Here you can add 10 contacts who can be called from the watch.
• Restore the default work model. Return to normal mode work.
• Turn off. Disable the power key so that it does not turn on the watch. In such a situation, shutdown will be carried out only using the application on the smartphone.
• Safety area. This is a safety zone. Its minimum radius is 500 meters. The alarm will be activated when the child goes beyond its limits.
• Rewards. Click on the heart icon and the display will show hearts and quantity. The child can be rewarded or punished by increasing or decreasing hearts.
• Alarm. This is an alarm clock. You can put as many as three of them for different times.
• Watch. If you have lost your device, then direct the command to them. They will call within a minute to give you time to search. To stop the search, you can press any key.

Other features

Other functions of Smart Baby Watch GPS Q50

Sending an SOS signal

Press the SOS key and hold for three seconds so that the watch sends an alert to the smartphone and changes the mode. You can enter three numbers to receive an alert. It will be repeated only three times. Notifications are sent to the application and to parents' numbers.

Alert when watch is removed

On the clock there is special sensor, which is located around the hand. The alarm will sound after a few minutes when the device is removed. They send notifications to parents and to the app.

Signal about the end of charging

The amount of charge is shown as a percentage. When it becomes less than 20%, a signal is sent to the application and parents.

Health

The function counts the distance traveled, hours of sleep, calories, and so on. This is very useful because you can find out if your baby is sleeping well and how much weight he has lost while walking or running.

Internal telephone

Hold the key "ON" for recording voice message. After recording, the corresponding icon will appear. Press the key SOS to play a message from the watch.

Voice messages

Set phone numbers parents. When the team is registered, enter the number. You will send a message by voice.

Speed ​​dial buttons

The watch has two keys speed dial. Both make calls to SOS numbers 1 and 2.

The address book

Ten numbers are allowed. You can make calls to them from your smartphone.

How to set the clock via SMS commands?

Setting up Smart Baby Watch GPS Q50 via SMS

To manage watch settings via SMS, use a password 123456 or 523681 . From your phone, send the following commands to your watch:

• pw,123456,ts#— checking IMEI number
• pw,123456,center,your phone number#— installation of a control contact for the clock
• pw,123456,ip,52.28.132.157,8001#— selecting a server to work with location
• pw,123456,apn,APN address,APN login,APN password#— change the APN of the mobile operator. To do this, use your login and password to set up the Internet.

Video: Smart Baby Watch GPS Q50 - detailed review and setup