How to set up an mts 4g modem on a computer. Possible problems and pitfalls
The Internet covers the lion's share of every person's life. For modern people active image life forces us to look for an alternative to wired cables. Since it is not always possible to find a free Wi-Fi network, the choice is obvious - buying a 3G modem.
MTS modems have many advantages, such as mobility and relatively low price. You can use the Internet from almost anywhere in the country, by at least where there is coverage from of this operator. Often, an MTS modem can be purchased at a promotion, and if it doesn’t suit you, you can return it or exchange it.
Inside each modem there is a SIM card, which is usually included with the modem. IN selected models There is a microSD slot available. Before connecting the MTS modem, you should select tariff plan and top up your account.
Installing an MTS modem
Many users do not know how to install an MTS modem, although everything is quite simple. First of all, you will need a PC or laptop to which you will need to connect a modem. The connection occurs in two different ways: connecting directly via a USB port or connecting via a special cable. The USB connection is more stable, but at the same time there is no way to select the location best communication.
Now the question on the agenda is how to set up an MTS modem? Everything is quite primitive, given the fact that the modem itself will offer to install everything necessary drivers. Some models require you to insert the included software disc.
It should be noted that you should not interrupt the driver installation process. If you have Windows 7, then for older generation MTS modem drivers you will need to install Vista compatibility package 2 (in the properties of the Install.exe file). Next, go to the desktop and click on the “MTS Connect” shortcut. The program should launch, in the window of which you should click on the connection. If you wish, you can not use this program at all, but configure the connection in manual mode. To do this, create a new Dial-Up connection and specify it as the auto-dial number *99# .
Despite all the advantages of MTS, devices with its logo are programmed to recognize only native SIM cards. But users can also “deceive” the system by unlocking (flashing) the modem.
Probably, in the twenty-first century no one can live without the Internet. Therefore, if you need high speed connection anywhere in the city, then modems from are the ideal solution. It is worth adding that they can connect not only to personal computer or laptop, but also to tablets and routers.
Not everyone knows how to configure and connect a modem, so we have written a training article especially for people like you, which describes the entire operating process in detail.
We connect the MTS modem to the computer
The very first step is to connect the modem to the computer. This is quite simple to do, just plug it into a free USB port and install the drivers. Initially, the equipment will detect the device as a CD, but after a few seconds the computer will automatically start installing components and the main management program - MTS Connect Manager. Here the user does not need to do anything, because the technology will do everything for him in automatic mode, and you just have to wait. Upon completion of the installation process, the modem will no longer be reflected as a CD-ROM, but as a full-fledged flash drive. A MTS Connect Manager shortcut will also appear on the desktop.
Immediately after this, click on it, the program will start, click on the “connect” button and that’s it. Great, now you have a high-speed connection that you can use anywhere in the city. Launch your browser and feel free to use the World Wide Web.
Perhaps that's all that needs to be done. Some users may have connection problems, in which case try plugging the modem into another USB port, restart your computer and clean the system of various debris.
If you want to work with a modem from MTS, but at the same time use the services of another operator, then reflash the device.
How to connect an MTS modem to a router?
Many people know that all routers are different, and their price directly depends on their capabilities. So, to some models you can connect a USB modem, which will “inflate” the Internet throughout the room. But the price of such a device will be slightly higher, because not every router will be able to support 3G or 4G connections. So, how to connect a modem to a router?
- Make sure your devices are compatible.
- Install the modem in the router.
- Install necessary settings in the web interface.
If you specify as a dial-up number *99# and the address of the access point internet.ms.ru, then a 3G or 4G connection will be automatically created in the settings. Or you can simply set the router to automatically configure the connection immediately after turning it on. Some models provide pre-set settings for all Russian operators.
If you encounter problems connecting the modem to the router, try updating the software or purchasing more new model router.
The process of connecting a modem from MTS to a tablet
IN in this case everything is somewhat more complicated, however, almost every user manages to cope with the task. Otherwise, just seek help from a professional. So how do you connect a modem to your tablet?
On at this stage there are two possible options developments: if the tablet has a USB connector or if not. In the first case there will be no problems. Plug the device into the port, create a high-speed connection, specify the dial-up number *99# and access point internet.mts.ru and enable data transfer. Ready.
In the second case, you need to dig around. Install the program " Hyper Terminal» on the computer to get through it to the tablet. Immediately after starting the program, select required device, enter the command ate1, and then AT^U2DIAG=0. Click OK.
Attention! Combination AT^U2DIAG=0 created for modems from HUAWEI. If yours is from another company, then find the appropriate command specifically for it.
Many Chinese companies require the connection of a USB modem, so our main task is to change the perception of a flash drive as a CD-ROM to USB. Next you need to configure the connection.
The process of disconnecting the modem from MTS
If the user decides to stop using the MTS modem, then he needs to turn it off. This is done very, very simply. We interrupt the connection in the MTS Connect modem management program (if on a PC) or stop data transfer (if on a tablet). We remove the modem from the USB port.
MTS is a progressive operator that keeps up with the times. That is why the company’s subscribers no longer need to endure low-speed Internet with network access problems. Today connect to a good global network no problem. Connecting an MTS modem to a router is only one side of the coin. In order to use all the features from MTS, you just need to know how to connect an MTS modem to a tablet, and how to use the modem on a computer.
Connecting to a computer
Connecting the modem to various gadgets- this is a fairly simple process, but mistakes can only be avoided if you have a good understanding of how to properly connect the Internet.
Connecting a modem from MTS to a computer or laptop does not require much effort. Eat step-by-step instruction, which will help you sort everything out. First you need to connect the modem to a free port. After automatic installation corresponding drivers in your computer, you will be able to see the appearance of a new optical media CD-ROM. Then the MTS Connect Manager program starts automatically.
The entire installation process is extremely simple. The user will only have to left-click “Next”. Your computer will do all subsequent work for you. And as a result of the installation, each user will be able to see a shortcut to the above program on the Desktop of their computer. After that, all you have to do is launch it and click on the connect button.
In most cases, the modem works properly, but sometimes various hiccups and problems may occur. If the second case applies to you, try connecting the modem again using a different USB port.
When working with the MTS modem multiple times, use the same port to avoid repeated installation work.
Connecting to a router
The modern rhythm of life is designed in such a way that you need to follow the latest news technology. This will help you always stay online. Experts advise using more powerful models modems. Setting up a 4G USB modem with the function WiFi router will help you get the most out of your opportunities.
In order to properly connect the modem to the router, you need to perform several sequential steps:
- Check equipment for compatibility;
- Install the modem to the router port;
- Log into the router interface and check the appropriate settings.
In order to deal with the necessary settings, you just need to create your profile, enter *99# with the access point address internet.ms.ru.
Conclusion
Newfangled operator services are opportunities that cannot be missed. The MTS operator helps all its subscribers make full use of their opportunities. Connecting a modem to different gadgets will allow you to always stay online, in the center of all events.
Nowadays it is very difficult to live without the Internet, because everyone’s life modern man, to one degree or another, is associated with World Wide Web. Work, study, leisure, entertainment - all this is on the Internet. Despite the fact that now there is Wi-Fi almost everywhere, there are still situations when there is a need to go online when there is no Wi-Fi nearby. Just then a modem comes to the rescue, providing you with fast, mobile connection. In this article we will take a closer look at how to connect and configure an MTS modem. Let's figure it out. Go!
The entire setup process is quite simple and will not take you much time. The first step, of course, is to insert the USB modem into the appropriate connector on the computer. When the operating system automatically detects the device, an autorun window will open, where you will need to click “Run AutoRun.exe”. If you have autorun disabled, run "AutoRun.exe" through "My Computer".
After this, the installation wizard will open. Select the language that is convenient for you and click the “OK” button. Next, follow the simple instructions of the installation wizard.
When finished, open the Connect Manager utility through the shortcut that appears on your desktop. After just a couple of seconds, a signal will be detected. Please note that signal strength may vary depending on position (this applies to some modem models).
By default, the modem has all the necessary settings so that the user can easily connect to the network. To connect, simply open the “Connect” menu and click on the “Connect” button.
If desired, the user has the opportunity to perform manual setting. To manually configure the modem, go to the appropriate section of the program menu. Open the “Network” category to select the signal format - 3G or EDGE/GPRS. Click Manual to set the parameters yourself. You can also set a PIN code to increase security by opening the corresponding menu section.
To change some additional modem parameters, you will have to go to Device Manager. Find the “Modems” item in the list and expand it. Then click right click mouse over the device and select “Properties”. In the window that opens, you can activate error handling mode, information compression, and hardware control flow.
Now you will know how to install an MTS 3G modem on a laptop. Write in the comments whether you managed to figure out the issue, share your opinion regarding the use of modems with other users, and ask everything that interests you on the topic discussed.
The article discusses options for automatic and manual installation on Windows 7,Windows Vista,Windows XP,Windows CE for Pocket PCs, Windows Pocket PC 2003 Premium for Pocket PCs, for Palm Pocket PCs, for Windows Mobile 6 Professional.
This article will help you install the program on your chosen platform.
Program properties
MTS Connect Manager is designed to automatically configure your computer to access the Internet and use MTS Connect (3G) services from MTS, Mobile GPRS Internet, Hyper.NET, HyperActive.
MTS Connect Manager
Program description
mts manager will install the entire set of drivers on your computer, and you can access the Internet using a modem or phone with one click.
Automatically configures MTS Connect (3G) services from MTS, Mobile GPRS-Internet, Hyper.NET, HyperActive.
For work, you are provided with a convenient and personal menu.
You will be able to see the entire report on traffic consumption and connection speed.
You have access to information on the amount of information transmitted and received.
In MTS Connect Manager it is displayed average speed reception and transmission.
With the help of the manager, you can receive and send SMS messages directly from your computer via a connected USB modem or mobile phone.
The program displays signal strength, network coverage, battery charge and network name if you are roaming.
To install MTS Connect Manager you will need-
1) Computer, laptop, netbook or tablet device.
2) Phone or 3G usb modem.
3) MTS SIM card with an activated Internet tariff.
Connection procedure
1) Install MTS Connect Manager on your computer, laptop, netbook or tablet device.
2) Connect a 3G usb modem or mobile phone to a computer (or other device) with using Bluetooth,infrared connection or cable.
3) Launch Connect Manager. In the case of a singing installation, the program will independently find the modem and install the necessary drivers that are needed to connect the device to the Internet.
4) Select from the list of services - MTS, Mobile GPRS-Internet, Hyper.NET, HyperActive, required for you and connect.
Manual tuning if automatic tuning does not work correctly.
For the right self-configuration you need to do the following −
1)Connect your mobile phone to your computer using a special cable, via an infrared port or a Bluetooth connection
2) Configure the computer settings in accordance with the operating system of your computer
Windows 7 Settings
How to install a modem correctly
Turn on the infrared port on your phone.
.
. Once the driver installation is complete, the following message will appear: “The standard modem via infrared connection is installed.”
.
Install the software for the PCMCIA card.
Insert the PCMCIA card into the special “slot” on the computer.
A message will appear at the bottom of the screen: “Installing software device driver."
Wait for the message: “Standard modem installed.”
Connect your phone and computer using a cable.
Open on your computer: Start -> Control Panel -> Phone and Modem.
.
.
.
Select the required modem and begin setting up the modem.
If the Bluetooth modem is built-in and initial settings Bluetooth are produced, then you need:
turn on Bluetooth on your phone;
After connecting your phone and computer, select Start -> Control Panel ->
If used for Bluetooth connections adapter (or the built-in modem is not configured), then you must first install the Bluetooth software (from the disk). Next you will need:
to plug bluetooth adapter into the USB connector and, if necessary, continue setting the parameters. Turn on Bluetooth on your phone.
through the Bluetooth settings installation wizard, search necessary equipment(phone);
after the equipment is found, you must select it and enter confirmation codes for further installation. To do this, enter the same combination of numbers on the computer and phone (for example: 1234);
After connecting your phone and computer, select Start -> Control Panel -> Phone and Modem. The modem will be detected automatically and you can begin setting up the modem
How to set up a modem
Open on your computer: Start -> Settings -> Control Panel -> Phone and Modem
(If the “Phone and Modem” section is opened for the first time, the “Location Information” window may appear. You must enter “ Telephone code cities” – 495, and select “Dialing type” – tone dialing. Click "OK")
In the “Modem Properties” window, on the “General” tab, click the “Change defaults” button
How to set up a connection
Open on your computer: Start -> Network -> Network and Sharing Center shared access" -> "Setting up a connection or network" ->
In the window that opens, enter:
phone number:
Attention! You must enter all characters without spaces
username: mts
password: mts
password confirmation: mts
Click “Connect” – the connection progress will be displayed
If the connection is successful, the “Internet connection is ready to use” window appears. Close this window.
You can start browsing the Internet.
For additional connection settings
Open on your computer: “Start” -> “Control Panel” -> “Network and Sharing Center” -> “Change adapter settings”
Select the previously created MTS GPRS connection and click on “Properties”. In the “General” tab, disable “Use dialing rules”.
Select the “Network” tab and make sure that in the list of “Components used by this connection” only “Internet Protocol (TCP/IP)” and “Scheduler” are selected QoS packets».
Select Internet Protocol (TCP/IP) and click Properties. In the window that opens, mark:
;
.
;
.
How to get online
Open on your computer: Start -> “Control Panel” -> “Network and Sharing Center”, then click “Connect to a network”. Select the created connection and click the "Connection" button.
Windows Vista Settings
When connecting via infrared:
Turn on the infrared port on your phone
Place the phone's infrared port opposite the computer's infrared port at a distance of no more than 10 cm
Wait for the IR communication icon to appear in the lower right corner of the monitor - the connection is established
A message will appear at the bottom of the screen: “Installing device driver software.”
When the driver installation is complete, the following message will appear: “The standard modem via infrared connection is installed”
Start setting up your modem
When connecting using a PCMCIA card:
Install software for PCMCIA card
Insert the PCMCIA card into the special “slot” of the computer
A message will appear at the bottom of the screen: “Installing device driver software.”
Wait for the message: “Standard modem installed”
Start setting up your modem
When connecting via a USB cable, the modem must be installed manually:
Connect your phone and computer using a cable
Open on your computer: Start -> Control Panel -> Phone and Modem
In the window that opens, select the “Modems” tab and click the “Add…” button.
In the “Found New Hardware Wizard” window, check the “Do not detect modem type (select from list)” box and click “Next”
In the “Modem Installation” window, click “Install from disk” and select from which disk (from which folder) your modem will be installed
Specify the path to the modem driver by selecting “Browse” and specifying the folder in which the modem driver is located.
Select the required modem and start setting up the modem
When connecting via Bluetooth, the modem must be installed manually:
1. If the Bluetooth modem is built-in and the initial Bluetooth settings have been made, then you must:
a) turn on Bluetooth in your phone;
d) after connecting the phone and computer, select Start -> Control Panel -> Phone and Modem. The modem will be detected automatically and you can begin setting up the modem
2. If you use a Bluetooth adapter to connect (or the built-in modem is not configured), then you must first install the software for Bluetooth (from the disk). Next you will need:
a) connect the Bluetooth adapter to the USB connector and, if necessary, continue setting the parameters. Turn on Bluetooth on your phone.
b) through the Bluetooth settings installation wizard, search for the necessary equipment (phone);
c) after the equipment is found, you must select it and enter confirmation codes for further installation. To do this, enter the same combination of numbers on the computer and phone (for example: 1234);
d) after connecting the phone and computer, select Start -> Control Panel -> Phone and Modem. The modem will be detected automatically and you can begin setting up the modem
How to set up a modem
Before setting up the modem, make sure that the phone is connected to the computer.
Open on your computer: Start -> Settings -> Control Panel -> Phone and Modem
In the window that appears, select the “Modems” tab
(If the “Phone and Modem” section is opened for the first time, the “Location Information” window may appear. You must enter the “Telephone area code” - 495, and select “Dialing type” - tone dialing. Click “Ok”)
Select your installed modem and click the "Properties" button
In the “Modem Properties” window, on the “General” tab, click the “Change settings” button
Next, select the “ Extra options connections."
In field " Additional commands initialization" enter the modem initialization line:
AT+CGDCONT=1,”IP”,”internet.mts.ru”
Attention! You must enter all characters without spaces
7. Click “OK” - the modem is configured, proceed to setting up the connection
How to set up a connection
Before setting up the connection, make sure that the phone is connected to the computer.
Open on your computer: Start -> Network -> “Network and Sharing Center” -> “Set up a connection or network” -> “Settings” telephone connection Internet connection via telephone network»
In the “Telephone Connection Setup” window, specify the modem through which the connection will be made:
In the window that opens, enter:
name of the new connection: MTS GPRS
phone number:
if you have a phone brand: SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
username: mts
password: mts
password confirmation: mts
Click “Connect” – the connection progress will be displayed
If the connection is successful, you are prompted to begin browsing the Internet.
To do this, in the “Network location setup” window, you must select the location for the “MTS-GPRS” network (optional)
For additional settings connections
Open on your computer: “Start” -> “Network” -> “Network and Sharing Center”
Select the previously created MTS GPRS connection and click on “Properties”
In the “General” tab, disable “Use dialing rules”
Select the "Network" tab and check that:
in the list of “Components used by this connection” only “Internet Protocol (TCP/IP)” and “QoS Packet Scheduler” were selected
Select "Internet Protocol (TCP/IP)" and click "Properties"
In the window that opens, mark:
Obtain an IP address automatically
Obtain DNS server address automatically
Click the "Advanced..." button, and in a new window:
check the box “Use default gateway for remote network”
disable the option “Use IP header compression”
Click “OK” - the connection has been created, try to access the Internet
How to get online
Connect your phone to your computer
Open on your computer: Start -> Connections -> Control Panel -> MTS GPRS
Windows XP Settings
How to install a modem correctly
When connecting via infrared:
Turn on the infrared port on your phone
Place the phone's infrared port opposite the computer's infrared port at a distance of no more than 10 cm
Wait for the IR communication icon to appear in the lower right corner of the monitor - the connection is established
Then a window with the name of the phone will appear - the modem is installed
Start setting up your modem
When connecting using a PCMCIA card:
Insert the SIM card into a special “slot” on the computer
Wait for the message about the successful installation of the “Standard PCMCIA modem” to appear.
Start setting up your modem
When connecting via cable or Bluetooth, the modem must be installed manually:
Connect your phone and computer using a cable or turn on Bluetooth on your phone
Open on your computer: Start -> Settings -> Control Panel -> Phone and Modem
In the window that opens, select the “Modems” tab and click the “Add…” button.
In the “Found New Hardware Wizard” window, check the “Do not detect modem type (select from list)” box and click “Next”
In the “Modem Installation” window, click “Install from disk” and select from which disk (from which folder) your modem will be installed
In the next window select the required modem(your phone model) and click “Next”
Specify which port to install the modem on (for example, COM 1), click “Next”
After the incompatibility warning operating system and modem click “Continue Anyway”
Wait for the message “Modem installed successfully” to appear, click “Finish” and start setting up the modem
How to set up a modem
Before setting up the modem, make sure that the phone is connected to the computer.
Open on your computer: Start -> Settings -> Control Panel -> Phone and Modem
In the window that appears, select the “Modems” tab
Select your installed modem and click the "Properties" button
In the “Modem Properties” window, select the “Advanced communication parameters” tab
In the “Additional initialization commands” field, enter the modem initialization line:
AT+CGDCONT=1,”IP”,”internet.mts.ru”
Attention! You must enter all characters without spaces
Click “OK” - the modem is configured, start setting up the connection
How to set up a connection
Before setting up the connection, make sure that the phone is connected to the computer.
Open on your computer: Start -> Settings -> Control Panel -> Network connections
Select “Create a new connection” - the “Create Network Connection Wizard” will open, click “Next”
Check "Connect to the Internet" and click "Next"
Select "Set up a connection manually" and click "Next"
In the window that opens, check “Via regular modem" and click "Next"
From the list, select your installed modem and click “Next”
In the window that opens, enter:
name of the new connection: MTS GPRS
phone number:
if you have a phone brand: Alcatel, Siemens, Panasonic: *99***1#
if you have a phone brand: Samsung: *99**1*1#
Attention! You must enter all characters without spaces
username: mts
password: mts
password confirmation: mts
9. Open on your computer: Start -> Settings -> Control Panel -> Network Connections -> MTSGPRS
10. In the “Connect to MTSGPRS” window, click the “Properties” button
11. In the “General” tab, disable “Use dialing rules”
12. Select the “Network” tab and check that:
in the line “Type of remote access server to connect” the following was selected:
"PPP: Windows 95/98/NT4/2000, Internet"
in the list of “Components used by this connection” only the following were selected:
"Internet Protocol (TCP/IP)" and "QoS Packet Scheduler"
13. Select "Internet Protocol (TCP/IP)" and click "Properties"
14. In the window that opens, mark:
Obtain an IP address automatically
Obtain DNS server address automatically
15. Click the “Advanced...” button, and in a new window:
check the box “Use default gateway for remote network”
disable the option “Use IP header compression”
16. Click “OK” - the connection has been created, try to access the Internet
How to get online
Connect your phone to your computer
Open on your computer: Start -> Settings -> Control Panel -> Network Connections -> MTSGPRS
In the “Connect to MTSGPRS” window, click the “Call” button
Wait until the “two computers” icon appears on the taskbar - the connection is established. If you want to end the connection, right-click on the "two computers" icon and select "Disconnect".
Recommendations for Windows setup XP for 3G network
To optimize data transfer speeds on a 3G network, it is recommended to configure the 'TCPWindowSize' parameter in the Windows XP registry. To do this, you can use one of two methods:
1. Download the file to your computer and run it, then restart your computer.
2. Edit the registry manually. For advanced users only!
Make changes to the registry manually by following these steps:
1. In the “Start” menu, select “Run”, type regedit and click “OK”
2. Go to the registry branch HKEY_LOСAL_MACHINE’SYSTEM’CurrentControlSet’Services’Tcpip’Parameters
3. In the parameters window, right-click and select “New -> DWORD Value”
4. Enter the name of the TcpWindowSize parameter
5. Right-click on the created parameter and select “Edit”
6. Enter hexadecimal value faf0, then click "OK"
7. Make sure the line is created
TCPWindowSize REG_DWORD 0x0000faf0
8. Reboot your computer.
Windows CE Settings for Pocket PCs
How to set up your computer
1. Connect your phone to your computer using infrared, Bluetooth or cable
2. Open on your computer: “Start” -> “Settings” -> “Connections”
3. Select the “Dialing Locations” tab and click the “New” button
4. In the window that opens, specify “New location name: Mobile” and click “OK”
5. In the next window, select “Tone Dialing”, clear the “Area code” and “Country code” fields
6. Select “Dialing Patterns”, delete all codes except “G” or “g” and click “OK”
7. Open the “Connections” tab again and click the “Modify” button
8. On the “Modem” tab, click “New...”
9. In the “Make New Connection” window, in the “Enter name for the connection” line, enter MTS GPRS
10. In the “Select a modem” field, select “Generic IrDA modem, Bluetooth Connection” (if the phone is connected to the computer via IR or Bluetooth) or “Internal modem” (if connected via a cable)
11. In the “Baud Rate” field, select a speed of 57600 or 115200 bps and click the “Advanced” button
12. In the window that opens, open the “Port Settings” tab and check that:
Data Bits – 8
Party – None
Stop Bits – 1
Flow Control – Hardwar
Attention! Make sure all fields in the Terminal section are disabled
13. Open the TCP/IP tab, enable automatic assignment of an IP address, and disable the “Software compression” and “IP-header compression” items
14. On the “Name Servers” tab, select “Use server-assigned addresses” and click “OK”
15. On the page where you specified the connection name – MTS GPRS, click “Next”
16. In the “My Connection” window, type:
in the “Phone number” field:
if you have a phone brand: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
if you have a phone brand: Alcatel, Siemens, Panasonic: *99***1#
if you have a phone brand: Samsung: *99**1*1#
in the “Extra dial-string modem commands” field, enter: +CGDCONT=1,”IP”,”internet.mts.ru”or AT+CGDCONT=1,”IP”,”internet.mts.ru”
Attention! You must enter all characters without spaces
17. Click the “Finish” button - the computer is configured, try accessing the Internet
How to get online
1. Connect your phone to your computer
2. Open on your computer: “Start” -> “Settings” -> “Connections” -> MTS GPRS
3. Select “Connect” and in the new window enter:
username: mts
password: mts
4. Click the "Connect" button
5. Wait until the “two arrows” icon appears at the top of the screen - the connection is established
If you want to disconnect, click on the two arrows icon and select Disconnect.
Windows Pocket PC 2003 Premium settings for pocket computers
How to set up a computer when connecting a phone via infrared
Turn on the infrared port on your phone
Place the phone's infrared port opposite the computer's infrared port at a distance of no more than 10 cm
Open on your computer: Start -> Settings -> Connections
In the “Connections” window, select the “Advanced” tab, and in the next window - “Select networks”
Select "New" and in the "Provider" window enter the name: IR Connections
On the “Proxy server settings” tab, check the “This network is connected to the Internet” field, leave the rest of the fields blank
Select the “Modems” tab and click the “Create” button
In the “Create a new connection” window, enter the connection name: MTS GPRS-IR, select the modem: Generic IrDA and click “Next”
In the next window, enter your phone number:
if you have a phone brand: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
if you have a phone brand: Alcatel, Siemens, Panasonic: *99***1#
if you have a Samsung phone: *99**1*1# and open the link “Use dialing rules”
Attention! You must enter all characters without spaces
10. In the window that opens, disable the “Dialing Rules” item, click “OK” and in the next window click “Next”
11. In the new window, check the settings:
user: mts
password: mts
leave the Domain field blank
12. Click the "Advanced" button and install following parameters:
speed: 115200 or 57600
uncheck the “Wait for dial tone” field (not for all phones)
Attention! You must enter all characters without spaces
13. Select the “Port Settings” tab and check the following parameters:
Data: 8
Parity: No
Stop bits: 1
Control: Hardware
14. Open the TCP/IP tab, enable the “IP address is assigned by the server” item, and disable the “Use SLIP”, “Software compression” and “IP header compression” options
15. On the “Servers” tab, enable the “Address is assigned by the server” option, leave the values in the WINS fields zero
16. Click “OK” and then “Finish” - the computer is set up, try to access the Internet
How to set up your computer when connecting your phone via Bluetooth
Turn on Bluetooth on your phone
Open on your computer: Start -> Settings -> Systems -> Bluetooth
In the “Bluetooth Settings” window, select the “Accessibility” tab and set:
name: any name of your computer
check the box “Other devices can connect”
select "Linked devices only"
Uncheck the box “Can be seen by other devices”
4. On the “ Remote access to the network":
enable the options: “Enable service”, “Authorization required” and “Identification required (Passkey)”
in the “Speed” field set 57600 or 115200
in the “Control” item select “Hardware (RTS/CTS)”
5. Close the Bluetooth Setup window
6. Open on your computer: Start -> Settings -> System -> Bluetooth
7. In the window that opens, select “Set up a connection in the Manager”
8. In the “Setup Wizard” select “New” and in the new window select “Internet via phone”
9. In the “Bluetooth Connection Wizard” window, select your phone model and click “Next”
10. Set up the Bluetooth connection according to your phone's instructions
11. In the next window, select your phone model
12. In the new window, enter the “key” - any numbers (do not specify letters!), enter the same numbers in the phone menu, click “Next”
13. In the next window, check the “Use as standard connection to the Internet”, and in the phone menu select your computer and click “Next”
14. In the Bluetooth Connection Wizard window, enter:
connection name: MTS GPRS-BT
country code: 7
area code: 495
phone number:
if you have a phone brand: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
if you have a phone brand: Alcatel, Siemens, Panasonic: *99***1#
if you have a phone brand: Samsung: *99**1*1#
Attention! You must enter all characters without spaces
16. Select the connection icon (two arrows), in the “Connection” window select “Settings”
17. In the Connections window, select Manage existing connections
18. In the “Bluetooth Settings” window, select your connection – MTS GPRS-BT and click “Edit...”
19. In the “MTS GPRS-BT” window, select the “Bluetooth Dialup Modem” and click “Next”
20. Make sure there is no checkmark in the “Dialing Rules” field and click “Next”
21. In the next window, enter:
user: mts
password: mts
22. Leave the “Domain” field empty, click “Advanced...” and set:
speed: 115200 or 57600
uncheck the “Wait for dial tone” box
in the “Additional dialing commands” field enter: +CGDCONT=1,”IP”,”internet.mts.ru”or AT+CGDCONT=1,”IP”,”internet.mts.ru”
Attention! You must enter all characters without spaces
23. Select the “Port Settings” tab and set:
Data: 8
Parity: No
Stop bits: 1
Control: Hardware
Attention! Make sure all fields in the Terminal section are disabled
24. Open the TCP/IP tab, enable the “IP address is assigned by the server” item, and disable the “Use SLIP”, “Software compression” and “IP header compression” options
25. On the “Servers” tab, enable the “Address is assigned by the server” option, leave the values in the WINS fields zero
26. Click “OK” and then “Finish” - the computer is set up, try to access the Internet
How to get online
Connect your phone to your computer
Click on the connection icon (two opposing arrows with a cross) and select the link with the name of the connection - MTS GPRS-BT
Wait until the arrows become stationary without a cross - the connection is established
If you want to end the connection, click on the two arrows icon and select Disconnect.
Settings for Palm handheld computers
First, try setting up your computer using the example of setting up Palm OS. If you are unable to access the Internet (an error about an incorrectly dialed number or Error: PPP timeout will appear), select the Palm VS setup method.
In the case of plug-in Bluetooth module(for example Compact Flash Bluetooh adapter) you may need to install external device drivers.
Palm OS
How to set up a modem
In the “Edit” window, in the “Name” line, enter the name of your connection: GPRS-IR-Modem-57600
Next, select from the drop-down lists:
in the “Connection Method” field: IrCOMM to Modem
in the “Dialing” field: TouchTone
in the “Volume” field: Off
6. Click the “Details” button: in the “Speed” field set the value to 57600 or 115200, and in the “FlowCtl" select Automatic or On
7. Close the “Details” window by clicking the “OK” button
8. In the "Init String" field, enter:
+CGDCONT=1,”IP”,”internet.mts.ru”or
AT+CGDCONT=1,”IP”,”internet.mts.ru”
Attention! You must enter all characters without spaces
9. Click “OK” - the modem is configured, proceed to setting up the connection
How to set up a connection
On your computer, open the “House” icon and select “Prefs” from the list
In the new window, fill in the fields:
Service: MTS-GPRS
User Name: mts
Password: mts
Phone:
if you have a phone brand: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
if you have a phone brand: Alcatel, Siemens, Panasonic: *99***1#
if you have a phone brand: Samsung: *99**1*1#
Attention! You must enter all characters without spaces
5. Uncheck the following items: “Dial prefix”, “Disable call waiting” and “Use calling card”
6. Click the “Details” button and set the following parameters:
Connection type: PPP
Idle timeout: Power Off
check the “QueryDNS” and “IPAddress” fields
How to get online
Connect your phone to your computer
In the "Preferences" window, click on the triangular arrow in the upper right corner and select "Network"
Click the "Connect" button
Palm Vx
How to set up a modem
On your computer, open the “House” icon and select “Prefs” from the list
In the Preferences window, click on the triangular arrow in the upper right corner and select Connection
In the connection selection list (via modem, via IR communication, etc.), click “New”
In the window that opens, in the “Name” line, enter the name of your connection: IR-PC-57600, and in the “Connection Method” field, select IrCOMM to PC
Click the "Details" button: in the "Speed" field set the value to 57600 or 115200, and in the "FlowCtl" select Automatic or On
Click “OK” - the modem is configured, start setting up the connection
How to set up a connection
On your computer, open the “House” icon and select “Prefs” from the list
In the Preferences window, click on the triangular arrow in the upper right corner and select Network
Press "Menu" and select "New"
In the new window, fill in the fields:
Service: MTS-GPRS
User Name: mts
Password: mts
Connection: GPRS-IR-Modem-57600 (previously created connection)
Phone:
if you have a phone brand: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
if you have a phone brand: Alcatel, Siemens, Panasonic: *99***1#
if you have a phone brand: Samsung: *99**1*1#
Attention! You must enter all characters without spaces
5. Click the “Details” button and set the following parameters:
Connection type: PPP
Idle timeout: Power Off
check the “Query DNS” and “IP Address” boxes
6. Click the “Script” button and in the “Log in Script” window enter:
Send: ATZ
Send CR
Send: AT+CGDCONT=1,”IP”,”internet.mts.ru”
Send CR
Send:
if you have a phone brand: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: ATD*99#
if you have a phone brand: Alcatel, Siemens, Panasonic: ATD*99***1#
if you have a phone brand: Samsung: ATD*99**1*1#
Send CR
End
7. Click “OK” - the connection is configured, try to access the Internet
How to get online
Connect your phone to your computer
In the Preferences window, click on the triangular arrow in the upper right corner and select Network
Click the "Connect" button
The “Service Connection Progress” window will show the connection status, wait for the message “Established” - the connection is established
If you want to disconnect, click the Disconnect button in the Network window.
Settings for Windows Mobile 6 Professional
Settings for accessing WEB sites via GPRS
Click Start to enter the menu. Select Settings and select the Connections tab. Select the Connections icon and execute following settings:
In the My Internet Provider (“My ISP”) section:
Select the item “Add new modem connection”
Enter connection name: MTS.
Select a modem: Cellular Line (GPRS)
Click Next on the display.
Access point name: internet.mts.ru<при использовании Real IP: realip.msk>; Click Next on the display.
User name: mts;
Password: mts;
Domain: not filled in
Press the Advanced key on the display.
Select the TCP/IP Protocol tab and make the following settings:
Use server-assinged IP address: mark with a dot
Use software compression(Use software compressxions): uncheck
Use IP header compressions: uncheck the box. Select the Servers tab and make the following settings:
Use server-assigned addresses (mark with a dot)
Press OK on the display. Press Done on the display
To access the Internet
Click Start to enter the menu. Select Settings and select the Connections tab. Select the Connections icon. In the My ISP section, select Manage existing connections. Press and hold on the MTS connection and select Connect from the submenu that appears. Then you can open Internet Explorer.
Settings for accessing WEB sites via Mobile Office
Click Start to enter the menu. Select Settings. Select the Connections tab. Select the Connections icon and make the following settings: In the My Internet Provider section, select Add a new connection via modem
Enter connection name: MTS;
Select modem: Cellular line;
Click Finish
To access the Internet
Click Start to enter the menu. Select Settings and select the Connections tab. Select the Connections icon:
Under My Internet Provider, select Manage existing connections. Press and hold on the MTS connection and select Connect from the submenu that appears. Then you can open Internet Explorer.