Let's explore the question of how to set a password on WiFi.

The topic of this article is how to set a password for a WiFi network. Such networks are widespread. Almost every home already has wireless router or modem. But the manufacturer does not install keys for connecting via wireless communication. This is done so that the buyer can freely enter the settings menu and set their values.

It is worth noting that after purchasing and connecting to the interface for the first time, the manufacturer strongly recommends installing new key to access settings. On some router models, the user is not even given the right to choose. That is, you will definitely have to change your login and password. It is also recommended to make security settings.

So, how to set a password for a WiFi network. First, let's answer the question why this is necessary. The fact is that the access point, be it a router or wireless modem, has a fairly large range of action. This means that not only you will be able to connect to the created group.

Very often, this is used by attackers or simply lovers of “freebies”. But if you do not have unlimited Internet (service package from your provider), then such unauthorized guests can greatly harm you. In addition, you risk losing confidential data or getting a virus on your computer. Therefore, manufacturers wireless equipment It is strongly recommended to set complex passwords.

How to set a password on WiFi: Video

How to encrypt your home Wi-Fi network

So we come to the main question, how to set a password on private network WiFi. As you already know, to organize such groups, routers, modems or other devices with a wireless adapter are used. IN in this case We will talk specifically about routers. All security settings are set in the router settings. So first, let's enter the device settings menu.

We will look at how to set a password for a WiFi Internet connection using the D-LinkDIR-615 router as an example. So, we connect to the device using a cable or wirelessly. Now you need to open your browser. IN address bar register the IP of your router. In my case, the address is 192.168.0.1.

It is worth noting that this IP address is used in most cases. But, sometimes you can find these - 192.168.1.1, or 192.168.2.1. As a rule, all the necessary data is indicated in the instructions for the device or on the router itself (carefully inspect the router from all sides).

How to easily find out the IP address of a WiFi router: Video

Press "Enter". Now the system asks you to enter your username and password. Initially, the equipment manufacturer sets the following values ​​- admin, admin, respectively. Click “Ok” and get to the settings menu.

How can I set a password for my home Internet WiFi here? Everything is very simple. At the bottom of the screen you need to find and click the “Advanced settings” button. After this there will be several additional windows. We are interested in the “WiFi” section, where you should enter the security settings.

In the window that opens, you can change only one parameter - network authentication. This is nothing more than a type of encryption. The default value is “Open”. This means that your network is not currently protected in any way. So, we need to choose the encryption type. It is recommended to install WPA-PSKWPA2-PSKmixed as this is the strongest cipher that provides high level protection.

After this, a line will appear in which you must enter the key. In some cases, the system automatically generates secure code and offers it. You, in turn, can leave it or change it to your own. After that, click “Apply”. That's all, now you know how to place it.

How to connect to a WiFi router: Video

But what if you are using a modem and not a router? How to set a password for a wireless Internet WiFi modem? Everything is extremely simple. The fact is that the settings of the wireless router are absolutely identical to the modem settings. These devices work in a similar way. The only differences are in the names of some sections. However, the setting principle is the same.

Just as with a router, you need to connect to the device and enter the IP address in the browser. After this, enter your login and password (admin, admin) and get to the modem menu. Find WiFi settings here and open security options. Then everything is as described above. Now you know the answer to the question of how to set a password for a private WiFi network. This will increase the level of security and prevent unauthorized connections by intruders.

If it so happens that your WiFi router provides an unsecured Internet access point, and you want your Internet to be used exclusively by you, then it will be useful to know how to set a password for WiFi router. Manufacturers such as: D-link, TP-Link, Zyxel and others. On the blog, I have already discussed this issue in several of my articles, but this article will be different in that I will talk not about one router model (as I did for the example), but several, and to be even more precise, I will talk about the most popular router manufacturers.

Of course, I won’t be able to cover the large circle of manufacturers that we currently have, but after reading the article, I think you will definitely have an idea of ​​how to change the WiFi password.

In order to protect your access point with a password, you need to configure the router by going to its settings. You will need to find out the router's IP address to gain access to its control panel.

How to find out the IP address of the router, login and password to configure it

The easiest way to find out the IP address of your router is to carefully inspect its case. Most often, the IP address is indicated on it. It may also contain the username and password that you will need to log into the control panel. In addition, the IP address, login and password can be specified in the router manual. You can also view them on the official website of the manufacturer.

Here's an example:

If the described methods did not help you or for some reason turned out to be difficult to implement, then there is the most accurate and accurate method for determining the router address. Go to Network and Sharing Center. This can be done by clicking the tray icon in the Windows taskbar and clicking on the corresponding inscription.

Once in the network control center and shared access, click on the left “Change adapter settings”, thereby opening the list available connections. Find “Local Area Connection" (if your router is connected via cable) or "Wireless network connection" (if you are connected to the router via a wireless connection, that is, WiFi) and click on the icon right click mouse, select “Status”.

Then click Details. The router's IP address is indicated next to the "Default gateway IPv4" line.

Attention! This method will help you when you can connect to your router via WiFi or cable. If you are only going to customize it, then this is not for you!

If DHCP is not configured on the router, then read the articles I gave above. There you will find out what needs to be done.

Now that we have found out the IP address of the wireless router, it's time to start setting it up. To do this, enter the router's IP address in the browser's address bar and press Enter. The login page for the router control panel will open, in which we will need to enter the username and password. More often these values both fields "admin". Manufacturers have options: admin and an empty password, user – user, administrator – administrator, administrator and an empty password.

But again I want to remind you, so as not to guess, you can familiarize yourself with this information in technical documentation, which comes with the router, or carefully inspect the router at the bottom. Once you have accessed the control panel, you can now move on to the core part of our procedure, which is how to set a WiFi password.

TP-LINK

How to set a WiFi password in TP-LINK: on the left in the menu, find the “Wireless” section, the “Wireless Security” subsection. In the main part, select “WPA-PSK/WPA2 PSK”. In the “Wireless password” field, enter the desired password (at least 8 characters). Click the "Save" button and reboot the router.

Now to connect to your router you will need to enter a password.

ZyXEL

Having gone into the control panel of the router, we find the “Wi-Fi Network” section on the left and select the “Security” subsection in it. The Settings window appears Wi-Fi security" Opposite the “Authentication” line, select “WPA-PSK/WPA2-PSK” from the drop-down list, and opposite the “Network key (ASCII)” line, enter the password we created. Click “Apply” and reboot the router:

D-Link

We discussed above horizontal menus controls, and now let's look at vertical ones from D-Link manufacturers. How to set a WiFi password in D-link: having opened the control panel, click “Wi-FI” and select “Basic settings”:

In the window that opens, set the network name (SSID) and click “Change”. This needs to be done if you have not used the WiFi function in your router. If your router has already distributed WiFi and you just need to set a password, then go to the “Security Settings” tab.

In this tab you just set the WiFi password. Select the encryption type “WPA2-PSK”, in the line “PSK encryption key” enter your invented password for the access point. Click “Change” and reboot the router.

Note: in each case I told you to reboot the router after changing the password and this moment is sometimes very important so that everything goes smoothly. Sometimes, when changing settings in the router, problems occur and in order for all the changes to be applied, just in case, it is better to reboot the router. Although this is not necessary, you should be aware of it.

It happens that you did not buy a new router in a store, but borrowed it from a friend or bought it used. In this case, the default settings of the manufacturer can be changed in the router, that is, for example, the IP address, login and password for logging into the router control panel can be changed. In this case, you need to reset the router to factory settings. How it's done?

Routers have a button on the back panel that is pressed with a thin object, such as a pin. With the router turned on, press and hold it pressed for 6-10 seconds. After this, the IP address will again become 192.168.1.1 or 192.168.0.1, the login and password will be “admin”.

Important! Please note that all router settings will be reset, namely provider settings, passwords, access points, IP addresses, etc... Therefore, before general reset, write down or remember everything that may be useful to you.

We have just figured out how to set a password for a Wi-Fi router. In principle, all the steps are the same: find the tab with the wireless connection settings, and then enter your password in the appropriate field. The main thing is to take your time and everything will be fine! But before setting a Wi-Fi password in the router, you can look up this password in Windows - this procedure is easier, as you don’t have to deal with IP addresses, logins and passwords. Read about this method using the links given at the beginning of the article.

Video with an example of how you can set a password on WiFi:

Wi-Fi is a unique technology that provides wireless network access from any device (tablet, smartphone or computer). For this access to work smoothly, competent customization is required Wi-Fi networks and a device that guarantees its operation - a router. A router or router is a device that provides capabilities for the reliable operation of a Wi-Fi network. In order for Wi-Fi to function stably and without failures, the router must be configured correctly. Brief instructions for setting up a wireless network and equipment -.

In the material presented to your attention, I will tell you how to set a password for a Wi-Fi router, as well as how to set a password for a Wi-Fi network so that outside users could not connect to your network and use Wi-Fi from their devices. It's about ASUS router RT-N12E_B1, since devices of this trademark They are quite popular in the user environment, reliable, easy to configure and available on the market.

How to set a password on an ASUS router with Wi-Fi access?

The first thing you need to do before setting a password is to connect the computer with which you plan to configure the router to the router itself using a wire. The cord from the provider is connected to the WAN port of the device, and the double-sided PC cable is connected to the LAN port.

When the cable is properly connected, you first need to go to the router settings configuration page, where you set the parameters for accessing the provider. To know which address to access this page, turn the device upside down and look at the bottom cover for the IP address, which can be used to get to the settings web page. The login and password used to log in by default are also indicated here.

As you can see, the specified IP address is 192.168.1.1. You can get to the web page to configure the router using your login admin with password admin, but such authentication data is available on all devices without exception for configuring Wi-Fi, so this password should be changed in any case in order to protect your router from hacking. Read about what passwords you should use.

So, let's go to the above address. As a result, we got to the device configuration web page. We go to the “Administration” section and there we go to the “System” tab.

As you can see, there is a “Change router password” field here. It is here that we can change the password for our device by entering the updated value in the “ New password" field and confirming it in the " Re-enter New Password».

So, we changed the password. Now you need to apply the changes and save them to the device. Scroll the page to the very bottom and find the “Apply” button. Let's click it.

Ready. The device will now reboot for the changes to take effect. We log in with a new password.

How to set a Wi-Fi password on a router?

A Wi-Fi network, like a router, needs to be administered. It is worth choosing the most optimal channel for it, installing gateways and DNS servers, and, of course, also setting a password for security. Below I will tell you how to set a password for a Wi-Fi network.

We go to the “Wireless Network” section and remain on the first tab called “General”. In the SSID field we indicate the name wireless network, which will be visible in the list of networks on your device. Another quite important field is the “Authentication Method”. Here we specify the security method that will be used for your network. At home, it would be most advisable to use the “WPA2-Personal” protocol, since it provides simple procedure authentication and is also quite reliable and stable.

The password itself is specified in the “Preliminary” field. WPA key" Come up with a value that will not be too easy for a cracker, and that will accommodate uppercase and lowercase letters, as well as interspersed with numbers. If it’s difficult for you to choose such a key yourself, use one of the online services for randomly generating profiles, of which there are plenty on the Internet.

How to set a Wi-Fi password on a D-Link router?

On devices of any other models, the Wi-Fi password is set in exactly the same way. Consider the case of the D-Link router. These routers are most often used at home, along with TP-Link. This speaks of high quality device and its excellent regional adaptation for the domestic market.

We log in using the IP address indicated on the bottom of the device. By default, as on ASUS routers, the word “admin” is used for authentication as a password and login.

If someone has already set up your device (for example, computer wizard), it is quite possible that this pair of values ​​will not work. Under such circumstances, you need to ask the person who set up your device what password he set. If this is not possible, all router parameters can be reset by pressing the handle (pressing and holding for 5-10 seconds, then releasing and waiting for about a minute) RESET button on the rear panel of the device. If you decide to perform a reset, it is important to know that all settings will be lost, and the Internet will have to be set up from scratch.

The interface varies greatly on different firmware of D-Link routers, but I will assume that you have firmware version 1.4.x or later. At the bottom of the configuration form, click on the “Advanced Settings” option, and then in the Wi-Fi section, click on the “Security Settings” category.

Here, in the “PSK encryption key” field, enter the current key with which you would like to protect your Wi-Fi connection. After that, click on the “Change” button at the bottom right. Now we are taken to the next settings page, where we will be asked to save the changes. Click “Save” and voila: you’re done.

Good afternoon, dear readers. In this article I will tell you how to set a password on a D-Link wi-fi router. Setting a password for wireless Internet (wi-fi) is necessary primarily for security and limiting access to your Internet for other users. A wireless connection is less secure than a wired one. Therefore, if you do not have a password set for wi-fi, then anyone can access the Internet through you and also gain access to your information.

So let's get started setting a password on wi-fi router D-Lin. To set a password for Wi-Fi, follow these steps.

First of all, we need to go into the settings of our router.

Step 1 . Open a browser on your computer. In the address bar, enter 192.168.1.1 . This is the address for setting up your wi-fi router.



Step 2 . Next enter the word admin in the field Username Password . Click Login to enter the main menu of the router.

Step 3 . If you entered correctlyUsername password , then you will be taken to the main menu of the router. On the right side of the window Select a section WiFi by clicking the left mouse button once. In the menu that opens, click on the linkSecurity Settings

Now almost every family has several Internet users, and in their apartment or house they connect devices to the network via a Wi-Fi router. Initially, no one thought much about how to set a password on WiFi, since there were few such devices and it was not important. Nowadays, many phones, not to mention smartphones, tablets and laptops/netbooks, have a WiFi unit, and everyone strives to take advantage of the free Internet. We will resist this!

The point is not even that you feel sorry for distributing, for example, your traffic to your neighbors. The problem is that these neighbors can excommunicate you if they want. own internet, putting the code on the input, and with good knowledge of technology - seriously harm your computer.

So the password for WiFi? This is not at all difficult if you have everything configured and working and only the desired code is missing. You need to start by logging in. Regardless of the router model, enter http://192.168.1.1 or 192.168.10.1 into the browser line. A window will appear requiring you to enter your username and password. If you haven't changed anything, it will be admin in both cases. We type and find ourselves in the device parameters. Now we will perform the following task: in order for it to require digital permission from everyone entering.

The general design of the settings section may differ slightly depending on different models, but the system itself, the essence, remains the same. We are looking for the wireless item, one of the options for the path to it is: Inetrface setup > wireless. We are considering the English version of the menu and the absence of a book with instructions, since if there is a Russian menu, any “teapot” can set up WiFi.

We find Authentication Type there, select, for example, wpa-psk, or another type of encryption, look for the very place where, finally, you need to enter the password. We enter it - and that’s it, the job is done. We save the settings, and now no one except people who know the code, will not connect to your internet. When deciding how to set a WiFi password, try to make it so that it cannot be guessed or hacked. Come up with a combination of numbers and letters no shorter than eight characters.

Pay attention to the name of your network. If it is similar to others located nearby, then change it in the SSID line. If it is still difficult for you to do all of the above, then invite a specialist or contact the technical support of your provider.

It also happens that the task of setting a password on WiFi becomes noticeably more complicated if for some reason you were unable to get into the router interface. In this case, you will have to reset all its settings. To do this, you need to press the Reset button recessed on the rear panel for a few seconds.

Next, in the same way as described above, go to its settings. In devices produced earlier, it was necessary to manually enter all the settings, first taking them from the provider, and partly from the computer’s network settings. Modern routers allow you to access the Internet almost automatically by pressing just a couple of buttons. There are quite a few of their models, and there are also many providers, so the path to access the network may differ. You can find it out from the latter, or by typing the corresponding query in a search engine. Do not forget the password itself only after completing the connection process!

Good afternoon, dear readers. In this article I will tell you how to set a password on a D-Link wi-fi router. Set a password for wireless internet(wi-fi) is necessary primarily for security and restricting access to your Internet for other users. Wireless connection less secure than wired. Therefore, if you do not have a password set for wi-fi, then anyone can access the Internet through you and also gain access to your information.

So let's get startedsetting a password for a D-Lin wi-fi router k . To set a password for Wi-Fi, follow these steps.

First of all, we need to go into the settings of our router.

Step 1 . Open a browser on your computer. In the address bar, enter 192.168.1.1 . This is the address for setting up your wi-fi router.

Step 2 . Next enter the word admin in the field Username and Password. Click Login to enter the main menu of the router.

Step 3 . If you entered correctlyUsername and password , then you will be taken to the main menu of the router. On the right side of the window Select a section WiFi by clicking the left mouse button once. In the menu that opens, click on the linkSecurity Settings.

Step 4. In the window Wi-Fi/Security Settings in field PSK encryption keyenter strong password. For advice on creating a strong password, read the article

Good day!

- Why does my Internet slow down every evening, I can’t download anything, and pages take a long time to open? - an acquaintance once asked me.

The next day, after looking at his Internet settings, programs, router, etc., I was surprised by only one thing: his home Wi-Fi network was not protected with a password (there simply wasn’t one). Oddly enough, after setting a password, the slowdowns and lags of the Internet stopped, and in the evening the Internet began to work as expected. Apparently, there were some neighbors who successfully used his Internet channel, just in the evenings everyone comes from work/school, etc.

In general, I will give one piece of advice: in any case, if you have any suspicions, change the password for the Wi-Fi network. If you don't have it at all, be sure to install it (even if you have a very fast unlimited Internet).

In this article we will look at how this is done.

Important! You also need to change your Wi-Fi password because those who connect to your network will use the Internet under your IP address. In principle, if they only occupy your Internet channel, it’s not so scary.

But just imagine, what if they commit illegal actions - the first person they come to will be you (most likely)! I think there’s no need to explain that it’s better to avoid such visits? Therefore, PASSWORD is required!

To change the password for accessing a Wi-Fi network, you need to do approximately the following:

• go to the Wi-Fi router settings;
• then open the tab/section for setting up a wireless network (also called Wireless or Wi-Fi);
• select in this tab certificate of safety, encryption type, And password to access the network.

In general, everything is quite simple. Before moving on to specific models routers and their configuration, I will focus on a few important parameters(mentioned above).

Certificate of safety

The most popular security certificates, which are found in almost every router, are WEP, WPA-PSK and WPA2-PSK. To date better security provides a WPA2-PSK certificate, which is what I recommend choosing.

If devices that do not support WPA2-PSK will connect to the Wi-Fi network, then choose the WPA-PSK option (some routers have a mixed WPA/WPA2-mixed mode).

By the way, some inexpensive models Routers may not work stably and break the connection when WPA2-PSK is selected. In this case, try limiting the speed of the router and changing the security certificate.

Encryption type

Closely related to the security certificate. If you select WPA, the temporary key integrity protocol TKIP is used; when using WPA2, the secure AES standard is used. This is exactly what I recommend starting from. If you select settings other than this, you may experience problems connecting devices to your network.

Selecting a password

Here, perhaps, I will say only the most basic things that I think about his choice. I noticed that many users put very simple passwords, type: 11111111, 2222222, 11111122222, etc. Such passwords are quickly selected and cracked.

It is unlikely, of course, that someone will purposefully and for a long time select the password for your home Wi-Fi networks (especially since the vast majority of them do not contain any valuable data), and nevertheless I will give a couple of tips on what the password should be:

At least 8 characters;

It is advisable to use both letters (Latin) and numbers (of course, some will also say special characters - but in my opinion it’s not worth it, it’s too tedious to type them later on a phone or tablet when connected to the network);

Do not use your names, standard words (password, admin, computer, etc.), the most known dates etc.

Now let's move on to specific router models. So...

You might find this article useful on how to enter your router settings. In some cases this cannot be done (link is given below)...

How to log in via 192.168.1.1: entering the router settings -

D-Link

One of the most popular brands of routers in our country. There are enough of them a large number of models, but firmwares that differ from each other (fundamentally) - not so many, 3-4 pieces. In this article I will give several of their variations, and first a few important parameters.

IP address (default) to enter settings: http://192.168.0.1

(it is advisable to use a browser Internet Explorer)

Login(default): admin

Password(default): either an empty string or the same admin.

In older router models (such as DIR-300, DIR-320, DIR-615, DIR-651), as a rule, the firmware is not translated into Russian and is presented in this orange-gray design. To change the password, you need to go to the router settings (if you can’t log in, then just above in the article there is a link to instructions for solving the problem) , and open the section "Setup/Wireless setup".

At the bottom of the window in the column Network Key enter your password (see screenshot below), by the way, you can also set it there security certificate and encryption type(what this is - see above in the article). After entering the settings, save them - button Save Settings.

DIR-300 - setting a password // Setup/Wireless setup

By the way, there is similar firmware in Russian translation, it is configured in the same way.

For router models DIR-300 NRU and DIR-320 NRU(firmware version 1.2) the settings page looks a little different: nice White background, on the left side all the main settings sections are presented. Opening "Wi-Fi/Security Settings" , and install:

1. network authentication: WPA-PSK (for example);
2. PSK encryption key: this is your password;
3. WPA encryption: TKIP+AES.

U D-Link routers DIR-620/DIR-320 NRU in firmware versions 1.3 and 1.4 the interface is slightly different: when you go to main screen, you see Gray background and tiles (as in Windows 8) that display the main settings sections.

To change the password, you need to open the “Wi-Fi/Security Settings” section (number 1 on the screen below), and then enter:

1. network authentication: WPA2-PSK (for example);
2. Encryption key - enter the password;
3. WPA encryption - AES (see screenshot below).

Router from Rostelecom (Sagemcom)

In general, with routers from Rostelecom, as a rule, big problems does not occur - everything works as expected. And when you connect to the Internet, they will give you a password and set everything up. The firmware in routers is completely in Russian, so questions about its configuration usually do not arise.

Address to enter settings: http://192.168.1.1/

Default password and login: admin

Browser: almost any: Opera, Firefox, IE, Chrome, etc.

To set a password, open the section "WLAN Setup/Security" . Further in the subsection "Manual setting access points" select:

1. Authentication - WPA2-PSK;
2. WPA/WAPI password - enter your password;
3. Encryption WPA/WAPI - AES;
4. then click the button "Apply/Save" (screenshot below).

Actually, that's the whole setup...

Tp-Link

One of the most large manufacturers routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and cope quite well with Russian networks(they work with almost all Internet providers).

IP address to enter settings: 192.168.1.1 (in rare cases 192.168.0.1 , depending on the firmware version);

Username: admin;

Password: admin (type without periods, commas, etc.).

Most often you have to deal with the so-called “green” firmware. Found in routers: TP-LINK TL-WR740xx, TL-WR741xx, TL-WR841xx, TL-WR1043ND(45ND), etc. About 50/50 firmware is in English/Russian.

The screenshot below shows English version: to change the password, you need to open the section "Wireless/Wireless Security" , then select WPA/WPA2 -Personal and put:

• Version - Automatic (Recommended);
• Encryption - Automatic (Recommended);
• enter the password in the line PSK Password .

TP-Link (green firmware)

Almost identical actions will need to be done in the Russian version of the “green” firmware: open the section "Protection wireless mode" , then set PSK password(see number 3 on the screen below).

TP-Link "green" firmware (Russian version)

You can also quite often find a “blue” version of the firmware in TP-Link routers(for example, TP-LINK WR340G, TP-LINK WR340GB and other similar models).

Their setup is almost identical:

1. first open the section "Wireless Settings" ;
2. in the column Security Type install WPA-PSk/WPA2-PSK;
3. Security Option- set Automatic;
4. Encryption- install Automatic;
5. PSK Passphrase- this is the password (slightly different spelling than in other firmware versions). It must then be specified when wireless connection to the router.

TP-Link "blue" firmware

After making the settings, save them (button Save on the screen above, see number 3).

TRENDnet

The access parameters are relevant provided that the router has factory settings and its IP has not changed.

IP address to enter settings: http://192.168.10.1

User Name (login): admin

Password (password for access): admin

In general, TRENDnet routers most often have 2 firmware versions: blue and gray (in both Russian and English).

To configure security and set a password in the blue firmware, for example, of the TRENDnet TEW-432BRP router, you must do the following:

1. open section Wireless/Security ;
2. in field Authentication Type select WPA;
3. in field PSK/EAP select PSK;
4. in field Cipher Type select Auto;
5. in field Passphrase and Confirmed Passphrase enter your password and press Apply(screen below).

In the “gray” version of the firmware (for example, as in the TRENDnet TEW-651BR router), actions are performed in the same way, even menu items are located in the same places.

Asus

IP address (web interface): 192.168.1.1

In the authorization lines, type login: "admin", password: "admin" (enter without quotes!). Browser preferably IE (although modern versions web interface works well with all popular versions Firefox browsers, Chrome, Opera, etc.).

Most often, ASUS routers have two firmwares: “blue” and “black” (usually localized in Russian).

To change your password in ASUS routers RT-N10E, RT-N10LX, RT-N12E, RT-N12LX, etc. (this is with blue firmware), you need to open the section « Additional settings/Wireless Network/General tab" .

In the column "WPA pre-shared key" enter your password and save the settings.

ASUS // "blue" firmware

In ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U, RT-N18U routers, the firmware (in terms of password settings) differs only in color. In it you also need to open the section "Wireless network" , tab "Are common". Then change the column "WPA Preshared Key" and save the settings.

ASUS // "black" firmware version

Zyxel

• IP address of the router on the network (web interface): 192.168.1.1
• Login: admin
• Password(default): admin

To change the password on ZyXEL Keenetic of the first series, you need to go to the web interface, open the section "Wi-Fi network", tab "Safety" . Next set the following parameters:

• Authentication- WPA-PSK/WPA2-PSK;
• Type of protection- TKIP/AES;
• Network key format- ASCII;
• Network key (ASCII)- set your password, which you will then need to specify when connecting wirelessly to the router.

In newer routers (for example, Zyxel Keenetic II: Start, Giga, Omni, Viva, Extra) a slightly different firmware is installed. To change the password in them, you need to select the section in the menu "Wi-Fi" and then select the tab (top) - "Access point" .

NetGear

• IP address to enter the router settings: 192.168.1.1
• Login: admin
• Password(default): password
• You can use almost any browser: for example, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.

To change your password in NETGEAR routers(using model WNR2200 as an example): open the "Wi-Fi Settings" section, then set:

• Security options: select item WPA-PSK (TKIP) + WPA2-PSK (AES) ;
• Passphrase: enter your password (you will need to enter it later when connecting wirelessly to the router).

Basically, in this short article I tried to consider all the most popular models routers. If you have a different model from those given, the operating technique will not change: first you need to find the IP address to enter the router settings (can be found in the documents for the device, or on the manufacturer’s website to determine the characteristics of the PC).

Then, having entered the router settings, open the Wi-Fi security section (or Wi-Fi settings) - then set the desired password and save the settings. Difficulties most often occur when entering the router settings: either the password does not match, or the IP address is incorrect, or something else...

This is where I end this article, hello amigo!

Today, every second person actively uses the Internet. Moreover, we constantly strive to ensure that there are as few wires in an apartment or office as possible. For this purpose, wireless Internet was created. But what if your neighbors abuse and take away part of your traffic? That's right, we need protection. Therefore, in this article we will look at how to set a password on WiFi. This is quite simple to do, but the abundance of routers and the difference in interfaces can confuse a beginner, which is why help is needed.

general information

It is worth immediately drawing your attention to the fact that, most likely, if you were connected to the Internet by professionals, you were probably asked to set a password. Or rather, to do it for you. But if for some reason you refused this, you will later regret it more than once - after all, installing it is not as easy as it might seem at first glance. Although, if you figure it out, everything will take no more than 5 minutes. Much also depends on your router, or rather its manufacturer. So, for D-Link this is one instruction, for ZTE it is a little different. But essentially the principle remains the same. Let's try to figure out together how to set a WiFi password. To do this, we will need a working router or modem, some free time and patience.

How to set a WiFi password: first steps

First you need to turn on your router and wait until a connection to the network appears. Next, you must enter the following in the address bar of your browser: 192.168.1.1. After this, the admin panel of your modem or router should appear in front of you. But before you proceed directly to setting up and setting a password, you need to enter your registration data. In the login field you must write admin, and the password item is filled in in the same way. In some cases, depending on the router model, these fields can be left blank. For all others, they must be filled out. After all the above steps have been completed, you will see a large window with many various settings. This is where we will have to work in the near future. But don't be alarmed, not everything is as bad as it might seem. The main part of the settings does not interest us.

Which certificate should I choose?

Many users have this quite natural question. Safety certificate is enough important point, so be careful about this. As for the choice, by default you are offered the following options: WPE, WPA-PSK and WPA2-PSK. It is under no circumstances recommended to use WPE due to its unreliability. In all cases, it is recommended to install a WPA2-PSK certificate, since it is considered the most advanced today. But it happens that the connected device does not support this option, so it is recommended to use WPA-PSK. The best solution in this situation would be a certificate WPA security/WPA2-mixed, which allows you to provide reliable protection your WiFi connection.

How do you actually set a password?

From a technical point of view, everything is quite simple here. First of all, you need to go to the settings (admin panel) of the router, we have already talked about this. After that, you need to find a tab called WiFi or Wireless. And since the actions are the same for almost all routers and modems, you need to go to the “security” tab, where you set the password. There are several fields here; you will be asked to select a security certificate, as has already been said, as well as a password. It is advisable to set a combination of letters and numbers. In the “Encryption key” line, enter your password. After this, do not forget to save the result. You will be able to observe that no one will just be able to connect to you, and this is exactly what we wanted. By the way, you will need to select the encryption type. If the security certificate is WPA, then choose TKIP; if we are talking about WPA2, then it is preferable to choose AES.

How to choose a password?

If you are determined to learn how to set up a Wi-Fi router, then you must understand that protection from unauthorized access is almost the most important thing. Currently, a password can consist of letters, numbers, and symbols. It is advisable not to involve the latter. This is due to the fact that, for example, it will be difficult to enter a password using symbols from your phone, and to remember it too. It is best to use a proven combination of 8 letters and numbers in a mixed order. As practice shows, no brute can crack such a password. And if something does work out, it will take almost whole year. Agree, no one needs this. Remember that it is better to enter as a password not words, but a set random letters and numbers, for example albh1367jh. Well, now let's see how to create a password that is impregnable to hackers yourself. It's quite easy to do, and it won't take much time.

Online generator, or How to create good protection

Since setting a password for WiFi is quite simple, and we have already dealt with this issue, I would like to say a few words about how to choose a really excellent and complex password. To do this, we need to go to the Internet and find online generators there. All you have to do is specify the length and whether or not Arabic numbers are allowed, as well as capital letters. In a couple of seconds you will have the finished result. You just need to write it down and save it in the router settings. Of course, this is not all, because you can come up with a password yourself. For example, write out a few words from a book, rewrite them, remove spaces and some letters between them, and then translate them into English language. Save the result and be happy. In any case, it’s not difficult to come up with a sensible password, you can even experiment, because even a password of 4-6 numbers and letters is very, very difficult to crack.

A few important points

As mentioned above, there is simply great amount routers from different manufacturers. The interface of each of them is unique. However, you need to follow roughly the same steps to set up WiFi and set a password. If this is an English-language interface, then the password is set in the WPA Pre-shared Key line. If the menu is in Russian, then first you need to go to “Advanced settings”, and then “Wireless network”. There are several tabs, you need to select “General” and in the “WPA Pre-Shared Key” item specify the password for the wireless Internet. As you can see, everything is quite simple. If you follow the instructions, the process will only take a few minutes.

Conclusion

So we talked about how to set a password on WiFi. Despite the wide variety of routers, the process is similar for almost all. Once you enter the security key and save the changes, no one will be able to just connect and use your Internet. If any difficulties arise, you should seek advice from your provider. But, as practice shows, in most cases everything goes fine. Remember, set a password of at least 6 letters and numbers, preferably excluding symbols. Well, that’s all on this topic, you know which security certificate is preferable and how, based on this, you can set the encryption type. All these actions together will allow you to protect yourself even from professional hackers, although in most cases they do not do this, but anything can happen. You also need to remember that if you reset your router, you will need to set the password again.

In this article we will discuss a very important component of any computer networks– safety. All networks (except for the simplest ones, consisting of two computers) are controlled by routers, which are complex network equipment that can be configured, programmed, and access restrictions set, as on certain computers local network, and to certain sites.

And, of course, although these features were designed for good, an attacker can configure the router for selfish purposes. And to prevent this, we will learn how to set a password on the router, which will simply block access to the settings for uninvited guests.

The second part of the article will talk about other network security, namely setting a password for connecting to a wireless Wi-Fi network. This password will not allow you to connect to our wireless router and use someone else’s Internet for free.

Entering the router settings menu

To set a password to enter the settings menu, you must first log in and change the password in the settings. If the router is new, then all necessary information to enter is located either under the bottom of the router or in the quick setup instructions.

Label under the bottom of the router

We need the following data:

1. Router address. This network address, looks like an IP address, or in the form of a domain name. They are absolutely equivalent, you can enter any;
2. Username (Username, Login);
3. User password (Password).

The router address is necessary because the configuration is done through the web interface built into the router. That is, the device is connected to desktop computer wired or wireless Wi-Fi connection, launch any web browser, and write the router address in its address bar. We perform similar actions when going to a website.

Authorization when entering the settings menu

So, we connected to the computer, entered the router address, and pressed the “Enter” key. The router will immediately begin to require authorization.

The manufacturer sets the same username and password for all routers. Traditionally, the name is admin, the password is either admin or 1234. Enter them in the appropriate fields and enter the settings.

If an error is displayed and the login/password is not accepted, then it is likely that they have already been changed earlier. You need to reset your device to factory defaults by pressing and holding the reset button for at least 10 seconds.

Router reset button

Usually the button is called “Reset”.

Attention! When resetting, not only the username/password will be canceled, but all other settings! The router will turn into a new device, fresh off the manufacturer's assembly line.

Go to the settings again, enter the factory name/password again, and find yourself in the router settings.

Router settings menu

Although the menu for each manufacturer is slightly different in appearance, the structure is the same for all - select the settings item, and then configure this section.

We are interested in the password to enter the settings menu; this section is usually located in “Administration”, “ System settings" and so on. Let's look at the example of a TP-Link router.

Setting a new password to enter settings

The first two lines are used to enter the current username/password. Enter “admin” and “admin” there (or what you entered when logging in). Next, in the third line “New User Name” we enter a new user name, in the fourth line “New Password” - a new password, and in the fifth line a new password again, thereby confirming it. Next, click “Save” so that the changes are saved and applied. The router will immediately reboot and prompt you to enter the settings with a new username/password.

That’s it, an attacker will no longer be able to enter the settings using the factory password, which he knows, the router is safe.

Some manufacturers only provide for changing the password, the user name is unchanged, and always “admin”. But you can change your password anytime, anywhere.

Wireless Security

Next, we’ll look at protection from fans of the free Internet. As you know, Wi-Fi is transmitted over the air, and anyone can connect to it, even from the street (if the signal strength is sufficient). We will also set a password for these freeloaders.

Settings Wi-Fi password is also done in the settings menu, so first of all we return to the settings.

Let's take as an example again TP-Link router. Having entered the settings, look for the “Wireless” menu item.

Setting up a Wi-Fi password

In the drop-down list, select the “Wireless Setting” submenu. The first part of the window is intended for the main Wi-Fi settings– network name, region, channel and mode. But we are interested in security - it is in the lower half of the screen.

So, check the box next to “Enable Wireless Security” wireless security). Next, in the “Security Type” list, select the encryption standard. The most difficult to crack is WPA-PSK/WPA2-PSK. Select it from the list.

Next, in the “PSK Password” field, we come up with and enter the same password. There are certain requirements for it - it should not be shorter than eight characters, and consist only of letters of the English alphabet and numbers. For greater reliability, it is better to mix everything, taking into account the case of letters (w and W are different).

Click “Save”.

Connect to a wireless network

That's it, now when you try to connect to our network, the computer will require you to enter a password.

Connecting to a Wi-Fi network

If the user does not know the password, access to the Internet is blocked for free.

You can clearly learn how to set a password on a router using the video lesson: