Fallout 4 how to remove unnecessary objects. Method four, mod

Twitter

After the release of the patch for Fallout 4 Many people have encountered problems installing mods. Below you will find instructions on how to properly install mods.

How to install mods in Fallout 4 (preparation)

Enable mods, then set C:\Users\UserName\AppData\Local\Fallout4\plugins.txt to read-only.
1. Open the My Documents/My Games/Fallout 4 folder
2. Install on the files Fallout4Prefs.ini and Fallout4Custom.ini (formerly Fallout4.ini)
read-only attribute.
3. Open Fallout4Prefs.ini with Notepad and immediately below the block paste the following text:
bEnableFileSelection=1
4. Save the file and close it.
6. Open Fallout4Custom.ini with Notepad and find the following line:
and correct the following values
bInvalidateOlderFiles=1
sResourceDataDirsFinal=

This will allow Fallout 4 use resources in unpacked form (by default, all resources Fallout 4 stored in the ba2 archives.)
7. Save the file and close it. Now you can install modifications.

Installing mods in Fallout 4(process)

Use to install mods or do it manually:
1. Unpack the archive with the modification. Copy the contents of the archive to the “Fallout 4/Data” folder.
2. If there is an esp or esm file, connect them as follows:
In the folder C:\Users\Username\AppData\Local\Fallout4, open the file plugins.txt
Add a new line under Fallout4.esm and paste there “filename.esp” (for esp plugins) or “filename.esm” (for esm plugins) without quotes.

Check the “read only” checkbox in the “plugins.txt” properties and apply the changes.

How to remove mods in Fallout 4?

Just delete all modification files. If this is an esp file, then everything is simple, if this is a set of textures, then look at what exactly was in the mod archive. Download the best mods for Fallout 4 possible in our section. We do not chase quantity and choose only the best and proven fashions.

IN Fallout 4 There are a lot of features that sometimes just get in the way and need to be removed. What to do in such cases? How to remove the limit, restrictions and other unnecessary items in Fallout 4?

Fallout 4: removing weapons

When your pistol gets in your way or your interlocutors begin to look askance at your weapon, you will have to put it away so as not to run into many problems. What to do if the weapon turns out to be superfluous?

In order to remove it, you should click on "R" on the keyboard - this will hide your weapon. And all the problems that bothered you should disappear: you will be able to run faster, and other heroes will not be nervous because of the “trunk” pointed at them.

Fallout 4: removing blur

It's no secret to seasoned players that the graphics are not the best aspect of the Fallout series. But sometimes a completely annoying property appears. Yes, we are talking about blur or Motion Blur, which can make the picture somewhat blurry.

In order for it to disappear, you need to turn off anti-aliasing. But there is a downside - uneven things will become even more reminiscent of a “ladder” around the edges.

Fallout 4: removing the haze

Fallout can hardly be called one hundred percent optimized. So gamers often ask themselves a disturbing question: how can they remove haze from the game in order to relieve the system load?

Unfortunately, this is not an easy task: there is simply no such section in the menu. But there is still a way: to remove the haze, you should download a modification such as Fog remover - Performance Enhancer (we recommend it, since we can’t say anything about the others).

Fallout 4: removing 30 FPS

If you leave all the settings in the game as they are initially, you may be upset because of the limited image frequency, because it is very small - you cannot exceed 30 FPS. So often gamers want to remove these limiting boxes.

Since there is no such parameter in the options, you need to go into the toy’s system files and find a file called Fallout4Prefs.ini. To edit it, use a regular notepad or some kind of text editor.

When you open the document, look for iPresentInterval. A unit will be written next to it, which must be replaced with a zero. Next, save and restart the toy.

Fallout 4: removing soap

We have already written earlier that blurry pictures may be the result of poor anti-aliasing, which needs to be turned off. But there is another way - in the graphics editing menu, you need to click on FXAA - sometimes this checkbox in that place helps.

Fallout 4: removing corpses

You have probably more than once encountered the fact that there were dead bodies lying on the streets of the town that no one took care of. If you don’t like it, and for you it’s not an addition to the overall atmosphere, but just a disgusting excess, you can remove it all. We will also tell you how to highlight the enemy.

The dead in Fallout 4 are not surprising at all. They can lie either singly or in whole heaps. Of course, the survivor sometimes makes the situation worse with his actions, but this is not at all as funny as it seems. Corpses decompose, mutate in the contaminated area, etc. To remove them, you need to use one of the proposed methods.

The first is to collect the dead, drag them somewhere far away and leave them there. To drag a dead body, you need to click on the E button next to it. To leave it, you need to click on E again. BUT this is not very effective, since the corpse can turn into a zombie and return to the village.

The second method is for the console. To do this, you need to click on “~”, then point the mouse at the dead person and enter “Disable” in the ID code, and then click Enter. That's all - you don't see it (yes, we just made the corpse invisible, and this does not eliminate the problems associated with radiation).

But in a third way you can remove them forever. You should use MarkForDelete, and then the pipe will be permanently erased from your game.

In order to always know where your enemy met his death from wounds after a collision with you, you need to know about the illumination of bodies. To do this, they created a modification that will allow them to glow.

Fallout 4: removing the console

Many users sometimes ask strange questions that are not entirely logical. For example, they ask how you can remove the console that interferes with the passage. The answer is simple, because you called it by pressing the tilde. So you can remove the console very easily: you just need to press the tilde (~).

How to remove the limit in Fallout 4

There is a limit in the game for those who are going to live in your village. Yes, you will not be able to exceed it, even if there are many houses, and the resource base will be huge and will allow you to rebuild almost all of humanity anew.

The usual settings are not enough to answer the question “How to remove the limit in Fallout 4”. Of course, if you improve the Survivor, then this limit for recruiting residents of your village will become slightly wider, but not by much. The game does not have options that will allow you to recruit an unlimited number of settlers.

In order to remove the limit for settlers, it is best to look for appropriate mods on the Internet, but we cannot vouch for their effect.

Removing the construction area

Another undesirable limitation in the game is the construction zone, which sometimes gets in the way. Often such areas are filled with a huge number of dilapidated houses, old withered trees, and heaps of garbage.

Unfortunately, there are very few methods, and the process itself will be long: old buildings, trees, garbage, etc. will have to be removed.

The easiest way is to install a mod that allows you to get rid of unnecessary things, but again, this is risky, since the game may not open later.

Removing the rubble from the castle

When you get to the castle, you will need to deal with all the rubble that will prevent you from going further. And the castle plays a very significant role in the passage of Fallout 4. So when you find yourself in the castle locations, in order to deal with the huge rubble, you should approach them, just hover the mouse over the objects and click R.

Fallout 4: removing freezes

Sometimes in the process of passing, you are faced with the fact that your favorite Fallout freezes and glitches.

To prevent your Fallout 4 from freezing, you have to reduce many parameters, because freezing occurs as a result of system overload or insufficient “pumping” of your hardware.

Go to the game menu, first of all, reduce the picture resolution, turn off all effects that complicate the work of a personal computer. This can help.

You can also turn to OS optimization. Disable everything that is running in parallel with Fallout 4, because sometimes programs overload the computer system and slow down the work. And in general, if your computer is not very strong, it is better not to activate many programs at the same time in order to avoid further errors in their functioning.

Buying a stronger PC will also help if you don’t mind the high price of modern technology.

Fallout 4: removing the splash screen

The game Fallout 4 has a very long video that starts it off. Yes, this is useful if you don’t know the plot, don’t know the history, so to get into it, you can watch the entire video. But if you see it in the second, third, etc. times, you might just get tired of waiting for it to end. So the question naturally arises: how to get rid of the lingering screen saver?

To ensure that the screensaver no longer appears, you need to perform simple steps. If you use Steam at startup, you need to go to the steamapps folder, go to common and select Fallout 4. There, in the data folder, look for the Video section. It contains a file called GameIntro_V3_B.bk2, which should either be deleted or its name changed - the splash screen will no longer bother you.

But if you don’t use Steam, then there is an alternative option for you. You need to log into the users section on the drive on which you installed Fallout 4. Then select “username” and go to documents. There, in the My Games folder, look for Fallout 4, which contains the Fallout4.ini file. Click on it to open it. To do this, use a text editor. Inside this file, look for the line where you add the phrase SIntroSequence=1

Also, in the folder with Fallout4.ini, look for Fallout4Prefs.ini, in which you need to do the same steps. Open in a text editor and add SIntroSequence=1.

We hope our tips will help you.

With the advent of construction in Fallout 4, a lot of controversy has arisen about the need for this activity. But, in my opinion, it is very addictive. There is only one problem - the building limit. And today you will learn several ways how to remove the building limit in Fallout 4.

I’ll start with the most “legal” ones, although not the most effective ones.

Firstly, the building limit is filled not only by the buildings themselves, but also by the garbage that lies on the territory. Old tires, trees, etc., in short, all items that are in the construction zone. So we walk through the location like a vacuum cleaner and sort out what is unnecessary. At the same time, resources for construction will increase. But you won’t be able to do this forever for obvious reasons, so here’s the next method.

The second way to increase the limit in Fallout 4

As you already understood from the first method, items affect the limit. But this limit is also affected by the weapons that are on the location. We do this: we fill the limit all the way, and then begin to throw the weapon onto the ground. The bigger, the better. After this, we approach the mountain of weapons and begin to save the guns on the workbench. Don't worry, they won't disappear and nothing will happen to them. You will quickly notice how the limit bar decreases.

Method three, table

The Nexus Mods website has a helpful sign for Cheat Engine called Unlimited Settlement Objects- link .

Installing Cheat Engine
Open the downloaded table
We are looking for a process with the game.
At the bottom, place a cross opposite Infinite "Size"
Change the line value to “0”

Now the building limit will always be at zero.

Method four, mod

Let's go to the same Nexus and download this.
Place it in the game folder (NOT IN THE DATA FOLDER)
We start the game and go to the desired settlement.
Find a workbench, open the console, select it with the mouse, and then enter “bat settlement” into the console (quotes are not needed)

Another way

We approach the workshop, as in the previous method, open the console, and then enter this one by one: setav 349 3675555555.00 and setav 34B 3675555555.00 after this the building limit should be canceled.

Finally, I want to say that all these manipulations with a purpose remove the building limit in Fallout 4 You do this at your own risk, abuse of this can negatively affect your saves or even lead to crashes from the game. So I strongly advise you to save more often and keep two saves at once, one overwritten, and the second a backup, so that you can return to the moment when everything still works well.

Tired of corpses lying around in settlements? In the description you will find how to get rid of them once and for all. You will also learn about a very useful mod that highlights enemies and their bodies.

How to remove corpses in Fallout 4?

Corpses are commonplace in the game. They can be found anywhere, sometimes even in large quantities. The hero also does not stand still and constantly increases their population in the Wasteland. Many players have killed so many enemies that they have to walk through continuous fields of the dead. Lying corpses on the territory of settlements are especially annoying. These could be disgusting mutants, skeletons, or just heaps of stinking mucus, and people live nearby. To correct this disgrace, let’s figure out in Fallout 4 how to remove corpses so that they don’t litter the area.

Removing corpses, method 1

The easiest way is to drag them away and throw them away. How to drag corpses in Fallout 4? To do this, you need to approach the body, press the E key and drag it away; by pressing the key again, the corpse is thrown out. This method is simple, but does not always work as expected. Upon returning to the location, they often discover that the body has miraculously crawled back to its original place; radiation is most likely to blame.

Removing corpses, method 2

The next method concerns corpses that cannot be removed and those bodies that do not move at all. To do this you will have to use the console. Press the “~” key to open the console, then poke the mouse into the body so that its ID code is displayed and write the command “Disable”, press “Enter”. After exiting the console, we will see that the body is missing. The only trouble is that it simply became invisible, and did not disappear forever. You can again make it visible with the “Enable” command. In this version, there seem to be no bodies, but in fact, walking along the invisible skeleton, we will hear the cracking of its bones. With this method, it is also possible to return the body to its place, and when you return to the village, you will stumble upon it again.

Removing corpses, method 3

This method will allow you to permanently clear the area of corpses in Fallout 4, and you can also remove other unnecessary items from the game. To do this, use the “MarkForDelete” command. In this case, you will erase the object from your life forever. Warning: Be careful and attentive when selecting an object, as this code can even remove textures from the game.

Body illumination

Any of you have encountered a situation where, in the heat of battle, you did not notice where the corpses of your enemies were falling. Then a lot of time is spent searching for these same bodies, because your opponents are your rightful prey. It is also a source of the latest weapons, better armor, ammunition and other useful and necessary loot. To make it easier to find fallen enemies, install the Illumination of Enemy Corpses mod in Fallout 4. Its advantage is that as long as the enemy, alive or dead, is of interest to you, it will be highlighted. In Fallout 4, corpses glow until you search them and take everything. In the mod settings, you can set the functions so that only corpses or living enemies will glow, or you can make both corpses and living enemies glow.

To cheat in Bethesda games and engage in real cheating, it is best to use a console and a set of commands that are not known to everyone and can open up a lot of new opportunities for you in Fallout 4. To turn on the console you need to press the tilde on the keyboard (“~”) and recruit the team that interests you.

You can most often find this button on your computer keyboard above Tab. When the console is activated, enter the command from the list that we provide below.

Not all commands from the game Fallout 4 are known yet, and very few IDs of items and things are available, but we will try to supplement this list as new details appear.

Here is a list of commands that will probably work in the Fallout 4 console:

tgm - God Mode
tcl - Flight mode and passing through objects.
tai - Disables AI - all characters stand still.
tcai - Disables combat AI. Peace everywhere!
killall - Kills all enemies and neutral NPCs in the area.
kill - Kill a creature with a given ID.
resurrect - Revives a creature with a given ID.
setgs fJumpHeightMin [digit] - Changes your jump. The higher the number entered, the higher you will fly. Don't forget to turn on God mode!
setav speedmult [digit] - increases running speed by a number of times.
tfc - turns on a free camera. Great for screenshots.
tm - Removes the entire interface. Also for screenshots... the problem is that the console also disappears. Press the tilde again and enter the command by touch.
setscale [1 to 10] - increases your size or the size of the target.
sexchange - Changes the character's gender.
player/additem 0000000f [digit] - adds the entered number of caps.
player/additem 0000000a [digit] - adds the entered number of master keys.
additem [digit] - adds the entered quantity of the item specified in the ID.
coc qasmoke - Moves to a room with boxes that include every item in the game. Allows you to find out the IDs of things. Just open the console and click on the item with the mouse.
set timescale to [digit] - Speeds up/slows down time. For example, 16.1 is real time, 1 stops time, 10,000 rewinds the day in seconds.
tdetect - AI does not see you.
modav [skill] [number] - increases the selected skill by a given number
setlevel [digit] - increases the level by a given number
caqs - completes all main quests
Help [Object, character name] 0 = Search for all objects with the same name
Placeatme [Code of an object found in the help or by clicking] = Click on the position where your item should appear
placeatme [X] = Same as above, but spawns an object directly below you (works better, no bugs)
TWF = Enable mesh, “Wire frame” mode
Getpos x,y,z = Get data about the position of an object, works only in one coordinate axis (example getpos z)
Setpos x,y,z # = Set the position value of an object in one coordinate axis (example setpos z 250)
Getangle x,y,z = Get the angle of an object (example getangle z)
Setangle x,y,z # = Set the angle value (example setangle z 245)
Rotate x,y,z # = Rotates an object by adding a value to an existing one (example rotate z 245)
Setscale # = Set object size
setav carryweight [digit] - changes in carry weight
to open a door opened by the remote control, enter the command “activate”, not “unlock”