Zfs file system. ZFS is the best file system (so far)


Articles and Lifehacks

A regular memory card that is used in your mobile device can become a storage device, you just need to know how to enable USB storage on Android. The indicated task sounds somewhat frightening to an ignorant person. But in reality there is absolutely nothing to be afraid of. To complete it you will need:

  • Mobile device running on the Android operating system;
  • Computer with USB port;
  • USB cable that comes with the gadget.
Now you can proceed to the process of turning on the USB storage.

Connection procedure

The actions you have to take are absolutely simple, and even the most novice user can handle them. So, you will need:
  1. Connect a working Android device to the computer using a USB cable;
  2. When the PC “sees” the gadget, the message “Enable USB drive” will appear on its display; you will need to click on this inscription;
  3. Some models automatically turn on the USB drive when the device is connected to the computer. In this case, you don't need to press anything else;
  4. After these steps, the line “Open folder to view files” will appear on the PC monitor, and the new equipment connected via a USB cable will be recognized as a disk drive.
And then you can work with the SD card and the files that are on it, like with a regular flash drive.

What to do if you can't enable storage


This problem can be solved as follows:
  1. Go to the main menu of your Android device;
  2. Find the “Settings” section there and select “Network”;
  3. Here, go to “USB Settings”;
  4. Click on the line “Connect USB storage”;
  5. Now connect your mobile device to your computer and make sure that the problem is resolved.
After you are finished working with the SD card and the files stored on it, you need to click on the “Turn off USB storage” message, which will be displayed on the display of your smartphone or tablet. The memory card will automatically disconnect from the computer.

USB OTG File Manager for Nexus allows you to open and copy files from any USB storage device with the FAT32 or NTFS file system using the USB OTG port. You can copy files to any storage device and manage them: edit file names, add directories and delete files.

You can also manage your files in the device's internal memory. The application was developed for Nexus devices that have the "OnTheGo" port. But it is also possible to work on any device with an OTG USB port and Android 4.0+

Instructions

  • 1. install the USB OTG File Manager program.
  • 2. connect the flash drive to your device via an OTG cable.
  • 3. Allow the application to become the default for opening flash drives.
  • 4. Click CONNECT in the program and wait for the connection.
  • 5. using the program...
  • 6. Before exiting the program, press the special shutdown button (see screenshot).

Add. information

  • 1. When connecting and launching for the first time, allow the application to become the default for opening flash drives.
  • 2. With FAT32 file system, read and write is available. With the NTFS file system, read-only is available.
  • 3. Supports opening files directly from a USB device.
  • 4. The application may offer to install additionally Simple Music Player for playing music. Whether to bet or not is up to you. I didn't put it.
  • 5. The application has an Advanced Mode for advanced users. If you are not confident in your actions, then use a normal gun (Normal Mode).
  • 6. The application does not transmit or receive any data from the Internet, which is good.

Download the application for working with a flash drive - USB OTG File Manager for Nexus on Android you can follow the link below.

Developer: KyuuDrod
Platform: Android 4.0 and higher
Interface language: Russian (RUS)
Status: Full
Root: Not needed

Now we will look at the reasons and what to do in a situation where your Android phone does not see a flash drive or hard drive via a USB OTG cable.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

Attention! In the comment there is another piece of advice from a reader with experience in solving this problem. Don't forget to check it out.

Reasons why an Android phone cannot be seen via an OTG adapter

In addition to the lack of support for USB On-The-Go technology (read below), there are other reasons why your Android phone or tablet does not see the flash drive through the cord, even if the indicator is on:

  • The volume of the connected storage device is too large.
  • If there is connection sound, but the equipment cannot be detected (or it is just charging), make sure that its file system is in the appropriate Fat32 format. NTFS and ExFat are not readable on Android. Read
  • Flash drive malfunction. Try connecting it to your computer to make sure the drive works.
  • Damage to the connector on the phone/tablet. Even if, this does not mean that the connector is completely intact - the contacts responsible for data transmission may be damaged.
  • Damage to the OTG cable or adapter. To make sure it is working properly, connect another flash drive to another phone that is known to be suitable for this task.
  • Inappropriate OS version. Read your manufacturer's specifications.

In some cases, it will not be possible to connect the device without. This occurs if a specific phone model cannot automatically mount an external drive. To eliminate the shortcoming, you need third-party software - for example, an application that can work with flash drives, modems, cameras and other devices.

Increase

When connecting equipment via an OTG cable, the program will automatically detect and mount it. You can find the contents of the drive in the /sdcard/usbStorage/sda1 folder. To safely remove the drive, you must select the “Unmount” option in StickMount.

You can connect a flash drive and even an external hard drive to an Android phone via an OTG adapter, but this is not always possible to do this the first time. The reasons may be different, from an incorrect file system to partial damage to the connector on the smartphone.

Most often, you can fix the problem yourself, but in severe cases you have to contact a service center.

Checking your phone's OTG support

If you are trying to understand why Android does not see a USB flash drive, then the first thing you need to do is make sure that your smartphone can work with USB Flash at all.

To do this, it must support USB On-The-Go technology. It means that microUSB supplies power to the external drive via an OTG cable, so that it becomes visible in Android, just like in Windows 7/10/XP.

To make sure that the hardware characteristics allow you to connect a modem, flash drive, keyboard or any other USB device to your phone, install the application on Android.

If the program shows that the phone is ready to work with external devices through the hub, then you can connect the OTG cable and establish a connection with the flash drive through it.

Increase

How to properly connect a flash drive to Android via USB

What should I do to avoid unnecessary complications and errors when connecting a flash drive to my phone? Follow the instructions strictly:

If the device is not detected and does not mount, use the StickMount application. Remember to unmount before removing the media so as not to damage its file system.


2024 gtavrl.ru.