What does wipe data mean? How to do wipe on an Android device

When using a smartphone based on operating system Android users are seeing numerous performance issues. Applications do not launch immediately, and some may even crash. Sometimes serious lags and other problems are noticeable. Immediately there is a need for a complete reset to factory settings. But is it worth it? After all, you will lose all the data on your phone.

Many users on the forums recommend performing the Wipe Cache Partition procedure to improve the performance of the smartphone, remove all extra files and at the same time retain basic information in memory. Is it possible? Maybe! Although not many users resort to this method, since they do not know all its intricacies. If you are reading this material, it means that you were also advised to clear your smartphone through the cache. Well, let's tell you about all its subtleties.

Wipe Cache Partition is a method for clearing temporary data from your smartphone. This is a kind of separate option that allows you to delete the cache accumulated over the entire period of using the phone. Its main difference from a full reset is the preservation personal information. That is, all photos, music, messages, videos and applications will be saved on your device. Only temporary files that accumulate en masse in each program are deleted.

Thanks to this option, you can significantly increase the performance of your smartphone, however this method usually used if you have already tried separate tools to clean up temporary files (garbage) and free random access memory from unnecessary processes.

How to perform Wipe Cache Partition?

If you still decide to clear the entire cache on your smartphone using this option, you will need to go to Recovery section, through which, by the way, they make firmware, reset the device to factory settings, create backups. The Wipe Cache Partition is also located here.

Login on different devices Recovery mode can be carried out different ways, however, the principle is approximately the same: press several keys at the same time. Typically these are the Power button, Home button and Volume key (up or down).

So, you need to do the following:

1. Turn off your smartphone;
2. Simultaneously hold down the Volume Up (or Down) keys, the Home button and the Power button. If you can’t call it this way, look up the combinations for your smartphone on the Internet. We have described here the most common option, which is used on most devices;
3. As soon as the Recovery logo appears, release the keys and wait until the menu loads. It will have many different items;
4. For control, use the volume keys, which allow you to scroll the list up and down. Select Wipe Cache Partition and confirm the operation by pressing the Power key;
5. The smartphone will automatically clear the cache and then return to the same menu. Here select Reboot System Now and wait for the device to turn on.

At this point, clearing temporary files from your device is complete. Before the procedure, you can even go into the settings and see how much memory you have in total, and compare this data after cleaning. But at the same time, we strongly recommend that you read all the items that you see in front of you in the Recovery menu, since it is also done there full reset to factory settings. If you accidentally click on this procedure, all data from your smartphone will be permanently erased!

Clearing cache on Android in other ways

You can use other methods to clear the cache, and control will take place through the settings of your smartphone. Here everything depends on the amount of data that needs to be cleared, as well as on the state of the system - how correctly it works. We will consider both options.

Clearing the cache of all applications

Clearing the cache of all applications for Android 8.0

If the smartphone is on Android based 8.0, then clearing all temporary files is done in a slightly different way, namely:

Clear the cache of a specific application

In Android, you can delete temporary files for each application, for example, if the saved data on VKontakte or another messenger is important to you. In this case, you choose in which program the cache will be deleted. To perform this operation, follow these steps:

Please note that the more often you use programs or play games, the larger and faster the cache grows in size.

A friend advises doing a factory reset using Wipe data / factory reset, but I can’t figure out what it is and how to do it. Please tell me.

Answers (2)

1. This comment is edited.
   

   Wipe data factory reset is a function that is used to remove applications and user data from the device memory. It is used when unstable work smartphone, before installation new firmware or sale when it needs to be cleaned. Please note that the system folder and others system partitions except, data and cache remain untouched after wipe data factory reset.

   Translated into Russian, Wipe data factory reset is roughly equivalent to “data wipe and factory reset,” but most often they just say reset to factory settings.

   Now I’ll tell you how to do a wipe data factory reset. There are two options for this - through the device settings or recovery. The first method is easier, so I'll start with it:

   • find the application with the gear icon and go into it - these are general settings;

   

   • Scroll down, open the “backup and recovery” section;
   • go to the “reset to factory settings” item;
   • At the bottom, click the “reset device” button;
   • then tap on “clear all”;
   • a window will appear warning you about permanent deletion information, we give consent.

   The tablet or phone will turn off, a green robot will appear, under which the cleaning process will be shown. Then android device will start loading, but it will take longer than usual - this is normal.

   Through recovery, resetting to factory settings is done as follows:

   • turn off the device completely;
   • press and hold the combination of the power and volume buttons up or down, the combination depends on the smartphone model;
   • wait until the manufacturer's sign appears;
   • release the buttons.
   • if CWM or native is installed, then use the volume control rocker to move to the “wipe data factory reset” section;
   • open it with the “on/off” button;
   • go to the item “yes - wipe data factory reset”;
   • press the power button.

   If after the end of the process you need to turn on the Android phone, then go back through the “go back” item, and then select “reboot system now”.

   In TWRP the process is similar, the only difference is in the interface:

   • go into recovery as described above;
   • tap on the “wipe” item;

   

   • A section will open, at the bottom we move the blue circle to the right (maybe a square).

   
   To boot into the system, click the curved arrow in the lower left corner, then the “reboot” and “system” buttons.

3. This comment is edited.
   

   Before flashing the device, be sure to perform three actions - Wipe dalvik cache, wipe data factory reset, wipe cache partition. Translation into Russian “wipe cache partition” is cleaning the cache partition.

   This memory area stores temporary files that remain after running applications or system updates, so this procedure can be done when the smartphone is slow or freezes.

   When installing custom firmware, for example, CyanogenMod or MIUI, updating to latest version through recovery, to avoid conflicts between the remaining and new files, you must run Wipe cache partition. Wipe cache partition what it is is now clear, I’ll write later how to do it.

   This procedure with the phone is carried out only through recovery. On CWM for this you need:

   • open the general recovery menu by holding down the button combination;
   • Use the volume control keys to go to the “wipe cache partition” section and press the power button;
   • in the same way, move to the “yes - wipe cache” item and select it.

   If TWRP is installed, then do this:

   

Users of smartphones based on the Android operating system who don’t mind delving into the settings of their gadget have repeatedly asked themselves the question: Wipe data/factory reset what it is?

This is a function that allows you to reset the settings to factory settings, simultaneously clearing all information. In this case, the data is deleted both from the memory card and the global internal memory of the phone. After using this function, only the system folder and other system partitions responsible for correct work smartphone. The remaining information and applications are completely erased without the possibility of returning them in any way.

Contents:

Why is this function needed?

There can be many reasons to use this feature. Users often encounter memory limitation problems. An SD card always has its limit, and the phone's built-in memory can usually hold even less information. However, despite all the warnings, we fill up the phone, overfilling it with music, videos and photos, which ultimately leads to unpleasant consequences:

• loading the smartphone is very slow;
• the gadget freezes even with the simplest manipulations;
• applications stop working correctly.

In this case, it becomes difficult, if not completely impossible, to use, so many, when faced with this problem for the first time, rush to service center, wanting to fix everything as quickly as possible.

Important! Equipment repair and inspection services are not free and you will have to spend money on something that you can easily do at home yourself.

Viruses can also be one of the reasons. By downloading applications, games and information from unverified sites, the user risks his gadget. Sometimes a virus introduced into the system can be successfully dealt with by the built-in antivirus program, but their reliability is not always at top level.

An effective way to get rid of the problem is to use. Together with personal files, the deletion of which, unfortunately, cannot be avoided, the virus will also be destroyed.

You can use it for a number of other reasons:

• If you have recently updated the firmware of your smartphone, removing the built-in, original system, replacing it with a custom one, or simply upgrading to a higher version.
• When selling your phone to another person, without wanting them to have access to your personal information.
• In case of permanent failures in Android work , for which you cannot find an explanation.

Factory reset, of course, you can do it without any urgent reason, if you wish, simply saying goodbye to old and boring applications that you don’t have time to delve into.

Peculiarities

From English wipe translates as cleaning, wiping, and if you see it in the gadget settings, always remember that this is formatting and hardly anything else. There are two types:

• Full wipe- choosing an action will lead to complete cleaning and formatting of both built-in and removable memory.
• Partial wipe- helps to remove separate sections and folders, performing the cleaning operation so that this does not lead to malfunctions and failures in the future.

On Android there are three ways to use it:

• through the options menu;
• using Recovery;
• thanks to special button responsible for the reset, if available.

Following the first method, turn on the smartphone and find the section “ Settings» (most often a gear-shaped icon) and click on it.

Next, almost at the very bottom we see the item “ Recovery" and go into it. Then you should find “ Reset to factory settings" and use it. To continue, click " clear all».

Please note: The system will definitely issue a warning that your files will be permanently deleted. We just agree and continue.

The manipulations carried out will lead to the fact that your gadget will go out for a while, and when it lights up again, a robot will appear with a scale showing what stage the formatting is currently at. Once it's completed, the device will reboot, but it will do so very slowly, so don't be alarmed that you've broken something or only made the situation worse.

Second method with using recovery takes longer and requires attentiveness from the performer. Follow the instructions and you will succeed:

• Completely turn off your smartphone or tablet.
• We hold down the volume control on its side panel and without releasing it, press the power button.
• Either the company logo or the menu for work should immediately appear, and only after that do we release the buttons.

Move further actions depends entirely on whether this feature is standard. If you see a list of commands on a black screen, then CWM is installed on the gadget. This means you should use the volume up and down keys to scroll through. With their help we reach the section the desired section and using the button to turn the smartphone on and off, select the correct item. Next, we confirm our choice.

Wipe (wipe – wipe, wipe) in Android system called a factory reset. This process is also called “formatting” or “Hard Reset”. Why do you need to reboot on Android?

The fact is that after this action the device will be completely cleared of preinstalled programs, and will help get rid of the following problems:

• Possible malfunction as a result getting root rights;
• Incorrect functioning and occurrence of system errors;
• Deterioration in performance as a result of operating system updates;
• Problems due to flashing, i.e., after switching from original to custom firmware;
• Deleting all personal data (hard reset) during pre-sale preparation of the device.

Types of “reset” on Android

Hard reset on Android can be divided into two types:

1. Full (aka hard reboot on Android) – deleting all programs and data on the device itself, or in any of the selected sections.
2. Partial – deletes specific folder(directory).

Ways to perform wipe

Execute Android wipe possible from the following modes:

1. Settings menu: go to the settings menu, then “recovery” and “reset”, check the “clear SD card” checkbox (data stored on the memory card, programs and files inclusive are deleted, information from the phone’s memory will also be deleted).
2. Using the “reset” button located on the device (if provided by the manufacturer): using a paperclip (or similar object), press and hold the reset button for 15-30 seconds (the settings are reset to factory settings).
3. Recovery menu: to get to the recovery menu, turn off the power, hold down the “home” key and the volume rocker to increase, simultaneously with the “power” button. Important: different devices may have other key combinations. We move through any menu by decreasing or increasing the volume, and selecting actions by pressing the “power” (turn on) key. In addition, it is possible to use a PC and ADB programs, universal for all devices. First enable USB debugging.

a) B standard menu recovery Android: select Wipe data/factory reset, then “Wipe cache partition”, reboot the smartphone (Reboot system now);

b) In the menu Recovery CWM(or similar):

• Partial Wipe (in case of a “glitch” of some program), with saving all data or programs: “Wipe cache partition”, then “Advanced”, then “Wipe Dalvick Cache”, finally reboot, or reboot on android
• Full Wipe or hard reset android (removing all programs and their data): select “Wipe data/factory reset”, then “Wipe cache partition”, and reboot the smartphone (Reboot system now). The content is saved.

Wipe through recovery

Now directly about wipe through recovery. In classic recovery option There are two types of reset available for Android:

To delete all data stored in the DATA or CACHE sections and folders containing program data. In this way we permanently remove all applications along with the root directories and personal settings, but we save media files (image, video, music).

Wipe cache – we erase temporary information about the operation of programs and applications. This action is required if a system malfunction occurs.

What if nothing helps? You shouldn’t blame the fact that “your hands don’t grow from there”, you just need to perform “WIPE DATA/FACTORY RESET”. In this case, it is possible to do wipe applied to any section of the system.

And the last, fourth mode from which you can wipe is the Bootloader menu, but in in this case you must use fastboot tools.

Additional information about wipe on Android

Often, on sites that publish information about Android, you can find instructions on how to flash the firmware, as well as how to obtain root rights. These guides instruct you to perform a factory reset this way: wipe data, wipe cache, wipe dalvik cache, format data. However, this is a frankly incorrect recommendation because it does not reveal the full structure recovery menu and talks about ignorance file structure Android systems. The wipe data/factory reset action deletes the data partition containing the dalvik cache directory. This means that some manipulations will be completely unnecessary. The fact is that wipe and format are terms that have the same meaning, for example the system/xbin partition does not contain format files, but the wipe file is there.

Some nuances of performing a wipe on Android

Often users are faced with a dilemma: when to reset the settings, before flashing the device, or after? The answer lies on the surface - of course before flashing, because any firmware usually has a built-in function that automatically reboots the system after the installation has been completed.

If in the firmware in the section " data"there are uploaded files" wipe", let's see how the system will perform its functions after loading, if it's bad, then perform " wipe data».

And a little more information about the subtleties.

Many experts agree that the highlight of the CYanogenMod custom firmware can be called a script - part of the installation from the recovery menu, which initially backs up the system files, and after flashing, restores them. As a result, errors may occur. Therefore, if you decide to use this firmware, then first run format system.

That’s basically all we wanted to tell you, we really hope that our information turned out to be useful.

Those who don’t mind delving into the settings of their gadget have repeatedly asked themselves the question – Wipe data/factory reset, what is it?

This is a function that allows you to reset the settings to factory settings, simultaneously clearing all information.

In this case, the data is deleted both from the memory card and the global internal memory of the phone.

After using this function, only other system sections that are responsible for the proper operation of the smartphone remain untouched.

The remaining information and applications are completely erased without the possibility of returning them in any way.

Contents:

Why is this function needed?

There can be many reasons to use this feature. Users often encounter memory limitation problems.

An SD card always has its limit, and the phone's built-in memory can usually hold even less information.

However, despite all the warnings, we fill up the phone, filling it with music, videos and photos, which ultimately leads to unpleasant consequences:

In this case, it becomes difficult, if not completely impossible, to use, so many, when faced with this problem for the first time, rush to the service center, wanting to fix everything as quickly as possible.

Important! Equipment repair and inspection services are not free and you will have to spend money on something that you can easily do at home yourself.

Viruses can also be one of the reasons. By downloading applications, games and information from unverified sites, the user risks his gadget.

Sometimes the built-in one successfully copes with a virus introduced into the system, but their reliability is not always at the highest level.

An effective way to get rid of the problem is to use a system reset. Along with personal files, the deletion of which, unfortunately, cannot be avoided, the virus will also be destroyed.

You can use it for a number of other reasons:

• If you have recently updated the firmware of your smartphone, removing the built-in, original system, replacing it with a custom one, or simply upgrading to a higher version.
• When selling your phone to another person, without wanting them to have access to your personal information.
• In the case of constants for which you cannot find an explanation.

A reset to factory settings, of course, can be done without an urgent reason, if desired, simply saying goodbye to old and boring applications that you don’t have time to delve into.

Peculiarities

In English, wipe is translated as cleaning, wiping, and if you see it in the gadget settings, always remember that this is formatting and hardly anything else. There are two types:

Full wipe- selecting an action will completely clear and format both built-in and removable memory.

Partial wipe- helps to delete individual sections and folders, performing a cleaning operation so that this does not lead to malfunctions and failures in the future.

On Android there are three ways to use it:

How to do it on Android?

Following the first method, turn on the smartphone and find the “Settings” section in the menu (most often the gear-shaped icon) and click on it.

Next, almost at the very bottom we see the item "Recovery" and go into it. Then you should find "Reset to factory settings" and use it. To continue, click “Clear all”.

Please note: The system will definitely issue a warning that your files will be permanently deleted. We just agree and continue.

The manipulations carried out will lead to the fact that your gadget will go out for a while, and when it lights up again, the robot will appear with a scale showing what stage it is currently at.

Once it's completed, the device will reboot, but it will do so very slowly, so don't be alarmed that you've broken something or only made the situation worse.

The second method is longer and requires attentiveness from the performer. Follow the instructions and you will succeed:

The course of further actions depends entirely on whether this feature is standard. If you see a list of commands on a black screen, then CWM is installed on the gadget.

This means you should use the volume up and down keys to scroll through.

With their help, we reach the section of the desired section and use the button to turn the smartphone on and off to select the correct item. Next, we confirm our choice.

If TWRP is built into the gadget, the manipulations will be slightly different. After entering recovery, a grid of partitions will open, from which we select the one we need.