Endless windows is loading files. Disabling a floppy drive - images
In general, I decided to take care of my stationary and ancient system unit. I assembled the computer myself about 8 years ago: 4 gigs of RAM, 1GB video card, 600W power supply, Dual processor Core intel Pentium D 930 3.00 Ghz. But I’ll tell you, even the famous game Warface flew on this hardware at the highest settings.
About two years ago I installed the Windows 8 operating system, but decided that it was time to clean the entire system and install Windows 7. The computer began to slow down a lot.
- First of all formatted system partition using Live CD.
- At the same time, I recorded an image on my laptop Windows disk 7 per flash drive.
What actions were taken to recover?
- Reset BIOS settings to factory defaults
- Cleaning the system unit from dust
- I disconnected all the strips one by one random access memory
- The 135MM cooler in the power supply died a long time ago, and I replaced it with a fan from the case. True, I had to tinker with it since the cooler on the case is slightly smaller (120MM).
- Checked the disk for bad sector using Victoria HDD ( Bad sectors not found)
- I disconnected the second hard drive and DvdRom, and also turned off the built-in sound and some ports in the BIOS.
The most interesting thing is that other boot disks start without problems, be it Dr.web Live Cd, Hiren'S BootCd, and other bootloaders. Windows 10 worked before formatting, but rebooted several times within 10 minutes of computer operation, apparently due to overheating power supply I solved this issue in my own way.
Working with a hard drive.
Then I decided to carefully check the hard drive. To do this, I booted from Hiren's Bootcd shell into Mini Windows Xp, then launched Partition program Wizard Home Edition. At first I didn’t immediately notice, but I saw that there was no system (hidden) partition, which is automatically created after dividing the disk into several partitions.
Since I have photos on the second partition G:, I deleted the system partition (the very first C:). And then created new section with formatting in ntfs. To create a section, there is a Create button.
And then I had a hidden section, which for some reason did not exist before.
This action is also Didn't help get rid of the black screen. You can basically turn everything off hard disks, and the Installer shell should load anyway.
Complete cleaning of hard drive with MBR
It is likely that this problem appeared after installation in the system unit new video card, and the old one is lying around at the dacha. Since I don’t have it at hand right now, I transferred all the information (125GB) to external HDD from the second partition of the hard drive.
IN command line CMD launched the utility diskpart.
Team list disk I looked at the list of disks to select the one on which Windows was installed.
Team select disk 0 I chose my hard drive, it is number 0, the main thing is not to confuse it.
Executed the clean command to remove everything HDD partitions, including boot entry. All data on the disks will be deleted! 
I rebooted and tried to install Windows again. The problem never went away.
Connecting to another monitor
Connecting to the TV did not work. Connected via Svideo input, as well as HDMI. Through the second there is no signal at all, through Svideo there is a picture until the installer shell loads, but then again the black screen.
What is the problem?
- Video card
- CPU
- Power supply (Not enough power)
The first thing I decided to pay attention to was, of course, the video card. Why?
After a black screen appeared after the inscription, I checked some buttons on the keyboard, among them Caps Lock , And Num Lock, this means that the computer is not frozen.
And then I started typing different keyboard shortcuts, after pressing ALT+F4 and then Enter, the computer rebooted. And this combination is precisely responsible for exiting installation application Windows.
It turns out that the installer is still loading, but there is no picture. More like a problem There is simply not enough energy in the power supply and the video card, or there is some connection with the screen resolution, it is possible to use another monitor. But as I wrote above, you can’t see anything through the TV either.
And then I remembered that there was a working computer in the closet, I pulled out the video card from the system unit Asus (Nvidia GeForce 210), a card from the same manufacturer, but with a more powerful configuration, was installed earlier. This video card does not require additional power.
And lo and behold. The picture has appeared!
Of course, I should have checked the “vidyukha” right away, but I remembered that it was there quite late.
To remove the black screen during Windows installations, use all the methods indicated in this article, but first of all replace the video card. And then install Windows 7.
I also ask you to pay attention to this point. After use diskpart programs, you will have to delete and create new partitions in the Windows Installer, otherwise Windows simply will not want to install.
That's all, good luck everyone.
When installing operating system Windows 7 may experience a problem - freezing during installation. When the installation of Windows 7 freezes at the logo stage with the words Starting Windows, the cause of the problem may be malfunctions of the computer components: the hard drive, motherboard, random access memory. If the device breaks down, working with the system will not help - you just have to turn to repair specialists for help. If everything is in order with the hardware, but the Windows 7 installation window does not appear, then you can solve the problem in just a few steps, which we will describe in this manual.
The reason the system freezes on the logo is that it was not installed through the BIOS. Installing via BIOS is also called a “clean” installation because you format all data on the computer and accordingly delete information about previous system. How to install OS via BIOS?
Step 1. We insert boot disk with system () into the computer. Turn on or restart the PC.
Step 2. When the first inscriptions appear, quickly press the “Delete” key. The appearance of your BIOS varies by manufacturer.
Note! The design of the interface does not matter, since modern computers the basic BIOS settings are the same.
Step 3. If you managed to click “Delete” when booting the computer, the BIOS window appears.
Step 4. Move through items using the arrows on the keyboard. Press the right arrow until the “Boot” item opens.
Step 5."Boot" is responsible for booting the computer from specific device. By default, the computer boots from the hard drive. But now we need to install the system, which is located on a flash drive (or CD). Press the down arrow and .
Select the item “Boot Device Priority” - press “Enter”
Step 6. A small menu opens where we select the device from which the computer will boot. In our example, this is a DVD.
In your case, it may be the name of the flash drive or CD media. Select the device - press “Enter”.
Select the item “Boot Device Priority” - press “Enter”
Step 7 Exit the “Boot” tab – press Esc. This way the changes will be saved and take effect after a reboot. In the window that pops up, select “OK” and press “Enter.”
The computer will automatically restart. Problem solved - Windows will start " clean install"No freezes or crashes. It is by working with the BIOS that problems like “Win 7 won’t install!! hangs when starting installation."
Windows 7 freezes during installation and installs slowly - what to do
Does your computer freeze when installing Windows 7? We find a way to solve the problem.
The first thing you need to do is to look for the reasons for the slow installation of Windows 7. Let's look at the common sources of problems:
How to solve Windows 7 slow installation problem
For successful installation, two critical parameters need to be corrected:
- Serial ATA (SATA) Mode - switch to “AHCI”. It's more modern type data transmission. It will help not only in solving the installation problem, but also generally speed up the operation of the OS.
- Disable the floppy drive (“Floppy Drive”). Despite the fact that floppy disks are a thing of the past and you may not even have this device, we recommend disabling its use in the BIOS.
Disabling the floppy disk
Step 1. Open the BIOS and press the “Delete” key.
Step 2. Go to the “Advanced” tab.
Step 3. Select the “OnBoard Floppy Controller” item and press the “+” button. The text “Disabled” should appear opposite the line.
Step 4. Save the settings.
Change the mode to “AHCI”
About Windows operating systems
The Windows family of operating systems is the most popular. Microsoft Company has held a monopoly on the market for more than twenty years. For ordinary users the window interface has become familiar and convenient. But the main advantage software product Microsoft - support huge amount software Professionals from graphic designers and ending with programmers prefer Windows, since the programs they need for their work simply do not exist on other OSes. The vast majority of video games are supported by Windows, something neither Linux nor Mac OS can boast of. The abundance of drivers for any components makes the system universal and makes it easier to use. When purchasing a device, you will always be sure that it will work on Windows without problems. Consider history significant versions popular OS.
- Windows 95. Served as the starting point for the development of window systems. By combining the operating principles of MS-DOS and Windows family, the '95 system became a staple for desktop computers. Thanks to the simplicity of the window interface, Microsoft managed to occupy the niche of graphical operating systems and gain a foothold in the market. Start Menu long names files, drag-and-drop Plug and Play functionality became the foundation and signature style of all subsequent Windows systems;
- Windows XP. Released in 2001, the system created a real sensation among PC users. Before the release of the "seven", XP remained the main operating system. Simple, easy to install and use. Minimum occupancy disk space. Today Windows XP is not supported by the company, which affects its resistance to virus attacks. However, owners of low-power PCs and laptops install the system on their devices: it is not demanding on technology and works properly without taking up a lot of RAM or loading the processor. The only significant disadvantage of the system is its vulnerability to viruses due to the lack of updates. However, the problem is solved by installing latest version any reliable antivirus (Avast, Avira, Dr.Web);
- Windows Vista. Released in 2007. Was received coolly by the community. Visually beautiful, but demanding powerful computer and weak in terms of security, the system was a failure. Performance problems, poor driver support, and reduced capabilities turned out to be the main shortcomings of the OS. Nice GUI, as one of the few advantages, will go into the company’s next OS - Windows 7;
- Windows 7. The product was released at the end of 2009. “Seven” remained at the top in terms of installations for 8 years. The most reliable, simple and convenient system of all. It took the best of XP and became more productive. After the unsuccessful Vista, the "seven" was greeted warmly. Great personalization capabilities, support for a huge number of drivers, ease and speed of installation contributed to the system capturing the market. In 2018, it is still installed on computers, despite the end official support and lack of updates from Microsoft;
- Windows 8. It so happens that Microsoft succeeds “every time.” Metro's revolutionary flat interface was met with disbelief and criticism. Exactly appearance contributed to the failure of the system. The usual functions: personalization, uninstalling programs, shutting down and restarting have changed significantly compared to Windows 7. For an inexperienced user It became difficult to find them, and therefore, in order to start working, I had to delve into and study for a long time new interface. But the company made the right conclusions, modernizing the stability and appearance of the system, preparing an excellent release - Windows 10;
- Windows 10. Essentially, the system takes the best from Windows 7 and 8. Decent performance, additional settings for gamers to improve performance, store free applications and extremely easy setup parameters – the main advantages highlighted by users. After release, the system remained free for several months - for the first time in the history of Windows. Windows 10 is installed on new laptops by default. So, when buying a new device, you won’t have to pay extra money to purchase a license. Additional benefit systems - versatility. Windows 10 can be installed on both a computer and mobile devices: smartphones, tablets, and even Xbox. Multiplatform ensures synchronization of settings and data into a single account user. All the innovations and improvements helped the “ten” overtake Windows 7 in popularity and become a universal operating system for personal computers.
Video - Starting Windows freezes when installing Windows 7
Hello dear friends! This weekend I came across a computer on which I needed to install Windows 7. But a problem appeared that I encountered for the first time. When I started the installation of Windows 7, the installation window did not appear (first window, language selection). And then the seven took a very long time to install. If you have the same problem when Windows 7 takes a long time to install, And The installation window does not appear, then now I will write how to solve this. By at least I'll tell you how I solved this problem.
I'll probably start from the beginning. They called me and asked me to come and look at the computer, and then: the Internet does not work (Intertelecom there), the antivirus always shows some window, nothing starts, etc. In short full set all sorts of various breakdowns. And I’ve already dealt with this computer, such a powerful “machine”, new, only Windows XP is installed on it, not that it’s bad, it just surprised me. And when I asked the owners why Windows XP was installed, they said that they installed it in the store. I said that it wouldn’t be a bad idea to set it to seven, after all, it’s newer, and on the same hardware.
I came a second time, turned it on, and there was something incomprehensible there. Perhaps it was a virus that worked this way, or it was children :), but Avast stuck some kind of warning, there were almost no icons on the notification panel, the Internet did not react in any way to an attempt to open a connection, the theme was changed, and it was not possible to return to the standard one. And many more different unpleasant moments.
I looked and decided that it would be easier to demolish everything, format the C and . After explaining everything to the owner of the computer, we decided that we would do just that.
Everything is fine, the computer rebooted and booted from the installation disk. The file loading bar appeared when installing Windows 7, and when the language selection window should appear, nothing happened. The window did not appear, there was only a splash screen (well, the same as when installing seven) and a cursor. I waited about three minutes and restarted the computer. I realized that something was wrong. I decided to go into the BIOS again and look at the settings. Now it’s clear why the store installed Windows XP; most likely, installing Windows 7 failed.
I eliminated the problems with my installation disk immediately, I have installed it more than once. Yes, and I had an exact copy, with which the Windows 7 installation window also did not appear. I didn't see anything strange in the BIOS, and... It did not help, Windows 7 was not installed, the language selection window did not appear. I decided to open the system unit and see how and what is connected there. I didn't see anything interesting there. By SATA interface The hard drive and optical drive were connected.
I tried to run the installation again. I launched everything the same, only the background, but there is no window with a choice of language. I decided to wait. About 5 minutes later a window appeared with a choice of language, well, at least it’s something, I thought. I clicked next and the message appeared “Starting installation...”, and that's it. The computer was “thinking”, I understood this from the fact that the cursor was spinning (something was loading), I decided to wait a little.
After about 10 minutes, a window appeared in which I selected a clean installation of the system, again waited 5 minutes, formatted the partition for Windows 7 and began copying files. They took longer to copy than they should have, it seemed to me. In short, with grief in half, I installed Windows 7. Then I realized what a long installation of Windows 7 was :).
Slow but established
The computer worked as expected from such hardware, very quickly. All that remains is to configure it. But I didn’t have a driver for the modem, so they decided to take the system unit to me and pick it up the next day.
Finding reasons for slow Windows 7 installation
At home, I set everything up, and decided to torture the computer a little more and find out why it was taking so long to install Windows 7, I was interested. Moreover, I did not find a specific answer to this question on the Internet, only guesses.
Setting up a SATA hard drive in BIOS
To begin with, I opened the system unit and changed the hard drive and drive connections. HDD I connected from SATA 0 to SATA 1. And the CD/DVD drive is in SATA 3.
Then I went into the BIOS again. I was interested in the settings SATA controller. Chapter .
Against OnChip SATA Controller the parameter was Enabled. Okay, then we see the item, I have the Native IDE option. This is not very good for a SATA hard drive, as it will not show all its capabilities.
Changed the parameter value to AHCI (the most the best option for SATA drives). I tried to turn on the computer. The drive was not detected at all, and as soon as Windows 7 started loading it blinked blue screen, and the computer rebooted.
I decided to put RAID in the parameter instead of AHCI (combines disks into an array), nothing worked (I knew it was useless, but decided to try), everything is the same as with AHCI.
Installed it back Native IDE. All these experiments did not help. Although it is very strange why AHCI did not work, I never understood it.
Disable Drive A
I also saw that opposite the Drive A table there was a parameter “1.44MB, 3.5”. This is a disk drive, and this computer does not have one. So I set it to “None” to tell the system that it is missing.
I saved the settings by pressing F10. Put installation disk with Windows 7 and tried to run the installation again to check how the seven would be installed, just as slowly or faster.
And to my surprise, everything worked as expected, a window quickly appeared with a choice of language and so on, I quickly got to formatting the disk. Of course, I didn’t format it, since the computer was already set up and should have been picked up by now.
How to solve the problem of slow installation of Windows 7?
Let's summarize, otherwise I've scribbled a lot of text :). There was a problem with installing Windows 7, it took a very long time to install, and I had to wait a lot until the window with the choice of language appeared, and then “Starting installation...” hung for a long time.. If you have such a problem, then you can just wait and everything will be installed. I have it installed.
If you want to try to solve this problem, then:
- Try setting AHCI next to the item in the BIOS (most likely it didn’t help me).
- Change SATA connectors for the hard drive and drive.
- Disable Drive A (disk drive).
I did the last two steps, and the installation of Windows 7 went quickly. I can’t say with 100% certainty that this is what helped restore the normal installation speed of Windows 7. But in any case, you need to try.
Sorry that there was so much text, I just wanted to describe everything in as much detail as possible. I hope that my experience was useful to you, if you managed to solve this problem, in this or some other way, write about it in the comments, it will be interesting and useful. Good luck friends!
Also on the site:
Windows 7 takes a long time to install. The Windows 7 installation window does not appear. updated: January 12, 2015 by: admin