Award bios does not see the flash drive. System file INFCACHE.1 - the root of all evil


Manufacturers of laptops and computers are increasingly abandoning bulky CD drives. This is understandable, because it allows you to save a lot of space and make the device much more compact.

As a result of this new trend users need to install operating system not from a CD, but from a USB drive, and, as usual, this entails certain problems. For example, sometimes the BIOS does not see a flash drive, which means that further work with it becomes impossible. You can read below about how to fix this.

Flash drive malfunction

The first thing to check is the functionality of the USB drive. It is quite possible that the BIOS does not see bootable USB flash drive due to its malfunction. In this case, the device can safely work as a storage for files, but will cease to function if used as a Boot device.

It is best to check the serviceability of the flash drive on another computer or laptop. To do this, just try to use it like boot device, and if everything goes well, then your USB drive is not damaged.

If you don't have a second computer, you can use alternative ways checking the functionality of the flash drive. For example, you can simply connect it to a different port, or even write the operating system image to another drive and try to boot from it.

USB port problem

If the BIOS does not see a flash drive that you are completely sure is working, you should check the functionality of the USB port. This is much easier to do than with a USB drive, because you don’t need another computer or laptop for this operation.

So, you just need to connect the flash drive to different ports one by one and try to boot from it. Yes, this operation requires a lot of time, but thanks to it you will completely eliminate one of the possible reasons BIOS errors occur.

Separately, it is worth highlighting the USB ports located on the front wall of the system unit, on the keyboard, various extension cords, and so on. It often happens that they begin to function only after full load operating system. Simply put, when the computer starts, they do not work, and accordingly, the BIOS does not see the flash drive. What to do in such a situation? Use the ports located on the back of the system unit.

USB 3.0

Modern computers and laptops are equipped with new devices for working with flash drives - USB 3.0. They provide where higher speed operation of the drive, but at the same time can cause certain problems. Including sometimes the BIOS does not see a bootable USB flash drive if it is connected to a version 3.0 port.

It’s worth saying here that the malfunction does not arise due to the inability of older versions of Windows to work with USB 3.0 during installation. For example, you will not be able to install Windows 7 from a flash drive connected to 3.0, but already in the “eight” and “ten” there is no such problem.

Fortunately, manufacturers took into account possible problems related to compatibility. They provide computers with both USB 2.0 and USB 3.0 ports. The latter, by the way, are painted blue. So, if your flash drive does not work in the 3.0 connector, you can try removing it and connecting it to USB 2.0.

"Broken" image

Another reason that the BIOS does not see the flash drive may be a “broken” image of the operating system recorded on it. Damage to OS installation files can occur either while downloading them from the Internet or during writing to a USB drive.

The problem is that you will not be able to repair a “broken” image. The only thing you can do is download it again setup files, and then install them again on the flash drive. In addition, following the advice computer specialists, you can check the USB drive with the image recorded on it for errors and bad sectors.

It is also worth mentioning unlicensed versions of Windows OS. Pirates don’t bother much when creating them, so very often problems arise when trying to make a bootable USB flash drive from such files. In other words, you should try downloading a distribution from another team, or even better, use only licensed software.

The image is written incorrectly

Very often, the BIOS does not see the flash drive because the operating system image was written to it incorrectly. Some users simply copy the installation files to a USB drive and then try to boot from it. Yes, this option may work in some cases, but it is by no means correct.

In fact, you only need to create a bootable USB flash drive using special programs. Such applications are provided by both the creators of the operating system and third party developers. For example, very popular are UltraISO programs, Rufus, WintoFlash and so on. Each of them fully copes with its functions, so it’s difficult to single out a favorite.

Recording with Rufus

Since the most common cause The “invisibility” of a flash drive is an incorrectly recorded image; you should definitely figure out how to do it correctly. As an example, we will take the Rufus program, which is easy to learn. So, to create a bootable USB flash drive, follow this algorithm:

  • Connect the USB drive to your PC and launch Rufus.
  • In the main menu of the application, find the line “Device” and select your flash drive in it.
  • Now click on the CD-ROM icon located opposite the “Create” option boot disk" Using the Explorer window, specify the path to the operating system image.
  • If necessary, you can enable the function of checking the device for bad blocks by checking the box of the same name. But please note that this operation will increase the time it takes to create an image by two or even three times.

Now all you have to do is click the “Start” button, confirm your decision and wait for the operation to complete. Remember that it is strictly not recommended to remove the flash drive while the program is running.

Incorrect BIOS setting

So that the PC starts from a USB drive, and not from hard drive, you need to set the download priority correctly. IN Award BIOS, for example, it is done like this:

  • Enter the BIOS by pressing the appropriate key while the computer boots. Most often this is F2 or Del, but sometimes there are other options.
  • Open the Integrated Peripherals section and check if the USB Controller option is Enabled. As a rule, it is enabled by default, but it is still worth making sure of this.
  • Now go back to the main menu (ESC key) and go to Advanced BIOS Features. Next, open the Hard Disk Boot Priority subsection.
  • Find the HDD-USB parameter and move it to the first line using the Plus key.
  • After that, return to the previous menu, open First Boot Device and put HDD-USB in first place.

  • Press F10 to save your changes and then exit Settings.

Keep in mind that in other BIOS versions, the procedure for setting boot priority may differ slightly from the Award BIOS. You can find details about it in the manual on the manufacturer’s official website motherboard.

Secure Boot

On computers and laptops released after 2013, this is quite common. Secure function Boot. Its purpose is to prevent malware from being installed before the operating system starts. However this service may block the operation of the bootable flash drive, so you need to disable it. This can be done like this:

  • Go to the BIOS and open the Boot section (sometimes called Advanced).
  • Find the Boot List Option and change it to Legacy.

  • Set the Fast Boot option to Disabled.

Now all you have to do is set the boot priority and start installing the operating system. The main thing is to remember to turn it back on Secure Boot after there is no longer any need to use a bootable USB flash drive.

Old BIOS versions

If you are the “lucky” owner of an outdated computer, there is a high probability that it does not know how to work with USB drives at all before loading the operating system. More precisely, it is the old BIOS that does not see the flash drive, since earlier, in the era of CDs and floppy disks, there was simply no such need.

This problem can be fixed by updating the BIOS to current version. The files and programs needed for this procedure can usually be found on the website of your PC or laptop manufacturer.

Keep in mind that the process of updating (firmware) BIOS is associated with great risks, and it is better not to start it without the proper skill. If you do something wrong, you can cause damage to your computer, which only specialists can fix.

Alternative options

So, you have tried all the methods outlined above, but the BIOS still completely refuses to work with the flash drive. In this case, you can use two alternative options.

The first one is installing the OS from a disk. If your computer has a CD-ROM, feel free to create a bootable CD and install the operating system from it. In addition, you can temporarily borrow a CD drive from friends and connect it to your PC.

The second option is to use the Plop Boot Manager utility. It is installed on the hard drive and allows you to select the boot priority without having to go into the BIOS.

Every user is certainly faced with the need to reinstall the operating system on their computer or laptop. IN Lately It is more rational to carry out such an installation using regular flash drive, making it bootable.

This installation is fast and reliable, and to create bootable media Now it's easier than ever. But sometimes the user may encounter one problem that prevents him from conducting normal installation systems - BIOS does not recognize bootable USB flash drive.

When connected to computer device It turns out that the flash drive is simply not detected by it, as if it doesn’t exist. Even after entering the BIOS (UEFI), the user does not find the drive in the Boot Menu. Below it will be explained why the PC does not see boot drive in the BIOS, how to correct the situation and make it visible.

Why is the bootable USB flash drive not visible in the BIOS?

The main reason why a bootable flash drive is not visible in the BIOS is a discrepancy between the boot modes specified in the BIOS and those supported by the drive itself. Why is this happening? Because modern computers have 2 boot modes: Legacy and UEFI. On older devices there was no such choice. So, only one of these modes is enabled in the device.

If the UEFI mode is set, then the drive on which the system image for Legacy mode is written will not be displayed in the BIOS. Accordingly, you won’t be able to select it as a boot one. In this mode, images for Windows 7 systems are usually recorded. If Windows is installed, then, as a rule, there are no problems.

What to do to make the BIOS see the bootable USB flash drive

2 options for solving the problem.

In a situation where the BIOS does not see the bootable USB flash drive, you can do one of the following two actions:

  1. In the BIOS you need to disable support for the second mode, which will not be used. After entering the BIOS, go to the Boot tab and simply set the mode you need to the value "Enabled". Sometimes this item is not easy to find. For example, it might look like choosing an operating system. In this case, the proposed options may be:
  • Booting Windows 8 or 10 systems for UEFI mode.
  • Booting another system (Other OS) also for Legacy mode.


If you are using a bootable USB flash drive designed only to boot in Legacy mode, you must disable Secure Boot in the BIOS. To do this, go to the field "Secure Boot" indicate value "Disabled". On some laptops and PCs, you just need to select Windows 7 to disable secure boot.

To see if Secure Boot is enabled on Windows systems 10 or 8, just press on the keyboard Windows combination+ R, and then enter the expression in the line "msinfo32". After pressing "Enter", information about the system installed on your computer will be displayed, where you can find an item displaying the status of your secure boot.

  1. Rewrite the data onto the flash drive again, choosing a different boot mode. This option is only possible for new images created recently. If you are recording an image that is a year old or older, it will only support Legacy mode.

If the recorded image is supported for both modes, it is not necessary to change the BIOS settings. It is enough to rewrite the system image. However, please note that for recording Windows images 7 and XP will require mandatory disabling of Secure Boot.

It is very easy to create a bootable USB flash drive in Rufus program. Before you start recording data, you can choose which boot mode the drive will be written to. The default (for most cases) is MBR mode for UEFI and Legacy. But you can choose MBR with UEFI or GPT with UEFI mode.

Important note! Many users do not understand one thing important moment. For a flash drive to be visible in the BIOS, it must be bootable. That is, it is not enough to simply write an image of a system onto a USB drive and then install the system from it. You just need to create a bootable drive using one of the special programs.

You might be wondering how to use a USB flash drive to increase RAM computer().

Using these tips, you can easily install any operating system on your device using a bootable USB flash drive.

As a rule, all modern computers are equipped with special DVD drives that can easily read any disc. They are also equipped with new laptops, the manufacturers of which strive to keep up with the times.

However, sometimes there are situations when you simply need to resort to the help of a tool such as BIOS. Many novice users do not understand what it is, so they will be interested to know that BIOS is the component without which the computer is simply impossible to operate. In other words, when you turn on the device, some module must check for the presence of all the necessary files and drivers to start the operating system. This is exactly what the BIOS does. In addition, a component such as the BIOS checks general state components in system unit, which must be in full working order at the time of starting the computer. If something is broken in them, the BIOS will report this and will not be able to turn on the computer. That is why you should know which ones are used in the BIOS.

It should be noted that some users have a lot of problems with this component. And as a rule, they arise precisely when reinstalling the operating system. The entire system is built on English language, and often it is not even clear how to set priorities when loading. What can we say about some complex technical aspects.

What if the BIOS does not see the flash drive?

One of the most common problems is that very often the BIOS does not see the flash drive. In other words, there was
a certain bootable media was created, from which, for example, it was subsequently planned. And now, when this media is in the appropriate slot, the BIOS does not see the flash drive.

Why is this happening? There can be many reasons, ranging from illiteracy of users to technical malfunctions, because of which the BIOS does not see the flash drive. But still, often the component does not see the flash drive due to the fact that the user did something wrong. Therefore, if the device does not see the flash drive, you must first check whether the information is written to it correctly. After all, it very often happens that the user simply does not have enough knowledge in order to correctly create a bootable USB flash drive. In this case, the BIOS, accordingly, does not see the flash drive. So, if the component does not see the USB flash drive, it is best to rewrite the bootable USB flash drive.

Is the bootable USB flash drive written correctly?

The occurrence of such a problem when the computer does not see the flash drive depends on whether the user has written down the bootable USB flash drive correctly. In order to correctly create a bootable USB flash drive, you must follow certain instructions.

How to create a bootable USB flash drive? In order to correctly create a bootable USB flash drive, you must:

  • prepare an appropriate image;
  • download a special program to your computer;
  • insert the flash drive into the appropriate port;
  • press the button provided for this to start the process;
  • make some settings;
  • confirm the operation.

It is worth understanding each point in more detail:

  1. A special program that is suitable for creating a bootable USB flash drive is UltraISO utility. In order to record an image using it, you must first find it or create it yourself. It must be said right away that the process itself is not particularly complicated, so even a beginner can cope with it.
  2. After the image and program are selected, you should place the USB drive in a special slot and select the function that is responsible for writing images from the hard drive.
  3. In the next step, you need to do some manipulations with the settings so that there is no problem in which the component does not see the bootable USB flash drive. All these settings are quite simple and straightforward, so there should be no problems with them. So, you need to select the appropriate recording device, then install USB option HDD and select the item where it says “no”. After all of the above, you can move on to the process of creating the entry itself, which will help eliminate the problem when the BIOS does not see the bootable USB flash drive.

  4. I would like to say right away that with such a process, all information contained on the medium will be destroyed. Naturally, the program itself will warn you about this. So, if there is some important data stored on the disk that may be needed later, it is best to move it to another location. This point is important for those who want to make sure that their computer sees the bootable USB flash drive. If something goes wrong and the BIOS still does not see the bootable USB flash drive, you need to repeat all the above steps.
  5. After the notification appears successful creation disk, there is an opportunity to proceed, which also needs some modernization. Only then can you be sure that the device sees the bootable USB flash drive. After carrying out all the above manipulations, the computer usually sees a bootable USB flash drive. If an error occurs, you should definitely start all over again, once again carefully looking at the details.

    6. Some important BIOS features

    By the way, there are some unfavorable factors that contribute to the fact that the BIOS does not see the flash drive. So, if the BIOS does not see the media, you should make sure that everything is necessary files were copied onto it. Oddly enough, this trick often does not work, which is why the BIOS does not recognize the disk. That is why, if the BIOS does not see the bootable USB flash drive, you need to turn Special attention on this factor. If you check and eliminate this kind of reason, it can help deal with the problem when the BIOS does not see the bootable USB flash drive.

    In order to avoid a problem in which the BIOS does not see the device, you must use special programs to make the recording competent and of high quality. If the BIOS does not see the disk, you should think about which utility you need to give preference to so that every element written to the flash drive is readable. In other words, you should decide which program is suitable for a specific operating system, so that there is no problem in which the BIOS does not see the device. It should also be noted that if the BIOS does not see the required element, you can use the option given above. It fits perfectly any Windows and at the same time provides high-quality results. So with this utility you can forget about the problem when the BIOS does not see the required device.

    You should also pay attention to the fact that not all programs that are recommended by certain manufacturers eliminate the problem in which the BIOS does not see an element. Thus, there are many effective and interesting utilities that they can boast of large manufacturers, cope with eliminating the “BIOS does not see the device” problem much worse than the above option.

    It should also be mentioned that the BIOS itself must be properly configured in order for the boot to be successful. In particular, the BIOS must support such an option as booting from USB, and also be able to prioritize when performing this action. Naturally, for this purpose, some of the settings will have to be done manually. For example, you will have to choose the option from which the process itself should begin. As practice shows, there is nothing particularly complicated here, so even a beginner can cope with such an action. The most important thing is to spend a little time studying the system itself and understanding how it works. It is impossible to give clear recommendations on this matter, because this menu is different for everyone, as it depends on the type of motherboard.

Installing Windows 7 is a simple and streamlined process, but it is far from ideal. Therefore, situations may arise when the installation wizard simply does not see certain devices computer, preventing the user from normally completing the started procedure. And if you have such difficulties, read the contents.

Windows 7 installation does not see USB mouse and keyboard (we solve the problem with BIOS settings)

If your Windows 7 installation does not see a mouse or other input device, the first thing to do is check USB ports into which these peripheral devices are inserted.

Blue ports (USB3.0) can not supported master, and therefore you should at least during installation move the equipment to the ports gray (USB 2.0 ).


In most cases the problem will be resolved. Otherwise, do the following in order: actions inBIOS(later in the article, these actions will be described step by step):

  • Disable(Intel) "xHCI Mode » in the tab « Advanced » ;
  • Try a different item value « USB Legacy Support" ;
  • Reset BIOS.
It is not necessary to do all three steps at once.
Check the functionality of your mouse and keyboard after each step, starting from the first. First you need to go into the BIOS. More details on how to login BIOS on various devices (desktop computers or at different brands laptops) you can look in this article: how to enter the BIOS. Restart your computer and at the motherboard logo, enter « Setup Menu » by pressing the key F1 (F2, F12, Delete- depending on BIOS). Now let's get started:

Step 1 – disable (Intel) xHCI Mode

You can find this option in the tab « Advanced » on the menu BIOS.

  1. Let's go to « Advanced » , navigating with arrows on the keyboard;
  2. Change the mode to « Disabled » in point « xHCI Mode » ;

Figure 1. Set xHCI Mode to Disabled.
  1. Save settings by going to the tab « Exit » and selecting " Exit Saving Changes »;
  2. We check the mouse and keyboard and try to install the OS again.
The first action helps in the vast majority of cases. Move on to the next heading if:
  • Line « xHCI Mode » absent;
  • Execution of item « Action 1» did not give any result.

Step 2 – switch USB Legacy Support mode

Unlike described above, the option « USB Legacy Support" available for editing on the vast majority of systems.

It is also located mainly in the tab « Advanced » . We need to change the mode of this function to the opposite ( "Enabled" on « "Disabled" or vice versa).

Figure 2. Changing the USB Legacy Support value.
Do not forget save changes in the tab « Exit » by selecting the option " Exit Saving Changes ", the computer will restart automatically.

We check our devices by running the Windows installation again. If the peripheral still doesn't work, you should try reset motherboard settings.

Step 3 – reset the BIOS (if the previous steps do not help)

To return the BIOS to factory settings, you must:

  1. Go to tab « Exit » (usually follows Boot);
  2. Select the item " Load Setup (Optimal) Defaults » → confirm the action by pressing « Yes " The computer will restart.
These steps are likely to help solve your problem with USB mouse yu and keyboard. Otherwise, you should check the peripherals for hardware failures on another computer. Also try connecting other devices.

Solving a problem when using a PS/2 keyboard and mouse

Failures in these devices occur quite rarely and are mainly associated with BIOS and hardware failures. Before you do the following Necessarily Turn off the computer's power. This precaution is due to the fact that the ports PS/2 It is highly recommended not to touch it while the system is running. If you are using standard PS/2 periphery, you should:

  • Check and clean the keyboard and mouse connector/port from various types pollution;
  • Try similar USB equipment;
  • Swap the mouse and keyboard connectors;
  • Update Motherboard BIOS boards up to the latest version.
If all of the above doesn't help, try using another copy Windows 7. Lack of support PS/2 devices may be due to the fact that a particular assembly does not, in fact, contain outdated drivers for these devices (may be cut from the final image).

The computer does not see the bootable USB flash drive and/or other USB devices when installing Windows 7

The solution to this problem is quite simple in most cases. And before you start delving into this chapter, you need to do the following: If the installationWindowsdoes not seeUSBdevicesat all, please contact . It provides some general steps to resolve the most common problems.

Windows 7 Setup Wizard does not see the hard drive (SSD) or asks for drivers

Before you begin performing actions that affect the software, you need to make sure that the drives are working and the computer settings are correct. Note. Next actions are also relevant forSSD. If in the window for selecting a disk to install absent the desired “hard drive” (hard drive), try first:

  • Check HDD/SSD cables and mounts;
  • Disable extra drives, leaving only the one on which the OS will be installed;
  • Switch mode « SATA Mode » With « AHCI » on « IDE » (any other available);
Let's take a closer lookthirdparagraph. To do this you need:
  1. Turn off computer;
  2. Enter BIOS (or « Setup Menu » ), by pressing the button F1 (F2, F12, Delete) immediately after turning on the computer at the stage when the logo of your motherboard manufacturer is displayed on the screen;
  3. Using the arrows, find the item in the menu « Configure SATA as » or « SATA Configuration / Mode » (depending on your BIOS);
  4. Change mode « AHCI » on « IDE » or « RAID » ;

Figure 3. Set the value IDE for the Configure SATA as line.
  1. Save settings by selecting the item « Exit Saving Changes » in the tab « Exit » . The computer will restart with the changed configuration.
Now you can try the installation again. Continue to the next chapter if:
  • The OS installation still does not see your HDD or SSD;
  • Mode « SATA Mode » has already been posted on « IDE » .

Manual installation of HDD or SSD drivers

It is recommended that you move on to this chapter after fully reading the previous one. This will help eliminate unnecessary actions.
In most cases, installation image already contains software for many storage controllers (SATA drivers). However, if the board model of your computer/laptop is quite recent (or, conversely, old), drivers may simply be missing.

Therefore, we need to “specify” them ourselves at the selection stage system disk. Next instructions will describe this process in more detail. Let's get started.

STEP 1 – finding what you need software .
Download drivers from the website of the manufacturer of your laptop or motherboard. First of all, we focus on files that include one or more examples of words: INF, SATA, RAID, RST.

STEP 2 – unpack and reset to media with the OS image.
Unzip the downloaded file into separate folder→ copy it to any place on installation flash drive.
note that the drivers we need must not contain executable ". exe" files. Will only fit unpacked(such drivers usually include the following folders: amd, x64 , as well as many . inf files).
STEP 3 – specify the required software in the disk selection window.
Insert the flash drive into the computer → we reach the disk selection stage for installation. Here you need to find a button(or "Review" ) and click on it.

An explorer will open in which you need to specify the required driver .
Figure 4. Select the desired folder with driver.
HDD(SSD) will be detected if the appropriate drivers are selected. Now you can continue the process by selecting the appeared SSD drive.

The drivers are installed and the drive is displayed. However, the wizard does not see or does not allow you to select the desired section

In this case try remove markup HDD/SSD directly in the window disk selection. Attention! The following actions lead to formatting drive and, consequently, to complete loss of data. Make sure everything is yours important files saved on a separate disk.To do this you need:

  1. Press the button "Disk Setup" at the disk selection stage;
  2. "Delete" all available partitions to begin installation on unallocated space
  3. Check the integrity of the OS image on the installation disk;
  4. Re-write the image to another disk at the minimum speed;
  5. Use flash drive(preferably USB versions 2.0) instead of CD;
  6. Make sure the drive is working: check the connection, power supply contacts, functionality of the motor and drive.
    7. The above steps will help solve your problem. Otherwise resetBIOS and try a different OS image/build.

    Also, in extremely rare cases, reinstalling the driver for DVD drive. Detailed information can be found in the “” chapter, and drivers for the drive can be found on the manufacturer’s website.

    Conclusion

    If none of the above methods help, try looking for the problem in the computer components (on your own or with the help of a specialist).

In order for the computer to start not from the hard drive, but from a USB drive, you need. Such a flash drive is used for system recovery, password reset and other “rescue” missions. But how to select a media if it is not displayed in the BIOS settings? You can solve the problem yourself. Provided that the drive is working properly and data is being read from it.

How to fix the problem: BIOS does not “see” the USB flash drive?

Check if USB device support is enabled. How to do this depends on the motherboard model. After turning on the computer, the message “Press [key] to enter Setup” will appear at the bottom of the screen. Click it to enter BIOS. And look for a menu that has “USB” in its name.

New BIOS versions

You can work with new BIOS versions using a keyboard and mouse. There is also support for the Russian language. You will quickly understand the parameters. But even if it is not there, you will be able to configure the boot order and launch via a USB flash drive.


Award-BIOS

After starting the BIOS, do you see two lists on a blue background? Then you have the Award version. You won't be able to navigate through the menu by clicking the mouse. It can only be configured using the keyboard. Below or on the side there will be instructions on which buttons to press for this.


Now let's take a look at boot priority.


When you are finished working with the drive, return to the previous BIOS settings.

AMI-BIOS

In the AMI interface of the BIOS gray screen, blue font and a row of bookmarks at the top. The information block is on the right. Mouse control is also not available.


Now you can change the bootloader parameters:


Phoenix-Award BIOS

In BIOS Phoenix-Award there is also a gray screen. Information about which keys to press is located below and highlighted green. If the computer does not boot through the drive:


UEFI

You enabled USB support, but for some reason the flash drive is not in the BIOS? The problem could appear due to UEFI - a mode that “protects” the bootloader from malware and foreign code. This module will start the operating system even if you have configured the BIOS correctly. What to do? Disable UEFI.

Settings depend on the motherboard manufacturer. First way:


Second way:


After working with the media, re-enable “boot protection”.

You need the “right” flash drive

Perhaps it's the flash drive itself. More precisely, in the way it is written. If you copy information onto it directly, nothing will work. But why is it necessary to create a “bootable” drive? To run it, you need some kind of “software script”. Without it, the system will not understand what to do with the media.

To create a bootable USB flash drive from the LiveUSB utility:

  1. Insert the drive into the slot.
  2. Run the installer.
  3. Select your Flash media from the list.
  4. Confirm installation.
  5. Now through this drive you can “reanimate” the system.

To install a third-party OS, you need a ready-made ISO image and a burning program. For example, UltraISO or Rufus. Let's look at the second one:

  1. Insert the drive into the USB port.
  2. Launch the program.
  3. Check the “Create a boot disk” checkbox.
  4. Click on the disk button.
  5. Specify the path to the image.
  6. Click on “Start”.

You can create a bootable USB drive using Windows.


If the BIOS does not “see” the bootable USB flash drive, perhaps the problem is not in it, but in the settings. There is no need to throw it away ahead of time. First try changing the BIOS configuration.


2024 gtavrl.ru.