Apple tv 4 flashing no picture indicator. What is Apple TV, how to use it? How to turn on and set up Apple TV? Apple TV crashes


It does not turn on, and the indicator is blinking - do not rush to contact service. In most cases this is due to software glitch, which can be solved by restoring (flashing) the set-top box in DFU Mode.

In contact with

As with the iPhone and iPad, this procedure will detect the device in iTunes and restore factory settings or install new firmware.

It is worth noting that if the Apple TV does not turn on (while the indicator on the front panel is blinking), the set-top box may not be detected in iTunes on the computer, which makes it impossible standard process recovery. In many cases, in order to “see” an Apple TV with a software glitch in iTunes, you need to switch the set-top box to DFU mode.

What is needed to reflash (restore) software on Apple TV in DFU mode?

  • Apple TV;
  • Mac or Windows computer;
  • iTunes with the current (latest) firmware version (you can download);
  • Cable (for set-top boxes of the fourth generation and higher) or microUSB (for older versions). Please note that they are not included with Apple TV.

1 . Connect Apple TV to your computer via USB-C cable. Simultaneous connection it is not required to connect to the TV via HDMI.

2 . Open iTunes program on Windows or Mac.

3 . Reboot the device: press and hold the buttons Menu And Home on the remote control Siri controls Remote (Apple TV 4) or Menu And Down on older models for 6 seconds until the indicator on the set-top box starts blinking quickly.

The moment you release the buttons, the device will reboot.

4 . Literally 1 second after you release the buttons Menu And Home press and hold the buttons Menu And Play/Pause until (about 10 seconds) iTunes tells you that the Apple TV is in recovery mode (DFU).

5 . Resetting (flashing, restoring) Apple TV to factory settings (all data from the device will be deleted!) is done by pressing the button Restore on iTunes. After which it will be automatically downloaded from the Internet and installed on the set-top box. newest version tvOS.

6 . If the firmware for Apple TV has already been downloaded to the computer earlier (for example), then to flash the firmware you need to click the button Restore along with the key ⌥Option (Alt) for Mac ( ⇧Shift + Restore for Windows). Next, specify the path to the firmware file.

After installing the software, a reboot will occur. To activate the set-top box, you will need Internet access.

Wonderful apple Apple consoles TV! And today I would like to talk about a small problem that can happen to her. I think some of you have already seen a picture on the screen where Apple TV requires a connection to iTunes. Everything seems simple, but, as always, there are some pitfalls...

So, first we need to disconnect Apple TV from the TV and disconnect all cables. Next, we need a computer with installed iTunes latest version. Among other things, we need micro USB cable<->USB, which is naturally not included, but can be easily purchased at any store consumer electronics. if you have full set From all of the above, then you can get started!

Flashing Apple TV

We connect the Apple TV to a power outlet, and use a micro-USB cable to connect it to the computer. If your console went crazy in recovery mode, it should show up in iTunes. But sometimes, iTunes may not see the connected set-top box. In this case, there is no need to run to the store for another cable; just enter the Apple TV into DFU (Device Firmware Update) mode.

To activate this mode, you need to connect the power cable to the set-top box, connect the Apple TV to the computer and click on the following combinations on the remote control Apple management Remote:

1) Press and hold the Menu and Down buttons for 6 seconds. After this, you will see that the indicator on the set-top box has gone out.

2) Without releasing the Menu button, release the Down button and press Play, and hold Menu and Play for 6-7 seconds until the console appears in iTunes. After this, you need to wait 10 - 15 seconds. If everything is done correctly, the indicator on the Apple TV will start blinking quickly, and the following image will appear on the computer screen:

After that, click on the “Restore Apple TV...” button and follow further instructions. If everything went well, then at the end, you can reconnect the set-top box to the TV and start using it!

If for some reason you were unable to produce Apple flashing TV, don’t despair - you can write in the comments about your problem or :)

Received many improvements, including voice support Siri assistant, a lot of applications and a touch remote control. But no device is flawless, and Apple owners TV periodically encounter various problems. Fortunately, users can handle most of them on their own.

In contact with

Just like in smartphones, applications on Apple TV can slow down, freeze completely, or work incorrectly. In such situation The best way To solve the problem - force close the application. To do this, press the button twice Home", swipe right or left to highlight an app and swipe up on the Siri Remote touchpad.

Apple TV is slow, glitchy and doesn't work properly

Not only applications can hang, but also the set-top box itself. In such cases, simply reboot your device. This can be done in two ways: by opening " Settings» → « System» → « Reboot» or simultaneously holding down the buttons Menu And " Home" until the indicator light on Apple TV starts flashing quickly.

When you release the buttons, Apple TV will begin to restart.

Apple TV won't turn on (the light is blinking)

Remote control for Apple TV does not work

If the Siri Remote stops responding, first try using Lightning port at the bottom of the body. Charge level in the " Settings» → « Remote controls and devices» on Apple TV by using your iOS device as a remote control.

If the problem persists, try resetting the Siri Remote by pressing the button at the same time Menu and buttons increase the volume. Hold the buttons for 2 seconds.

In some cases, Apple TV stops playing audio without apparent reason. If you encounter similar problem, try restarting your TV and all speaker devices connected to your Apple TV. Usually this is enough. If the above method does not help solve the problem, also make sure that all audio settings are set correctly. To do this, open " Settings» → « Audio and Video" and make sure that the "Audio Output" option is activated and the correct speakers are specified, and in " Audio mode» option selected « Automatically».



Lack of free space on Apple TV

Users downloading to Apple TV a large number of, may eventually face shortages free space. Delete unnecessary programs may with home screen by following these steps:

1 . Select the application you want to remove and press the touchpad until the icons begin to vibrate;

2 . Click on the button Pause\Play»;

3 . Select " Delete»;

4 . Confirm the deletion by clicking on " Delete».

This method allows you to remove only one application at a time. If you want to remove a large number of programs, but do not want to waste time, there is another way. Go to the section " Settings» → « Basic» → « Storage management" You'll see a list of apps sorted by file size. Next, tap on the trash can icon next to each app and tap " Delete».

Today we will try to solve the most popular problems that arise when connecting your device to a wireless network (wi-fi). The answers apply to all three Apple generation TV unless otherwise noted.
Yours wireless network doesn't appear in the list on Apple TV.

  • List of available wireless networks that are displayed in the menu Configure Wi-Fi / Configure Wireless is not updated automatically when a new wireless resource becomes available. In order to update the list you need to:
    • Press the Menu button
    • Path: Settings > General > Network > Configure Wi-Fi(or Configure Wireless on first generation Apple TV).
    • Click Select/Play/Pause to display the updated list.
  • If your network is hidden, select Other, and then enter the network name using virtual keyboard and your remote control.
  • Make sure nothing is resting on top of your Apple TV. This may cause interference.
  • Make sure your Apple TV and computer are in range base station.
  • Make sure there are no potential sources of interference.
  • If your wireless base station/router uses Media Access Control (MAC) filtering, make sure the Apple TV MAC address is added to your base station's MAC filter list. To do this, use the documentation that comes with your base station or router. To find your Apple TV's MAC address, go to Settings > General > About.

Note: Apple TV is unable to connect to networks that use character encodings high order or double byte encoding in passwords (including Japanese, Korean and Chinese characters)

Apple TV is unable to connect to a wireless network with a static IP address.

If you are using a static IP address to connect to the Internet, you will need to configure your network before configuring the TCP/IP address.

  • On Apple TV, select Settings > General > Network > Configure Wi-Fi.
  • Select the wireless network you would like to connect to, enter the password, select Done
  • Select TCP/IP > Manually.
  • After that, enter your IP address, network mask ( Subnet Mask), router address and DNS address (DNS Address).

Apple TV won't accept my wireless password

  • Check if your password uses symbols
  • Make sure your wireless network does not use WPA-Enterprise or WPA2-Enterprise encryption.

Apple TV won't play iTunes Store content?

Note: These tips apply to both Apple TV content (first generation) and streaming content launched from iTunes on Apple TV (second and third generation).

  • Make sure your network is not blocking the port
  • Make sure you don't go through

Apple TV (first generation) does not appear in the Devices List, although it is possible to download movie trailers

  • If your computer uses a firewall, make sure it doesn't block . Note: For Mac OS X v10.5 and later firewalls, add the “iTunes” application to the “Set access for specific services and applications” list
  • Make sure your computer's Bonjour features are working correctly. Do you see other Bonjour features, like sharing music from another computer? If you are using Windows, try reinstalling iTunes.
  • Is your computer logged into the VPN connection? Does Bounjour interfere with VPN connections?
  • Make sure your Apple TV and computer running iTunes are on the same subnets.
  • If you use Windows, look for a possible problem with System Service or Startup Item.

Apple TV (1st generation) does not appear in the Devices List and movie trailers cannot be downloaded

  • Make sure you are connected to a wireless network.
  • Make sure your wireless network has Internet access
  • If you are using PPPoE to access the Internet, make sure that the problem is not

Apple TV (1st generation) appears in the Devices List, but there is no possibility of synchronization and streaming

  • Make sure your firewall is not blocking the port.

Note: Mac OS X v10.5 and higher firewall users should add the “iTunes” application to the “Set access for specific services and applications” list.

Additional Information:

If the above information does not solve your problem, try restarting your base station or router and Apple device TV

  • Restart your base station or router. For some models, you just need to turn off the router for a few seconds and then turn it on again. However, check the device documentation.
  • For Apple relaunch TV press and hold Menu and Menu down/scroll (-) about six seconds and then select Restart from the menu.

If the problem still occurs, then return to factory settings

  • Reset your base station/router. As always, please refer to the documentation that came with your device.
  • To reset Apple TV settings follow

If your case is not included in this FAQ, feel free to ask questions in the comments, we will try to solve the problems together.

So, let's immediately define what Apple TV is and why is it needed?

Let's assume a classic set of home appliances - a TV, a computer (preferably a Mac, but a PC is also possible) and an iPhone/iPad. And of course, there is WiFi at home (it is better to use an access point with 802.11n - this way the speed will be higher and the delays will be minimal), through which all home devices are connected to the same network and access the Internet. So, Apple TV can receive a signal from computers, iGadgets and broadcast the image to a connected TV. It sounds great, and in practice, when you see it with your own eyes, you are absolutely delighted!

That is, we can transfer to Apple TV iPhone image or Mac - desktop with icons, game, browser, basically everything! The function is responsible for this, but it has some limitations (more on that later). In addition to broadcasting pictures to a TV, Apple TV can also be used as an independent device - watch online movies and listen to music from iTunes Music Store. After all, everything that you once bought with your account(Apple ID), can also be viewed on Apple TV. Of course, you can buy movies and music directly from the set-top box, but entering a password is not always convenient...

Photos from the photo stream and videos from iMovie Theater can also be streamed to the set-top box, but to be honest, I didn’t bother with it and haven’t used these functions yet. Although no, I’m lying, I looked at the photos from iCloud :)

It seems that now it’s clear why Apple TV is needed, now let’s look at setting it up.

Setting up Apple TV

WITH Apple settings TV, everything is quite simple - connect the HDMI cable to the TV, and the power cable to the outlet - that's it, you're done! 🙂 After turning on the set-top box, a welcome window will appear and you can make small settings for the set-top box. I strongly recommend reaching the point WiFi settings, connect to the network, and then turn on the iPhone/iPad with installed program(from Apple itself), and with the help of it, finish setting up the set-top box. Believe me, entering your Apple ID and password can be very difficult from your native remote control, but typing on the iPhone/iPad keyboard is a pleasure!

After the Apple TV is activated and connected to the network, you can already use it and transfer pictures to it from your iPhone or Mac. Here there is a small limitation that I mentioned above () - you need a Mac no older than 2011, Apple TV 2 or 3, as well as an iPhone 4S and higher. If your iOS device meet these requirements, then it will be possible to enable AirPlay mode by swiping your finger across the screen from bottom to top. Try it and you will see the picture from the device on your TV! 🙂

As for Mac, there is a peculiarity here - if your Mac officially supports AirPlay Mirroring, then there will be no problems, and Mac will appear AirPlay icon in the menu bar next to the clock. But if it is older than 2011, then you will need to use third party applications, like AirParrot or Beamer. This is exactly the problem I encountered, because I have MacBook Pro 15 2010…

AirParrot and Beamer

Using these applications, you can transfer a picture from a Mac (or PC) to an Apple TV. AirParrot is essentially an AirPlay clone, only with more settings.

If you are excited about the idea, then first you need to buy it (about $10), download it and run it. When you launch the program, it will appear in the menu bar, where you can click on Apple TV and the picture will immediately appear on the TV screen.

AirParrot on Mac

In addition to transmitting pictures, AirParrot can also transmit sound - to do this, click on Enable Audio. The first time the program complains that it’s not the required driver- no problem - the program will install everything itself, but this will require a restart of the computer. And twice: after the first reboot, the sound still won’t appear and the program will again ask you to install the driver and restart the Mac. And after that, everything will work :) You can transfer either the entire screen or just one window to Apple TV. For example, you watch a movie on TV and work in a browser on your computer.


2024 gtavrl.ru.