Xiaomi mi5 firmware for global version. Xiaomi Mi5: installing the latest version of Russian firmware

Facebook

Which is aimed at the international market. The peculiarity of this smartphone is that it was created using the Google Android One program. Thus, Xiaomi Mi A1 runs on pure Android 7.1.2, which should be updated to Android 8 by the end of the year. At the same time, this smartphone has a twin brother, both technically and externally, but it runs on MIUI, Moreover, there is only a Chinese version of this firmware. So many Mi5X owners perceived the release of Mi A1 with great optimism, hoping to get their hands on its firmware.

Not long ago we wrote that Mi5X owners who tried to install the firmware from the Mi A1 smartphone “bricked” their devices. This is due to the fact that the Mi A1 uses the same dual system partition design as the Google Pixel smartphones.

But our world is not without smart people. There was a craftsman with the nickname heli0us, who managed to port the firmware from Mi A1 to Mi5X. True, the firmware turned out to be modified and will not receive OTA updates.

How to flash Xiaomi Mi5X on pure Android?

First of all, you will have to unlock the bootloader of your smartphone. You can read how to do this at. Then you need to install custom TWRP recovery, which you can download from the link. After that, download the archive with the firmware to your phone and reboot into TWRP recovery. You need to clean it (wipe data/factory reset) and then install the downloaded firmware. Now reboot into the system and enjoy pure Android.

The Chinese gadget manufacturer Xiaomi has always been famous for its devices, which were in no way inferior in capabilities to their competitors, but at the same time cost two or even three times less. The hero of our article today, Xiaomi Mi 5, is an affordable flagship; at the time of release it cost only about $300, which is not at all a lot for flagship characteristics: Snapdragon 820, 3/4 GB RAM, NFC and everything like that. Now this smartphone is popular in the secondary market and there you can pick it up for very little money. But when buying a smartphone secondhand, you can buy a device with absolutely any incomprehensible firmware. And what to do in this case? The answer is simple - flash it. How to flash Xiaomi Mi 5? Now you will find out.

Xiaomi Mi 5 firmware on MIUI

First, it’s worth understanding a couple of basic points: you do all the manipulations at your own peril and risk, and the device’s firmware will be flashed only after the bootloader has been officially unlocked, because it’s safer and less likely to get bricked.

Let's start with unlocking the bootloader, because without it you can't normally use the XiaoMiFlash utility, which we will use to flash our smartphone with the latest version of MIUI. The process of unlocking the bootloader COMPLETELY DELETES ALL DATA ON THE DEVICE.

Unlocking the bootloader

Launch Mi Flash Unlock and log in through your account. We connect our smartphone in fastboot mode (in the off state we hold down power button And volume down) and we see that the phone has booted into the mode we need.

The program will automatically recognize your smartphone and offer unlocking. Press the “Unlock” button and the program will begin the process of unlocking the bootloader. Afterwards it will display a message about successful unlocking, writing the message “Unlocked successfully”.

Yes, this process takes a long time, but by doing everything this way, you avoid possible problems with subsequent firmware updates or problems with poor performance of some applications. Again: I highly recommend using the official bootloader unlocking methods.

Installing MIUI

First we need to download the firmware we need. To do this, go to the MIUI forum and select the firmware we need there (link to firmware for xiaomi mi 5). Download the required firmware and unzip it into the root folder of drive “C” (you can also go to another one, but be careful about the length of the address). It is advisable to use WinRar to extract the firmware. So, we have extracted the firmware, now we need to download the utility for flashing the firmware of the smartphone itself, we will use Mi Flash, download it from this link and install it. I note that the necessary drivers will be installed along with the program, so you don’t have to worry about drivers.

Turn off the smartphone and put it into fastboot mode (press and hold the “power” and “volume -” buttons). FASTBOOT will appear on the phone screen. We connect the phone to the computer.
You need to copy the address to the extracted firmware; to do this, find the folder with the firmware in Explorer and copy the address, as shown in the picture.

Launch MiFlash. Now you need to paste the copied address into the program’s address bar (highlighted in blue) and click on the update button (highlighted in yellow). The program will automatically detect your smartphone and it will appear in the list of devices. To start the firmware, you need to click on the “flash” button (highlighted in red) and wait for the firmware to complete.

Usually the firmware takes no more than five minutes. Immediately after the firmware is completed, the phone will automatically boot into the system. If this does not happen, then hold down the power button until the Mi logo appears.

Installing custom firmware

On Xiaomi Mi 5, custom firmware is extremely popular, and their number is simply difficult to count. The process of installing such firmware is fundamentally different from installing the official MIUI, so we’ll figure it out. The method described below requires unlocked bootloader.

Download the firmware you need (usually they come in a .zip archive, you don’t need to unzip it) and copy it to the smartphone’s memory.
We will flash it via TWRP, so you also need to download it (official website) and then install it on the device (see point 3). We also download the adb driver and extract it to drive “C”; you need to copy the downloaded recovery file (.img format) to the folder with adb.
We connect the phone in fastboot mode to the computer. To install recovery on your phone, you need to run the command fastboot flash recovery twrp.img, where twrp.img is the name of the recovery file. The recovery is installed and now we boot into it: hold down the “power” and “volume +” buttons.
Now in recovery you need to do Wipe data, factory reset. Go to the cleaning menu and select Data, Cache and Dalvik Cache, swipe to confirm. Now in the main menu go to the “Installation” section and select the previously copied firmware there, confirm the installation and wait for completion. If you need Google Apps, you can download them from the Opengapps website, choose exactly the package that you need (nano or mini is recommended). You install Google services in the same way as the firmware, but you don’t need to do wipes.
After all operations, reboot the smartphone and wait for the first boot, which can last up to 15 minutes.

That's all, the Xiaomi Mi 5 firmware is finished. Now you know how to flash your device, I hope everything went smoothly and without problems.

Xiaomi mobile phones are good, no matter how you look at them - they have performance, stylish appearance and an affordable price. One thing is not encouraging: if you get your hands on a Chinese version of a smartphone, you need to immediately worry about installing new firmware. Even if the manufacturer accompanies the device with the Global firmware version by default, the translation into Russian is poorly done. Therefore, to make your life easier, immediately install the Russian version of the firmware, leaving Global. Even if global firmware comes with a factory warranty, if you change it to custom firmware you may lose your warranty rights. With a competent approach to choosing software, this will not become a problem.

Today we will look at the example of Xiaomi Mi 5S, how the phone’s firmware is changed. The procedure is not very complicated, so you can reflash Xiaomi Mi5 yourself. The main thing is to strictly follow the recommendations given below.

We will install the firmware on Xiaomi Mi5 via a computer or laptop. First you need to download all the necessary programs onto it.

– allows you to directly install new software on your Xiaomi Mi5 gadget. All necessary drivers will be installed immediately along with the program.
Mi PC Suite and Android Studio guarantee that the computer correctly recognizes the phone in the system and runs it normally in EDL mode.
Download the firmware from the official website.
For Xiaomi Mi5 here - http://en.miui.com/download-299.html, for Mi5s here - http://en.miui.com/download-314.html.
We download the stable Global version.

All these files are downloaded, as a rule, from archives. Once the download is complete, unzip them. It is best to leave the files on drive C, but the most important thing is that the path to them should not contain Russian letters or spaces.

If you are working with an OS from Windows 8 and higher, then you need to disable the driver digital signature verification function. Even if you do this, when launching drivers and Mi Flash, the system may warn you about working with drivers from unknown sources. This is normal, always agree to allow the installation to continue.

Give gifts

Preparing your phone

We can flash the phone in EDL mode, into which the device must be switched. But first you will have to obtain developer rights in order to make changes to the system. To do this, go to the settings, see the “About phone” category, and then click on the “Miui Version” column 5 times.

Next, you can enable USB debugging. We return to the settings, find the item “Advanced” - “For Developers”. We activate this mode and the “USB Debugging” item.

Putting Xiaomi into Fastboot mode

Turn off your phone.
Press the screen unlock and volume down buttons until you see a bunny on the Xiaomi Mi 5S monitor.
In this form, Xiaomi Mi5 can already be connected to a computer via a USB cable.

Switching to EDL mode

On the computer, in the command line, you need to enter the command fastboot devices. This will allow you to check the connected device. If everything is in order and there is no need to additionally install any drivers (the system should detect them itself), then enter the fastboot oem edl command, activating the mode we need.

How to install firmware

When we have completed all the preparatory steps, all that remains is to find out how to flash Xiaomi and change the Global software to custom. We do the following:

Launch the pre-installed MiFlash program.
Click on the Refresh button so that the program recognizes the phone connected via cable.
Using the Browse button we indicate the path to the new firmware.
Click on Flash All and wait until the firmware is installed. This takes about three minutes.

Turning on your smartphone

You need to know not only how to update the system, but also how to turn on and configure the phone after that. This is done like this:

Disconnect the phone from USB.
Press the lock button until we feel the phone vibrate. You can let go when you see the Xiaomi logo on the screen.
The updated system launches within 5-10 minutes. There is no need to be afraid, because all folders have been updated, including the root.

After this, you can start setting up your phone from scratch! So don’t give up ordering Xiaomi smartphones through China. Installing Global firmware on them should not be confusing - just flash the device yourself, and the problem will be solved!

Complete instructions for flashing a Xiaomi Mi5 / 5 Pro smartphone to a new official or custom firmware (new version of Android), unlocking the phone, installing a custom TWRP recovery, obtaining Root superuser rights.

Buyers who chose the Xiaomi Mi5 / 5 Pro smartphone and encountered some difficulties in localizing the device, and are wondering how to reflash the smartphone? This instruction is especially for you; I will try to present everything point by point and in an understandable form.

Usually, when buying a smartphone on Ali, you may have some problems with the firmware that the Chinese sellers installed specially for the Russian buyer (such firmware is called “Chinese Samopal”), usually such phones have many bugs, extremely unstable operation and crooked localization (a hodgepodge of Russian , English and Chinese).
A nuance that can come out when flashing the firmware is that with a 99.9% probability, your Xiaomi Mi5 has a locked bootloader, which means that without unlocking you will only be able to install official firmware in English and Chinese.

Official firmware Xiaomi Mi5/5 Pro

Download any official MIUI ROM for Xiaomi Mi5/5 Pro
Connect the device to the computer and copy the firmware file to the smartphone’s memory in the ‘downloaded_rom’ folder.
Launch the Updater app on your phone
Click on the ‘...’ icon in the upper right corner of the screen, select “Select update package’, and select the previously downloaded firmware file that you copied to the downloaded_rom folder

After selecting which, the smartphone will begin updating the firmware. Once the firmware installation is complete, the smartphone will reboot itself.

Unlocking Xiaomi Mi5/5 Pro bootloader and flashing localized or custom firmware

How to find out if the bootloader is locked on Xiaomi Mi5 / 5 Pro?

If you receive the response Device unlocked: true feel free to continue further.

Installing custom TWRP recovery and root + SuperSU on Xiaomi Mi5/5 Pro

If you have reached this point, then all drivers and ADB must be installed on your computer, if not, then download and install from the links above.
Next we will need SPMO custom recovery, download twrp recovery xiaomi mi5 suitable for miui 7 and miui 8
Download SuperSU for Xiaomi Mi5/5 Pro
In the smartphone settings, turn on “USB debugging” (tap “build number” 7 times, the “for developers” menu will appear and the switch is on there)
We place the downloaded TWRP in the folder with ADB, renaming it “recovery.img” The ADB folder should look like this or something like this
Now go to the folder with ADB and open the terminal by pressing and holding the shift key, and right-click anywhere in this folder, and in the menu “open command prompt window”
Then we connect the phone to the computer and reboot the device into fastboot mode, with the phone turned off, pressing the “Power + Volume Down” button simultaneously. A hare and the inscription fastboot will appear on the body screen.
We check the connection between the phone and the computer; to do this, enter the command fastboot devices in the terminal and press enter.

If everything is so, let's sew. To do this, enter the command fastboot flash recovery recovery.img in the terminal and press enter. The window should look like this

That's it, TWRP is flashed. During initial boot, the phone may not be able to log into TWRP using the buttons. Exit – enter the command in the terminal – fastboot boot recovery.img press enter and the phone will reboot into TWRP, or try holding down the power + volume up buttons and release when the “Mi” icon appears.

Select a language in TWRP recovery that you understand. If it asks for a password, click cancel. Further, the “date” section is locked and is not mounted in TWRP recovery, so if there are firmware files or something else on the body, TWRP recovery simply will not see them. To check this, go to mount in TRVP and check the data box. If the checkbox is checked, go to the recovery section, find the sdcard, open it, if you see your folders and files (I didn’t see it), then there is no need to format the data. Copy the “supersu” application to your smartphone’s memory and install it.

In TWRP recovery, go to the Wipe section and click “format data” and in the window that opens “yes”
After all these procedures, in order to avoid bugs, many advise rebooting TWRP. To do this, go to the main recovery screen and click reboot, then click reboot in Recovery. You will restart in recovery.

Installing custom firmware on Xiaomi mi5 / 5 Pro via TWRP recovery

First you need to download the firmware for Xiaomi mi5 / 5 Pro under TWRP in .zip format, for example:

Official multi-language firmware – Global Stable V8.1.2.0

We boot into TWRP (with the phone turned off, hold down the power and volume + buttons at the same time. When the Mi logo appears, release the buttons and wait for it to load into TWRP). In TWRP recovery mode, we connect the Xiaomi mi5 phone to the PC, it should see it, we upload the previously downloaded firmware for TWRP onto it.

Next is the “Install” button, and indicate the path to the firmware in .zip format (must be in the /sdcard directory, this is the internal storage of the phone) and swipe to confirm the start of the installation. Usually the installation lasts 3 – 4 minutes, sometimes it can take up to 10 (depending on the firmware).

At the end of the installation, if everything was successful, two buttons will appear. First click on “Wipe cache/dalvik”, then on “download to system”, and wait. The initial download can take 5 – 10 minutes.

In most cases, TWRP firmware already has root and SuperSU installed. We check, if not, then flash it via TWRP zip SuperSU

Installing firmware on Xiaomi mi5/5 pro via fastboot

If you have an unlocked bootloader, unlike devices with a locked bootloader, the firmware is flashed in fastboot mode, not EDL.

Download the necessary firmware for fastboot (not to be confused with firmware for recovery!) and unzip it.

The article contains instructions for flashing Xiaomi Mi5 firmware.

Important! The information is posted for informational purposes; the author and administration of the resource are not responsible for damage to the phone due to misunderstanding. Please write about any inaccuracies and errors in the comments.

MI5 firmware with closed bootloader

Method 1: Built-in Update section

The standard option for installing updates on all Xiaomi smartphones with MIUI. Suitable only for installing factory firmware. Does not damage the device in case of an incorrectly selected system. You must be connected to the Internet and log in to your account for verification. See detailed installation process.

Method 2: install xiaomieu amateur version

You need to download and install the miflash utility.

Instructions:

Download and unzip the archive with firmware for Mi5.

Move the folder to the root of any local drive.

Enable USB debugging on your smartphone.

Start EDL mode. To do this, the turned on device should be connected to the computer, at the same time open the command window and check for a connection - adb devices. If the connection is successful, then enter – adb reboot edl.

If you are unable to start the download mode, switch the device to fastboot mode. Connect to your PC and enter – fastboot devices in the command window.

After the answer - fastboot oem edl.

If a COM port is assigned to your device in MiFlash, select the firmware using the “select” button. Also select the “Clean all” option for complete cleaning, and then proceed with the installation.

If an error occurs during the process, you should check the MiFlash version. Remember, only modern builds are supported. The drivers may also be incorrect or incomplete.

After the installation is successfully completed, you will need to manually turn on the phone. It will take time to install applications, usually up to 10-15 minutes. Subsequent launches will take place as usual.

MI5 firmware with open bootloader

Method 1: installing factory firmware via MiFlash

The installation process is identical to the described method. Only firmware is flashed via fastboot. You just need to make sure that the device is connected correctly. To do this, enter in the command window – fastboot devices.

Once the installation is complete, the smartphone will start automatically and begin unpacking applications, which will take some time. During this time, put your phone aside. Subsequent launches will be shorter.

Installing TWRP, obtaining ROOT rights

Please save your personal information first, as during the process, all data will be deleted.