Windows 10 creators update and pirated version. Windows Update shows error message
Microsoft once provided Windows 7 and 8.1 users with the opportunity to upgrade to Windows 10 for free. This opportunity was closed at the end of July 2016 after the release Anniversary Update, and with the release of the Creators Update it appeared again. In order to activate Windows 10, you will need a Windows 7 or Windows 8.1 activation key. You can enter it by going to Settings > Update & Security > Activation.
Similarly, it was possible to activate Windows 10 from October 2015 after upgrading from previous versions of Windows. A new version Windows activated license key, which was included with the boxed version of previous versions operating system or provided by the computer manufacturer. Windows 10 does not have such a key; activation is tied to the user account and a specific set of equipment.
Windows 10 Creators Update does not automatically pick up the activation key from previous versions of Windows, so a clean installation using an ISO file, disk, or flash drive is required. If you don't have Windows key 7 or Windows 8.1, it can be purchased for little money, it costs much less than direct Windows activation 10.
Install the Windows 10 Creators Update now; you don't have to wait until April 11 for the official release of this update. To do this, download the “Program Windows installations", run it and perform a clean installation. You can also create installation media using this utility or download an ISO image from the Microsoft website. Clean installation does not allow you to save applications, settings and user files.
For users of activated Windows versions 10, no need to worry - the Creators Update is free for them and will automatically install through Windows Update on April 11. You won't have to pay for the update.
Update with release Windows builds 10 to Creators Update is absolutely painless, it leaves all the data and does not mess up your computer settings. You can check out what's new with the Windows 10 Creators Update on our website.
Microsoft has previously provided unofficial, but completely legal, opportunities to activate Windows 10 for free or at minimal cost. This likely allows it to increase the number of users of the new operating system and at the same time generate income from those who buy licenses.
The innovations of which we discussed in the previous article on the site, Microsoft began to implement right on the day of its official release- 10/17/2017, from 8 pm Moscow time. However, not everyone will see it in the Update Center yet. It will be distributed in stages, and the first to receive it will be owners of more than modern computers. Moreover, in automatic mode, unless, of course, updates were disabled or delayed. In general, guys, in the best scenario for receiving Fall Creators Update doesn't need to do anything. But, alas, the best scenario will not take place in every case. Like, for example, in this one.
This computer was included in the priority list for delivery of the update on the very first day of its release, but the Fall Creators Update (also known as build 1709) did not want to be installed. What should I do to still get the update? And in a case such as this, and when a PC or laptop is not among the priority devices.
Microsoft takes the position that there is no need to rush to update, and if it does not appear in the first days, then you just need to wait your turn until everything appears in the Update Center. But we will not adhere to this position and will implement the Fall Creators Update at all costs. And below we will look at 3 ways to do this.
Note: friends, in my tested cases the update was relatively successful. Among the bugs, the only bug was Alice flying off ( voice assistant from Yandex). I solved this problem by reinstalling the program. However, as practice shows, as a result of implementing crude updates, you can encounter much more serious problems. Therefore, I strongly recommend that before the steps outlined below, you create a point or backup copy to be able to roll back the system.
Method number 1. Update centre
So, the easiest way is to go to the Update Center and run the scan.
If this does not happen, but the system attempts to download build 1709, remember what we did with the Update Center - did we change the terms of delivery of updates? Let's look at the additional parameters.
And we check that the default values are set.
As a result of downloading the Fall Creators Update components, we will see in the tray system notification, which will contain options for our further actions.
Among these options is the ability to postpone the process of directly implementing the update for a specific day or for an indefinite time with a reminder. To immediately begin implementing the update, click, respectively, “Restart now”.
And wait for the computer to update.
If the build 1709 component package is not yet available in the Update Center, follow any of the instructions below.
Method number 2. MediaCreationTool utility
If problems occur with Update, Windows 10 can always be updated using Media utilities CreationTool. Download it from the Microsoft website:
https://www.microsoft.com/ru-ru/software-download/windows10
Let's launch. We agree with the license and select the first update item.
For some time we will observe the progress of the operation in such a full-screen window.
And then the system, as in the previous case, will enter the pre-boot mode for installing updates with an indication of progress. Then it will start up updated.
Method No. 3. System ISO image
Friends, both the first and second methods have one drawback. After such an update, the “ESD” folder appears on the disk (C:\) - a folder for storing temporary Windows installation files, which can weigh several GB. After a while, it usually empties itself and does not pile up the total disk space (C:\) with its weight. However, the fact that before implementing updates into the system, components were downloaded to a folder on the disk (C:\) to carry out this process may not please owners of SSD drives who are sensitive to the resource usage of the media. For those there is alternative way implementation of the Fall Creators Update, it does not perform unnecessary data overwriting. This method is in many ways similar to the previous one, but allows users to choose the storage path themselves. Windows distribution and indicate for these purposes HDD partition. Below we will download an ISO image with the latest Windows 10 distribution and update the system using it.
On April 11, Microsoft opened the Windows 10 Creators Update to more than 400 million Windows users- after all, the biggest this moment update.
Our impressions so far: While Microsoft has done a good job and many users have been able to update their systems without any problems, the devil is again in the details. We will tell you how not to fray your nerves when installing this update and then work with it safely.
Preparing for the Creators Update
This most important advice applies to all major Windows 10 updates: do not rush headlong into this event, but first carry out preparatory measures.
In theory, even a child can handle installing the Creators Update (we talked about the most interesting innovations in this update in the article “”), but if problems suddenly arise during it, you may find yourself with a permanently damaged system. Thus, be patient for some more time and improve your existing Windows first.
1 Check the existing Windows
You should start migrating to the Creators Update only if your installed system doesn't deliver special problems– you wouldn’t run a marathon while lying in bed with the flu. When " blue screen"and other difficulties with Windows rule one thing: solve the main problems first and only then take on the Creators Update. To do this, you can simply run a scan, which will tell you about the state of your system in a minute.
Open the Run window using the Win+R keys. In it, enter the command “perfmon /report”, Windows will handle the rest on its own. As a result, you will find out what the actual problems of the operating system are. Review the report and update your drivers through Device Manager. In Software Administrator, view all installed programs.
2 Making room for the Creators Update
The Creators Update download file weighs from 3.1 to 4.1 GB, depending on the version. However, we are not yet talking about the space that will require updating. Launching Creators Update is carried out as a system installation. The installer first moves the existing system, then installs the upgrade, and only then returns the previously archived data.
Thus, the disk space will be occupied in the same amount as when installing a fresh Windows 10. For the 32-bit version you will need 16 GB of disk space, for the 64-bit Microsoft requires at least 20 GB. To clear up such space, you will most likely need to use Windows Disk Cleanup or additional utility, For example, CCleaner.
If deleting temporary files does not help, you will have to get rid of the data in another way. Forgotten files prefer to accumulate in the Downloads folder, as well as in music, photo and video collections.
3 Making backups
Once your Windows is in order and you've freed up enough disk space for the Creators Update, it's time to make your backups. Yes, you read that right, it is recommended to create several copies. First, record a complete image of the entire system, allowing you to restore it in case of problems.
They will cope with this task perfectly special programs, including free Macrium Reflect Free . Paid version This utility is also capable of archiving files, but you can turn to free software, for example, Personal Backup. The meaning of actions: first backup copy saves your system, the second - important information user.
4 Preparing drivers
Most installation problems major updates Windows is associated with faulty drivers. They can cause minor difficulties, such as problems with sound settings, or they can crash the entire system in the case of corrupted drivers network card or incompatibility of video card drivers.
What are the minimum measures that should be taken? Keep a second computer ready, through which you can download drivers and utilities in an emergency.
5 Remove antiviruses and system utilities
When updating Windows, conflicts with system utilities often arise. This can happen with third-party antiviruses, tuning programs, encryption tools, and anything that penetrates deep into Windows.
Is it really necessary to get rid of all these programs? Yes, if you want to be sure. In any case, the mandatory program includes removing encryption tools hard drives. But also with others special options, such as systems with double loading Windows with Linux, you should assume that the Creators Update will not cope with the configuration.
Exotic situations include transferred user folders. Before updating, they should be returned to the “C:” drive.
Privacy in Creators Update
Microsoft has backed down and strengthened your privacy with the Creators Update. There is still a long way to go to ideal, but progress compared to previous versions on the face.
> During installation You will no longer see the familiar Express settings. Instead, Windows will display the main points along with their explanations. Disable these features as much as possible.
> Already configured parameters privacy Creators update Update accepts them and does not return them to default values. But be careful: new Windows settings 10, as before, is activated by default.
> To control parameters privacy settings in “Settings”, go to the “Privacy” category.
> O&O ShutUp10 – free program, which will give you a shortcut to your privacy settings. Apply the suggested setting with a mouse click and restart Windows 10.
Troubleshooting Creators Update issues
Now you are ready for the Creators Update. But in case any problems arise, we have solutions to the most common problems ready.
1 Windows Update doesn't work
There are many ways to get the Windows 10 Creators Update, but the easiest is through the built-in Windows Update. However, this often causes the most annoying problem of all updates - the Creators Update does not appear in it. By according to Microsoft, there are currently more than 400 million devices eligible for the Creators Update.
But, even with the giant server capacities of the corporation, the process cannot be completed in one day. Therefore, Microsoft is rolling out the Creators Update gradually. It is quite possible that you have not been lucky yet and your turn has not yet arrived. For those who don't want to wait, Windows 10 Update Wizards are available.
You can download them directly from site or in Windows Update, click on the nondescript line “Yes, show me how to do this” (Fig. 1a). The wizard will check the version installed Windows, will analyze the equipment, and then background will download the Creators Update (Figure 1b). After additional verification of the download, you can proceed with the installation.
2 Windows Update shows an error message
If Update spits out an error message, you can download problem solver, which will automatically try to fix problems. After using this utility, you will need to restart your computer. Open Update Center again and let it find Creators Update.
3 Decoding error codes
Installing Windows looks pretty simple, but under the hood it's much more complicated. The difficulty begins when Windows interrupts the process, displaying cryptic error codes such as 0x80070070 – 0x50011. Of course, you can Google these codes and find out that our example means a flaw free space for update.
But free utility Windows Error Lookup will make this task easier. Enter the error code and the program will translate it into a clear reason. However, since the utility is already quite old, it may not be able to handle some codes.
4 Removing external media
Difficulties can gradually increase, even driver problems can interrupt the installation of the Creators Update. They will also be indicated by encrypted error messages, including code 0xC1900101 - 0x20004. In this case, it is a good idea to disconnect any connected devices that are not needed for the update, such as a printer or external drive.
Additionally, in the Task Manager, look for problems with drivers and any strange devices. Also, check the status of your system data by running “sfc /scannow” in the command prompt. 
5 Uninstalling antivirus
Antivirus Windows protection 10 is needed, but when installing the Creators Update, it causes errors under certain circumstances. In this case, the system may issue error code 0x800F0923. It indicates an incompatible driver or problematic system program.
Our advice: if you have an antivirus third party developer, please remove it before updating. Install Creators Update and then install protection again. Since antivirus often penetrates deeply into the system, you need to check with your supplier to see if you need a special utility that removes their product without leaving a trace.
6 Windows 10 is not activated
Windows 10 worked well and, of course, was activated. Then the Creators Update arrived and suddenly Windows decided you needed to register it again.
The easiest way to resolve this issue is to use the built-in troubleshooter. To do this, in “Settings”, click on “Update and Security” and go to “Activation”. Here at the bottom, select Troubleshoot. Now Windows should take care of activation itself.
7 Reinstallation instead of updating
If the Windows Update Wizard did not do its job, you can try using another utility from Microsoft. Download Media Creation Tool from official Microsoft website. It offers a whole range of options for working with the Creators Update.
With its help you will launch the update, download the full ISO file, create bootable usb drive to reinstall the system and even an installation DVD. If you have problems with the update, the first solution may be a bootable USB drive.
8 Devices stopped working
After Creators installations Update can fray your nerves due to missing or damaged drivers. DVB-T2 tuners, webcams, Wi-Fi adapters and other devices may stop working.
9 Last resort: backup or reset
Due to a huge amount different configurations, it may happen that Creators Update simply won’t work for you. In this case, you can always return to previous version. A backup copy created in advance is available to you at any time.
This can also be done through “Options | Update and security." Go to the "Restore" item and under the "Rollback to an earlier build" option, click on the "Start" button. Thus, even the Creators Update can be rolled back own funds Windows. Please note, however, that the built-in reset feature is only available for 10 days after the update.
Creators Update: first steps
After final installation Creators Update needs to take priority actions:
> System check: Using the Win+R keys, open the Run window and enter the command “perfmon /report”. Windows 10 will generate a system status report with an overview of errors.
>Checking drivers: Check the status of your drivers in Device Manager. Ideally, there should be no unfamiliar devices there.
> Installing antivirus:
If, when installing the update, you uninstalled your antivirus and other system utilities, they must be returned.
10 days for rollback: if the Creators Update provoked serious problems, roll back to an earlier version
Photo: manufacturing companies
Creators Update is Last update Windows 10. How to install the update on your computer? What should I do if Windows Update doesn't find it?
The Windows 10 Creators Update can now be installed on your computer. What's new in this version? The Creators Update brings many improvements and innovations to the Microsoft system, ranging from user-friendly interface and the Start menu, introducing new versions system applications(eg Paint 3D) before adding new features such as Game Mode(increases gaming performance) or night mode, which tires the eyes less. In general, the list of innovations is impressive.
Windows 10 Creators Update can be downloaded and installed using Update Center or through the Assistant ( Upgrade Assistant). Below we will look at both of these methods and describe how to use them to update Windows 10. Update the system to Creators Update from using Upgrade Assistant is already available from April 5, 2017. While users who expect automatic downloads via Windows Update will be able to update the system starting April 11, 2017.
Installing Creators Update via Upgrade Assistant (released April 5, 2017)
The first method is to use the Windows 10 Upgrade Assistant. This small program released by Microsoft, which at startup checks for the latest version (compatible with your language, region, and processor architecture) and then allows you to install it.
The benefit of this solution is that you don't have to wait for the Creators Update to appear in Update Center.
To get started, download Upgrade Assistant to your computer:
Launch the program and wait while it checks your operating system and searches for a suitable version.
After some time, information about available updates systems. The screen will display information about the current build, as well as the latest update that is available on the servers Microsoft. Click the "Update Now" button in the lower right corner.
The program will begin the preparation process for installation, download it, and then install it automatically latest version. All your data on your computer will remain untouched.
Installing the Creators Update via Update Center (coming April 11, 2017)
The second method is a traditional update through the built-in Center Windows updates. Here the Creators Update release date is expected from April 11, 2017 and if the mode is enabled in the system automatic download, then it will install itself.
If this does not happen, open the Start menu and go to Settings (gear icon). Then go to the Update and Security section – Windows Update and click on the “Check for updates” button.
If errors occur in the operation of the Center, please read our instructions, in which we discussed various causes of problems and ways to solve them:
If Windows 10 Creators Update doesn't appear in the list available versions on your computer after April 11, you should wait a little longer. In this case, you can speed up this procedure through the Upgrade Assistant (see the first point).
Clean install of Windows 10 with Creators Update
Some users are not interested in installing such large updates and instead prefer to install the system from scratch. This solution really has its advantages, and, by the way, allows you to clean your PC from unnecessary garbage and reduces the risk of problems resulting from the classic update.
You can download official builds of Windows 10 Creators Update at any time using the Media Creation Tool.
Download the utility and then run it. You will be prompted to select further action. Here you can select “Update this PC now,” which provides another option to install the Creators Update.
But, if you want to install Windows 10 from scratch, then select “Create installation media for another computer.”
Then select the media you want to burn to Windows installer 10 Creators Update version 1703 – USB device or ISO image to sign up for DVD disc. The Media Creation Tool will download the latest edition of the installer, which already includes the Creators Update.
When installation disk created, just start the computer from a disk or flash drive and go through all the steps of the installation wizard, formatting system disk C. After installing Windows 10 build 15063, get the latest version with the integrated Creators Update.
After the release of the first major Anniversary update for the “ten”, comparable to SP1 for its predecessors, users were able to get acquainted with such an application as the Windows 10 Upgrade Assistant.
April 2017 was marked by the appearance of the second major update package for Windows 10, comparable to SP2. Let's look at how this utility works and whether it is really as convenient as Microsoft claims.
To get the first major upgrade, follow the following instructions.
1. Go to official page Download the assistant at https://www.microsoft.com/ru-ru/software-download/windows10.
Load tool from third party resources It is highly not recommended - a very high percentage of virus and other malware disguises itself as an update assistant.
2. Click on the “Update now” icon.
3. Wait for the Update Assistant utility to complete downloading.
If you're using Edge, you'll have to confirm to download the executable file.
4. Run the resulting file.
5. In the assistant window, click “Update now” to immediately upgrade to Windows 10 Creators.
As a result, the program will start the process of checking the computer parameters and its condition minimum requirements For Windows works 10. Usually this stage goes smoothly, but problems become:
- lack of a license key;
- lack of free disk space.
Pay attention to these points in advance.
5. If the first attempt was unsuccessful, after correcting the situation, click “Try again.”
Boot process missing files and their installation is started. All user data will be safe and sound, and applications will continue to work as before.
If necessary ( new system didn’t like it or its operation is problematic) Windows 10 can be rolled back at any time. The main thing is that the folder Windows old not changed by the user. The rollback is carried out through the “Update and Security” Options item.
Windows 10 Upgrade Catalog
Due to the functioning of the assistant, a new Windows 10 Upgrade directory appears, what is it? new folder and why it is needed, we will consider in this subsection.
The directory temporarily stores the files necessary to update the operating system, and appears in the root system volume at the time of launching the update assistant or Media Creation Tool (on systems other than “ten”). Folder Windows Upgrade no need for OS after update is successfully completed or aborted. If you think whether you can delete this directory, do it without a doubt, because no one needs it, but only clogs the system volume.
1. Open Win→X using the appropriate combination or right-clicking on Start.
2. From the list, select “Programs and Features”.
3. Find “Windows 10 Creators Update Assistant”.
4. Click on it and click “Delete/Change”.
5. Confirm the action by clicking “Delete”.
As a result, the program will be uninstalled. After this, the Windows10Upgrade directory can be deleted manually through Explorer or file manager, if the folder is not deleted automatically.