Restore Windows 7 system rollback. Running System Restore from Normal and Safe Modes

Twitter

And I already wrote how to create a restore point. Now is the time to write, how to do a system restore in Windows 7, and to put it more simply, now I will write about that how to do a system rollback.

If you have some kind of problem with your computer, for example, it has become very glitchy, or even worse, it won’t start at all, then the first thing you need to do is try to perform a system rollback, thereby we will return the settings and system files from backup copy, which was created, for example, two days ago, when the computer was still working normally.

This good opportunity quickly fix your computer and return it to normal working condition. I will write three ways in which you can rollback in Windows 7.

The first method: how to rollback from Windows.
Second method: how to restore the system from safe mode.
Third method: recovery using a boot disk with Windows 7.

When restoring the system, your personal files will not be affected.

System rollback from Windows 7

This method is useful when the computer turns on and works, it doesn’t matter how it works, the main thing is that it works :). For example, after installing some program or driver, problems appeared with the computer. You uninstalled the program, but the problems remained. In this case, a system rollback should help.

We do this: click “Start” and start writing in the search bar "recovery". Find and run the program in the search results "System Restore".

A window will open in which we click “Next”.

Now you need to select the restore point to which you want to rollback and click “Next”.

Confirming the restore point. Click “Finish”.

One more warning, click “Yes”.

A window will appear asking you to prepare for recovery. Then the computer will restart and a message will appear stating that .

If this does not solve your problem, then try rolling back to another point. This is where we can finish with the first method.

Restoring the system from safe mode

Roll back the settings and system files possible from safe mode, when, for example, Windows does not boot into normal mode. There were cases when this method helped me out a lot.

First, we need to go into safe mode, as I wrote about how to do this in the article. Well, if you missed the link, then I’ll write in a nutshell how to enter the secure Windows mode 7.

Restart your computer and as soon as it starts to turn on, press F8. A black window will appear with additional options downloads. Choose "Safe mode" and press “Enter”.

We wait until the computer boots into safe mode. Next, all the steps are almost the same as restoring from Windows, but I’ll write it again, just in case :).

Click start and enter “recovered...”, launch the utility "System Restore".

Since I just did a system rollback, I now have an option to cancel the restore. Choose “Select a different restore point” and click “Next” (you will probably just need to click next).

Select a point for rollback and click “Next”.

Click on the “Finish” button.

We answer “Yes” to another warning.

The computer will restart and turn on in normal mode. Of course, if rolling back to previous settings helped solve your system boot problem.

Rollback to previous settings using a boot disk

I left this method for dessert, because it will be needed here boot disk with Windows 7. But this method also has its advantages. For example, you can rollback when even safe mode does not work, in short, in the most severe cases :).

As I already wrote, you need a bootable disk with Windows 7, the article explains how to create one. Next you need to go into the BIOS and boot from the installation disk.

The search will begin installed systems. If you have more than one, then select the one you need and click “Next”.

Then select "System Restore". Then the whole process is no different from the first two methods.

Click “Next”.
Select a point for rollback and click “Next” System Restore in Windows 7. How to perform a system rollback? updated: January 15, 2013 by: admin

Developers who have integrated the rollback function windows updates 7 (XP and windows 8 also) I must say a very big thank you.

The ability to roll back Windows updates has saved not only the frustration of many PC owners, but also time and money.

Even installing official updates Microsoft for Windows 7 (and others), you can never be sure that after a reboot the computer/laptop will start in normal operating mode.

If you fail, there is no need to panic. You can always roll back the system (by default, all Windows operating systems create a “save point”).

The most practical way to roll back updates

To roll back the updates, find the “restore” option and click on it.

After that, you will see a button “run system restore” (this is a rollback) - also click.

After a few seconds, a window will pop up - just click “next”.

Now the window will change to another one. At the bottom, check the box next to the line: “show other restore points.”

Select the date when you were completely satisfied with the operation of your PC, click on it (should be highlighted in blue) and click “next” again.

Now you have to do it on your computer or laptop last step– click “Done”.

Remember, there will be no return - the rollback of updates will begin to occur, without the ability to stop.

Roll back updates without restore points

To roll back updates, you don’t have to resort to restore points - you can simply delete them.

To do this, in the Control Panel, click the option “programs and features”. There, on the left side there is a line: “view installed updates» - click.

After this you will see not only what you have installed, but also exact time(on the right side) when it was done.

If you click on any of them, the option “delete” will appear at the top. This way you can get rid of everything that interferes with the performance of your Windows 7 OS.

There is another way to rollback, problem solver 100 percent always, just to be able to use it you need to purchase external hard disk.

Then, pre-record an image of your Windows system when it was in excellent condition. Good luck.

Category: Uncategorized

Has your computer or laptop started to glitch badly? Or does it not turn on at all? First of all, try restoring the Windows 7 system. The operation takes 10-15 minutes, but it can really help. After all, in in this case The Windows 7 system is rolled back to a couple of days ago, when the PC or laptop was still working perfectly.

Windows 7 system recovery: what is it?

What is a Windows 7 rollback? This is an operation during which all settings and system files are restored from a backup created by Windows. That is, if you accidentally deleted important files or changed the settings (for example, installed new driver), and after that the computer starts to slow down (or does not turn on at all), then this can be fixed. By at least, it's worth a try.

Restoring a previous version of Windows is carried out with control points, which are created every week, as well as after making any changes (installing or removing programs). Typically, this feature is enabled automatically. Plus you can create control points manually.

You can read how to check whether this option is enabled on your computer/laptop and how to create new points manually here – How to enable system recovery?

There are at least 3 ways to start Windows 7 recovery:

using Windows;
via safe mode;
using a flash drive with Windows 7.

Let's look at each of them in more detail.

When you roll back Windows 7, all your personal files will remain in place. Therefore, you don’t have to worry about this.

But there is one nuance here. During recovery, files recorded between today and the day to which you decide to roll back may be lost. Therefore, if you recently (today, yesterday, the day before yesterday, etc.) downloaded important documents onto your PC, it is better to save them to a flash drive. Just in case.

How to roll back the system using Windows 7?

The first way to roll back Windows 7 is through the OS itself. But it is only suitable if your PC or laptop turns on. It doesn’t matter if it glitches or freezes, the main thing is that you can load the desktop.

So, to start Windows 7 system recovery, do the following:

After this, the Windows 7 system rollback will begin. When the operation is completed, the computer or laptop will reboot and you will see a message that everything was successful.

Restoring Windows 7 startup through safe mode

If your PC or laptop does not turn on at all, then you can try recovery start windows 7 in safe mode. To do this, when turning on (or restarting) the PC, press the F8 key repeatedly until the menu appears. Next, select “Safe Mode” and click Enter.

However, there are some nuances associated with different Windows versions. Therefore, to avoid any difficulties, I recommend that you read – How to log into a secure Windows mode?

You wait until the computer or laptop turns on, and after that you perform all the same steps as in the previous option. That is, to roll back the Windows 7 system, follow steps 1 to 7 described above.

Restoring Windows 7 from a USB flash drive

And the third method: restoring Windows 7 from a flash drive (or disk) with installation files. The disadvantage of this option is that you need to write it to a Windows flash drive, which is on your computer or laptop. And the plus is that in this way you can try to restore the Windows 7 system, even when the PC does not turn on and safe mode does not start. That is, this is your last chance.

In this case, you need to create bootable USB flash drive With installing Windows(you can do this from friends or acquaintances), and then download windows from it. Read more about this here:

How to make a bootable windows flash drive in UltraISO?

How to set boot from flash drive in BIOS?

If you did everything correctly, a window will open with installing windows 7. To restore the Windows system, do the following:

Wait until the procedure is completed and click on “Reboot”. Then immediately remove the flash drive from the connector (or the disk from the drive), after which the PC should turn on in the usual way.

By the way, restoring Windows on a laptop and computer is the same. So you can try any method you choose.

That's all. Now you know how to roll back a Windows 7 system. I hope one of the 3 methods will work and you will be able to restore the functionality of your PC or laptop.

What to do if there are no restore points? You can try one option - restoring the Windows 7 system without restore points.

(1 ratings, average: 5.00 out of 5) Loading...

it-doc.info

How to restore Windows 7 without restore points

A computer system is a complete “organism” that usually works without failures or problems. However, no device is immune from breakdown or malware attack, when the integrity of the system is completely compromised. In such cases, it is important to react in time and try to quickly restore the system. Most often, restore points are used for this purpose, but they must be created in advance. Unfortunately, it’s not always possible to play it safe, so I want to devote this material to the question of how to restore a Windows 7 system if there are no restore points. Moreover, there is far more than one method, and it is better to be familiar with them, otherwise you don’t know when you will have to resort to similar methods.

Recovery using windows

The first option I want to talk about is to restore the system using the operating system itself. I won’t beat around the bush, I’ll get straight to action:

Safe mode

The situation was described above when the computer OS loads and works. But you’re not always so lucky; it happens that it simply doesn’t load. How then? It's very simple: use safe mode! I have already described how this procedure occurs earlier, so I will repeat it in just two words. At the moment when the computer just started to turn on, you need to press the F8 key. If everything goes well, a black window with options for action will appear in front of you, if not, you will see the windows logo, therefore, you need to turn off the computer again and start over.

Go to the “Safe Mode” item and do almost the same thing as described above.

That is, first go to “Restore the system to an earlier state”, then click the “Start system recovery” button. Now select a checkpoint, confirm the recovery of the disks and recovery points, after which the recovery procedure will begin. After this, it would be a good idea to try to increase system performance by getting rid of unnecessary garbage on PC.

I hope my tips helped you!

learnwindows.ru

How to roll back Windows 7 to a restore point?

Hello, dear readers of my blog. In the previous lesson, we learned how to create a restore point, because, as you know, it is recommended to do this every time before installing new programs or updating device drivers. Well, in today’s lesson we will talk about rolling back the Windows 7 system to a previously created checkpoint. To begin with, I want to warn you that you don’t have to worry about the safety of the files contained on your hard drive, because they will not be touched, but the settings you made after last creation checkpoints will be reset. Now let's get started! To roll back Windows 7, open the Start menu, type system restore in the search bar and select “system file recovery.” In the next window, click the “next” button, then select the control point that is the last one and click “next” again.

Now confirm your intention to rollback Windows system, by pressing the “ready” button.

Next, the system will warn you that once the recovery process begins, it cannot be interrupted; click “yes” to continue.

After this, a system rollback will begin, after which the computer will shut down spontaneously, and when it boots again, it will display a notification on the desktop screen about a successful recovery, after which all that remains is to close it.

Now you know how to roll back a Windows 7 system to a checkpoint and if the system fails, you will always know how to fix it. The main thing is not to forget that every time before updating device drivers or downloading some software that is not on the official website of its developer, it is recommended to create a restore point.

That's all for me, if you have any questions regarding today's topic, please contact me. Thank you all for your attention and see you soon.

www.yrokicompa.ru

How to restore windows if there are no restore points?

Computer or laptop malfunctions happen unexpectedly. It seems like everything was working yesterday, but today it doesn’t even turn on. In this case, the easiest way is to roll back the system to a working version.

How to restore Windows if there are no restore points? It’s not for nothing that there is almost nothing on the Internet on this topic. But there is still one opportunity to restore the operation of your PC or laptop. Consider this your last chance.

System Restore without a restore point

How to roll back the system if there are no restore points? Actually, not at all. After all, if these very points are not there, then there is nothing to restore from. Logical? Logical.

But it is still possible to restore the system without a restore point. But not using Windows, but using a special program - LiveCD.

Creating an emergency flash drive

Boot images There are many LiveCDs, so you can use any. For example, Active Boot is considered an excellent option.

When choosing a program, pay attention to its capabilities (what it can do). Do you need to reset your password? Restore by accident deleted files? Scan your computer for viruses? Are you looking for a program that can do this?

To create an emergency flash drive, you need to burn this LiveCD onto it. For example, with using UltraISO.

Read more about this here – Creation bootable flash drive in UltraISO

Typically, to enter the BIOS you need to press the F2 or Del button. Although there may be many options (especially on laptops).

At turning on windows On the first screen you can see a button to enter the BIOS. IN in this example- this is the Del button.

Changing boot priority

The flash drive (USB-HDD) was placed in first place (First Boot Device). Now when you turn on windows, it will load first. The second is the CD-ROM (disk drive).

If you don't know how to do this, you can read detailed instructions– Setting up BIOS to boot from a flash drive

Restoring windows without a restore point

If you did everything correctly, the laptop or PC will boot from the flash drive, after which the LiveCD program will launch. And then do what you started all this for.

That is why you need to choose the right program, as described above. If it knows how to reset a password or scan your PC for viruses, then simply select the appropriate item in the menu and wait until the procedure is completed.

But first of all, it is recommended to copy all important files, documents and photos to a flash drive. Almost all LiveCD programs have an explorer (like Total Commander), with which you can open required folders and copy them to your USB flash drive.

If the reason for the malfunction of your computer or laptop is unknown, then you can try to restore Windows from archival copy registry LiveCD will also help you with this.

To do this, boot from the flash drive and open the RegBack folder. It is located along the path:

windows\System32\config\RegBack

In this case the name local disks will most likely change. For example, local drive C can be renamed to D or E. Be guided by the total size, as well as the folders and files that are located on it. You don't have to look at the letters.

So, to perform a system restore without a restore point, you need:

After this, reboot your PC (or laptop) and boot from HDD drive(to do this, you need to change back the device boot priority in the BIOS).

If the malfunction was related to the registry, this will help fix the problem. After this, Windows will boot and work as before.

This is how you restore Windows 7 without a restore point. There are no other ways (except using special programs). In the future, try to avoid such situations. To do this, configure Windows to automatically create restore points.

Read more about this here – How to enable system restore in windows 7?

(2 ratings, average: 2.50 out of 5) Loading...

it-doc.info

How to create a system restore point and how to roll back windows XP / Vista / 7 / 8

Sometimes a situation arises when it is necessary to quickly undo unwanted changes to the system: for example, after updating software, installing drivers or cleaning the registry, problems with stability began windows work. However, not all users know how to “rollback”, how and when to create rollback points on their own, and in what cases the OS does them in auto mode - in general, I will try to compactly answer all pressing questions on this important topic in this note.

Let's start by checking whether the System Restore service (rstrui.exe process) is running. To do this, through the “Start” button, right-click on “Computer” → then, in the drop-down menu, select “Properties” → “System Protection”. The Security Options area displays the available local disks and the degree of their protection. By default, system recovery is enabled for the drive where the Windows OS is installed (C:). However, you can enable it for any other drive by marking the desired one (for Vista this is all manipulation!) and clicking on the “Configure” button (see the first screenshot in Win7 design). In the window that opens, activate "Restore system settings and previous versions files" and confirm the changes with the "OK" button. In addition, in Windows 7 the ability to manage disk space for system recovery, as it was in XP, but for some reason it was “forgotten” in Vista (see screenshot below).

When does Windows itself (automatically) create restore points?

This happens in the following cases:

when installing programs and drivers;
when installing OS updates via the Internet;
according to schedule (every 24 hours in Windows Vista and every 7 days in the "seven");
when the system is rolled back to one of the earlier restore points.

Of course, the user can independently create a rollback point (see first screenshot) before any potentially dangerous actions(such as changing system files) according to the “more is not less” principle.

How to perform a system rollback?

All windows restore points are hidden system folder C:\System Volume Information. You can independently “roll back” to the desired point in several ways, for example:

through the "Start" button, click "Help and Support" → "Undo changes using System Restore" → "Restore the computer to an earlier state" and "Next" (for Windows XP);
via "Start", click "Control Panel" → "System Restore" (or "Recovery") → "Run System Restore" → finally select desired point rollback (see screenshot);
via the hotkey combination "WinKey + R" → in the window, enter rstrui → "OK" (the most convenient option for Windows 8).

Some important comments

I quote the help article from the Microsoft website: “System Restore does not protect drives with the FAT32 file system and other file systems FAT, since such drives do not support shadow copies". In XP, when creating a rollback point, only key files system and programs, unlike windows Vista / 7 / 8, where, thanks to the Volume Shadow Copy Service (VSS), changes are recorded throughout the entire partition. In any case, personal files are not included in OS restore points, i.e. all your documents and photos will not disappear after the “rollback”.
When a k.-l. problems with loading and stability of Windows, you should use the latest restore point created shortly before the date and time when the problems began. If the situation, alas, has not changed, you can always choose another (earlier) rollback point.
For beginners computer users I recommend reading my article " Quick creation system restore points: Single Click Restore Point (SCRP) utility." More experienced users who have the Wise Registry Cleaner on their PC are the luckiest, because everything they need to prompt creation They have rollback points and, in fact, “rollback” of windows “at hand”, see details here.

Dmitry dmitry_spb Evdokimov

So, today we will talk to you about how to perform a system rollback in Windows 7. The thing is that modern viruses and Trojans can cause all sorts of malfunctions. Then the computer stops working normally. This is where the need to make “kickbacks” arises. Let's learn how this is done.

If there is no choice

But when is a system rollback necessary for Windows 7? Let's try to figure it out with you in this difficult matter.

To begin with, it is worth understanding that such “things” are not done just like that. You must have good reasons for any manipulations with your operating system. The first option when a user may need a system rollback for Windows 7 is a banal clutter that cannot be fixed normal methods. Moreover, this option It’s only suitable when the computer starts to slow down due to “junk”.

The second reason why you may need to roll back your Windows 7 system is constant crashes and factory resets.

Of course, we cannot ignore such a scenario as introducing a virus or Trojan onto your computer. Sometimes it is rollbacks that help to cope with problems. So, now let's see how to properly prepare and carry out the “operation”.

Preparation

Of course, after you notice that your computer has stopped “obeying” and is constantly slowing down, a completely logical conclusion comes to mind - do a rollback. After all, it returns the computer to the state it was in on the selected date. Very comfortably. True, if you decide to perform such an action, then you should be well prepared. In Windows 7, a system rollback can be performed in several ways, which we will talk about today. But for now we are just getting ready.

You will need to save all your data that is important. Certainly, personal information, as a rule, rollbacks do not affect rollbacks, but in the event of a “failure” during the process, you can “lose” Windows along with all the data. So, it's better to be safe. In addition, it is advisable to scan your computer for viruses. Some Trojans can interfere with the recovery process. So, if you are not afraid, then all that remains is to choose how to roll back the Windows 7 system, and then proceed to action. Let's see what's available for this.

System

Well, the first and most popular method is to restore the operating system using built-in functions. This is very convenient to do in Windows 7. The system rollback will occur quite quickly, however, you will need to enable the function of setting “rollback points” in advance. It is enabled by default.

But how can you roll back the operating system once it has been logged in? To do this you will need a "recovery tool". It can be found in the Start menu. From there, go to "Standard" and then select "Service". Next, all you have to do is click on “recovery tool”. Now let's do a system rollback in Windows 7 together.

After you click on the button, a window will open in front of you that will warn you that the system will inevitably return to the state that you have “installed” now. Just agree with him and move on. Now you need to select a restore point. As a rule, they are done automatically. If there are none, then you are out of luck - if successful, all settings will drop to zero. Click next and wait for the process to finish. During this process, the system may reboot several times. Now you know how to perform a system rollback in Windows 7. But this is only the first option. It's worth talking about others.

Command line

Of course, you can’t escape anywhere without the so-called command line. It is she who will help us implement today’s idea. However, you will need to carry out the process correctly so as not to lose important data.

First of all, you will need to start the system in safe mode. Done? Open Command Prompt (by pressing Win + R), then enter special combination. The command “rstrui.exe” is suitable for performing a system rollback in Windows 7. Now press "Enter". The already familiar “restorer” window will open in front of you. In it, select a rollback point and confirm your actions. Now all that remains is to wait for completion. In Windows 7, system rollback when booting into safe mode is another very popular method that is used system administrators. But there is another option for the development of events. It won't suit everyone. Let's get to know him.

Installation disk

So, the next way you can perform a system rollback in Windows 7 is using the installation disk. If you already have it, then great. No? Then it is better to use one of the already familiar options. After all, the whole problem is that the computer will refuse to work with a disk that is not identical to your OS.

In the case when the user uses a pirated version, especially one he installed himself, there should be no problems. In general, let's assume that we already have a disk. Now you need to set up your computer and get started.

Insert the disk into the drive and go into the BIOS. There you need to set the boot from the DVD-ROM first. Save and restart the computer. Wait until the Windows 7 installer starts to open. You will see the system rollback immediately.

Look at the lower left corner of the window - there will be “recovery” there. In the window that opens, select “System Restore”. Read the information about the irreversibility of the process and click "next". Now you should choose a rollback point. If the computer has been configured correctly, then you will already have at least 2-3 pieces. Have you chosen? Click "next".

In the window that opens, click “Done”. A warning from the series “did you think well?” will pop up. Yes, we had a good time thinking about it! So, feel free to click “yes” and watch how our system will be restored. After this, just click on the “reboot” button. That's all - you know how to rollback using all possible methods.

Doesn't always help

True, very often it turns out that in Windows 7, rolling back the system does not help. Moreover, it can start, and then “stall” in the middle or, even worse, at the very end. And no matter how hard you try, you can’t get the recovery tool to work. What then?

In this situation, the only threat is complete reinstallation"Windows". So, keep a close eye on your computer and make rollback points so that you are prepared in case you need to perform a restore. Good luck!

The bulk of failures and Windows problems 7, to the delight of lovers of experiments, is easy to “treat.” For this purpose, Windows, starting with XP, includes a special tool - “System Restore” or a rollback tool, as some users call it.

To be able to perform a rollback Windows systems 7 to a previously saved state, it is necessary to create checkpoints. This can be done automatically and manual mode. The automatic one is more convenient, since you don’t have to constantly remember this, but the manual one will help out when you need to change something in the system: install or uninstall a program, change the theme, make changes to the registry, etc.

In Windows 7, a system rollback can be done from normal mode, safe mode, or from the Windows RE recovery environment.

How to create checkpoints

Open context menu Computer folder and click Properties

or click the “System” applet in the control panel.

Click the “System Protection” button in the transition bar of the properties window.

On the properties tab of the same name, in “Protection Settings”, select the drive for which you are going to create a checkpoint and click “Configure”.

Next, check “Restore system settings and previous versions of files” and set the amount of disk space to store the backup. This will set you up automatic creation recovery points.
To delete previously created points, in the same window, click on the “Delete” button.

To manually create a checkpoint, on the “System Security” tab, click “Create”. In the next window enter short description and click “Create” again. Current Windows status will be saved.

Running System Restore from Normal and Safe Modes

Open Start >> All Programs >> Accessories >> System Tools. Select “System Restore”.

The same can be done by typing in search bar Start command rstrui and running the file of the same name.

After opening the application, in the “Restore system files and settings” window, click the “Next” button.

The next window will display a list of the one or two most recently created control points. To see more, check the “Show other restore points” checkbox.

Clicking “Search for affected programs” will help you determine whether a rollback will solve the problem existing problem– you can see which applications and drivers will be removed or changed.

Select one of the appropriate control points and click “Next”. To confirm your choice, click “Finish” in the next window – the program will start working. After a few minutes, the registry status and Windows files will return to the saved state.

How to restore the system from Windows RE

This method will help roll back the system when it does not start.

Before Windows start Press the F8 key several times as quickly as possible. Select “Troubleshoot your PC” from the download options.

After entering the user password, go to select recovery options. Select the second item from this list from the top. Then everything is done as described above.

Reverting Windows 7 to the same state as after installation

Function Factory Reset– restore the computer to factory settings, available on most laptops with Windows 7. A copy of the system on them is stored in a special, hidden partition hard drive, where the user does not have access.

Restoring to factory state works differently on different machines. On some for this - special utilities, which allow you to start the rollback process directly from Windows.

On others, the recovery program is launched from Windows environment RE (last item in recovery options).

Thirdly, to roll back the system you need to press one or a certain combination of keys after starting the computer:

on ASUS – F9

on Acer – Alt+F10

on Samsung – F4

on Sony vaio– F10

on Toshiba – F8 or 0 (on latest models)

on Packard Bell– F10

on Fujitsu Siemens – F8

on Dell inspiron– Ctrl+F11

After you run the recovery tool, follow the instructions and monitor its progress. It is important that the laptop battery is fully charged during the rollback in case of power outages. Because turning off the current at this time can irreparably damage the system.

When the restoration is complete, a window will open initial setup Windows 7. There will be nothing left of it previous system– no user accounts, no activation, no user documents, no programs.

After this window appears, you will have the same actions as if you had just installed Windows from scratch.

Complete removal of Windows 7 from your computer

If you are so tired of the “seven” that you decide to remove it, you will need an external bootable media. They may be installation disk with a distribution kit of any operating system, Live CD from a portable Windows version(for example, the BART PE distribution), disks with programs like Acronis Disk Director or another copy of the system running on the same computer.

To remove the system, you need to boot your PC from one of these media and format it hard section disk where Windows files are located.

However, more often there are situations when you need to remove old system after installing a new copy of it into the same partition. If you did not format the partition during the installation process, all files from the previous system will be placed in the Windows.old folder. She is in root directory drive C - in the same place as the newly created Windows folder. Just delete it.

If there are several operating systems, the deleted “seven” may remain in the list of boot options. To remove it from there, start a new one copy of Windows, open the system setup utility Msconfig by entering its name in the Start search bar.

In Msconfig, open the Boot tab. In this tab window there is a list of operating systems that is displayed in the start menu.

Mark in it Windows 7, which is no longer on the disk, and click the “Remove” button. After that she is among available options loading will not be displayed.