Restoring iPhone using iTunes. How to reliably restore iPhone and iPad using and without using iTunes

Restore via iTunes - last resort, which the user undertakes if he cannot fix this or that software iPhone crash. Unfortunately, sometimes this procedure, in turn, is interrupted by an error. What to do if you can’t restore your device through iTunes? In this article we will answer the question.

In general, there are two ways to restore an iPhone by iTunes programs. The first method is “light” - it assumes that your device is still functional, but, for example, it’s a little buggy, and you want to remove all the bugs using recovery. In this case, you need to connect your iPhone to your PC with installed iTunes, wait until the program recognizes the device (that the gadget has been identified will be signaled by the appearance of an icon in the form of a phone in the main menu of the program), go to the “Browse” section and click the “Restore iPhone” button.

It's very simple, but there are worse situations. For example, you set your iPhone to update, but forgot that the charge was low and it turned off when the update was not completed, and now the smartphone refuses to respond to any actions, including, it will not turn on. Or, for example, you decided to install a program from an unverified source, but there was a virus there, which, again, turned the device into a “brick” that refused to even turn on. In such situations, is there a chance to return the smartphone to a working state?

Don’t be alarmed, there is a way out of this situation - you just need to transfer the device to one of emergency modes — Recovery Mode or DFU. The first is activated through the platform, the second at the hardware level. That is, if Recovery Mode does not respond, DFU will always come to the rescue.

To activate Recovery Mode, press and hold Home button, then, without releasing it, connect the device to the PC with iTunes, when the program icon and the image of the charge cable light up on the smartphone screen, release Home. At the same moment, iTunes will notify you that iPhone detection in recovery mode and will prompt you to start the recovery process.

To put the smartphone into DFU mode, hold down Home+Power, release Power after 10 seconds, connect the iPhone to the computer, and wait for iTunes to signal that the device has been detected in recovery mode (no icons should appear on the screen of the device itself!), after which we release Home and start the procedure.

What to do if iTunes failed to restore iPhone?

Unfortunately, sometimes for some reason reason iTunes The recovery procedure cannot be completed - it is interrupted by an error. Don't worry, this is not the end of the world; most likely, the situation can be easily corrected.

There can be many reasons why iTunes refuses to restore a device, but most often the problem is software in nature.

Therefore, first of all, you need to restart the program and computer, and if your iPhone is not bricked, reset it too. Perhaps after this simple step, everything will work out for you.

Software Update

If rebooting does not help, you need to make sure there are no software conflicts - first of all, check what version of iTunes is installed on your computer; perhaps the program simply needs to be updated. It would also be a good idea to update all other software installed on your PC. You don't even imagine how often outdated programs become the causes of certain failures.

You can update the software on a Windows PC by accessing the center through the Start menu Windows updates, and on Mac you need to go to the “Updates” section of the App Store.

Disabling security programs

Another one common reason software conflicts - too responsible job antivirus programs. Your firewall or antivirus may have listed iTunes as suspicious programs and interfere with her work. To check whether this situation is relevant in your case, disable all security programs during recovery.

Editing the hosts file

And finally, another reason for software failures is errors hosts file. We won’t go into lengthy explanations about what this file is and why it is needed, this is not so important in in this case. You just need to make it correct. How? In this article on the site Apple support you can read how to find and edit a file on a Mac; this article will help you find hosts on Windows, and the editing procedure will be the same as for Mac.

Hardware problems

If you are unlucky and the iPhone is not restored despite the fact that you have carried out all the measures described above, then it is time to suspect a hardware problem. First of all, you need to use a different USB port to iPhone connections. If this does not help, it may be a problem with the connecting cable - please note that in this case you must use either original wire, or marked MFi, which means “Made for iPhone”.

If everything is in order with the cable and ports and software reasons you have ruled it out, but the recovery is still interrupted, perhaps the problem is in the PC or iPhone itself. Try using another computer; if the recovery is interrupted on it too, then it’s time for you to pick up your “apple” and take it to the service center.

Let's summarize

Using iTunes recovery, you can fix certain iPhone glitches, but sometimes it is not restored. Why can't my iPhone be restored via iTunes? There can be many reasons, both software and hardware. If you were unable to fix the problem yourself, we recommend that you first contact Apple support, and if that doesn’t help, take the device to the service center and, hopefully, they can still fix it!

One of key features iOS is its stability, but there are times when users encounter some software problems. However, as practice shows, in most cases it is not at all necessary to carry an Apple gadget for service. Most often, problems can be solved by simply restoring iOS.

Let us immediately note that this material will primarily be useful to those who are just starting to get acquainted with apple products. Therefore, in addition to recovery, we will also mention another process associated with flashing the device - updating.

First you need to understand how recovery differs from update.

— When restoring, users will receive a “clean” device with the most latest version iOS. During the recovery process, photos, videos, music and personal data will be removed from the gadget’s memory, and the device settings will be reset to factory settings.

— When updating, the latest version is installed on the device iOS version, and all data remains intact.

iOS Recovery:

1) Recovery via iTunes

To do this you will need:

1. latest version iTunes applications and install it.

2. file with the latest version of the iOS system (on this moment this is 8.1.3).

3. Disable Find My iPhone on your mobile device.

4. Launch iTunes and connect your iPhone to your computer using a cable.

5. In iTunes, go to the synchronization tab with your mobile device.

6. Clamp Shift key(For Mac computer- Alt) and click on the Restore button.

7. In the window that appears, find and open the file with iOS system.

8. After confirming the restoration, the application itself will perform all the necessary actions.

As mentioned above, when restoring the iPhone, all data, applications and other information will be erased, leaving only a “clean” system.

It is possible to restore without downloading the file with the system. In this case, you just need to click on the “Restore” button in iTunes. The only difference will be that Apple’s media harvester will download the firmware file on its own.

Video instructions for restoring iPhone:

Recovering iOS from DFU Mode and Recovery Mode

Except normal mode Apple gadget may be in DFU Mode or Recovery Mode. The procedure for restoring an iPhone, iPad or iPod Touch from Recovery Mode or Firmware Update Mode (DFU Mode) is practically no different from the method described above. The only thing users need to do before recovery is to switch the gadget to Recovery Mode or DFU Mode.

To switch to Recovery Mode you need:

1. Completely disable the gadget in any available way.

2. Press and hold the “Home” button.

3. Connect iPhone, iPad or iPod Touch. While holding down the Home button, connect your iPhone, iPad, or iPod Touch to your computer using a USB cable.

4. Wait until an image with the iTunes icon and a USB cable appears on the screen.

After this, the gadget will be transferred to Recovery Mode.

To switch to DFU mode you need:

1. Connect the device to the computer.

2. Turn off your iPhone, iPad, or iPod Touch.

3. With the device turned off, simultaneously press the “Home” and “Power” buttons.

4. Keep both buttons pressed for 10 seconds.

5. After 10 seconds, release the “Power” button while continuing to hold the “Home” button pressed.

6. Hold the Home button until the computer recognizes the iPhone in DFU mode.

iOS update

At the moment, there are two main ways to update the firmware:

- Using iTunes.

— Over-the-air update directly from the device.

Update using iTunes

1. Launch iTunes latest version and connect the device to the computer.

2. In iTunes, go to the synchronization tab with your mobile device and click on the “Update” button.

3. Confirm the update process.

If you downloaded the update file in advance, you can specify the path to it using the method suggested earlier (Hold down the Shift key (for a Mac computer - Alt)) and save time on downloading the update.

iOS update over Wi-Fi

Update mobile device possible by wireless network without resorting to iTunes help and without connecting the iPhone to the computer. This opportunity Available for all devices with iOS 5.0 and higher.

The procedure in this case is as follows:

1. B iOS Settings go to Basic.

2. In this tab, select Software Update.

3. Click on the Install button.

4. Confirm the action and wait for the installation to complete.

Both update methods are equivalent in terms of the final result are no different. No settings, data, applications or other settings will be affected or deleted.

Forgot your iPhone password and is locked out of your device? Many people may find themselves in this situation. In fact, this can happen due to various reasons, for example, you simply forgot your password, someone wanted to steal a glance at your iPhone and enter it incorrectly wrong password to cause your iPhone to turn off. In this case the only way to fix this problem is to restore your iPhone. There are several ways to help you restore iPhone to factory settings without passcode in just a few minutes. In this post we will be guided by the factory reboot iPhone XS/XR/X/8/8 Plus/7/7 Plus/6S/6S Plus/6/5 without iTunes in the most convenient way.

Top 3 Methods to Unlock iPhone/iPad

Method 1. Bypass passcode lock on iPhone via iCloud

If you are looking for a way to reset iPhone settings to factory settings without iTunes or passcode, you can use this method if you have enabled Find My iPhone feature before. The Find My iPhone feature should be able to help you destroy all the data on your device. Do it:

1. In a web browser, open the iCloud.com page, go through the authorization procedure with using Apple ID and password.

3. Click remove device. This will delete your iPhone and your forgotten password.

After doing this you can now restore from backup device or set up like new.

It is extremely important to note that you will need to connect your iPhone to Wi-Fi or cellular network so you can use the Find My iPhone service.

Method 2. How to remove password from iPhone using Tenorshare 4uKey

If you want to reset your iPhone to factory settings and remove the iPhone passcode, the article also presents one of the simplest and quick ways solutions to your problem. - this is a tool for times iPhone lock, which allows you to unlock your iPhone without a passcode. The software is also available in Russian.

Download and install the program on your PC/Mac before we begin.

Step 1. Launch the program and connect your iPhone to your computer via a USB cable.

Step 2: Once the tool recognizes your device, you can click "Start" to remove the code iPhone access.

Step 3: Before you unlock iPhone password, download the latest version iOS firmware through the Internet.

Step 4. When software downloaded to your computer, you can click "Open Now" to start restoring iPhone without passcode.

Step 5. The whole process takes a few minutes. Please keep your device connected to the system recovery process.

Step 6: When the iPhone passcode is successfully removed, you can set up your iPhone as new, including the passcode, Touch ID.

Method 3. Restore iPhone via tool, if iPhone is disabled, connect to iTunes

You have another recovery option disabled iPhone Restore to factory settings without iTunes using System Restore Tool - .

Now install the latest version of the program by clicking the download icon below:

Step 1: Launch the program and connect your iPhone to your computer using a cable. Click " iPhone factory settings" in top corner to directly enter the advanced system recovery interface.

Step 2: In Advanced mode, click "Fix" to start downloading the firmware package.

Step 3: Download the appropriate firmware package by clicking the "download" button.

Step 4. Once the firmware package is downloaded, it will be completed and successful. Click "Start Restore" to restore your iPhone to factory settings.

So, this is basically what you can do to factory reset your iPhone. But just as mentioned in the Tips section, if you're afraid to do some customization on your iPhone, just don't mess it up. Lead him straight to troubleshooting experience to solve the problem with forgotten code access.

If you want too. The above methods can solve your problem.

IN Lately The issue of updating software or flashing an iPhone is increasingly of interest to owners of devices from Apple. There is a lot of information on the Internet about how to carry out these manipulations yourself, but very often these instructions miss the nuances associated with system errors during installation operating system. This article describes cases when an iPhone cannot be restored and what can be done if such failures occur.

In fact, there are many reasons for refusing to restore a gadget through iTunes. This could be either problems in the hardware of the device, or a banal outdated version that does not allow you to restore the iPhone via iTunes, the appearance of error 9, or an incorrect reset of all settings. Below are the main variations of faults with detailed analysis each of them.

The very first thing you need to do is iTunes update. To do this, open the program and check it for new versions. If you were unable to roll back your phone through iTunes, you can simply delete the application and download it again from the official website, checking the latest version of iTunes. How to download new version iTunes, you can find out by going to

As trivial as it may seem, a regular reboot can help out: both the computer and itself. Apple devices. While you reboot your PC standard method, take the phone and simultaneously hold down the Power and Home buttons for 10 seconds, after which the smartphone will reboot. Now try connecting again and starting the recovery process.

For older iPhone models

For new models (8, 8 plus, X)

Replacing the USB cable

First, you need to make sure that the connection is made using an original and certified cord. The point is that if you use non-original cable usb, then it will provoke a refusal to install the firmware. If everything is fine, but the process still does not start, carefully inspect the wire and connector for damage.

Using a different USB port

Very often, people connect a device through ports located on the keyboard or other peripheral devices and are surprised that they cannot reflash the device. Try connecting your iPhone through another USB port located on the back of the system unit.

Cleaning the PC

This procedure will require a little effort. You need to remove programs and components to iOS devices, which are installed on your computer or laptop. Go to the "Control Panel" and go to the "Programs and Features" section, then uninstall all Apple apps, while confirming the erasure of all additional files.

Don't forget to uninstall iTunes as well. Since in any case you will have to download all the necessary utilities again, restart your PC before installation. After completing the procedure, you can start updating the smartphone firmware again.

Editing the hosts file

When updating or renewing an Apple device, iTunes will certainly contact Apple servers, and if this fails, you can safely assume that the hosts file has been changed on the PC.

Typically, the hosts document is modified system viruses Therefore, before resuming the starting hosts file, it is preferable to check the laptop for the presence virus dangers. This can be done either through an antivirus by running the recognition mode, or with the support of a special utility Dr.Web CureIt, which cures necessary files. If problems remain, move on.

Disabling antivirus

Thanks to the excessive care of antivirus programs, they can block certain processes, even absolutely secure applications. iTunes may also be included in this blacklist, which will lead to interference and failures, which is why, during recovery, it is not possible to roll back iOS to the latest normally working version. First, add the snail to the antivirus exclusion list; if this does not help, then disable the blocker completely and check the result.

Recovery via DFU mode

This mode is intended for emergency resuscitation of Apple gadgets. To use it, follow the instructions below:

• First, completely turn off your phone and launch the iTunes application on your computer.
• Next, connect the device via USB cord to the port and set it to DFU mode.
• To do this, simultaneously hold down the “Home” and “ON” buttons. Both buttons cannot be released for 10 seconds, after which the “ON” key must be released and the second button held until the iPhone appears in the program on the PC.
• The application will notify you that you can begin the recovery procedure. After confirming the action, your cell phone will be updated and will work normally.

Using another computer

The last hope for the desperate owner of a damaged smartphone is to try to restore the device by connecting it to another PC. Before doing this, you need to make sure that the system has the latest iTunes version and installed on Windows computer has a license. By connecting your smartphone to your computer, via USB port do iOS recovery, if possible. Things are very bad if even this method did not help.

Most likely, you will have to carry the device in service center, where it can either be replaced under warranty or the fault can be identified and repaired. 90% that the problem is in the memory chip responsible for storing iOS files.

Conclusion

Having tried all the methods described above, repair and restore the operating room Apple systems gadget, you will 100% determine that in case of failure, it is not the software part that is to blame, but the mechanical part, in which, most likely, it will simply not be possible to change the firmware. To make your task easier, contact a specialist who will certainly be able to help you.

Video

The iTunes application gives the user the opportunity to restore the iPhone to a backup state or reset all settings to factory settings after a critical failure or unsuccessful system update. Rolling back is quite simple, since the general algorithm of actions consists of only two steps:

1. Reset your smartphone to factory settings;
2. Restoring user data using a backup.

Nuances of recovery

Before you start restoring your iPhone, you should remember:

1. Only the current and licensed (must be signed by Apple) version of the firmware can be restored. Thus, a user of the fourth iPhone with system version 4.2.1, which has long been outdated, will not be able to rollback through iTunes. The application will throw an error that cannot be ignored;
2. This moment is for people whose iPhone is locked. When the firmware version is upgraded, the modem version will most likely also be upgraded. For such phones, before starting the rollback, it is recommended to use the Redsn0w program;
3. If the owner didn't backup copy system state, then when restoring all user parameters will be reset to factory settings. This will result in the loss of all data on the iPhone.

After all the nuances have been taken into account, we can move on to the instructions on how to restore an iPhone via iTunes.

Restore to factory settings via iTunes

First of all, the iPhone must be connected to personal computer with Internet access so that the device downloads all available updates, and launch iTunes. We then follow the algorithm:

• Go to the “Browse” section, look for and click the “Restore iPhone” button:

• A confirmation window will pop up. All the consequences of the rollback will also be described here, like complete removal media files and other information.

Once the user agrees, the rollback procedure will begin. The process can last from 5 to 20 minutes. As soon as the restoration is complete, the iPhone will reboot with factory settings, which means that all data is erased.

Restoring data from a backup

If a serious failure occurred during operation, which significantly reduced the performance of the device, and you had to reset it to factory settings, then all files can be restored from a recently created backup copy.

For this:

• Turn on iTunes, connect the smartphone to the personal computer and put the iPhone in recovery mode;
• Go to the files section or call this menu using the ctrl+B buttons;
• In the devices section, select the option to restore files using a backup copy:

After confirmation from the user, the file recovery procedure will begin.

Possible errors when restoring iPhone via iTunes

It is not uncommon for recovery to be accompanied by errors. The two that pop up most often are 3194 and 1013 (the latter is associated with locked iPhones).

To fix failure code 3194, there is an algorithm:

• Launch the “My Computer” folder and look for hosts;
• Using notepad or WordPad, open the found file;
• With help search string, called by the ctrl+F key, or manually look for the inscription gs.apple.com, delete it and save the document:

How to fix error code 1013 (during all actions, the iPhone must be connected to the computer):

• Download the redsn0w application from the official website;
• Run the program as administrator;
• In the window that appears, click Extras and then Recovery Fix;
• Click Next. On the smartphone, in accordance with the instructions in the utility, set the DFU mode.

Of course, these two recovery failures are not the only ones, but they are the ones that users encounter most often.