The monitor resolution is not set in the settings. How to find out and change screen resolution (image is too large)

All tips

Some monitors may not have a screen resolution that matches what Windows offers.

If you have installed Nvidia video card You can add your screen resolution in one of the following ways:

Method 1.

1) Launch Panel Nvidia control.
2) Open Display → Change Resolution → Add Permissions... → Create Custom Resolution
3) Set the parameters you need, test them and add it to the list for selection
4) Select it and use it.

Method 2.

Using the registry, add the permission you need to the parameter NV_Modes

Which is along the path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video\(some number)\0000

You can also find other threads containing the parameter NV_Modes and also add the screen resolution you need to them.

Method 3: Before installing the driver.

Open the file "nv_disp.inf" in the folder C:\NVIDIA\Win7\xxx.xx (where xxx.xx is your driver version) and find the value

Below him in NV_Modes There will be all available screen resolutions, add yours there.

But it happens that even after the above manipulations, a new resolution is not added. In this case, you will have to use special programs to force the addition of a user permission.

PowerStrip- A program for managing the parameters of the video subsystem of your computer, supports a huge variety of video cards. A program that supports video cards from a wide range of chipsets and suppliers, simultaneously, under any operating system. The program provides access to over 500 controls over your display hardware, including color tools corrections, setting the screen geometry period level, and driver-independent clock controls.

Screen Resolution Manager- A program that allows each computer user to set their own screen resolution. In addition to resolution, you can adjust color depth, frequency, brightness and contrast, color scheme and other settings that will automatically take effect after loading a specific user's profile.

Instructions

If you are working on a computer with installed system Windows 7, then most likely change the resolution monitor you will not have to. operating room Windows system 7 is good, among other things, because it installs itself necessary drivers to the video card and monitor, and also selects the optimal one for your monitor screen resolution.

However, if the need to change the resolution still arises, go to the desktop and click on it right click mice. A drop-down menu will appear on the screen, from which select the line “ Permission screen" (you can also get to this menu item through "Start - Control Panel - Appearance - Adjust screen resolution").

In the window that opens you will see your current settings. The “Screen” line must indicate the name monitor, which you are using, in the line " Permission» - screen resolution set to currently, in the “Orientation” line - the orientation of your screen (“landscape” or “portrait”). Typically, in the line " Permission"next to the current dimensions in brackets is indicated "recommended" - that is, this is the resolution that the system considers most suitable for your monitor. If you want to change it, click on this line and drag the slider with the mouse to the value you need.

Click the "Apply" button. The selected settings will take effect immediately and a window will appear asking “Save these screen settings?” You can choose "Save" or "Cancel". If you do nothing, the change will be canceled after a few seconds.

If the new resolution suits you, click “Save”, followed by the “OK” button.

When running on systems older than Windows 7, it may indeed be necessary to manually change the resolution monitor, since these systems do not always select best option. To do this, right-click on the desktop on any empty space and select "Properties".

In the window that opens, go to the “Options” tab. The type of your monitor, under which there is a section “ Permission screen." Here, use the slider to select the resolution you need, then click “Apply” and, if the selected resolution suits you, the “OK” button. After this, the selected resolution will take effect.

Sources:

how to change monitor resolution

If permission screen monitor does not meet your requirements, you can change it in the settings operating system computer. With its change, the clarity of the display of texts will change and the number of elements that can be placed on the desktop space will change.

Instructions

In Windows XP, the resolution is selected in the properties window screen, to launch which you need to right-click on the workspace free of shortcuts and in context menu select the “Properties” line. In the settings window screen go to the “Settings” tab. You can get to this tab in another way: press the WIN key and launch the control panel, and in it click the “Appearance and Themes” link. In the “Select a task” list there will be the line you need “Change screen».

Section "Resolution" screen" is located in the lower left part of the Settings tab. Move the slider with the left mouse button and select desired value and click the OK (or Apply) button. The utility will change permission and will open a dialog box with a timer - if you don’t like the look of the desktop in the selected resolution screen, then you don’t need to press anything. Without receiving confirmation, the utility will return the previous value and you can try another option.

Sometimes permissions screen contains only a few values, none of which provide acceptable image quality. Typically this means that the OS is using

Typically the maximum resolution modern monitors exceeds the 1920x1080 standard, if they have a large screen diagonal (25" or more). Monitors with a small or medium screen diagonal of an older generation can support the standards 1600x1024, 1140x900, 1366x768, 1280x1024. The limits of the capabilities of your monitor or laptop display in terms of its resolution you need to know in order to avoid problems with setting a value that is not supported by it. The maximum possible screen resolution is indicated in the instructions for monitors and laptops. Usually after installing the video driver required resolution screen is adjusted automatically and in system settings Windows screen listed as recommended.

But the video driver does not always automatically select optimal resolution screen. In such cases, without manual intervention to set the desired resolution in the system settings or using the video driver manager - as a rule, either Catalyst Control Center, or “Nvidia Control Panel” - there’s no way around it.

1. Right and Wrong Ways to Adjust Screen Resolution

The screen resolution can be adjusted using the operating system by calling the context menu on the desktop and selecting “Screen resolution” in the case of Windows 7 and 8.1.

In the case of Windows 10, you need to select “Display options” in the context menu, then “ Extra options screen."

Here, in the context menu on the desktop, as a rule, there is also a command to launch the video driver manager. In its window you need to look for the settings tab to set the screen resolution.

It is advisable to change the screen resolution only in the system settings or inside the video driver manager. And not with the help of various third-party programs that provide such an opportunity. While Windows display settings and those in the video driver manager are protected from using a screen resolution that is not supported by the monitor (the new resolution is first tested for a few seconds with a preset option to return to the original value),

third party programs and games can apply the new resolution immediately, without prior testing. And sometimes even without the user’s request. And if applied not supported by the monitor or a laptop display, the resolution is too high or, conversely, too low, as a result we get dark screen with the words “Out of Range”, “Out Of Range”, “Input Not Supported” or with another message, but the same essence. Experimenting with screen resolution in Windows settings or video driver manager, such a nuisance can be avoided: if an unsupported resolution is mistakenly set and the screen turns off, after a few seconds it will return to the previous screen resolution and turn on again.

Setting an unsupported resolution may also be a result of viruses entering your computer.
So how to solve the problem if a screen resolution that is not supported by the monitor was applied?

2. Participation of the second display

Solve the problem yourself in a simple way This is only possible if at least two monitors or a monitor and a TV are connected to the computer. The same applies to a monitor or TV that is periodically connected (accordingly, previously configured in the system) to the laptop. The problem is very easily solved even if the resolution of the main display is set to an unsupported one, not the secondary one. And even though the image on the second screen is not duplicated, but expanded. What should be done? On the empty desktop of the second screen, call up the context menu and select “Display Settings” for Windows 10 and “Screen Resolution” for system versions 7 and 8.1.

Most likely a window system settings The screen will open on the main monitor in pitch black. In this case, blindly press the +Shift+right/left arrow keys to move the window to another screen. And set the supported resolution for the main monitor.

If to system unit Only one monitor is connected, but there is another monitor or TV in the room that may support set resolution screen, you can try to solve the problem using the latter. All you need to do is connect another, temporary display instead of the current monitor. And with its help you can already set the desired screen resolution. It may very well be that modern TV will be able to cope with the resolution, which turned out to be too high for the main monitor. And, conversely, there is a possibility that CRT TVs, connected using an S-Video cable (for older video cards) or using a special adapter for a VGA cable (of course, if one is available), will be able to display an image with a low resolution of 640x480 or 800x600.

If there is no other savior display or one also does not support the problematic screen resolution, in order to cope with the task, alas, you will have to resort to “dancing with a tambourine.” Especially in the case of Windows 8.1 and 10 installed on the computer.

3. Removing the video driver in Windows safe mode

To change back the screen resolution supported by the monitor, you need to boot Windows in safe mode, where the system runs at the base screen resolution, without starting the video driver. In safe mode, the video card driver will have to be removed. Then, having already launched into normal mode system operation, the video driver will need to be installed again.

3.1. Safe Mode for Windows 7

In the case of Windows 7, this process will be easier due to the ease of logging into safe mode. Need to hard reset using button Hard Reset and when starting the computer, press the F8 key. Once on the menu additional options boot, you need to select the “Safe Mode” option.

3.2. Safe Mode for Windows 8.1 and 10 using their installation media

For Windows 8.1 and 10, the F8 key does not work, just as in most cases its analogue, the Shift+F8 combination, does not work due to the reduced system startup time. You can get into safe mode in these versions of the system without seeing anything in front of you using installation media any of these versions - even Windows 8.1, even Windows 10. Reboot the system using the Hard Reset button, go into the BIOS and set the boot priority from a DVD or flash drive. At the first stage Windows installations press Shift+F10 to launch command line. In its window we enter:

Press Enter. And we are waiting for notification of successful completion operations.

Close the command line window. In the Windows installation start window, click “Next”.

Click “System Restore”.

Then select “Continue”.

After restart Windows computer will boot into safe mode.

3.3. Safe Mode for Windows 8.1 and 10 with Recovery Disk

If you have previously created a disk Windows recovery, it can be used in the same way as an installation disk or flash drive. After booting from the recovery disk and selecting your keyboard layout,

you need to select “Troubleshooting” (this menu option can also be called “Diagnostics”),

then – “Advanced options”,

and then launch the command line.

In its window, enter the above command and press Enter.

3.4. Safe mode for Windows 8.1 and 10 blindly

If there is no installation media with Windows 8.1 or 10, no recovery disk, if there is no second computer with which any of them could be organized, or you are simply too lazy to tinker with all this, you can try to enter safe mode from a working but invisible system blindly. But in this case, you need to carefully enter values, know exactly what language the keyboard layout was in before experimenting with screen resolution, and also be in Windows environment, not inside a 3D application (not all games can be minimized by pressing +D). So, what actions need to be taken blindly?

Step 1: If the layout was not in English, switch to it using the +space keys.

Step 2: launch the command line as administrator by successively pressing the keys +Q, cmd, Ctrl+Shift+Enter.

Step 3: if the speakers are working, we will hear the usual system sound UAC; Press the left arrow, then Enter.

Step 4: enter the command line command mentioned above

bcdedit /set (default) safeboot minimal

Press Enter and wait a couple of seconds.

To make your computer screen settings as comfortable as possible for your eyes, you need to know how to change your monitor screen resolution. personal computer or laptop.

Screen resolution is an indicator that determines the clarity of the display of all icons, pictures, that is, graphics in general. It is important to determine what will be best for the monitor.

Changing an extension using built-in OS features

How higher resolution, the better the display clarity. For example, a 22-inch display will have a standard resolution of 1680*1050, which is optimal and maximum for this screen.

All available sizes available in the settings, it is advisable to choose the largest of the proposed ones.

Follow the instructions to change the image resolution of your display:

Go to the operating system desktop. Right-click on it and select screen options, as shown in the figure below;

In the window that opens, you can adjust the size of text, icons and other system elements in real time. You can also adjust the screen orientation. To go to the selection tab, enter the word “resolution” at the top in the search bar;
Select “change screen resolution”;

Click on the drop-down list as shown in the figure and select the standard recommended one. Save the new settings.

Important! It happens that the recommended resolution is higher than the display. That is, the size of the final image does not correspond to the screen size, so some elements of the desktop may disappear from the user's field of view. Adjusting the monitor will eliminate this problem. In the selection options, choose not the recommended one, but the one that fully displays all the elements of the desktop. At the same time, all graphics must be clear.

Several common types of expansion and corresponding display sizes:

1024*768 – perfect for screens of 15 or 17 inches. In a display with a resolution of 1024*768 pixels, the color depth is 16 bits;
1280*1024 – intended for displays whose size is 19 inches;
Types of monitors measuring 24 inches most accurately convey the image at a resolution of 1920*1080. All displays with these parameters are FullHD.

Adjusting the screen refresh rate

The higher the display refresh rate, the correspondingly better quality Images. That is why, in addition to size, it is necessary to pay attention to this parameter. To change the refresh rate follow the instructions:

Go to the control panel. IN search bar enter “Screen” (without quotes);
In the proposed search result, select the item that is responsible for the screen refresh rate, as shown in the figure;

Set the most high frequency updates. This will eliminate possible periodic flickering of the monitor.

NVIDIA Software

How to find out the right resolution for your display? This can be done on the official website of the manufacturer or in the instructions that come with the device.

On the boxes of monitors and laptops from Samsung there is information on how to set the correct resolution and what to do if the real one does not match the declared one.

By using special program, which is preinstalled on all computers equipped with an Nvidia family video card, you can also adjust the resolution of the user's monitor. Follow the instructions.

What is screen resolution? This is a parameter on which the clarity of the picture on the monitor depends. The higher the resolution, the smaller the pixels—colored elements (dots) that make up a digital image, like a mosaic.

When the screen resolution is low, the pixels become larger and their total number becomes smaller, so the picture looks grainy and blurry. If you look closely, it all consists of small squares, which is especially noticeable on thin lines and contrasting color transitions. Icons and windows appear disproportionately large at low resolutions, and their edges often extend beyond the screen.

In minimum resolution (800×600) working Windows table 7 looks like this:

At high resolution the number of pixels increases and, accordingly, their size decreases, so the image looks naturalistic and clear, there is no graininess. IN maximum resolution(1366x768) Windows 7 desktop looks like this:

The maximum permissible resolution depends on the technical properties of the display matrix and the capabilities of the video card. If you had to install Windows 7 yourself, you must have noticed that immediately after installation the minimum screen resolution is 800x600, and you cannot change it to a higher one, even if you have an ultra-modern, powerful video card. This is because the system uses basic video, the purpose of which is to provide at least some visibility of what is happening on the computer. To “squeeze” the maximum out of hardware, you need to install the appropriate drivers.

How to change screen resolutions?

After installing the video driver, the screen resolution is automatically set to the optimal one and its settings become available to the user. Install one of several standard resolutions possible using Windows tool 7 “Setting the screen resolution.”

Go to the control panel and from the sub-items of the “Appearance and Personalization” category, select “Adjust screen resolution”.

Another way to access this setting is the “Screen Resolution” item in the desktop context menu.

Clicking on one of these items opens the “Screen Settings” window. The resolution setting is available from the list item of the same name, next to which there is a drop-down menu. Inside the menu there is a scale with a slider, by moving which you can change the screen resolution from minimum to maximum. This setting on different computers varies, and this, as already mentioned, depends on the properties of the display matrix and the capabilities of the video card.

Having set the desired value, click the “Apply” button. After this, the resolution will change, and a window will appear on the screen asking you to save the change. If you are satisfied with everything, press the confirm button; if not, do not press anything: after a few seconds, the display parameters will return to their previous settings.

That's all the setting is - the screen resolution changes immediately, you don't need to restart the computer for this.

Setting a custom screen resolution in Windows 7

Modern monitors and laptop displays display images best when operating at the resolution recommended by the manufacturer. But in the list of available Windows permissions 7 what you need may not be there, that is, system tools they won't help you. For installation non-standard resolution will be needed third party software. These could be proprietary utilities from monitor manufacturers or programs for setting up video. As an example, let's look at one of these programs - PowerStrip - a utility for overclocking and fine tuning video cards It, among other things, allows you to change the screen resolution within a wide range.

Download PowerStrip from the link and install it on your computer.
To adjust the display resolution, in the main PowerStrip window, in the “Connected Monitor” section, click the “Change” button.

To create an inf file where the settings profile of the selected monitor will be stored, click “Create”.

In the “Monitor Information” window, in the “Output Options” section, set the desired vertical and horizontal display resolution, then click the button with the floppy disk icon to save the profile.

To apply the settings, you need to restart the computer, click on the PowerStrip icon in the system tray, select “Display Profiles” from the menu and point to the saved profile.

By clicking the “Settings” button here, you can get to the section for changing screen parameters. In this window you can set a different resolution and create several more profiles.

Troubleshooting after changing screen resolution

Sometimes due to setting an unsupported display resolution after Windows boot 7 only a black screen with a cursor is displayed and nothing else. In this case, the settings must be returned to standard. This is done like this:

Reboot your PC by clicking before restarting Windows key F8.
From the advanced startup options menu, select “Safe Mode.”

After starting the system, go to the screen resolution settings and set one of the standard values, preferably low (then you will change it).

After this, reboot into normal mode, change the resolution to optimal and the problem will be solved.