The screen on my smartphone is cracked, what should I do? What to do if your phone display is cracked


Let's find out! We'll try to figure out what went wrong.

Let's start with the reasons. Let's divide them into groups, like everything related to technology. You have heard more than once in your life that the warranty does not cover mechanical damage and liquid spills. Let's start from this.

We can talk for a long time about flooded devices and the reasons for sensor failure after liquid ingress. There can be a lot of them! Liquid and current, this mixture is unpredictable! And it is unpredictable because it can damage almost any element of the system. Or maybe even after liquid gets into the device everything will be fine; after it dries completely, it will work as before. But let me make a reservation right away: you shouldn’t flatter yourself with hopes that everything will pass and the gadget will “come to life”!!!

It can “come to life” only if it has been turned off, sometimes it “comes to life” if it is immediately turned off, but the main thing is that after everything it has dried thoroughly. So with a guarantee that short circuit when turned on, it will not happen. And here there is one important condition, the liquid in which the equipment was “bathed” or filled was WATER. Yes, if it was water, there are chances. If it's sweet tea, beer, wine, juice. Everything that contains sugar, gases, dyes, any impurities. This is detrimental to electronics. Be prepared that after this, expensive repairs may be required, and if water gets in, don’t relax, the repairs can affect everyone. It’s better not to risk it, but to take it to the nearest service center, let them clean it, and restore the damaged parts if necessary. To make a device non-repairable, you need to either complete absence spare parts, which is extremely rare or something fantastic, for example, splitting a device with an ax. Then the opportunity to repair will disappear. But we are talking about liquid ingress; repairs will depend only on the feasibility of restoration. The result is filled in - we go to the service.


Now let's move on to the axe. Just kidding, although an ax is a useful thing, we won’t consider it. Still, if a hatchet actually went through your device, send us a photo, it’s interesting to see. Save the leftovers as keepsakes. (Let's post best photos In this article).

Speaking about mechanical damage, you need to clearly understand that they are all consequences of an impact! There is no such thing as a sensor cracking like ice on its own. Well, since we decided to find out what to change, we need to understand the force of the impact and the scale of the damage. IN any device with a sensor, d The display module consists, roughly speaking, of two parts - a touchscreen and a display. The display is responsible for the picture, the touchscreen for interaction with the device. And if your device shows “signs of life,” then it will need to be repaired.

If the device does not show “signs of life,” then take it to the service center and, after diagnostics, make a decision on the advisability of repair. “Signs of life” when the display and sensor are not working, this is any confirmation of the operation of the device, indication, vibration, sound... This means that the “victim” is still “conscious”, and not all is lost. And if there are no “signs of life”, then only diagnostics can reveal the breakdown; now all devices are repairable, it’s a matter of price. We know of cases where, for the sake of information, the same device - a donor - was purchased and the memory was resoldered. After all, in most cases, personal gadgets become storekeepers of information that are of particular value to the user. Let's move a little away from the topic, let's return to display modules and their mechanical damage...


For modern devices, as a rule, there are 3 replacement options:

  • touchscreen

  • display

  • module (this is a touchscreen and display assembly)

touchscreen- an information input device, which is a surface that responds to touches.

display - electronic device, designed for visual display of text and graphic information.

module- a device designed to visually display information with a touch-sensitive surface.

What does the display module consist of?


Without going into details, the module consists of: touch glass(touchscreen), and display, glued together. Glue provides better color rendition, without an air gap, the picture looks “juicier”. And this method prevents dust from getting between the layers.

IN Lately An active race has begun for display production technologies: LED, AMOLED, IPS, AHVA, PLS. Everyone wants to make their screen brighter, more accurate, and juicier. We will not touch on manufacturing technologies and their differences. But anyone modern display consists of: a polarizing layer, it is needed for more accurate color rendering, the display itself and the backlight.

As a rule, a module is a part completely ready for replacement. Exceptions include some variations where a frame may be required to install the module. The frame serves for tight gluing of the housing and the module. Often, if you repair it yourself, it’s easier to install the module...


So let’s move on to the “symptoms” and consider the options.

  • The touch glass is intact, the display is broken.

    Such situations are not fantastic; if the touchscreen is not glued to the display, then it may turn out to be more flexible than the display. And then, at the moment of impact, the sensor will bend and the display will be damaged. After all, touch glass does not imply the presence of glass as such. Now sensors are made from scratch-resistant polymers. While the displays mostly have a fragile glass coating. In such a situation, the display needs to be replaced.
  • There is a “cobweb” on the glass of the device, the sensor works, there is an image.

    In such a situation, it’s up to you to decide aesthetically, if it suits you, then use it to your health. Paste the film so as not to get hurt.
  • There is a “cobweb” on the device’s display, the sensor does not work, but there is an image.

    If we are talking about a phone or tablet, then it is impossible to use such a device. Definitely replacing the touchscreen or module assembly. If you have a laptop and it does not interfere with your work, then use it to your health.
  • There is a “cobweb” on the device display, the sensor does not work, the display is broken.

    Definitely replacing the module, or the touchscreen and display together, in such a situation it is also impossible to use the device.

A simple table for self-diagnosis; it is visually easier to perceive the information.

"cobweb" on glass sensor works display is working recommendations
No Yes No replacing display or module
There is Yes Yes replacing the touchscreen or module
There is No Yes replacing the touchscreen or module
There is No No module replacement

Legend:

  • "Cobwebs" on the glass - the presence of chips and/or cracks.
  • the sensor works - the device responds correctly to touch.
  • The display is in good working order - the display is in full working order, does not ripple, shows “like new”.

Do not be biased by the table, recommendations for replacing the module, everywhere. Yes, the module is more expensive, but the cost of replacing a module is often lower, and it is also faster and more reliable. Usually, if the display was originally glued to the touchscreen, replacing the module In the end it won't be much more expensive than replacing the touchscreen. After all, not all services will undertake to unstick the module; there is a high risk of damaging the display with a piece of touch glass, and sometimes this is simply technically impossible to do. And simply because most equipment does not have separate touchscreens for sale. Therefore, whenever it is necessary to repair equipment with a sensor, we are talking about laptops, tablets and phones. First of all, find out about the possibility and cost of a separate replacement of the display or touchscreen, and compare it with the cost of the module.


We hope that this information was helpful to you, Site Team.​

Ilya Burenin Student (186) 1 year ago

The display is the part on which the image is displayed; it is the display that displays information and makes it visible to you. If the display is broken, it’s easy to understand - you either see nothing, or you see streaks and black blots or uneven stripes.
A touchscreen is a touch glass. The essence of the touchscreen is the same - you touch it with your finger to call up this or that function, or perform some action. If the touchscreen is broken, this is also easy to understand. The cracks are superficial, you can feel them with your finger, the sensor may lose sensitivity.
The term “glass” is relevant for those phones that do not have a touchscreen, and their display is protected by non-touch glass.
Remember: if your phone has touch control, then there is no separate glass in it. There is no glass protecting the touchscreen. It can neither be purchased nor installed. The touchscreen is a single, inseparable whole. AND...

0 0

Often, when touch phones or tablets are handled carelessly, cracks or so-called “cobwebs” appear on the front panel of the device after unwanted contact with asphalt or other hard objects. Here we will try to explain what to do and how to understand what has broken.

1. Cracks appeared on the front part. Can it be replaced?

We are often mistaken in thinking that the front of the device and the sensor are two different parts. This is wrong. The front part of touch phones is the touch glass itself (touchscreen). There are cases when, after a fall, the touchscreen continued to work, although it had visible damage. But, as a rule, over time, spontaneous clicks, incorrect reactions to touches, or complete inoperability appear. If your front part has crashed (also called - protective glass, not to be confused with protective glass that is glued instead of film), then you will have to change the touchscreen (sensor).

2. The sensor is broken, but the display...

0 0

Since ancient times, films have been the most popular means of protecting the phone display. At a time when touch screens They were also resistive, the plastic top layer was quickly wiped, scratches collected on it, and if dropped, the sensor could be damaged and become unusable. However, the film is scratched, is not 100% transparent, impairing visibility, and the finger does not always glide over it well. With the advent of thin and transparent tempered glasses, as well as the development of oleophobic coating technology, protective glass began to be offered as an alternative to films. As their manufacturers assure, such coatings save the screen from scratches and impacts. But do you need a protective glass on your phone? This material will help you find out.

A little physics

Tempered glass is ordinary glass that has undergone physical and chemical treatment. During the manufacturing process, it is subjected to high-temperature heating and is also etched in special reagents. During processing it changes...

0 0

Apple Corporation developed and released a wonderful digital device– iPhone. With multi-functional capabilities and sleek designs, these portable mobile devices have won the attention of many users around the world. Thanks to high-quality components and high-tech assembly, iPhone communicators are reliable and long-lasting. But such digital devices are not immune from mechanical damage, which entails various deformations. Particularly vulnerable parts of the communicator are the body and screen. If an accident happened to your computer companion and the iPhone screen broke, then service center"PDA Center" will solve this problem and make a replacement iPhone screen all models. The PDA Center company carries out repairs of mobile devices from any manufacturer of portable computer tools. The company's special focus is on repairing Apple phones, since this procedure requires special qualifications. iPhone communicator screen...

0 0

Good day.

I dropped the phone and the protective glass cracked (I think the display itself is intact, because shadows from the cracks are visible on the display itself, the display itself works great, there are no broken pixels, the screen responds perfectly to pressure over its entire area). The authorized service center claims that you still need to change the display, because... This protective glass is included in the video module, and this is 50%+ of the cost of the phone. He spoke the truth on the phone, because... The service center is quite far away

I was repairing push-button phones, there would simply be a solution to replacing the front panel or case, but there was no need to deal with touch sensors, service manual for this phone(DNS S4704) I didn’t find it, I tried to disassemble it, but when I started the process of disconnecting the front panel, the protective glass began to crumble and crack, so I didn’t do it until I didn’t have the components.

Questions (if anyone has encountered this)
1. Is it really...

0 0

Many people are interested in the question of how to protect their smartphone screen from damage. Defects on the display occur according to the most various reasons– this includes accidental blows, jolts, falling onto a hard surface, and carrying a smartphone in the same pocket with coins and keys. Of course, the owner of any device, even a top-end device, even a simple smartphone entry level, I would like the surface of the screen to remain flat and smooth for as long as possible, without scratches, cracks, chips or abrasions.

Defects on the display occur for a variety of reasons.

Some will say that it is enough to stick it on the display protective film. Alas, she does not always live up to the hopes placed on her. And then it comes to the rescue strained glass.

Tempered glass: what is it?

It is made from chemically treated tempered glass and is several times thicker than traditional protective film. On sale you can find glass whose thickness is...

0 0

By purchasing even inexpensive smartphone, it is worth buying accessories to protect it from damage. It is especially important to protect the smartphone screen, because if it is damaged, we will lose the ability to use the device.

To protect the smartphone screen, most of us purchase a special film. And this right purchase, screen in protective film It scratches less and the risk of breaking it is also reduced. But there is another type of screen protection - glass.

Advantages of protective glass:

Its resistance to mechanical damage is much higher than that of films. You can even try to scratch the highest quality glass with a knife or scissors, and there will be no marks left on it. Also, protective glass significantly reduces the risk of damage to the screen due to impact loads.

Protective glass lasts much longer than protective film.

Protective glass holds up much better than similar film.

Disadvantages of protective glass:

The price for such glass is higher than for film...

0 0

Technological progress does not stand still: telephones, which previously could only make calls, today combine great amount functions without which we can no longer imagine our lives. We sell a huge variety of accessories for our “favorites”: cases, protective glasses and films, plugs for the headphone slot, pendants - it’s too much to list. Some of this is just decoration, some is a necessity. The latter also includes protective glass for your phone. How to glue and what functions does it perform? And is it really necessary?

Why is it necessary?

Before you figure out how to properly glue the protective glass onto your phone, it’s worth understanding why it’s even needed. In terms of its functions, glass is the same as film, but the latter can only protect the screen from scratches; in the event of a fall, the probability of a happy outcome is very small. Those glasses that are widely available are tempered, so that if the phone is in danger of being broken, the entire blow will be taken upon itself...

0 0

Although modern phones They have long been equipped with reliable and durable displays, but I still want to somehow secure my device. However, hyper-accuracy awakens to all new things. Only after a while, when you get used to them a little, do you begin to love them less. Same with smartphones. Time passes - and they are already thrown, and not put down, they often sit down and put down cups of coffee. But that's all later.

Now that the brand new device has just been taken out of the box, it needs to be protected from all sorts of dangers. To do this, a case is put on the case, and a protective glass or film is glued to the display. Which one is better will be discussed below.

What is a protective film?

There is no need to consider screen film as some kind of high-tech product. They learned how to produce plastic a long time ago, but it was simply not needed for such purposes. Typically, films have three layers, and the topmost layer provides protection. The middle layer should absorb...

0 0

10

Display protection mobile device– something that interests many users. Any mechanical damage the screen can be accompanied by very serious problems. There may be slight freezes in the operation of the sensor, or the screen module may completely fail. Therefore, it is recommended to apply to each model protective covering. It provides cell phone protection different conditions. However, when purchasing protective glass, you must follow certain recommendations. In our article you will learn how to choose a protective glass for your smartphone.

What is safety glass?

The protective coating is made of specialized “tempered glass”. And it is pre-treated with chemical compounds. If you compare it with ordinary film, you can understand that a device with protective glass is several times thicker, which indicates its reliability.

Before choosing a protective glass, you should learn a little about the features of this protection...

0 0

Before you apply the protective film, let's figure it out: Do you need a protective film on your smartphone?
There is no exact answer, but let's try to figure it out.
Roughly speaking, smartphones can be divided into two types: smartphones with a plastic display or with tempered glass.


The first, for the sake of economy, use ordinary cheap plastic on displays, which is easily scratched and literally after a week you will notice that the smartphone screen is covered in micro-scratches.

The latter use tempered glass, which is not so easy to scratch, but it is possible.
As is already clear, in the first case, a protective film is necessary to preserve the normal appearance of the smartphone. In the second case, a protective film, imho, is not needed.

Protective film is a thin polymer coating (transparent) coated with glue on one side. Usually supplied with two additional stickers. layers that you must peel off before you apply the protective film to your...

0 0

12

I have always glued matte film, I like the feel and there are no blocks. My husband gave me a new phone and installed glass. Ugh. I don't like it at all. The video is bad, fingerprints are now needed all the time. I'm freaking out. I'm afraid to tear it off so as not to damage the glass. I'm suffering.
I don’t know what kind of glass you glued, maybe it different things happen, I a year ago I bought a new phone and the salon immediately offered to stick the glass on it - 350 UAH it cost then, I’m very happy, I don’t even notice it, not that it interferes in any way, whoever doesn’t know, won’t even understand when they look at the phone what’s stuck on glass and everything is clearly visible on the phone, there was a film on the old phone, so that’s where the crap is, you need to periodically re-stick it with a new one, because over time it gets rubbed, scratched, bubbles begin to appear and the appearance becomes shabby: but the glass is more like new...

0 0

13

If you are asked about “protective glass for a smartphone,” you will unanimously say “ Gorilla glass"And you will be absolutely right - “there is such a letter in this word,” Leonid Yakubovich said this. But the fact is that Gorilla glass protective glasses are used mainly in mobile devices (mainly smartphones) and are not sold separately. And as practice shows, it is not so difficult to damage the screen of a smartphone (even if it is protected by a “gorilla”) - just scratch it with something more durable (a ring with a diamond, grains of sand in your pocket, etc.). So what should we do? Is it really necessary to change the screen every time it becomes covered with “cobwebs” from a couple of grains of sand in your pocket or lands carelessly from a seemingly small height?

One of the most reliable options is the use of films or protective glasses. For a number of reasons, we don’t really like films, so today we’ll talk about protective glass – using Mamoru Shield glass as an example.

Broken screen– perhaps the most common...

0 0

14

Screen cracked touch phone- what to do?

According to statistics, cracks that appear on the screen as a result of not too careful handling of mobile gadgets are the most common reason for contacting repair shops. And this is not surprising, because the display is the notorious Achilles heel for any, even the most expensive and famous mobile phone. What to do if the screen on your touch phone is cracked, let's figure it out together. It’s better not to risk it and immediately replace it https://meizu.telemama.ru/zamena-stekla-na-meizu-mx.html

What to do if your phone screen is cracked?

So, there is a problem - after a fall, cracks appeared on the screen of the mobile phone. How to act in this situation and how dangerous are they for both the phone itself and its owner? It all depends on the degree of damage received. For example, if there are one or two cracks, and they do not interfere normal operation mobile gadget, it’s quite possible to get by with half measures - stick it on top of the screen...

0 0

Phones often fall; glass, being the most fragile part, breaks first. It would seem that there is no problem going to replace the glass on your phone, but in practice everything turns out to be not so simple.

Previously, the glass on the phone was replaced separately, and the glass cost a penny. They are still inexpensive, but with the advent of the era of touchscreen phones, the procedure for replacing glass has become significantly more complicated. What is the current price for replacing glass on a phone, taking into account labor?

If you have a touchscreen phone and its glass is broken and requires replacement, then you need to know the following:

Modern touchscreen phones come in two types: those phones in which the sensor is connected to glass, accordingly changing the glass, you change the sensor, and the cost of touchscreen glasses is already much higher, since in addition to the glass itself, there is also a touch panel with a cable that has a connector on motherboard phone. Still, replacing the touch glass is not as expensive as the cost of replacing the glass itself on more expensive models.

The most advanced phone models, company flagships, such as Iphone 4, Iphone 5, Samsung Galaxy S3,Galaxy S4, HTC One, Nokia Lumia 920, Sony Xperia Z and others have a more complex screen design: the phone screen consists of LCD display, which actually transmits the image, a sensor (touchscreen) responsible for pressing, and glass, which is protective and decorative. In this case, the screen module is one-piece, the components are glued together industrially, and according to the manufacturer’s instructions, the entire screen can be replaced.

Glass replacement procedure.

However, the glass can still be replaced. The procedure for replacing glass on top-model phones is as follows: the display module is heated using a special hair dryer or a special heating pad, the glue that glues the glass to the sensor is softened, then using a knife, a thin spatula, or a plastic playing card, special molybdenum wire and similar devices, the glass is disconnected from the screen. Then the remaining glue is removed using a special solvent, a scraper, napkins, soft cloth, etc. The new glass is placed either with double-sided tape or with a special UV glue (similar to the factory one).

In the description it looks quite simple, but in practice everything is far from so.

First, achieve uniform heating of the surface display module extremely difficult, there is a danger of overheating the display and sensor, after which either the image will disappear or the sensor will not work correctly. This can appear either immediately or after some time.

Secondly, it is possible to remove the glass without problems only if there are one or two large cracks on the glass, but in the case when there is a web of small cracks on the glass, the glass will crumble, and the fragments can easily damage the sensor, as a result you will still have to replace it entire display module. Also, from the impact, there may already be microcracks in the display, which do not manifest themselves in any way before the procedure, but when heated and/or pressure on the glass can lead to failure of the LCD display itself.

Thirdly, cleaning the sensor from glue is also not useful for the phone; the glue is removed with a scraper, cloth, etc., the impact on the sensor is quite serious, which can also lead to its failure.

And finally, in most cases, craftsmen install new glass on double-sided tape pasted around the perimeter of the screen; it is impossible to ensure a tight fit of the new glass; over time, dust will accumulate under it, and the tape itself may come off.

Not everyone knows how to put new glass on glue; it requires not only special glue, preferably German, but also an ultraviolet lamp (the principle of glue hardening is like in a dentist’s office when they put a photopolymer filling), and preferably special equipment for the display and glass to ensure 100 % accurate glass hit in its place.

The work of replacing glass takes up to three hours, it is extremely painstaking and requires a very highly qualified technician. At the same time, if something doesn’t work out, then the master is also responsible for it; it is impossible to explain something to most clients. No guarantees can be given for the successful outcome of the operation.

That is why most professional workshops will tell you that the glass cannot be replaced and will offer to replace the entire display module. Of course, you can find a craftsman or a service where they will take on this, but rest assured that the glasses there are changed in an amateur way, the probability of success is 50/50, the probability of further performance and preservation appearance phone even lower.

What our service center offers:

1. Professional replacement of Samsung Galaxy glass at a price of 3,000 rubles (including the cost of glass). The phone is ready in 1-2 days.

Note: Experience shows that in 99% of cases the glass on the phone can be changed, while maintaining the appearance of the phone from 85 to 100%. Statistics on the further performance of the display and sensor have not yet been accumulated (there have been no secondary requests from people who received a replacement).

2. The glasses themselves for Samsung, Nokia, iPhone, HTC - you can buy glass from us and replace it yourself, or contact those who offer to replace glass cheaper than ours.

3. We offer replacement of the display or touchscreen along with the glass: in this case, you are guaranteed to get the most low price screen replacement in the city, using original spare parts and with full preservation of the functionality and appearance of the phone.

In any case, it's up to you! We hope that the above information will help you make the right decision.

So, in case you need a replacement Samsung glass, Nokia, Iphone, Sony, HTC, LG, Fly and other phone models, we are waiting for you in our service!

Ring! Smack! Clap! Slap! Crunch! It may sound different, and the reasons for this may also be very different, but when a smartphone encounters hard surfaces, the consequences for its owner are rarely joyful.

In addition, the law of the sandwich, as luck would have it, works reliably in such cases. Although when this very law was invented, there was no trace of expensive and fragile touch panels.

In general, he knocked. Emotions, understandably, surged. But the oohs and ahs, whether virtual or real, sooner or later subside, and the brain quite legibly generates the question required in such cases: “What to do?”

And then he begins to slowly throw up some information from his memory: they chose a beautiful case, not a strong one, insurance is an incomprehensible matter, so they ignored it, and Yes-ssss.ka! - the glass is cracked, the smartphone screen has gone out, and it definitely won’t be repaired under warranty. But I just bought...

So, what to do when your smartphone screen is broken? We stop being nervous and think, gradually:

#7. We need to find a working replacement device

A modern mobile user, faced with a completely everyday problem in the form of a broken screen of his favorite smartphone, for some reason suddenly decides that this problem can only be solved by buying a new device, and a truly new one, and not just another one.

Yes, we live in a consumer society, but it is still a society in which you probably have friends or just good acquaintances. So why not ask them for some time old smartphone, one of those that are not quite ancient and still work decently. Surely there will be one. Why do you need so many friends on VK, LiveJournal and other Facebooks if they’ve been willing to let you use their used Samsungs for a couple of weeks?

#6. smartphone screen crashed - let's face it

The screen of the smartphone was broken - there is such a thing, but it wasn’t blown to pieces. Turned on? Is the text readable? Touchpad Does it at least respond to touch? Does your finger obnoxiously catch on the protruding plastic every time you swipe it across the screen? Not really? Great! You are already thinking, which means the end of the world has not come yet. Try testing your smartphone. It may work normally, without the same comfort, of course, but it will be usable for a while. Let's move the thought further...

#5. Do-it-yourself repair?

No, well, for some, just one such decision may seem like a real feat. However, nowadays repairing and replacing a smartphone screen is not such a super complicated job. Detailed video guides on self-repair smartphones. Any spare parts are available for free sale. Here, for example, is the Lenovo S720 touchscreen - more details. By the way, it is sold just for such cases.

We find the necessary videos, watch, learn, and draw conclusions. Many advanced users, thanks to this kind of lessons, have been doing some minor repairs themselves for a long time, and thus technical level increasing and saving money. So, it's worth being curious. Of course, there are also disadvantages to such an idea: the risk of making things even worse is always present. But if you’re not lazy, and have had steady hands since childhood, then you can always try. Don't feel confident or are we just afraid?

#4. smartphone screen is broken - we are looking for a repairman

Repairs at an official service center officially certified by the manufacturer are officially cool, but expensive, and also, by the way, official. That’s why even owners of all sorts of fashionable flagships often turn to ordinary workshops or familiar craftsmen. If you don’t really trust the guy who works at a kiosk on the next street and fixes everything right there, then you can look for a larger service and go to one of the network workshops. The essence of the fable is the same: your broken smartphone screen will be repaired or replaced, but it’s more logical not to spend too much money.

#3. smartphone screen is broken - exchange or sell

Even if a huge crater has formed where your smartphone screen used to be, there is still something left. So they will buy it. Today, mobile devices are bought in any condition. It is clear that you are unlikely to get rich from this, but you will earn something and in this way compensate for part of the costs of new device. And there is also a trade-in system. This is when your old or broken smartphone will be exchanged for a new one at an additional cost. Analyze your options.

#2. Secondary

Let’s reveal a secret: your smartphone is a serial product, and it was produced or is still being produced in “small” series of hundreds of thousands of copies. Accordingly, they are sold in the same quantities. The same, for example, Lenovo s720, if you managed to smash the screen in it, you can buy it on the Internet from your hands. Do a little digging on sites that sell used electronics, a little care when inspecting and purchasing. Yes, it will be a different smartphone, but exactly the same, with a whole screen, and cheaper than in the store. Don't like used smartphones?

#1. Take a new one

Also an option. Simple, fast and guaranteed. And why not please yourself if there is such an opportunity? A broken smartphone screen is an excellent reason for this, I must say...

Nizhny Novgorod, 09.12.2012, website

Broken screen mobile phone- This is one of the common malfunctions with which owners turn to repair shops. In the manufacture of devices, hard but brittle glass is used, which is quite often exposed to external factors...

Broken mobile phone screen- This is one of the common malfunctions with which owners turn to repair shops. In the manufacture of devices, hard but fragile glass is used, which quite often under the influence of external factors: impacts, falls, squeezing, breaks, and the screen stops showing.
It is not possible to visually determine the severity of damage to the display. If deep cracks appear or in the form of so-called “cobwebs”, as well as if liquid crystal leaks, you must immediately contact an experienced technician. It should also be taken into account that cracks are not always visible on the screen. Instead, light spots may appear in the center of the display. If the phone's protective glass is broken, it must be replaced.

Today, the problem of a broken display is resolved quite quickly and effectively in specialized service centers.

The display of a mobile phone is an element that, unlike the body, loses its functionality when hit or creates certain inconveniences during operation.
Faced with similar problem, the phone owner has two options to solve the problem:

  1. Contact qualified service center specialists.
    If serious damage is detected during diagnostics, you will have to buy a screen for your phone (a new original or non-original display, depending on your desire) so that the technician can replace the old one.
  2. Go to the secondary market for the purpose of selling.
    In this case, the cost of your mobile device will be greatly reduced.

Before making a hasty decision, it is best to consult with experienced specialist and find out the cost of display replacement services.

Unlike the case, you cannot replace the screen of a mobile phone yourself. Therefore, when cracks appear and deep scratches It is better to contact service workshops to avoid more serious malfunctions of the device.

Damage to your mobile device, such as a broken or cracked display, is not a reason to get upset and sell your phone at a low price. By visiting a specialized store that sells spare parts for phones, as well as a service center, after a short time you will be able to enjoy a new look for your mobile phone, without scratches, cracks or a broken screen.


Return to news list
This can be done on Samsung through the Kies program or simply by logging in from another phone. google account- should have made a backup copy.
Nokia's Zoo program
Well, if your mother uses your phone, then no way) But if not, then you can keep it in an opaque case...






2024 gtavrl.ru.