The phone does not connect to the Wi-Fi router. We solve the problem when a phone or tablet does not connect to Wi Fi
Modern life is quite difficult to imagine without phones and the Internet. Therefore, modern smartphones provide the ability to work with the Internet. At the same time, most people use Internet access using WiFi. This is due to the fact that it is much more convenient, and a large amount of money is not spent.
Reasons for lack of Wi-Fi on your phone
It can often happen that the phone connects to Wi-Fi but does not connect to the Internet, this may be due to various reasons, let’s look at them in more detail:
- The first thing you might think about when connecting to the network is whether the Internet itself is paid for. But this rarely happens;
- therefore, the problem is quite solvable;
- It may be that the Internet is connected, but it is written: without access to the network. This happens quite often;
- The phone does not connect to Wi-Fi, it says obtaining an IP address. It turns out that you connect to the Internet, the connection is shown, but at the same time the connection itself does not occur;
- authentication error. This is also a fairly common reason why the Internet will never connect;
- error type: “Saved, WPAWPA2 protection.”
This may not be all the problems that may occur when connecting to the Internet from mobile devices. But at the same time, they are the most common. Many people, not knowing what to do, immediately try to call the operator and find out why they do not have Internet, although, in many ways, the problem may not be on their part.
Video: How to connect the Internet to your phone?
Cause Solutions
It is logical to assume that it is necessary to solve these problems, therefore, we will tell you how this can be done.
Therefore, in addition to the usual tips in terms of rebooting the router, there are a number of really useful and more
Restarting the router
Many people wonder why I can't connect to the Internet and what can be done to solve it. There is one procedure that every person can do, and that is restarting the router. This can help with many problems where your phone won't connect to your home Wi-Fi because it can help you set up your router again.
Rebooting can be done in several ways:
These are the main ways in which you can reboot. This is really quite simple, but I would like to note that the first method is the highest quality, and at the same time gentle on the device itself.
Removing the old connection
Also, one of the solutions to Wi-Fi connection problems may be to delete the connection strictly. At the same time, you get the opportunity to reconnect to Wi-Fi and enter a password, this will give you the opportunity to reconnect to all parameters, and possibly solve the problem with connecting your phone to the network.
The problem is solved mainly because when you delete the old connection, all Wi-Fi settings are deleted, allowing you to reconnect with new settings.
All this suggests that you will be able to work with the network. But this does not mean that you can solve any problem in this way. This is just one of all options.
Video: How to remove unnecessary network connections
Changing the channel in the router
You should change the channel in the router when you start having constant problems with your Internet connection. Because it may happen that two routers operate on the same channel, and then this is precisely why such interference occurs. If you have often had similar connection problems, then this is exactly what needs to be done.
Also, there is a possibility that for the same reason there may be such a problem: Wi-Fi works within only one room, and then it catches, but the Internet does not load sites. This may just be due to interference that occurs from other devices. Therefore, it’s worth changing the channel, especially since nothing bad will definitely come from it.
Connection password
Probably everyone understands what a connection password is and why it is needed. It is with the help of it that you can connect to Wi-Fi of any network. Using the Internet also depends on the correctness of this password.
Many people advise changing the password if necessary to solve connection problems, because this may be the problem.
Checking MAC and IP addresses
An IP address is what is assigned to a device after connecting to the Internet. It is necessary to check the MAC and IP address, because this may be the main problem of the lack of Internet in the device.
Checking the IP address is not that difficult to do; just go to the network settings. The correctness of this address gives you the opportunity to work with the Internet without problems or interference.
Encryption/Security Type
One of the reasons for the lack of Internet or the inability to connect to it is the wrong type of encryption, which plays a rather large role for devices. There are devices that work and support only one type of Internet connection, and sometimes connecting to the Internet is impossible precisely because the parameters do not match.
If such a problem occurs, then simply check the encryption type and change it if necessary. Then you can reconnect Wi-Fi and check its operation. Basically, the type of encryption is the last step in troubleshooting connection problems.
Why doesn't my phone connect to Wi-Fi - authentication error
Connecting your phone to the Internet via Wi-Fi always happens without any problems, but there are times when you need to take additional steps in order for the connection to happen. The most common cause is an authentication error. As in all cases, it is advised to go through many steps that can help solve the problem.
It is quite difficult to solve such a problem since you do not have access to the router settings. But you can simply check the password, and that's the only thing you can do. An incorrectly entered password also leads to authentication problems. Therefore, to prevent this from happening, you just need to be careful.
Error Saved, WPA protection
Also, most people ask questions like: Why doesn't my phone see the network? This problem is quite logical. The first thing that could be, of course, is a problem in the router, or an error Saved, WPA protection, this problem is completely solvable. It occurs quite often, and mainly due to the fact that there was some failure in the router settings. And in such cases, the phone sees Wi-Fi but does not connect.
As a result, we can say that no matter what problem you have, the first thing you should do is reboot the router. Because it is quite safe, does not require a lot of time, and besides, anyone can do it. Then you can begin other actions, which will be more complex, but at the same time, you can cope with them.
>Wireless networks are so ingrained in our daily lives that many people find it difficult to imagine life without Wi-Fi networks. This standard is used in almost all devices - from personal computers to video surveillance systems. Now many in the family have their own personal computer, as well as a smartphone, e-reader and other gadgets whose operation depends on the Internet. Therefore, Wi-Fi routers, or as some call them routers, are now available in almost every apartment.
With the development of IT technologies, routers can be configured from any device
Many people already know how to set up their Wi-Fi devices; to do this, just connect them and the computer to the LAN connectors and complete the settings according to the manual, which is almost always included. But what can be done if there is no electronic computer at hand? In this article we will look at how you can set up a router from a phone or tablet when you don’t have a PC or laptop at hand.
Before you start setting up your router, you must, of course, turn it on. We connect the power adapter to an electrical outlet and connect the main Internet cable to the WAN router connector, usually it is highlighted in blue.
Next, you need to reset the device settings to factory settings. It doesn’t matter whether you bought a new one in a store or have already used it before, you need to do this, because if it was already connected and configured, then it could have saved parameters that are not suitable for your network. To reset the settings, you need to find a small hole in the back of the device, next to which there will be the inscription “Reset”, inside of which there is a button. Take something sharp like a needle or pin and press while holding this button for a while. After about 10 seconds, the lights on the router should blink and it will reboot and restore the factory settings.
Connecting the phone to the router
If you reset the settings to default, then there will be no password for your device’s Wi-Fi network, it will be public. Go to your phone's settings, turn on Wi-Fi and find your network in the list of wireless networks. It may have a standard name, which will contain the name of the company that manufactured the device, and this network should also have the best signal level. If you doubt that this is exactly the network of your router, then try turning the device off and on, and on the phone your network should disappear from the list and then appear again. Click on “connect”, and if the connection is successful, the network status will be displayed at the top of your gadget’s screen in the form of an icon indicating that Wi-Fi is active.
Setting up the router
The process of setting up the device via phone is the same as in the case of using a computer or laptop. To configure, open any web browser installed on your phone, for example, google chrome, and in the address bar enter the standard address for all gadgets 192.168.0.1 or 192.168.1.1, click on the “Go” button. In the window that opens, 2 empty fields will appear, where we will need to indicate the login and code to access the router admin panel. Since we reset all the settings to standard, this data will also be standard, most often the specified user name is admin and the password is admin. If this data does not suit you, look at the bottom of the device itself or in the instructions, all this should be written there. Once you have entered these details, you should be taken to the router's web interface itself.
Actually, setting up the router itself consists of three steps.
Setting up an Internet connection
The main step is to specify the parameters of your provider; in the router’s admin panel, these settings are most often made in the WAN tab. Here you need to indicate the type of connection to the World Wide Web (for example, PPPoE, the most commonly used in Russia), as well as the user name and provider password. This login and password pair was given to you upon connection. Try to find your contract that was given to you when you connected to the Internet, everything should be written in it. After specifying these settings, save them. You can also try to perform automatic step-by-step configuration of the device; some devices can do everything automatically, as well as determine the type of network through which your router connects to the provider. In this case, you will only need to indicate your username and password.
Setting up Wi-Fi
If you don’t want strangers to use your wireless network, thereby slowing down your Internet connection speed, you can set up Wi-Fi by setting a password for it. Then only those to whom you tell this password will be able to access the global network through your router.
Go to the Wireless section of the admin panel, and in the Wireless Network Name line, indicate the name for your wireless network. By specifying the name of the Wi-Fi network, it will be easier for you to navigate when connecting other devices. Next, go to the Wireless Security tab and specify security settings. Select the recommended WPA/WPA2 as the security type, and in the Password field, enter your access code, consisting of at least eight characters. Do not come up with a password that is too complex, because in the future you may have to enter it on your other gadgets, and this will create unnecessary difficulties for you when connecting.
Changing the password for the admin panel
To ensure that no one can change your options, even if you have access to Wi-Fi, you can protect your admin panel by changing the standard login and password pair to your own, more complex ones. Depending on the router manufacturer, these settings may be stored in different tabs, for example, System tools; after finding the desired tab, look for the password parameter. Here you need to set your name and password. After the above, the device must be rebooted so that it turns on with the new options. After the reboot, open the list of Wi-Fi networks on your phone and find the network name that you specified during setup; you will also need to enter your new data. If everything is done correctly, the phone will automatically connect to the Internet. To check this, you can try going to any resource on the global network.
So we learned how you can easily set up a router without even having a computer or laptop at hand. In general, the setup procedure is almost the same as when operating a PC. If you have previously tried to configure a router from a PC or laptop, then doing it from your phone will not be difficult at all.
If you have a desktop computer or laptop at home, then setting up the router should not pose any problems. Installed, connected, configured, and everything is ready. But what to do if you don’t have a computer and you want to set up a Wi-Fi router yourself. A common situation in our time, now many people access the Internet from tablets, phones and even TVs. A Ved router can work without any problems without connecting to a computer, I wrote about this.
So, if you don’t have a laptop (PC), but you want to install a router yourself and set up a Wi-Fi network at home, then this can be done without any problems from the same tablet or smartphone (phone). The main thing is that the device can connect to the Wi-Fi network. Well, if you decide to get a Wi-Fi router, then you definitely have such a device. Your tablet or smartphone can run on both Android and iOS. That is, iPad and iPhone are also suitable. If possible, it is best to configure it from a tablet, of course. Only because the screen is larger and it will be more convenient.
The process of setting up a router from a tablet is almost no different from setting up from a computer. Except for the connection itself, and a few more nuances, which I’ll talk about now. The main thing you must have is an Internet connection (cable laid into the house) and the Wi-Fi router itself.
Setting up a router without a computer. From a tablet or smartphone
First of all, you need to connect the router and prepare it. Plug the router into a power outlet and connect the Internet to the WAN connector (cable from ADSL modem or Internet provider). You can view . No matter what brand of router you have, turn on the power and connect to the Internet. Also, connect the antennas if they are removable.
Immediately after turning on the router, it will begin broadcasting the Wi-Fi network. If the router is new, the network will have a standard name. Something like: "Asus", "Keenetic-7534", or "TP-LINK_0919". It all depends on what kind of router you have. The network will be without a password.
If the network that your router starts to distribute has some non-standard name, or is protected by a password, then you need to reset the settings and then continue. Resetting the settings can be done by pressing the RESET button on the router itself for 10 seconds. Here are the instructions for .
We take our tablet or phone, go to the settings, go to the Wi-Fi tab, and select your network from the list of available networks. Let's connect to it. It should be without a password. If a password request appears, then we reset the settings (see above). In some cases, the code for connecting to the network is indicated at the bottom of the router.
Next, on your tablet or smartphone, open any browser (Opera, Chrome, Safari), in the address bar we type the address 192.168.1.1 , or 192.168.0.1 and we move along it. You can see the address of your router on a sticker, which is usually located at the bottom of the device itself.
Depending on the router, you may be taken directly to the settings, or a window will appear asking for a username and password. Typically the default is admin And admin. We indicate them and get into the settings. You can look at the universal one.
If you did everything correctly, you will be taken to the settings of your router. I logged into the Tp-Link control panel without any problems.
An important point when setting up a router over a Wi-Fi network
During the setup process, you will change various parameters, including Wi-Fi network settings. Basically, this is the network name and password. So, when you change the name of your Wi-Fi network and set a password, then after saving the settings and rebooting the router, problems may arise with connecting your tablet or smartphone (from which you configure) to your Wi-Fi network.
In any case, you will need to manually reconnect the device to your network. And if this doesn’t work, some errors like “failed to connect” will appear, then you just need to delete the network on your mobile device and connect to it again.
On an iPad or iPhone, simply click on the desired network and select "forget this network".
On Android devices, click on the network we need and select "Delete network".
After this, connect to your network using the configured password.
When you change the wireless network settings in the router settings, you will need to adjust the settings on all connected devices.
You can configure the router from a tablet or smartphone without any problems. It is no more difficult than setting up using a computer. Ask questions and share tips in the comments!
A very common situation: a user tries to connect to Wi-Fi from his phone, but nothing works. After reading the information below, you will learn why this is happening and how to solve the problem.
Initial phone check
Manufacturers are actively working to improve the stability of mobile operating systems, but from time to time any program crashes. That is why it is recommended to start solving the problem by checking the functionality of the phone. For Android, iOS and Windows Phone (Windows Mobile) the recommendations in this case are identical. Follow the sequence below.1. Restart your device and try connecting to Wi-Fi again.
2. Evaluate the number of connection signal strength indicators. If there are less than 3, try moving closer to the router or other wireless Internet source you are using to improve the quality of the connection.
3. Make sure Battery Saver mode is turned off. If necessary, connect the network adapter.
4. Turn off Bluetooth. Wireless connections may operate in the same range, which causes interference.
5. Turn off Airplane mode, if active.
6. Try to activate access to information about your location and connect to Wi-Fi - the legislation of some countries blocks connections via wireless networks when this option is inactive.
If the WiFi connection worked previously
If you have successfully used the currently problematic network in the past, delete the connection from your phone's memory. To do this, go to the list of networks, click on the problematic connection for a few seconds (until the context menu appears) and delete the connection.If all else fails, try connecting from your phone to any other available connection. Failure in this case will most likely indicate a breakdown of the radio module - only service center employees will help correct the situation.
Check if the connection is working. To do this, try connecting to it using any other device that has Wi-Fi functionality. If the connection does not work, change the router settings.
Important note! The procedure for entering the router settings varies depending on the manufacturer and model of the equipment. In most cases, to gain access you need to enter the address 192.168.0.0 or 192.168.0.1 into the address bar of your browser. The standard login and password are admin. If this doesn’t work, check the manufacturer’s instructions for the information relevant to your router.
First, try simply rebooting the router - quite often they freeze, which is why access to the Internet is blocked.
The further procedure is as follows.
First, you must ensure that the security key you entered is correct. Try entering the password to connect to the selected access point again, but more carefully, with the “Display symbols” (show password) option activated.
If you don't remember the password, check it in the router settings.
As an example, the procedure for interacting with a D-Link router is shown. In your case, everything will be almost the same; minor changes may only affect the interface, menu item names and other little things.
Once on the router settings page, do the following:
click the “Advanced settings” button;
in the Wi-Fi window, open the “Security Settings” link;
in the “PSK encryption key” line, look at the password and make sure that this is the combination you enter when trying to connect to Wi-Fi from your phone.
Secondly, make sure your router settings are correct - you need to check if DHCP technology is enabled. If it is turned off, the phone will not be able to obtain an IP address, which is why the connection will not work.
On the router settings page, click “Advanced settings” again and in the “Network” window, find the “LAN” category.
Enable DHCP if the function is disabled by changing the “Mode” line to the “Allow” state.
Save the changes, restart the router and try connecting to Wi-Fi from your phone.
If this does not help, there are 3 options left:
call the provider’s support service and find out whether the Internet works at all and whether any changes have been made to the connection settings;
submit your phone for repair;
have your Internet router repaired/replaced.
If our instructions did not help solve the problem, then write in the comments and we will definitely look into your problem.
How to connect WiFi on your phone?
From our article you will learn how to connect WiFi on your phone using the example of the widely used Android OS platform. However, it doesn’t matter what version of Android or even what operating system is installed on your phone - in any case, the step-by-step instructions for connecting WiFi will not be much different.
Instructions: how to connect WiFi on your phone
To connect Wi-Fi on your phone, you need to activate a special wireless network module. This is done like this - go to the “Menu” of the phone, then “Settings”, look for WiFi and drag the slider to the “On” position. Click on WiFi and select an available network. The mobile phone automatically searches for available networks in your area. After searching, all you have to do is select the desired network and connect to it.
Network access may be blocked; in this case, you need to click on the “lock” icon and enter the password, and then “Connect”. Save the result in your phone settings. The user comes up with the password himself, and if you are afraid of forgetting it, it is best to write it down in a notepad. After successful connection, an icon will appear on the control panel. After you use the Internet services on your phone, you can turn off the WiFi network, or it will be activated automatically when you use the phone.
Mobile Internet using a home router
If you decide to access the Internet from a computer, you can use the mobile Internet, which is connected using a home router. First, you need to type the required URL link into the address bar of your computer browser, and an automatic search for the wireless network will start. Having selected the network you need, enter the password, and after that the Internet page will begin to load.
Remember that you will not be able to connect to other people's WiFi access points, since to do this you need to know the password or agree with the person in advance about access to this network. Nowadays, there are a lot of organizations that “give away” the Internet for free. The so-called free WiFi access points are located directly in the premises where this service is provided.
We figured out how to connect to the Internet using a computer, and now we’ll tell you how to connect free Internet in various places outside your home or office.
Free WiFi connection outside the home
So how do you use a free hotspot? It's very easy to do. To do this, you need a cell phone that supports WiFi connection. The “Free WiFi” service is absolutely free, and it can be available not only in Internet cafes, but also in ordinary cafes, restaurants and other public areas, such as minibuses, buses and even some trams - in the same St. -St. Petersburg there are several trams equipped with a free Internet access point. The presence of such an access point is indicated by a special sign, and the network access password is most often given below.
The step-by-step steps for connecting are quite simple: launch a browser on your phone, then activate the search for available WiFi wireless networks. From the list listed, you must select the desired WiFi access point. To connect to this network, you may not need a password at all; you will automatically be taken to a page to gain access. At the bottom of this page there is a “Connect” button, by clicking which you can instantly use Internet services.
useful links
You may also be interested in another article on a similar topic. It's called.
We wish you a pleasant stay and hope that our instructions will help you establish stable Internet access!