Tariffication of home telephone from Beeline. Updating the firmware version of the DECT base station

Most people are accustomed to perceiving Beeline as an operator cellular communications. Another part is familiar with this brand from its Internet services. And few people know that, together with digital TV and Internet services, we can use the “Home Phone” service from Beeline. Moreover, it will not be just a landline telephone, but a very advantageous service telephony with inexpensive calls. Let's take a look at what this unique offer offers us.

Connection technology

If you think that a home telephone from Beeline involves pulling a classic copper telephone line, then you are deeply mistaken. The connection is made via a modern channel through which Internet access is provided. That is, telephony is available only to those who already use the Internet from Beeline. On the one hand, this is a minus, but on the other hand, today laying a regular analog line is irrelevant.

Home phone from Beeline is a modern digital service allowing you to experience all the beauty home telephony(which is being abandoned today in favor of mobile phones). Here are its main advantages:

• Favorable rates for long-distance and international calls - this is ensured by using the capabilities of IP telephony;
• A bunch of additional services– black and white lists will be available to you, as well as free caller ID, which in traditional telephony is a paid service;
• Keeping your number when moving - the main thing is that the new house has Internet from Beeline;
• The ability to make video calls - yes, a home phone from Beeline gives access to such exotic functions.

In a word, a home phone from the Beeline operator is a sea of ​​new opportunities for a modern person.

By the way, Absolutely any device can be used as a telephone push-button telephone with tone dial. It is also possible to use IP handsets, but you need to check with technical support for the list of supported models. Or you can do without any phone at all by installing the Softphone program on your computer - it will allow you to make video calls.

Tariffication of home telephone from Beeline

Let's now look at Beeline's tariffs. Connection is absolutely free by submitting an application to " Personal account" Call tariffs:

• To landline phones – 44 kopecks/min;
• To mobile phones throughout Russia – 2.5 rubles/min;
• On landline numbers throughout Russia – from 1.7 rubles/min (depending on the direction);
• Abroad – from 1 rub./min (depending on the country).

In addition, you have at your disposal a full-fledged Moscow phone number with code +7-499. And here are the tariffs themselves - these are “Unlimited + Beeline RF” and “Pay only per minute (time-based)”.

By connecting your home phone using the first tariff, the subscription fee will be 300 rubles/min. This amount includes an unlimited number of minutes to Moscow landlines and any Beeline phones in Russia - quite profitable proposition. Calls in Moscow and the Moscow region on mobile numbers cost 1.5 rubles/min, for landline phones in Moscow Region – 1.7 rubles. min. International and long distance calls are paid separately.

If you don't want to pay extra subscription fee, choose the “Pay only per minute (time-based)” tariff. Calls to Moscow landlines cost 44 kopecks/min, to Beeline numbers in Russia – 0.8 rubles/min, to other local mobile phones – 1.5 rubles/min, to landlines in the Moscow region – 1.7 rubles/min .

"Personal Area" home phone Beeline is located on the operator’s official website - here you can manage communication services, change tariffs, and connect options.

Let's now look at the cost of some other destinations (including international ones). Calls to Armenia via a home phone from Beeline will cost you 12 rubles/min, to Azerbaijan – from 16 to 19 rubles/min, to Kazakhstan – 2.1 rubles/min, to landline numbers in Crimea and Sevastopol – 1.8 rub./min, to Latvia – from 7.7 to 19.5 rub./min, to Norway, the Czech Republic and Italy – 2 rub./min, in the USA – 1 rub./min (to any phones), to China – 2 rub./min.

More detailed information You will find information about the cost of international calls via a home phone from Beeline on the operator's website - there are a lot of countries, and it is quite difficult and time-consuming to determine the prices for each direction. But in general tariffs for international calls similar to prices offered by IP telephony operators. And Beeline managed to combine the advantages of IP telephony and a classic landline telephone.

2012-11-27T01:00:00+0400 2018-03-15T10:46:32+0300 Vladimir Afanasyev

These settings have been tested for Panasonic KX-TGP500 using KX-TPA50 handsets and firmware version 22:58 . note that different versions firmware may have different web interfaces and/or different functionality. This manual is for a new phone or for a device that has been reset to factory settings. If you're sleepy, return your phone to factory settings.

KX-TGP500 supports up to 8 SIP accounts, 6 DECT phones and up to 3 simultaneous calls. This instruction also applies to setting up KX-TGP600, who came as a replacement.

Additionally: To ensure the basic parameters of the DECT database, you need to create a at least one new extension number and use the provided KX-TGP500 templates. Since many DECT phones are used in combination with a desk phone, the two phones must use the same extension number (using SIP Forked ID). In this case, you need to create a fictitious extension number, and configure new phone DECT. After preparing the phone with detailed information about the new number, you can delete the fictitious number from 3CX Phone and set up SIP account 1 with details about the existing number.

This guide covers all necessary actions. For successful configuration, all steps must be completed:

1) Register the first phone with a DECT base

2) Login to the basic web interface DECT stations

3) Update the firmware version base station DECT

4) Configure the information provided in 3CX Phone System for the new phone

5) Automatically transfer system settings to Panasonic DECT

6) Setting up additional DECT participants (including a second desk phone)

1. Registration of the first phone with DECT base

• Connect the DECT base station to power and to the network.
• Start the DECT base station. On at this stage, it will try to get an IP via DHCP.
• The LED on the front panel will blink when it is ready.
• On the first handset, press the joystick to enter the main menu.
• Set “ Initial settings” (Initial Settings) and go to the “Registration” section.
• Select “Register H.set”.
• At the base station, press the “Connection” button and hold it for 4 seconds, the LED on the base begins to flash red.
• On the handset, press the “OK” button and enter “0000” when prompted for a PIN code.
• If pairing is successful, the indicator will flash orange and “Handset 1” will appear on the phone display.

2. Login to the web interface of the DECT base station

• On the handset, press the joystick to enter the main menu and select “IP-Service”> Network Settings> IP Settings. Please note the IP address of the DECT base station.
• From the main screen, press the joystick to enter the main menu and select “IP-Service”>Network Settings again. Open “Embedded WEB” and change the setting to On. (ON)
• Using a web browser, go to the DECT base station web interface using the IP address found in step 1.
• The default username and password for the DECT base station are "admin" and "adminpass" respectively.

3. Updating the firmware version of the DECT base station

• Before use new system DECT, you must update the firmware manually.
• Open the DECT base station web interface > Maintenance > Local Firmware Update
• The firmware can also be found on the website: http://panasonic.net/pcc/support/sipphone/download/TGP/eu.html.
• Once the firmware update is complete, the new DECT base station will boot.
• Using the handset, you need to activate "Embedded WEB" as shown in step 2.

4. Configuring the information provided in 3CX Phone System for a new phone

• In the 3CX Management Console > Extensions, select “Add Extension”.
• Set up your number details on the General tab.
• Go to the phone provisioning tab.
• Enter the phone's 12-character MAC address. This information can be found in the DECT base station web interface under the Status tab > Network Status.
• From the drop-down list, select the model "Panasonic KT-TGP500"

• Click OK to create configuration file. The file is created in a directory on the web server and will be sent to the phone when it starts.

5. Automatic transfer of system settings to Panasonic DECT

• In the web interface of the DECT base station, select: “ Maintenance Maintenance>Provisioning Maintenance>Standard File URL” and change the settings as follows:

• Enter the URL http://IPofPBX:5000/provisioning/Config (MAC). Cfg. Replace IPofPBX with the 3CX Phone System IP address.
• Click save when you're ready.
• Wait until the indicator on the DECT base station changes color to green.
• This is the first SIP account associated with handset 1 and is ready for incoming and outgoing calls

6. Setting up additional DECT participants (including a second desk phone)

Until now, you have been setting up your first phone. If you need to connect additional handsets, then you need to configure SIP information for new accounts manually. All settings except extension number, extension ID and password for all SIP accounts are already configured when you set up the first extension. The mapping between the extension number and the handset number can be configured in the settings: "Base> Telephone> Multi-number". Here you can configure settings for incoming and outgoing calls.

To create more internal accounts in the DECT system, you need to:

1) Setting up a new number in 3CX Phone System. You do not need to configure settings in the "Phone Provisioning" tab.

2) Use settings from an existing number.

Then switch to Telephone>Call Control>Line 2 and fill in the display name and extension number.

Repeat this process for each additional DECT internal.

Flaws

• Can't download phone book 3CX
• Calls from queues and groups will leave missed call notifications (regardless of whether the agent picked up or not)
• If you use 3CX Phone for calls, the device will not play music on hold and you will not hear a tone.

Instructions for setting up your PANASONIC KX-TGP500 phone to work with the “Home” service digital phone Beeline Home Digital Phone 1 1. Connecting the phone to the network The KX-TGP500 phone combines all the advantages of calls using HD VoIP, classic functions phone, such as call transfer, conference call, etc., and easy way administration through a convenient Web interface. The KX-TGP500 phone package includes a base unit and a KXTPA50 DECT handset. Features and Specifications: Elegant design and large LCD display (2.1 inches) of the cordless handset with white backlight; High-quality, clear sound without distortion, noise and interference due to HDSP (High Definition Sound Performance) technology; Freedom of communication thanks to DECT technology; Supports up to eight SIP accounts; Supports 3 simultaneous online conversations; Low power consumption in standby mode; Possibility of connecting up to 6 KX-TPA50 DECT handsets to one base station; Ease of administration via the Web interface; Supported codecs: G.722 / G.711 u-law / G.711 A-law / G.726 (32k) / G.729A; Notebook for 100 records; Possibility of wall mounting. Home digital phone 2 The phone cannot work independently with the network " Home Internet Beeline." Therefore, it can only be connected through a router, recommended models of which can be found on the website http://help.internet.beeline.ru/internet/equipment Connecting the phone is shown in the picture. The cable included with the phone is plugged into the Ethernet port of the base station and into any “LAN” port of your home router (in the picture this cable has yellow). The hardware installation is completed, after turning on the power cord, the base station boots up for a while (30-60 sec) and the light on its front panel lights up orange indicator, which shows the connection with your home router. For further setup, it is necessary that the computer from which you configure the phone is connected to your home router. Home digital phone 3 2. Entering the phone adapter settings By default, the phone adapter expects an IP address from the home router via DHCP. Enter the “IP Service” menu of your phone. Next, enter the “Network Setting” section. In the “DHCP” menu, see if the DHCP protocol is enabled (On), and if so, go to the “IP address” section in order to find out which address is allocated to the phone. The pictures show the corresponding sections of the PANASONIC DECT handset. For example, the Internet router allocated the address 192.168.1.149 to this phone: Next, you need to enable the internal Web server in the phone in the DECT handset IP Service | Network Setting | EmbeddedWeb. Without this, you will not be able to set up your phone: Home digital phone 4 Now you can log into the phone at the dedicated address using an Internet browser. By default, the phone has a login of admin and a password of adminpass. In the Basic Network Settings section you will see everything network settings, which the phone received from your Internet router. For static IP addressing, the appropriate addresses are entered on this screen: Home digital phone 5 3. Setting a password B System section| Administrator Password You can, if desired, change your default password to your own. Home digital phone 6 4. Phone settings To further configure the phone, go to the VoIP section and select SIP Settings | Line 1. On this screen you need to configure the server addresses - sip.beeline.ru and msk.sip.beeline.ru (for Moscow), and enter the credentials that you received when connecting to the service in your Personal Account of Beeline Home Internet - Your city ​​number, your nickname and your password. In the Authentication ID field, enter your city number (necessarily indicating the domain @sip.beeline.ru) In the Phone Number field, enter your city number. In the Line ID field, enter your nickname. It is through it that you can make free calls over the Beeline Home Internet network. The password is entered in the Password field. For other cities, you must enter other proxy server addresses: krs.sip.beeline.ru - Krasnoyarsk ufa.sip.beeline.ru - Ufa Home digital phone 7 ekb.sip.beeline.ru - Yekaterinburg spb.sip .beeline.ru - St. Petersburg Next you need to go to left menu VoIP Settings | Line 1. On this setup page you need to check the voice codec settings (CODEC Settings). Please make sure that your preferred codec (First CODEC) is PCMA, and your second codec (Second CODEC) is PCMU. Home digital phone 8 After making these settings, you need to save them in the phone: When saving the settings to the telephone server (Complete): Home digital phone will notify you that registration was successful 9 After that, you can go to the Status page and see the current status devices. The picture shows a phone with one activated connected number: The setup is complete and you can use the phone. Home digital phone 10

Instructions

Enable auto-on-hook in Panasonic to activate caller ID. To do this, enter the phone menu, select “Base settings” or Setting bs. Then press the 3 key on your phone. Enter the base PIN code, by default it is four zeros. Then press button 5, and then 2. In the “Enable auto-raise” item, press “OK”.

Use another method to enable caller ID if the previous one is not suitable for your phone model. Enter the phone menu, then go to the base station settings. Select "Automatic Caller ID". While inside this item, dial 255. Nothing will be displayed on the screen. After this, the “Auto Raise” option will appear. Select the "On" option and exit the menu.

Enable caller ID in Panasonic phone versions 5XX using service menu. To do this, go to the menu, then select “Change base PIN code”, enter the password 72627664. Then log in engineering menu phone. Go to the Write eeprom option, enter the address 007F. To enter F, press the R key, then the number 5. The hexadecimal character F appears. The remaining letters are typed in the same way, the numbers correspond to the letters in order: A=R0, B=R1 and so on.

Activate auto-pickup on your PANASONIC KX-TCD500RU phone. To do this, go to the menu, then select “Base Menu”. Enter PIN code 0000. Select "Other". Click OK. Select the option “Change base PIN code”, then “OK”. Enter the value 7262 from the keyboard. Next, dial confirmation 7664, after which you will enter the phone’s engineering mode. In it, select the second option and click “OK”.

Click Set address, enter 007, press R and 5. Next, enter 06 and press OK. After that, wait sound signal confirmation, turn off and turn on the phone again. Then select the number of calls from which the number will begin to be identified in the “Base settings” - “Automatic caller ID” item.

The automatic detection function is often available if there is a corresponding settings item in the phone menu, but disabling it is not always easy.

You will need

• - instructions for your phone;
• - numbers technical support.

Instructions

Read the instructions for your telephone. Go to its main menu and in the call management section, find the function to enable automatic number identification. Find the item to deactivate it, if there is none, try pressing the power button again AND HE.

If the function status has not changed, contact the dealer who sold the device if it is still affected by guarantee period. If it has expired, contact your device manufacturer's technical support or search for additional information on various technical forums regarding products of this brand.

To turn off the automatic number identification function in phone Panasonic, go to the menu for enabling this service and select disabling it in the context menu. Also, in some models this function is not provided separately; in this case, simply return to the standard factory settings in the system parameters.

After this, check whether the automatic number identification function is disabled in your device. In such phones, setting up is very difficult, so it is best to entrust it to the sellers upon purchase if you do not understand the device menu well, or consult with knowledgeable people so as not to accidentally change unnecessary settings.

If you cannot find the shutdown setting on your machine AND HE, contact your local technical support telephone exchange in order to this service your service provider has disconnected you. Most likely, you will have to fill out a special application form, and then, after the document is processed, automatic detection the number of the subscriber calling you will be disconnected, and for reactivation For this feature, you will also have to contact your telephony service provider to apply.

Helpful advice

Find out from sellers how the Caller ID function is enabled or disabled when purchasing.

The automatic number identification function allows you to identify the subscriber calling you and his name, if you have previously stored it in the memory of your communication device.

You will need

• - a telephone with an identifier function.

Instructions

Buy a telephone that has automatic number identification. Connect it to the telephone jack and, if necessary, connect it to a power source (may depend on the model). Please note that upon purchase the function may already be narrower, as, for example, in many Panasonic device models.

Also, if you stop using this feature by simply turning it off in your phone's menu, it will not automatically be removed from your phone company's list of services, so you will have to contact them in writing to stop providing the Caller ID feature.

If the automatic number identification function on your landline is not turned on automatically, fill out an application to connect to the service at the office of your telephone company. You will need a passport with registration at the address at which you are registered this number landline telephone or any other person who has the right to make changes of this kind to the list of services provided.

In order to enable automatic caller number identification for your phone, activate this function in the call settings section. AND HE Usually it is already turned on for cellular subscribers. If it was disabled previously, you can activate it by contacting technical support.

Video on the topic

note

If you disable ID in the landline menu, the feature will still remain enabled.

Qwerty keyboards are much more convenient than regular ones, but not in cases where you have a phone with touch control. If you decide to use it on your phone, make sure you have a stylus in advance, since this is the first time touch keyboard It's quite difficult to get used to on a phone.

Instructions

When entering a message or other data using the phone's touch keyboard, swipe the buttons to the right or left. If the input mode does not change to Qwerty, try opening context menu input and find the setting associated with your default keyboard. Also this parameter in some phones it is configured in general properties mobile phone or the themes of its design.

If the documentation for your mobile phone indicates that the device has a Qwerty keyboard and it does not turn on when you perform the necessary actions prescribed in the instructions, contact service center for repairs.

You can also try flashing it at home using special cable or flash cards. Best use standard firmware for your model.

If your mobile phone model does not have a Qwerty keyboard, install it separate element. This method is only relevant for smartphone owners.

Download keyboard for your model mobile device, scan the downloaded file for viruses. After that, copy the installer to the phone's memory module. Start the installation process from the file manager.

Please note that the keyboard you install as an application should not require access to the Internet, sending calls or SMS messages; most likely this software is malicious.

When correct installation run keyboard from the list of installed applications, minimize it and proceed to entering text in the browser, SMS message editor, and so on. Run keyboard from minimized applications and use it to write the desired text.

Helpful advice

Read the instructions before use - they are written not only for children and pensioners.

Automatic caller ID on landline phone allows you not only to find out who is calling you this moment, but also view all the phone numbers from which you were called in your absence. This is enough convenient function for both home and office telephones.

You will need

• - Panasonic phone.

Instructions

Enter the phone menu to enable Caller ID, select “Base station settings”, then select “Automatic determinant numbers." While in this menu, enter the numbers 255 from the keyboard. The “Auto Raise” item will appear on the screen - press “On”.

Activate the auto-raise feature to enable the detector. To do this, go to the menu and select “Base settings”. Press key 3. Then enter your PIN code (default is 0000). Then press the numbers 5 and 2 in sequence. When you receive incoming call Press the call button once to determine the number, and a second time to start a conversation.

Set up automatic determinant numbers in the Panasonic 325 model phone. Enter the “Base Setting” mode of the phone. Then select “Caller ID” and click “Ok”. Next, use the joystick to scroll down until a line appears on the screen. Dial the numbers 255 in sequence. Click “Ok”. Then select the “Auto-receive” option from the menu that appears. Then click on the “Ok” button.