Remove the firmware from the ssd disk. Intel ssd firmware update
Update Firmware S S. Firmware update on SSD I 520. Firmware update on SSD disk I from W W 7, W 8, W V, W XP. I did not find a clear answer to 21. Firmware update on supported I SSDs. Firmware update for SSD I. As it turned out, SSD I supports two ways to update the firmware 520 how to update the firmware of K series SSD drives. A firmware update has been released for SSD I 320 series 4PC. Firmware update for SSD drives I SS D 520 S firmware 400 how to return to old firmware Not so long ago. I bought it for my son for 120 GB. News I blocked new firmware for SSD due to a defect. A firmware update improves the performance of the I X25M SSD. I Corporation has released a firmware update for its X25M SSD drives. Owners of drives of this series are offered an ISO image with a capacity of KB, dated August 7th of this year
Errors in the microSD of new solid-state drives based on 34 nm. After that, run the downloaded EXE file and install the SSD firmware update utility I. I’m waiting for advice, for the second day I’ve been reading, reading, trying, trying without. What kind of mockery is it to offer this method as the only way to update the firmware? H F K SSD. Firmware update for I SSD 335 T ASSD Firmware update for SSD IS. No hassle with firmware; I SSD TB will decide what it needs. Update I SSD firmware without CDROM, via USB flash drives. Firmware update for SSD I 520 Firmware update for SSD drives from I. F called contents non-volatile memory digital. I updated the firmware for SSD X25M and X18M. Update Firmware S ST F. L for section News H. Solid state drives I series 520. Firmware update for SSD drives I SS D 520 S firmware 400
This was the difficulty of depicting nothingness, emptiness, hiddenness. 5 end 2009 update firmware to 520 actually? There was an inaccuracy in the native firmware, as a result of which the program kept a count of the cycles used. S The firmware has crashed Firmware update. Download new S I 520 drivers Software update. If you are a W user, take advantage of the I SSD T to perform firmware updates, which is. The newsletter comes out once a day and contains a list of programs from A S to P. An update is available for the I SS D T version. The new version of I S S D T I SSD T contains a new microcode update for the products. New version of the update I SSD TB 3. The main thing I would like to focus on is the stability of the SSD disk, which is directly related to what is installed. New firmware for SSDs produced by I and S have appeared on the Internet. A new version of firmware for the following models of SSD disks produced by I has been posted on the Internet. I has released a firmware update for its SSDs. I updated the beat before the start
Firmware Update S I. I have a question about how to update the firmware of this disk already installed in M P? How to update the firmware on even the opposite. Firmware update for SSD I X25M G2. January 19, 2018 AGWP. The company promised to release the update within two months ahead of schedule. Solid-state drives I demonstrated high performance during tests, but some. Firmware update S I. Firmware update for SSD drives. Can you give a review on how to do a firmware update for I SSD 330, 120 series? New firmware and instructions for updating to English language located on the website I, I recommend it to all owners of the above line SSD needed. T update the 520 firmware. Updating the firmware only allows you to avoid a possible deterioration in performance over time.
On December 15, 2016, a new firmware was unexpectedly released for SSD Kingston KC400 and Kingston HyperX Savage. New firmware version - SAFM001B. Unexpectedly - more so for the SSD HyperX Savage, since this drive went on sale in the spring of 2015 (more than a year and a half ago) and since then there has not been a single firmware for it in open access, although in new batches of this SSD the firmware was updated once or twice.This firmware is suitable for both SSD Kingston KC400 and SSD HyperX Savage, because they have very similar internal hardware: they have the same controller (Phison PS3110-S10), only the flash memory is slightly different and some other minor differences.
Firmware suitable for all models from the Kingston KC400 series - 128, 256, 512 GB, 1 TB and all models from the SSD HyperX Savage series - 120, 240, 480, 960 GB.
Is it worth downloading new firmware and updating it? Definitely worth it, because new firmware One rather serious problem in the operation of SSDs on some computers was fixed and performance was slightly improved.
This official firmware, available on the Kingston website. There - on the Kingston website there are English-language instructions for updating the firmware and a note (also in English) about what's new in this firmware. In addition, on the Kingston website, instructions and notes are scattered throughout various documents. Therefore, I decided to combine all this here on one page and translate the information from the instructions and the “what’s new” note into Russian. Well, I’ll add a few more words of my own.
In this article, I will tell you how to properly flash your SSD drive if you have any of the KC400 or HyperX Savage models.
Go.
What's new in the firmware?
From the official Release Notes this is what follows:Firmware Rev. SAFM001B (12/15/16)
- Resolved corner case behavior that forces drive into ROM mode after an abnormal initialization causing it to register as 2MB
- Modified Identify Word 47/59 for 3rd-party software compatibility
- Reduced aggregation of TRIM resulting in improved performance and responsiveness
- Resolved an issue where the SSD went into ROM mode and was detected as 2 MB after incorrect initialization
- Changed Word 47/59 definition to be compatible with third party software
- Reduced TRIM aggregation to improve performance and responsiveness
The new firmware seems to have fixed this problem.
Regarding the second point, I don’t really understand what this fix is and why it is needed. But, if they did, it means it has some role for the operation of the SSD.
Regarding the third point, everything is quite simple: the operation of the TRIM function has been improved, as a result of which “garbage” memory cells should be cleaned more efficiently. This should have a positive impact on the performance and responsiveness of the SSD.
Preparing for firmware.
First of all, check which firmware version is currently installed on your SSD. It is possible that your Kingston KC400 SSD or HyperX Savage SSD will be from a new batch and the SAFM001B firmware will already be built into it by default, in which case there is no need to flash it again if your SSD is working normally.You can check the firmware version in different ways:
- There is a sticker on the SSD box indicating the firmware version. Look for this type of inscription there - SSD FW;
- there is also a sticker on the back of the SSD itself indicating the firmware version;
- The firmware version can be found via various programs for disk diagnostics - Kingston SSD Manager,CrystalDiskInfo etc.
| How to check the firmware version in CrystalDiskInfo. |
In my case, the firmware version is SAFM00.r, this firmware was originally on my HyperX Savage SSD and it is much older than SAFM001B. So it needs to be updated.
Below is a list of known ones to me this moment Firmware for SSD HyperX Savage in the approximate order of their appearance:
1.
SAFM00.r- was in the very first batches released in the spring of 2015.
2.
SAFM00.U- appeared in games released at the end of 2015 - beginning of 2016.
3.
SAFM00.Y- appeared in games released around January-February 2016.
4.
SAFM001B- released on December 15, 2016, this firmware is discussed in this article.
5. SAFM02.H- present in new SSD revisions, this firmware is newer than SAFM001B.
What is needed for the firmware? Computer or laptop with SATA interface 2 or SATA 3. If your PC/laptop only supports SATA 2, then make sure that it is available in the BIOS AHCI mode, since not all motherboards with SATA 2 support AHCI mode.
Also, you will need any USB flash drive of 2 GB or more, or a DVD and a working DVD drive in your computer. You can flash it from a DVD, but I recommend flashing it using a USB flash drive, as this option is more reliable and faster.
Important!
- Before starting the firmware, it is recommended to do backup copy important data from the SSD, to avoid data loss in case of unsuccessful firmware!
- Your SATA controller must be configured for AHCI mode in the BIOS.
- When updating firmware, your SSD must be connected to the native one (built into motherboard) SATA port of a computer/laptop! Do not use SATA adapters/adapters from third-party manufacturers.
- If you plan to flash on a computer, it is recommended to use a UPS (source uninterruptible power supply) to avoid sudden shutdown electricity during firmware.
- If you plan to flash on a laptop, then make sure that the laptop's battery is charged and the power adapter is connected to the laptop to avoid a sudden power outage during the flashing.
FIRMWARE SOFTWARE AND FIRMWARE UPDATES ARE PROVIDED AT KINGSTON'S DISCRETION FOR CERTAIN KINGSTON PRODUCTS. THE FIRMWARE SOFTWARE AND FIRMWARE SOFTWARE UPDATES ARE PROVIDED "AS IS" AND ARE USED AT USER'S SOLE RISK, WITHOUT ANY WARRANTY, REPRESENTATION OR REPRESENTATION BY KINGSTON.
KINGSTON DISCLAIMS ALL SUCH WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY, WITH RESPECT TO THE FIRMWARE SOFTWARE AND FIRMWARE SOFTWARE UPDATES INCLUDING, BUT NOT LIMITED TO, WARRANTIES OR CONDITIONS OF QUALITY, PRODUCT PERFORMANCE, NON-INFRINGEMENT OR WARRANTY, WARRANTY OF MERCHANTABILITY OR CONFORMITY PURPOSE.
KINGSTON DOES NOT WARRANT THE CONTINUOUS, UNINTERRUPTED OR UNINTERRUPTED AVAILABILITY, SECURITY, ACCURACY, COMPLETENESS OR ERROR-FREENESS OF THE FIRMWARE SOFTWARE AND FIRMWARE SOFTWARE UPDATES, INCLUDING WITHOUT LIMITATION THE ACCURACY OR COMPLETENESS OF ANY INFORMATION, TEXT, GRAPHICS, LINKS OR OTHER ELEMENTS CONTAINED IN SOFTWARE.
WHEN YOU DOWNLOAD ANY FIRMWARE SOFTWARE AND/OR SOFTWARE UPDATES, THERE ARE NO LICENSE GRANTED TO ANY INTELLECTUAL PROPERTY RIGHTS, EXPRESS OR IMPLIED, ARISING FROM CONCLUDING CONTACTS BY THE ATTENDANT HOLDER OR OTHERWISE EXCEPT AS PROVIDED ABOVE.
BY DOWNLOADING THIS SOFTWARE, THE USER AGREES TO THE ABOVE TERMS AND CONDITIONS.
Flashing the SSD.
1. Download the ISO image with KC400/SHSS firmware from this link. The file weighs 773 MB.2.
Burn this ISO image to a DVD or create a bootable USB flash drive with this image. There are many different programs for burning images to CD/DVD and creating bootable flash drives.
To create a bootable flash drive, Kingston recommends using free program Rufus: https://rufus.akeo.ie/
3. Boot from your bootable flash drive or DVD and select "live – boot the Live system" by clicking Enter key. The mini-OS will load on Linux based.
4.
Follow the on-screen prompts to update the target SSD's firmware.
There you just need to enter the number of the disk that you are going to flash (usually number 1, if the system has one SSD supported for flashing) and press the Enter key.
5.
Update the firmware. When the firmware is successfully updated, you will see on the screen:
a. The SSD Firmware has been updated on drive
b. Power cycle is required to see and use the new code.
6. Turn off your computer/laptop. It is advisable to disable it through the button in the lower left corner (analogous to the Start button), selecting System - Power Off there.
7. Turn on your computer/laptop and start using it as usual.
This is the boot screen you should see if you correctly recorded the image on a USB flash drive or DVD.
 |
| Loading screen, there you need to select the first item. |
In this small window you need to enter the number of the SSD supported for firmware and press Enter.
 |
| Selecting the drive number for firmware. |
I have already flashed my SSD, the “flight” is normal. It feels like the SSD began to work a little faster. Also, I saw several reviews on forums and in groups that several people upgraded to this firmware and are not complaining.
That's all, successful firmware, thanks for your attention!
Was the article useful? Then support the author with a pretty penny
, contributing any amount to the development of the blog.
About the benefits using SSD disk, I think it’s not worth talking about (many people have already said it, and I wrote in previous articles). The main thing I would like to focus on is the stability of the SSD drive, which is directly related to the installed software for it (unlike hard drives(SATA, IDE) SSD drives have firmware)
Firmware is the contents of the non-volatile memory of a digital computing device (in in this case SSD disk) - which contains its firmware (built-in software) ensuring its operation.
Since firmware is created (written) by people, they have flaws or problems that appear after the release of the SSD drive. In order to correct errors in the firmware code, it goes out next version The firmware is already with fixes. Therefore, it is recommended to update the firmware after a new one is released (this applies not only to SSD drives).
Well, now, essentially, we have an Intel 520 SSD - the disk is new, and before installing the operating system there, I wanted to update the firmware on it. As it turned out, Intel SSD supports two ways to update the firmware:
1 Firmware update without operating system or any of the installed ones - Linux, Mac OS, Mac OS X, Red Hat Linux, SUSE Linux, Turbolinux, Windows 7, Windows 8, Windows Vista, Windows XP.
2 Firmware update with the Windows operating system installed (Windows 7, Windows 8, Windows Vista, Windows XP).
I suggest considering both of these methods.
Updating the firmware of an Intel SSD without an operating system or with any of the popular ones (Linux, Mac OS, Mac OSX, Red Hat Linux, SUSE Linux, Turbolinux, Windows 7, Windows 8, Windows Vista, Windows XP).
For this method you will need:
2 USB flash drive or CD/ DVD disc
3 Computer/laptop with an SSD drive connected to it.
First of all, you need to write down ISO image to a USB flash drive or CD/DVD disc. How to burn an image to disk is written in the article - How to burn to CD/DVD/Blu-ray disc I recommend using Ashampoo program, in it select “Disk image” - “Burn disk image”.
If you want to update the firmware using USB flash drives you need to burn the image to a flash drive. To do this, first of all transfer all necessary information With USB media, since in the future it will be formatted and all information on it will be deleted. For ISO recording image to a flash drive, you can use the methods described or using the program Universal USB Installer . The advantage of this program is that it is free and does not require installation, just run the downloaded file and read license agreement and agree to its launch.
Next, select “Try Unlisted Linux ISO” in the first item (located at the very bottom of the list), Then specify the path to the downloaded ISO image and select the media on which you will write the firmware. Click the "Create" button.
After a short registration process you will receive bootable iso image. Next, you need to boot from a USB flash drive, as described in the article - How to boot from a CD/DVD disk or USB flash drive .
The first thing you will see is the License window, read and click “Accept”.
After that, you will see your disk and the opportunity to update the firmware (in this case, it was installed latest version No firmware or update required)
This is what the window looks like when you need to update the firmware.
If your disk is exclamation mark then a firmware update is required. If the icon is a green checkmark, then the latest firmware version is used. If there is a red cross, this update is not suitable for your disk.
Updating the firmware takes a few minutes. After this, restart your computer/laptop; this will complete the process of updating the Intel SSD firmware.
Updating Intel SSD firmware from Windows (Windows 7, Windows 8, Windows Vista, Windows XP).
In order to update the firmware of an Intel SSD drive from the operating system Windows systems, necessary download the firmware installer file . After that, run the downloaded EXE file and install the Intel SSD firmware update utility. Installation consists of clicking the "Continue" button several times. After installing the program, the “Intel SSD Toolbox” shortcut will appear on your desktop, launch it.
This program allows you to optimize SSD operation disk and update its firmware. To do this, select the "Update hardware and software" button.
If you do not have latest version firmware, you will have an active “Update” button, clicking on which will start the process of updating the firmware of the Intel SSD drive.
SSD firmware drives is necessary to speed up the speed of its operation, as well as to improve stability, and this will allow you to get rid of many difficulties when connecting and configuring the drive.
Before flashing the firmware, make sure that there is no important data on the disk, as you can lose all the data on the SSD. If you have on disk necessary information, copy it first. Next, you should obtain the firmware version that is current for your drive model. Download the firmware from the official website for your SSD model.
In this case, pay attention to the disk space for which the firmware is intended. To find out what firmware version is running on your solid state drive, use the program CrystalDiskInfo. With this program, you can also check the disk parameters before flashing the firmware in order to compare them later. Also, if possible, read reviews about new version firmware. Also, from the official website, download instructions for flashing the firmware of your SSD drive.
The firmware should be installed slowly, carefully following the instructions. Please note that many manufacturers provide a guarantee that information from the disk will not be lost. But it is still recommended to make a backup copy, especially of important information.
To install the firmware, you will need a 4GB flash drive or CD/DVD disk, since the firmware is installed from the boot disk. After signing up for boot disk(flash drive) required version firmware, boot from this disk and follow the instructions. The firmware itself takes a little time. After flashing the firmware, you should restart your computer.
After flashing the firmware, run CrystalDiskInfo program and check the information about installed firmware, as well as disk parameters. Compare the disk parameters with those that were before the firmware. If something goes wrong, errors appear in operation, or an unexpected failure occurs, return to previous version firmware, which you can also download from the official website.
If you yourself cannot cope with such a task, it is better for you to get help; ignorance is usually punishable!
I don’t think it’s worth talking about the advantages of using an SSD drive (many people have already said it, and I wrote in previous articles). The main thing I would like to focus on is the stability of the SSD drive, which is directly related to the installed software for it (unlike hard drives (SATA, IDE), SSD drives have firmware)
Firmware is the contents of the non-volatile memory of a digital computing device (in this case, an SSD disk) - which contains its microprogram (built-in software) that ensures its operation.
Since firmware is created (written) by people, they have flaws or problems that appear after the release of the SSD drive. In order to correct errors in the firmware code, the next firmware version is released with corrections. Therefore, it is recommended to update the firmware after a new one is released (this applies not only to SSD drives).
Well, now, essentially, we have an Intel 520 SSD - the disk is new, and before installing the operating system there, I wanted to update the firmware on it. As it turned out, Intel SSD supports two ways to update the firmware:
1 Firmware update without operating system or any installed one - Linux, Mac OS, Mac OS X, Red Hat Linux, SUSE Linux, Turbolinux, Windows 7, Windows 8, Windows Vista, Windows XP.
2 Firmware update with the Windows operating system installed (Windows 7, Windows 8, Windows Vista, Windows XP).
I suggest considering both of these methods.
Updating the firmware of an Intel SSD without an operating system or with any of the popular ones (Linux, Mac OS, Mac OSX, Red Hat Linux, SUSE Linux, Turbolinux, Windows 7, Windows 8, Windows Vista, Windows XP).
For this method you will need:
2 USB flash drive or CD/DVD disk
3 Computer/laptop with an SSD drive connected to it.
First of all, you need to burn the ISO image to a USB flash drive or CD/DVD disc. How to burn an image to disk is written in the article - How to burn to CD/DVD/Blu-ray disc I recommend using the Ashampoo program, in it select “Disk image” - “Burn disk image”.
If you want to update the firmware using a USB flash drive, you need to write the image to the flash drive. To do this, first transfer all the necessary information from the USB drive, since in the future it will be formatted and all information on it will be deleted. To write an ISO image to a flash drive, you can use the methods described or using the program Universal USB Installer . The advantage of this program is that it is free and does not require installation, just run the downloaded file, read the license agreement and agree to launch it.
Next, select “Try Unlisted Linux ISO” in the first item (located at the very bottom of the list), Then specify the path to the downloaded ISO image and select the media on which you will write the firmware. Click the "Create" button.
After a short burning process, you will receive a bootable ISO image. Next, you need to boot from a USB flash drive, as described in the article - How to boot from a CD/DVD disk or USB flash drive .
The first thing you will see is the License window, read and click “Accept”.
After this, you will see your disk and the opportunity to update the firmware (in this case, the latest firmware version was installed and no update was required)
This is what the window looks like when you need to update the firmware.
If your disk has an exclamation mark, then a firmware update is required. If the icon is a green checkmark, then the latest firmware version is used. If there is a red cross, this update is not suitable for your disk.
Updating the firmware takes a few minutes. After this, restart your computer/laptop; this will complete the process of updating the Intel SSD firmware.
Updating Intel SSD firmware from Windows (Windows 7, Windows 8, Windows Vista, Windows XP).
In order to update the firmware of an Intel SSD drive from the Windows operating system, you need download the firmware installer file . After that, run the downloaded EXE file and install the Intel SSD firmware update utility. Installation consists of clicking the "Continue" button several times. After installing the program, the “Intel SSD Toolbox” shortcut will appear on your desktop, launch it.
This program allows you to optimize the operation of an SSD drive and update its firmware. To do this, select the "Update hardware and software" button.
If you do not have the latest firmware version installed, you will have the “Update” button activated, clicking on which will start the process of updating the Intel SSD firmware.