Lenovo smartphone does not load beyond the logo. Why your Lenovo phone may not turn on and how to fix it

Android users often encounter problems when turning on their device. That is, when you try to turn it on, it simply freezes, showing either the logo of the device manufacturer or a green robot. This instantly lets us know that there has been a failure in the system, most likely caused by an incorrect installed application, or an unsuccessful attempt to gain root access to your device. Or it’s much simpler: your device is attacked by viruses. In some cases, the device may not boot when the memory is full. To do this, just go to boot menu, and clean up the files there ( To enter the menu, when turning on, press the power and volume buttons simultaneously).
Having learned about the breakdown, the search immediately begins for what to do if the android freezes when turned on. There are two ways to solve this problem.

Easy way

The first way is to protect your information and try to save it. The devices have secure entry. To do this, when you turn on, on the second boot screen you need to hold down both volume keys and hold them until it loads completely. Then copy the files, or fix the problem, that is, remove the malware. In the article, read about Antiviruses for tablets.

Back to factory settings

If the first method turned out to be useless, and the question of what to do if the Android freezes when you turn it on is not resolved, then there is a radically strong-willed solution to roll back the device to factory settings, but all data and everything that was on your device will be deleted.

To do this, you need to turn on hold down the volume button(usually the volume up button, but on some devices this is the volume down button), and power button. After vibration, release the power key and hold down only the volume. In the menu that appears, find the option “ Settings» (Setting) and select (the menu is switched using the same volume keys). Next, click on “ Format System", and only after that perform the action " Reset Android «.

Conclusion

Now you know what to do if your Android freezes when you turn it on. However, you can take a simpler route; if you have root rights, it is better to make a restore point for the device in advance, and after a breakdown, simply roll back to the last restore point. Read about this in the article. This will significantly reduce the loss of information and protect your files in a more complete form.
ATTENTION! This process is irreversible; before doing this, consider all options for solving the problem.

Let's look at it in order: first about the reasons, and then what to do. Some problems can be solved on their own, while some will have to be addressed to a service center.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Causes of failure and why it turns on but does not boot

⭐️⭐️⭐️⭐️⭐️ If Android does not load on your phone or tablet when you turn it on, or your Android smartphone starts but does not go beyond the logo splash screen, then the reasons for this may be the following:

• Errors when flashing the device. These include installing an inappropriate or damaged assembly, out-of-order firmware, power failure, and other factors.
• Lack of memory. The system may not start due to lack of memory. The solution may be to delete unnecessary data.
• Incompatible with memory card. If your smartphone turns on but does not boot completely, try removing the memory card and trying to restart the system.
• Hardware problems that occur after impact, fall, liquid ingress, or exposure to extreme temperatures.
• Damage to the power button or its cable, which “shorts” the phone and it goes into a cyclic reboot, loading up to the logo and then in a circle. We encounter this from time to time and can only be diagnosed at a service center.

Before you try to troubleshoot Android, you need to understand why the system won't boot.

Restoring functionality

If the phone shows that the charge is going on, then the causes of the problem must be looked for in the operation Launcher Android. If your device vibrates or its screen flickers, there is a possibility that the screen is damaged.

If you determine that the problem is software in nature (for example, the problem arose after a firmware update), then a simple reboot will not help. You need to reset the system via Recovery Mode or reflash the device. Let's see what to do:

1. While holding down the power button and the volume down key (there may be other combinations, look for your model), go to Recovery Mode. If the phone is , then the problems are at a deeper level, so you need to contact a service center.
2. Perform a factory reset by selecting "Wipe" data factory».
3. Select "Reset" to reboot the device.

This will delete the user's personal data and settings. If this method does not help, perform a flashing. To do this, upload the file with the appropriate firmware to the root of the memory card, insert the drive into the phone and select “Install zip from sdcard” in Recovery Mode.

Increase

WITH software glitch You can do it yourself, but how to fix hardware problems? The most reasonable option is to contact a service center for diagnostics and repairs.

Extracting information from a broken Android

Even if the problem can be solved without financial investment, by simply flashing the firmware, users experience important question— how to save data stored in the phone’s memory. There are no problems with the memory card: you just need to remove it from the device. But how to save data from internal storage? For example, pull out contacts.

Increase

If you did backup copy system or at least, then it will be very easy to get contacts. All you have to do is go to the Contacts app on the Google website to see full list synchronized contacts. If you want to transfer them to another device, all you need to do is add Google account.

Increase

To make it just as easy to get other information, you need to periodically make backups. copy of Android. Then if

As a result of hardware failure or OS malfunction, any Android smartphone may stop responding to the power button. Another common problem is when the phone does not turn on beyond the screen saver. At the same time, you can see on the screen the logo of the manufacturer or the standard “green robot” of the Android system, but then nothing happens.

If the gadget is stuck on the screensaver, there are 4 main reasons for the defect:

1. Critical hardware failure as a result of water getting into the case, overheating of the board, or a strong shock. In this case, Android may start loading and finally fail.
2. Incorrect actions when installing custom firmware, resulting in failure operating system.
3. The memory card is incompatible with the device.
4. An insufficient amount free memory, slowing down the switching process. In this case, the phone boots, but very slowly: within 3–5 minutes.

Phone stuck on startup screen

What you definitely shouldn’t do is disassemble the case yourself in an attempt to determine the cause of the breakdown. Without the appropriate skills, you can not only lose the warranty, but also completely “kill” the device. If you accidentally flood or drop your gadget, contact an official service center or a reliable technician for help.

We take out the memory card

Be sure to remove the memory card from the device. Almost half of all startup glitches are caused by this small memory chip. How to do this correctly, see the instructions for the device, universal method not here.

How to determine if the battery is good

A common cause of problems is battery failure. It is quite easy to determine the defect: if, when connected to the power adapter, a charging icon appears on the screen, increasing the charge level over time, everything is fine. But if, when you disconnect the charger, the gadget completely stops responding to button presses or refuses to charge, there is probably a problem with the battery or power connector. In this case, the only correct solution is to contact the manufacturer’s service center. For example, for owners of the line Samsung Galaxy warranty service held at Samsung centers.

Virus infection

Quite a rare reason serious damage. In this case, there may be extraneous pictures on the smartphone screen instead of the download icon.

Solution: check third-party antivirus by connecting your smartphone to your PC.

If you suspect that malware has entered your system, you can try to find information on removing specific types of viruses on the forums of well-known developers of antivirus products: Dr. Web, Kaspersky and Nod32.

Software malfunctions

Most common reason Freezes when Android does not load beyond the logo. To fix the problem, try entering Recovery Mode:

• For Samsung Galaxy with Bixby button - hold down the power switch, volume up and Bixby at the same time. When appears on the screen Samsung inscription, release the power.
• For other Samsung gadgets - press the volume up and down buttons, as well as the lock button, then wait for the download icon to appear.
• LG - hold down the volume down and power control, release after turning on the screen.
• HTC - instructions are identical to LG devices.

After hitting Recovery menu, which is navigated using hardware buttons, you can take the following actions:

• Clear cache by selecting Wipe Cache Partition using the volume rocker and lock button.
• Produce full reset to factory settings, deleting all data. The Wipe Data/Factory reset option is responsible for this action. Please note that this action will delete all your data and return the device to its factory state.
• After execution necessary settings, select Reboot System Now to attempt a reboot.

If the above steps did not help, all that remains is to flash the device manually using a computer and special programs. For example, for Samsung it is the Odin utility. For each device, the instructions and firmware themselves are different, necessary information You can find it specifically for your phone on the forums.

Conclusion

The smartphone freezing during the loading process can occur due to the most various reasons. In some cases, it is possible to solve the problem on your own; in others, only contacting a service center will help. Repair cell phones is not an easy task, and it should be trusted only to proven professionals. You should not look for help at the nearest market or try to disassemble the device with improvised means - this will only cause harm and void the warranty. To avoid similar breakdowns in the future, remember a few simple rules:

• Do not flash your smartphone with Chinese “left” firmware without sufficient experience.
• If you find a defect, do not panic and do not try to disassemble the device.
• Use antivirus software and regularly scan your smartphone for malware.

Video

In our world, people can no longer imagine life without a smartphone. He became an extension of our hand. For most people, the breakdown of their favorite gadget will cause panic and hysteria. This, of course, is not very good, but you have to put up with it. Modern mobile devices- very capricious things. Sometimes they behave unpredictably. In order not to be left without communication, you need to know what to do with the device if it suddenly “kicks up” and does not react in any way to the user’s actions. The most common problem with gadgets is that the phone does not turn on beyond the splash screen. What can you do to revive your “pet”? Let's try to answer this.

Possible causes of failure

There are several reasons for this behavior of the smartphone. And depending on them, the decision on repairs will be made. The first (and most common) reason that the phone does not turn on beyond the Android screensaver is a failure during the installation of an operating system update. This happens because the Android OS is not very stable. That's not so bad. However, the same result can occur after the device is dropped from a considerable height. This is much worse.

Also common reasons may be a malfunction of the battery, charger, or the gadget charging connector itself. Now let's look at the screensaver. In most cases, you can fix everything yourself. Fatal breakdowns are extremely rare. But at the initial stage, the main thing is to correctly diagnose the problem in order to avoid making mistakes in the future.

System failure

This is the safest thing ever. If the operating system crashes, you need to go into recovery mode and reset the factory settings with clearing the cache. Be careful! After this procedure, there will not be a single third-party application left, user installed. You can enter recovery by simultaneously pressing the volume up button and the power button. True, for various models devices can be different combinations. Then you need to go to the point Wipe data and factory reset and confirm your choice. Then you need to check the box Reboot system now. after this the phone will reboot. If everything is fine, then the reason why the phone does not turn on further Lenovo screensavers, was precisely a system failure.

Sometimes resetting to factory settings doesn't help. Then there is another option. You just need to reflash the phone. It's not that hard to do. The Internet is full of instructions for each specific smartphone. And at any adequate forum they will be happy to help you implement your plans. Don't lose heart.

If the reason is the battery and charging

You can check this very simply. It is enough to find a similar battery somewhere and similar Charger. If, after replacing all the components, you do not see any changes, then the reason is that HTC phone does not turn on beyond the splash screen, much deeper than you thought. There are only two options: damage to the charging socket or the board itself.

Dealing with a faulty battery or a “glitched” charger is easy. These are not particularly expensive smartphone components. They can simply be replaced with new ones. The problem with the hardware board will be much more noticeable. Here (in most cases) you can’t do without a visit to the workshop. Sometimes you have to pay a very significant amount for repairs.

If the reason is in the board and hardware

It is very difficult to do something about this on your own. You need to have some knowledge of radio electronics and own the appropriate tools. If you have all this, then you can easily solve the problem. But if the phone does not turn on beyond the splash screen for a reason faulty board, and you don’t understand anything about this matter, then it’s better to take the gadget to a service center. Because by arranging repairs on your own, you risk turning your device into a dead brick.

You can try to find a familiar specialist who repairs smartphone hardware and save on repairs. But it is unlikely that he will resuscitate your device for free. Only if this is a very good friend. But, in any case, you will have to spend money on the Magarych. And it is unknown how much this will cost.

Summary

Now you know the main reasons behind the screen saver. There are ways to combat this unpleasant phenomenon. Unless it's a hardware problem. But, as statistics show, in most cases this problem is caused by a failure of the operating system. And eliminating this annoying misunderstanding is very simple with the help of a few buttons.