SIM card in Samsung Galaxy S8 - usage guide. Self-installation of a SIM card in the Samsung Galaxy A5 How to insert a SIM card into the Samsung galaxy s5


Replacing the SIM card of the Samsung Galaxy S4 is a task that seems difficult and overwhelming considering the new MicroSIM standard used in the handsets of this model. Users who are accustomed to solving communication problems by rearranging the SIM card, as well as retrogrades who change the operator or phone number by purchasing a completely different card, are confused when faced with this problem. We will teach you how to remove and insert a Samsung S4 SIM card at home.

Instructions

This instruction consists of five steps. You will need a special plastic spatula, long nails or some comfortable and soft thin object with which you can pry up some parts.

Step 1: Pry off the left edge of the back cover of the Samsung S4 with your fingernail or a spatula. A special connector for this is located at the level of the main camera and the power button.

Step 2: Insert a plastic spatula into the gap that has now formed and slide it from left to right, unlocking the latches sequentially (these latches are located along the entire perimeter of the inside of the telephone case). At the moment when the back cover has completely come away from the case, remove it and set it aside.

Step 3: After removing the back cover, be sure to remove the memory card from the special slot located directly under the main camera of the device:

  • Lightly press the edge of the memory card until you hear a characteristic click.
  • Remove the spatula or finger from the card - a click precedes the automatic ejection of the memory card with its retaining tray.
  • Once this happens, remove the memory card and carefully place it in a place where it will not get lost.
  • When assembling the Samsung S4, insert it following the steps in reverse order.

Step 4: Pry up the phone battery, remove it and set it aside.

Step 5: To remove the Samsung Galaxy S4 SIM card, press it inward as you did with the memory card:

  1. You need to press carefully until you hear the familiar click.
  2. When you hear a click, release the holder so that it can automatically pull the tray out of its slot.
  3. When the SIM card tray appears completely, it’s time to remove the SIM card from it.
  4. Now you can insert another card into the slot and put the phone back together.

As you can see, MicroSIM is no more difficult to use than the most ordinary SIM card - there was nothing to be afraid of!

Samsung Galaxy S7 and Galaxy S7 Edge mobile phones work with Nano SIM cards. Therefore, if you bought this device to replace an outdated mobile phone, you will most likely need to change the SIM card at a customer service point or independently format the card into the desired format. Many users choose the second option, since contacting a service center may be associated with certain difficulties. Let's look at how to cut and install a SIM in a Samsung Galaxy S7.

Procedure for cutting SIM cards for Galaxy S7

NanoSIM is a relatively new format for SIM cards. It first appeared in the iPhone 5 and is still used in all Apple devices. A little later, smartphones from the Samsung Galaxy line began to be equipped with Nano-type card holders. This approach made it possible to reduce the size of mobile devices and make them more convenient to use.

If your previous gadget worked on a Mini- or Micro-SIM, then before inserting such a SIM card into the Samsung Galaxy S7, it must be cut correctly. To perform the upcoming work, prepare the following tools and materials:

  • cutting template (you can download it from the Internet and print it on a printer);
  • thin scissors or stationery knife;
  • scotch;
  • thick rags or fine-grained sandpaper.

The procedure for cutting a SIM card to Nano format is as follows:

The NanoSIM card is ready for further use.

Installing a SIM card in Samsung Galaxy S7

Installing a SIM card in the Galaxy S7 is done in the following sequence:


If you cut a SIM card yourself, there is a small chance of damage to its microcircuit. Therefore, if your smartphone does not want to accept the card, replace it with a new one at your operator’s subscriber service center.

Report content

It would seem that placing a SIM card in the Samsung Galaxy S7 is not so difficult. However, it is not surprising that new smartphone owners who have switched to this model from other, earlier ones have a similar question. The fact is that, starting with the Galaxy S6 line models, Samsung decided to combine a slot for SIM cards and microSD cards. As a result, the phone body became monolithic, and the cards acquired a new location. And if previously it was enough to simply remove the cover of the smartphone and insert the SIM card into a special recess, now you can rack your brains quite a bit before finding the right compartment and placing the card there.

How to insert a SIM card into Samsung Galaxy S7

If your device is in active mode, we advise you to first turn off the device. This will prevent the possibility of various errors appearing in the operation of the gadget in the future.

Video for clarity

How to remove a SIM card from the slot

In order to perform the reverse operation, that is, remove the SIM card from the device, you need to perform the following steps:

  1. To avoid data loss or incorrect phone operation, first turn off your device.
  2. Take the key that came with your Samsung Galaxy S7, or a regular paperclip. Don't forget to straighten it first. Insert a key or paper clip into the special hole in the SIM card tray cover. Apply light pressure and when the tray comes out a little from the body, pull it towards you.
  3. Once you have the card slot in your hands, remove the memory card or second SIM card (if installed) from it.
  4. Then you can pull out the desired SIM card. When performing these steps, be careful, because rough handling of the equipment can damage the contacts and lead to improper operation of the device.
  5. Once you have removed the SIM card, carefully place the card tray back into the phone. To do this, you just need to insert it with the correct side into the slot and press down a little so that the tray is fixed in the body.

In the end, it turned out that inserting a SIM card into the Samsung Galaxy S7 is actually not that difficult. It is enough to know where the card slot is located, as well as be a little patient and careful during installation.

When developing the Samsung Galaxy S6, the Korean manufacturer decided to abandon metal- and leather-like plastic in favor of an aluminum frame and glass back panel. As a result, the smartphone turned out to be quite attractive and began to really look like a flagship device, and not like a cheap Chinese something. Since the phone body turned out to be monolithic, the engineers had to move some elements that could be accessed in previous flagships simply by removing the cover. Thus, the SIM card slot was moved to the side panel under the power button and acquired a tray. Unfortunately, not everyone who wants to purchase the Samsung Galaxy S6 knows about this move. Therefore, we devoted this short article to the question: how to insert a SIM card into the Samsung Galaxy S6.

How to insert a SIM card into the device

The SIM holder can be found on the right side of the mobile device through a small hole. To insert a SIM into it, you need to do the following:

  1. Find an ejector, commonly referred to as a paper clip. It is usually included as standard with a smartphone.
  2. Insert it into the hole and lightly press it inward.

    Inserting the ejector into the SIM holder hole: try to do it as smoothly as possible

  3. Carefully pry and remove the holder.
  4. Place a SIM card in nanoSIM format. It is advisable to use a card issued by the operator, and not cut off yourself, so that no conflicts arise between it and the smartphone during operation.

    Correct placement of nanoSIM in the holder

  5. Place the holder in the compartment so that the hole in the “ear” of the tray is near the power button.

How to remove a SIM card from the device

  1. Insert the ejector into the hole in the tray and press it inward.
  2. Carefully remove the SIM card tray and remove it.

Samsung decided to listen to the opinions of its fans and returned memory card support to the new flagship devices Galaxy S7 and Galaxy S7 Edge. However, she did this using a hybrid slot, as has become fashionable recently. This means that the user must choose whether to use 2 SIM cards or one SIM card and a microSD card in the smartphone. Fortunately, there were craftsmen who discovered that the contacts of the second SIM and the contacts of the memory card are in different places and managed to combine business with pleasure and organize the simultaneous operation of two SIM and microSD cards. And if you have decided to become the owner of a new device (or have already become the owner), despite all its minor disadvantages, then this article is for you. We are publishing a translation of instructions with detailed comments on installing two SIM cards and a memory card in the Galaxy S7 and Galaxy S7 Edge.


Denial of responsibility: You do all the manipulations listed below only at your own peril and risk. Neither the author nor anyone else is responsible for your actions or for any damage caused. There is a high probability of damaging the SIM card microchip, and to a lesser extent, the microSD memory card. Also, when the smartphone heats up, there is a danger of this structure coming off, and in this case problems may arise when removing the tray. It is quite possible that you will have to contact a service center to get it. In this case, the device is removed from warranty.

So, if you are aware of all the risks listed, then to continue you will need the following devices:

  • SIM card in Nano format (because it is easier to cut and “disassemble”)
  • microSD memory card
  • Lighter
  • Scissors, blade or any other sharp object
  • Thin double-sided tape (preferred) or super glue
  • A little free time, patience, a head on your shoulders and straight arms

To install two SIM cards and a memory card at the same time in a Samsung Galaxy S7 or Galaxy S7 Edge, you need to:

  • Determine the correct position of the SIM card
    First, you will need to determine the correct position of the SIM card in the tray. Cards from different operators may have different contact configurations. The author of the original instructions carried out operations on SIM cards of U Mobile and Maxis operators (Malaysia). Typically, all SIM cards have a special key on one side (cut corner).
  • Detach the SIM card chip from the base
    Any SIM card consists of a plastic base and a microchip with a contact pad glued to it. Gently heat the SIM card from the opposite side (where the plastic is). This may take from 30 seconds to 1 minute. Then carefully separate the chip with the contact pad from the base. It is recommended to use a sharp object (scissors, knife, blade, etc.) as an auxiliary tool. After this, the chip must be cleaned of any remaining glue or plastic.
    If everything went smoothly and you did not have to change the SIM card, then you can consider half the journey completed.

  • Trim SIM card microchip
    Now you need to carefully cut the contact pad of the SIM card to fit on the memory card. Usually you need to shorten it by 1-2 mm on each side (as in the photo).

  • Secure SIM card to microSD
    This can be done using double-sided tape (in which case the memory card can be easily (more or less) “freed”) or super glue (this option is less preferable, since if you damage the SIM card chip, then separate it from the memory card will be quite difficult or even impossible). The first step was provided for correct placement. In addition, make sure that the corner of the SIM card microchip is aligned as shown in the image (circled in red).

  • Place the finished structure in the tray
    Now all that remains is to place the genetically modified microSD card into the tray, and the tray itself into the smartphone.

Finally, you need to check that all actions have been performed correctly. If everything is done correctly, the Galaxy S7 will “see” two SIM cards and a microSD memory card. It will look something like this:

It is also worth noting that the method described above is suitable for all smartphones with the same hybrid SIM card tray. In particular, Meizu Pro 5 owners have a similar experience.


2024 gtavrl.ru.