I made the firmware but the camera does not turn on. Camera error: Could not connect to Android camera - what to do? Settings to improve the webcam in a smartphone or tablet

Hello everyone, dear readers, in today’s post we will try to figure out why the camera on the phone does not work. For many users mobile gadgets on the Android operating system occurs similar problem. There may be several reasons for this unpleasant incident. Below we will look at each of the reasons and try to fix this annoying error.

Reasons for the camera not working

1. Mechanical is the most unpleasant reason why your camera does not work. For example, if the camera stopped working as a result of the phone falling. A similar reason A non-working camera can only be fixed at a service center; I don’t recommend dealing with this problem yourself, because... you can only make it worse;
2. System error - in this case, the reason for the camera not working is an error in the Android operating system. For example, an outdated error. Below I will tell you how you can check and;
3. Viruses - some viruses that get into your mobile device, disrupt and block the operation of the camera - how front camera, so external camera. This problem can be solved by simply installing antivirus software and checking operating system. Below I will provide a list of antiviruses that you can use.

System update

To check for the latest updates for your operating system, do the following:

1. First of all, you need to launch the Settings application;
2. Now scroll to the very bottom of the page and select “About phone”, in this section you need to select “System update” and click on it;
3. If you did everything correctly, the system update process will begin.

Let's move on to the last reason for the camera not working, namely the presence of viruses on the phone.

Camera error. Failed to connect to Android camera- what to do? Most reliable way To get rid of camera problems, contact service center. But sometimes outside interference and spending substantial sums on repairs can be avoided. How?

When entering the camera, a system message like “Failed to connect to the camera” may appear on the screen, the screen may simply turn black, and the application may close spontaneously. If you encounter such a problem, first inspect the lens. New packaged gadgets have a camera protected with a special film; perhaps you simply did not pay attention to it and forgot to peel it off. If the gadget has been in your possession for a long time, pay attention to the presence of dirt. Visual inspection you can also detect the presence of mechanical “injuries” - such a situation will not happen without paid professional intervention.

1. Restart your phone and try logging into the camera again. Sometimes the problem goes away on its own.
2. Run a scan for malware on any antivirus and remove it.

Sometimes simply cleaning your phone helps. unnecessary programs and files. Clogged memory simply does not have room to perform simple basic operations.

Consider whether you have installed any new components on your phone. They probably have a negative impact on the camera's performance. If there are any, remove them and check if the camera works.

Perhaps you recently changed something in the settings menu and accidentally disabled access to the camera. Carefully review your phone settings; the problem may be hidden there too.

If the above manipulations are not effective, only a specialist will deal with your problem. To carry out proper diagnostics and quality repairs report all the important points about the operation of your gadget, list recent events that likely affected its operation.

Camera won't turn on on Android

When the camera on Android does not work, the system, as a rule, signals this with special system messages. It could be “Cannot connect to camera”, “Camera error” or a set of code characters. Try switching the camera mode from front to main and back. If the system warning is displayed in only one mode, most likely everything is normal at the hardware level, and one of the lenses or related spare parts needs to be repaired.

It also happens that the camera turns on, displays the image from the lens on the screen, responds to the display buttons, but does not save images and videos. Try deleting unnecessary things from your phone's memory, maybe the device just doesn't have enough free space to save. The problem may also be hidden in the settings, where the application is simply not allowed to save files on this device.

Users of inexpensive devices produced by small companies are more likely to encounter problems when using the camera.

Why can't I connect to the camera on my phone?

Let's look at the reasons why the camera stops working:

1. One of the reasons is a firmware update. If the camera fails after updating the Android version, the operating system should be rolled back and reinstalled.
2. Damage to camera setup modules. This result is caused by serious mechanical influences on the device, corrosion of the internals due to liquid ingress, fatigue failure on old equipment.
3. Virus programs. Can disrupt the correct operation of the camera malware, which easily get into the device’s computer if it is not protected by anti-virus applications.
4. The module cache is clogged.

How to solve this problem

You can try these methods:

• Clear cache. In settings, find the camera application, erase data and cache.
• Update your camera app. Perhaps its version is outdated and is not compatible with current firmware your phone.
• Try installing any other photo and video application. For example Camera Zoom FX. If it doesn't work, at least you will definitely determine that the problem is technical and not software in nature.

IN modern world The camera on your phone has become something that is almost impossible to imagine life without. Capture especially important point, scan the text, make a video call to loved ones. Far from it full list ways to use the camera on mobile devices. In many modern gadgets Manufacturers install two (or even three) cameras at once - front and rear. The first one is mainly used for communication or taking selfies. The second is for photographing the surrounding world.

Although today's technologies make it possible to create high-quality, reliable hardware for smartphones that should serve stably and for a long time, users may still encounter certain problems. When an average user discovers that the camera of his device has stopped working, he usually does not know what to do. Honestly, there can be many possible faults. With the help of this article we will try to analyze each one.

Rebooting your hardware is the first thing you should do when faced with a problem. incorrect work cameras. The gadget could simply have crashed or the application might have frozen. Sometimes such errors can be cured by simply turning the device on and off. After pressing the lock button, you should see context menu, where you need to select “reboot”. If a normal reboot did not give any positive results, you should be patient and try other methods, which will be discussed below.

Memory card

If the photography application does not launch, there is a chance that the problem is not even hidden in the phone itself. Check the integrity of the memory card on which photos and videos are automatically saved. Be sure to try inserting another memory card and starting the camera again.

The second step is to make sure there is enough free space for recording in the internal or external storage, because modern smartphones create pictures very high resolution, and this negatively affects the weight of media files.

Mechanical damage

There is always a possibility that the camera module itself has suffered mechanical damage (that is, a hardware problem). Lenses are the most vulnerable and fragile component of mobile devices. A mobile device may stop taking pictures after falling - under such circumstances, the module usually breaks or the cable cracks, the lenses break, or the light sensors are damaged.

But other mechanical damage is also possible: the cable connecting the lens module to motherboard, could burn out, moisture or dust could get into the lens, significant physical damage was caused to the gadget, after which failures and errors begin one after another.

In such a situation, attempts to cope with the breakdown on your own can lead to new ones. negative consequences for the device, therefore, all that remains is to contact a specialist or company that carries out certified repairs mobile technology. Fortunately, there are many of these today - in any major shopping centers You can find several “workshop islands” where the performance of your smartphone will be diagnosed in a matter of minutes.

Special programs

Of course, you shouldn’t rush into mechanical repairs right away, because the reason could still be software. First, you should try installing an alternative utility for the camera instead of the standard one in order to test the functionality of the old module on it. If everything works as it should in the new application, then the start of the malfunction is most likely the clogged cache memory of your device; to fix this, you just need to delete the old cache from the settings of your favorite application. To delete the cache you need

• go to “Settings”;
• select “Memory”;
• open “Application Data” and find the same utility for the camera among many others;
• Now all that remains is to click on “Erase data”;
• confirming your choice.

Reset to factory settings

The second most common software malfunction is an automatically installed update containing certain bugs that prevent the user from various reasons launch the camera. In this case, we return to factory settings.

• open “Settings”;
• We are looking for the item “Restore and reset”;
• Scroll through the menu to the very bottom, then go to “Reset settings”;
• select “Erase everything”.

Please note that after resetting the settings to factory settings, all files, passwords, contacts will be permanently deleted from your device, so do this first backup copy stored important information.

Viruses

Sometimes a faulty gadget should be checked for viruses. Perhaps they were the cause of all the troubles: open source Android OS has its own vulnerabilities that attackers can take advantage of, for example, blocking the operation of a mobile camera. On Google Play There is a lot of proven antivirus software (by the way, there is plenty of free one too). Download the applications you like, run the test, and wait for the result.

It must be taken into account that malicious files on the gadget itself has the ability to prevent correct operation security software, so it will be useful to connect your smartphone to a desktop or laptop to perform a more thorough virus scan using computer programs.

Flashing

The next method is to flash the device, which should absolutely help with the hardware failure of the smartphone. You can do it yourself, but you should be careful: a failure in data transfer or failure by the user to comply with all points of this operation can completely disable the phone. You can only download the firmware from official websites; only this guarantees a real signature of the new software license. Please note that after flashing your smartphone (even if purchased just a few days ago) will lose the mandatory warranty service from the service center.

Service center

When none of the above tips have brought the desired effect, do not despair: seek help from a qualified specialist or return your phone under warranty to a service center, where a free repair will be carried out. full diagnostics device and upon detection software malfunction it will be eliminated at the expense of the manufacturer.

Also, if a device is found to have a manufacturing defect that interferes with the correct operation of the camera, the faulty device will be replaced with a new one. It is important to understand that the warranty does not cover mechanical damage to the mobile device that occurred through the fault of the owner himself, that is, you have every right refuse repair or exchange.

Conclusion

So, this article listed all the possible causes of a phone camera malfunction. You should never despair and panic: as you can see for yourself, there are no hopeless situations - there is always a chance to return your favorite phone to full functionality. We hope that this material will remain nothing more than informational for you and you will never personally encounter the problem of the camera not working on your gadget. Happy shooting!

Video

The camera is an attribute of almost every smartphone and tablet, however, it does not always work as we would like. For what reasons does the camera not turn on on Android?

• Insufficient memory;
• Cache overflow;
• Inappropriate firmware from unofficial sources;
• Conflict between application algorithms that use the camera;
• Virus infection;
• Incorrect camera settings;
• Contamination or mechanical damage to the lens (water, falls, shocks, shocks);
• Low battery level;
• Minor malfunction;

In fact, all these problems are quite easily solved. The tips are suitable for both phones and tablets, as well as the main and front ones - so the tips are the same. First, make sure that there is no foreign object obstructing the image display. The camera is working, but the image is distorted or unclear? Look closely at the lens. Wipe the camera with an elastic cloth or paper napkin - it may be dirty. Is your phone new? Make sure there is no protective film. If there are cracks on the camera, you will still have to contact a service center for repairs. I would like to note right away that if there is a warranty, it will not be free, since the damage was caused as a result of insufficient care.

When you turn on the camera, do you see a black screen, text with an error, and the Android camera does not work and just freezes? So, first, reboot your phone - minor glitches could occur if the device worked for a long time without interruption. Is the camera ok again? These failures are especially common for users whose smartphones do not have a schedule for turning on and off. How to avoid such mistakes in the future: “Settings” – “Schedule on/off. nutrition."

Quit programs that may be using the camera. For example, a transparent screen.

Think about whether you have installed any applications to work with the camera? For example, filters, a program for creating images different from the standard one, utilities to improve its operation. They can be made with high quality, but if they do not fully suit your model or, together with other applications, they take up too many resources. Disable such programs through the application menu. Use standard remedy to take pictures. Was it deleted? Prefer what is not expensive in terms of resources and popular app cameras.

Do you doubt that the problem is in the program? Boot into safe mode. How to do it? Reboot your device. Press and hold the volume up/down button from the moment the welcome screen appears until the device turns on. If everything works, the message “Safe Mode” will appear. The camera still doesn't work as it should? So the reason is something else.

The camera does not work on Android after the firmware? Update the Android operating system as follows: go to “Settings” – “About phone” – “ Over-the-air update" If the version is custom, the developers probably did not take into account some features of compatibility with this phone or tablet model. You'll have to roll back to the original one or find a new unofficial one. I will describe how to return the factory OS after flashing. Recovery menu – “wipe data/facroty reset” – “ wipe cache partition” – “installzipfromsdcard” – specify the location of the backup. If you have not done so, search the Internet or other users. Take care not to catch the virus.

Why doesn't the camera work? separate application, for example, in Skype? The program may not be compatible with your version of the operating system. Make sure the app is allowed to use the camera. Reinstall the program in which the camera does not work.

Common Mistakes

Have you noticed low memory notifications? Remove extra files and applications, and also be sure to clear the cache - it takes up a lot of space, including temporary files of the application itself for creating photos. Don't know how to do this? Approximate path: “Settings” - “Applications”. Select programs one by one, and clear the cache (not to be confused with all the data - they can be important). After this, the camera should open and work.

Stop the camera from the application menu. Then open it again.

Have you downloaded anything from unverified sources? The device has probably picked up malware. software. Install one of the antiviruses. The highest quality of them is Anti AVL, Norton Security& Antivirus, Sophos Antivirus & Security, Bitdefender Mobile Security& Antivirus.

Camera turns on but doesn't save photos? Check your application settings. You may have chosen to save pictures to the SD card that is in this moment removed from the phone? In this case, the app may not allow you to take photos. The memory card may be in the slot, but damaged. To check this, make sure that the files from it are displayed. It is also possible that the device has run out of memory. Change the default storage location from your phone to your memory card or vice versa. To do this, go to “Settings” – “Memory” – “Default recording disk” – “Phone memory” / “SD card”.

The camera on Android does not open, for some reason it gives the error “Could not connect to the camera”? Perhaps it's the application that uses it. Clear the cache and data of this program. Remove its updates, if any. Force stop the application. There are camera updates in Play Market? Download them. Still writing about an error connecting to the camera? Try downloading another application from the Play Market. The highest quality ones are Open Camera, Camera JB+, Camera MX, Camera FV-5 Lite - all these programs are free. Reinstall the app if you are using a third party app to take pictures. After this, the message that the android could not connect to the camera should be resolved.

Does it say “An error occurred in the Gallery application”? In the application menu, stop (but do not disable) Gallery on your phone. Clear the cache and data, and if desired, first move photos and videos to another drive. Did not help? Reset the settings after saving the data. Contacts can be synchronized with your Google account.

Other reasons

Look at the charge level. On some devices this matters. If the battery level is less than 30%, the camera may not work. Connect the charger.

Reset settings to factory defaults. “Settings” – “Backup and reset”. Make a copy of important data on a memory card or other storage device.

Correct the train. For most users without experience and a set of special tools, this step is not recommended. You can look at the cable that connects the phone's motherboard to the camera. He could have just walked away.

Flash not working? Make sure that this mode activated Turning the flash on and off may help. Check your device for algorithm conflicts and synchronization errors using the Multi Cleaner application. Resetting and flashing also helps. To make sure the hardware is working properly, turn on another application that uses the flash. For example, a flashlight. If the flash does not work in the tested program, you will have to seek repairs. Some models do not have a flash at all.

Blurry camera focus? Moreover, this may not be observed near or far. Automatic and manual focusing don't help? Most likely, the lens has moved or is misaligned.

What should I do if the camera does not work on Android after following all the instructions? It makes sense to seek qualified services.

If the camera does not turn on on Android, then the causes of the problem may lie in software errors or problems at the hardware level. The user can cope with errors in the operation of the system on his own, but replacing a failed component will require the intervention of a specialist.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Possible reasons why the camera does not turn on

If you did not drop or hit your Android device, but at some point you discovered that the camera does not work, then most likely the reason for this is. It could be:

• Incorrect setting cameras.
• Application conflict.
• Lack of memory.
• Cache overflow.
• Virus infection.
• Incorrect firmware.

If everything is fine with the system, pay attention to physical state module. The camera may not turn on due to mechanical damage after an impact or fall, or contamination of the lens.

What to do

If the camera suddenly stops turning on, reboot your device. Restarting the system will help eliminate non-critical failures and return the application for taking photos and videos to a working state.

Increase

If the camera turns on but does not save photos, check its settings. Please note which save path is specified. It often happens that in the settings a memory card is selected that is currently removed from the device. Try resetting your camera settings to default (not all Android versions there is such an option).

Increase

Pay attention to the state of the memory: if there is no space, then there is nowhere for photos and videos to be saved. The problem may not be with the camera itself, but with the application that powers it. To fix errors, clear your cache standard program:

1. Open settings.
2. Go to the "Applications" section.
3. Select standard application"Camera".
4. Clear data and cache.

Increase

If the standard application does not work, download another program from the Play Market with camera functions. However, keep in mind that the presence of such an application may be the reason why the camera will not turn on. Try it different applications and configurations to understand whether they affect the performance of the module.

Another reason could be. To eliminate this option, install multiple antivirus utilities and scan the system. It will be useful to check the operation of the camera in a safe Android mode. If it starts there, but in normal mode- no, clean the system from viruses and suspicious applications.

Can be used . All data will be deleted from the memory, but you will know for sure that there are no conflicting or malicious applications on the phone.

Increase

If problems with the camera's operation arose after updating the system or flashing the device, then the logical solution would be to roll back to previous state. You will have to re-flash the device using a verified official build.