Tricolor TV receiver firmware for free viewing. Tricolor TV receiver firmware for free viewing Download update for 8302 tricolor

Facebook

Otherwise, anything can happen and in the midst of a holiday you can be left without your favorite show.

And so the software update via satellite, GS 8302 receiver.

Automatic software updates will last until January 25, 2015 inclusive; in the future you will be able to update yourself.

For the update procedure to take place correctly, you must turn on the receiver on the Tricolor TV Infochannel channel.
After a few seconds, a message will appear on the screen indicating the availability of a new software version.

When this message appears, confirm that the update will begin by clicking OK.

Before starting the update, go to the “Status” menu item and write down the values indicated in the lines “Receiver software version” and “Module software version”.

After completing the update, the receiver software version should change to 1.24.199, and the module software version should remain the same - 02.00.11.

ATTENTION! Do not turn off the power to the receiver until the update procedures are completed! Otherwise, the receiver may fail!

To update the receiver software, you must perform the following steps:

Unplug the receiver's power cord from the outlet, and then plug the receiver back in. Switch the receiver to the Tricolor TV info channel.

After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

When this message appears, select the “YES” option and press the “OK” button on the remote control.

If you want to delay the update process, select "No" from the message on the screen. You will be prompted to update the software again the next time you turn on the receiver. You will be able to install new software at any time convenient for you during the period from December 11, 2014 to January 25, 2015.

After agreeing to the update, service messages about the process of updating the receiver software will be displayed on the screen. The type of messages is shown below. The software update takes about five minutes.

Attention!

During the software update, do not turn off the power to the receiver! Otherwise, the receiver may fail!
After the software installation is completed, the receiver will reboot into the “Setup Wizard” mode.

At the first step of the “Setup Wizard” you will be asked to select a language, set the time zone and select “Operator”. In the “Operator” line you must set the value to “Tricolor TV” or “Tricolor TV-Siberia”, depending on the region where your equipment is installed.

Go through the remaining steps of the “Setup Wizard” and perform the Search for “Tricolor TV” channels, which will be launched in the last step.

After searching for Tricolor TV channels and saving those found, make sure that the receiver software version has changed to 1.24.199, and the module software version remains the same - 02.00.11.

To do this, go to “Menu” -> “Status” and check the value in these lines.

In addition to software updates, a software update for the Conditional Access Module CI+ module via satellite has been launched.

The automatic update will last until January 25 inclusive; in the future you will be able to update yourself.

For the automatic update procedure to take place correctly, you must turn on the receiver on the First HD TV channel or on one of the TV channels in the Basic MPEG-2 package.

After a few seconds, a message will appear on the screen indicating the availability of a new software version. When this message appears, confirm that the update will begin by clicking OK.

You can also update yourself through the CI+ module menu.

To do this, you need to turn on the receiver (or a TV with a built-in receiver) on the TV channel “Infochannel “Tricolor TV”, go to the “CI+ module settings” section and select software update. When a message appears about the availability of a new software version, confirm the start of the update by clicking “OK”.

To start the update, turn on the Tricolor TV info channel. After a few seconds, a message will appear indicating the need to update the module software (the appearance of the messages given in the instructions may differ from the messages displayed by your receiving device):

When this message appears, confirm that the update will begin.

If you refuse the update, you will be prompted to perform it again after rebooting the receiving equipment. You will be able to install new software at any time convenient for you during the period from December 11, 2014 to January 25, 2015.

Attention! If a message about the start of the update does not appear on the Tricolor TV Info Channel, you can start it manually. To do this, on the TV screen, go to the CI+ module menu and then open the “Settings” item. Select "download software" and follow the on-screen instructions.

After confirming the start of the update, messages will be displayed on the screen informing you about the update process. Once the update is complete, the module will automatically restart.

If this does not happen, you can reset the module manually by turning off the receiving equipment from the power supply and turning it on again. You can also remove the module from the CI+ slot and install it again.

Good luck, Friends!

Happy New Year!

Guide to updating the firmware of the satellite receiver Tricolor TV GS 8302 via satellite

Before performing the firmware, you need to find out the versions satellite receiver firmware and module (“Menu” => Status), make sure that the firmware version of a particular satellite receiver corresponds to version 0.20.30, and the module modification is 02.00.11. Upon completion of the flashing, the software version of the tricolor satellite receiver will change to 0.20.107.

New update on satellite receiver will be downloaded from the air.

Very important! Do not turn off the power supply to the satellite receiver until the firmware process is completed! Otherwise, the tricolor satellite receiver is likely to fail!

In order to update the satellite receiver software, you must do the following:

Turn off the receiver GS 8302 from the outlet, then reconnect the satellite receiver to the electrical network;
- leave the tricolor TV receiver on the “Tricolor TV” Information channel;
- after a while a sign will appear on the TV screen indicating the need to update the receiver software as follows:

If such a message appears, press the “OK” key on the remote control of the satellite receiver.

If you want to delay the satellite receiver flashing procedure, select “No” in the notification on the TV screen. You will be again recommended to reflash the software the next time you turn on the Tricolor TV satellite receiver. You have the opportunity to update the firmware of the Tricolor TV satellite receiver at any time suitable for you from 01/17/2013 to 02/17/2013.

After Confirmation for the update, service messages will appear on the TV screen about the progress of flashing the receiver software. The message type is shown below. The software update will take approximately five minutes.

Very important! While flashing the software, it is forbidden to turn off the power to the satellite receiver! Otherwise, the receiver may fail!

After the software update is completed, the satellite receiver will automatically turn off and then connect to the Tricolor TV Information Channel

After this, you need to make sure that the updates are installed correctly. To do this, find out the firmware versions by pressing the “MENU” key on the remote control of the satellite receiver and selecting “Status”. The line “Software version” should show “0.20.107”, and the line “Module software version” should show “02.00.11”

Then, when switching television channels, you will be recommended to update the list of channels and genres. Confirm updating the lists by clicking "YES".

Once the scanning of channels is completed, a sign indicating the successful completion of the scanning will appear. Click “OK” - the message will disappear. The firmware for the satellite receiver is complete. The receiver is ready for use.

The latest software is designed to improve the level of security of receiving equipment and guarantee the stability of its operation, as well as make its use when viewing channels and using additional services of Tricolor TV the most comfortable.

The Firmware has built-in the latest functionality in the interface of the Tricolor TV Cinemas service. Some keys have acquired auxiliary functions, for example, pressing the Red key activates the details of the selected movie, Green - ways to sort the list of movies (alphabetically, by genre, by nearby shows, by freshness in the schedule), Yellow - a list of movies that were staged time timer, Blue - a list of films that will become available for viewing when the repertoire is subsequently updated.

The "Status" menu has been changed. After updating the software of the satellite receiver, the client will have access to 2 types of data reflection:

The “Status” menu has been changed. After updating the software of the satellite receiver, the client will have access to 2 types of data reflection:

Brief (includes especially regularly used data, including information about the ID number of the Tricolor receiver) - this information is displayed when you go to the “Status” menu item;

Advanced (includes complete information about the tricolor TV receiver) - called by pressing the Red key (“F1” or “i”) on the remote control while in the “Status” menu.

In addition, the general list of television channels (displayed on the TV screen when you press the “OK” key) has been redone. Now you have the opportunity to group television channels into thematic groups, such as Entertainment, Business, Educational, TV shopping, Foreign, and others. Switching between groups is done using the Green key on the remote control of the satellite receiver from the general list of channels.

FAQ::

Question: For what purposes do you need to update the software?

Answer: The latest version of the firmware for HD receivers tricolor GS-8302 has a fresh, most modern interface for the Tricolor TV Cinemas service, the “Status” menu has been redone, and in addition, additions have been made to the system options of the satellite receiver, which improves the stability of its operation.

Question: As a result, the “Status” information window began to look different? Where have some of the positions that existed before gone?

Answer: For the comfort of Tricolor TV subscribers, the “Status” menu has been redone. Now you have access to 2 types of information display: short (includes more frequently used information, including information about the receiver ID) and extended (stores all information about the satellite receiver). For example, positions such as “Hardware Version”, “Module Firmware” and Database Version” can only be found in the extended window type, which can be initiated by pressing the Red key (“F1” or “i”) on the remote control satellite receiver while in the “Status” menu.

Question: As a result, the multifunctional keys in the interface of the Tricolor TV Cinemas package were modified?

Answer: In the latest version of the software, additional functions of the interface of the Tricolor TV Cinemas package were implemented. Now, by pressing the Red key, you can read the image of the selected film, Green - select one of the potential types of sorting the list of films (alphabetically, by genre, by upcoming shows, by newness in the schedule), Yellow - see the list of films for which you have selected time timer, Blue - see the list of films that will be available for viewing with the next update of the repertoire of the Tricolor TV Cinemas package. Also in the new version of the firmware, it is possible to display the interface of the Tricolor TV Cinemas package on the TV screen when you press the “Order a movie” or “Split File” button when watching any TV channel, and not just, as it was before, when watching a TV channel "TV.Search".

Question: Why is the “Genres” button needed in the general list of channels?

Answer: This feature allows you to group the list of television channels into thematic groups for comfortable navigation through the channels. By switching through the lists, you have the opportunity to find a particularly exciting group of television channels, including Entertainment, Business, Educational, TV shopping, Foreign, and others.

It is difficult to imagine modern residents without the Internet, mobile communications and, of course, satellite television. Since digital TV is quite in demand today, a large number of companies provide such a service. However, quality is important to Russians, so they prefer Tricolor TV. It is this digital television broadcasting provider that has the largest viewership.

By becoming a Tricolor TV subscriber, Russian residents gain access to a variety of channels on a wide variety of topics. The operator has taken care to provide appropriate content for both adults and children. For example, the “Children’s” package will appeal to any child, and parents will not miss the opportunity to enjoy bright and interesting cartoons, fairy tales, and educational programs. Sports fans and lovers of erotica will also be pleased - there are channels of this genre for them.

Activation of the “Unified” service is an opportunity to watch more than 200 TV channels of a musical, informational, entertainment nature, as well as all kinds of films, TV series and much more.

However, it is worth remembering that once you have activated the package, you must promptly renew its validity period. This is the only way you will have access to all channels included in the service. It couldn’t be easier to do this – you just need to choose a convenient payment method. And Tricolor TV has plenty of them. How to pay for Tricolor?

First of all, check the ID of the receiving equipment, since without it you will not be able to make a payment. This number can be found in the “Status” section (select from the menu).

And now more about payment methods:

Bank card holders can pay for Tricolor by bank card(the card must belong to the partner bank of the TV provider)
You can pay for the package at any post office or bank branch in Russia (the bank must cooperate with the operator)
There are special payment cards available for sale – scratch cards. It is enough to enter a certain code and the service will be extended
One of the methods is electronic payment systems - Yandex.money, WebMoney, QIWI, etc. That is, it is possible Tricolor payment via the Internet. You will need to have the required amount in your e-wallet (some systems charge a commission - keep this in mind)
Today, many subscribers use Internet banking to deposit funds ( Tricolor payment online) – it’s fast, convenient and you don’t need to leave home
Almost every small store, not to mention supermarkets, etc., has payment terminals installed. We find the appropriate section, enter the necessary information and deposit cash
You can pay for Tricolor TV packages at Euroset, Svyaznoy and other communication stores
You can transfer the required amount from your mobile phone account

Do not forget that when you enter payment Tricolor, personal account also quite suitable for this. Each subscriber has his own account with funds (deposited at will). If you have the required amount, you can use this method.

If you want to always have access to all channels included in the connected service, do not forget to renew it on time. Otherwise, one day you will not be able to watch your favorite shows or movies.

On April 12, 2017, new software was released for the GS 8302 model receivers, aimed at improving and improving the operation of this equipment.

Before starting the update, go to the “Status” menu item and write down the values indicated in the lines “Receiver software version” and “Module software version”.

After completing the update, the receiver software version should change to 1.25.322, and the module software version should change to 07.00.00.

ATTENTION! Do not turn off the power to the receiver until the update procedure is completed! Otherwise, the receiver may fail!

To update the receiver and module software, you must perform the following steps:

1. Unplug the receiver's power cord from the outlet, and then plug the receiver back in.

2. Switch the receiver to channel number 333 in the general list.

3. After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

When this message appears, select the “Yes” option and press the “OK” button on the remote control.

4. After agreeing to update the receiver software, service messages about the process of updating the receiver software will begin to appear on the screen. Updating the receiver software takes about five minutes.

5. Once the software update is complete, the receiver will reboot and enter channel viewing mode.

6. To continue the update, you must turn on the receiver again to channel number 333. Within one minute, the following message will appear on the screen indicating the need to update the module software:

7. When this message appears, press the “OK” button on the remote control. Updating the module software takes about a minute. The type of service messages is indicated below.

Attention! While updating the module software, do not turn off the power to the receiver! Otherwise, the receiver may fail!

8. After the software update is completed, go to the “Status” menu and make sure that the receiver software version has changed to 1.25.322, . and the module software version is as of 07.00.00.

9. At this point, the receiver software update is completed, and the receiver is ready for further operation.