Portable Wi-Fi router Beeline change password. From the MTS company

Write universal instructions about how to set a password on a router is impossible. There are many router models, differing in type. The interface of many models can even vary depending on the firmware, and not just on the model and manufacturer. The password for logging into your home WiFi network is set when installing the router. For the security of your network, you should not use a password that is easy to guess.

Router functions

To WiFi router in home network Laptops, tablets, smartphones, WiFi modules of smart TVs, devices and printers, game consoles and consoles are connected. Even modern Appliances has the ability to connect to the Internet, so the security of your home network directly depends on the settings of the router. U standard router in stock:

1. Wan port (for connecting to an Internet source).
2. At least 4 Lan ports for connecting desktop computers.
3. WiFi routers have an antenna and a module for transmitting a radio signal.

The router can also be equipped with:

• Print server and USB port for connecting a printer or MFP directly.
• Network drive for data storage.
• Gigabit Wan port for a leased line.
• Gigabit Lan ports for a high-speed network.
• One or two additional wifi antennas.
• USB port with the ability to connect 3G, LTE modem.

Currently, some routers operate in two frequency ranges of the wifi signal - 2.4 and 5 Hz. Before changing the password on your router, check this moment. When the router operates simultaneously in two frequency ranges, each of them must be protected with a password.

Router security settings

In addition to changing the password on the router, you can also set other security options in the settings. In addition to a password that protects against unauthorized connections, information sent and received via the Internet needs to be encrypted. The settings required for your network may differ from the default settings. Often during installation it is necessary not only to change the password on the WiFi router, but also to set encryption parameters. The most reliable option is WPA2-PSK. The WPA-PSK standard is easily penetrated by malware hacking Wi-Fi. The type of encryption depends on its parameter and can be designated AES or TKIP. When making changes to router settings, remember that they must match all devices connecting to the network.

Why is a password set?

The WiFi signal spreads over a considerable distance and penetrates walls. Without a password, someone else can connect to your network, so changing the password on the router is required:

1. If you suspect that someone is using your home network without permission.
2. To deny Internet access to anyone, such as children.
3. If the router was not previously used by you.

Most users prefer unlimited tariffs, and the connection of an outsider to the home network does not lead to the theft of Internet traffic, which means direct material damage. But the danger can be much more serious. If someone else connects to your router, your IP address could be used to send spam, distribute unauthorized information, pornography, threats. In this case, the most minor problem will be blocking your Internet by your provider. In the worst case scenario, you will have to defend your innocence in court.

What should the password be?

Before you set a password on your router, create and write it down. Avoid passwords that are easy to guess. TO easy passwords include names, dates of birth, telephone numbers, sequence or repetition of simple numbers.

A secure password must be at least 8 characters long. The password for the router must contain Latin letters, preferably in both registers; in addition, you can use numbers. To generate secure password you can use special service in the Internet. You can also come up with any phrase and type it with Latin letters, changing the register from time to time. Some use it as a password serial number router. Of course, you won't lose your password, but this method won't help protect your Internet from your roommates.

Too much complex password not easy to enter with game console or TV if necessary. Therefore, it is not advisable to add tabs and punctuation marks to your password.

Changing your password via the Web interface

Home network settings can be configured via the Web interface. To do this, you need to type the address 192.168.0.1 in your browser, then, if required, enter the administrator password.

The username for logging into the Web interface most often looks like admin, the password is 1234 or 1111, sometimes admin. You can find it in the instructions or on the back wall of the device. Usually the interface language is English, or you can select a language. Sometimes you have to make settings for your network manually. It's as easy as changing the password on your router; you can easily do it using our instructions.

The default address of the router on your home network may be different. You can find it yourself. To do this, type cmd in Latin letters on the command line and press Enter. You can also go to “Start” - “Programs” - “System Tools” - “Command Line”. After launch command line A black screen opens. It contains the ipcofig command in small Latin letters. In the resulting list we find the default gateway, its value will be the address for configuring the router.

Instructions for popular router models

By connection type, routers are divided into:

1. Ethernet routers connecting to the Internet via twisted pair.
2. ADSL routers connecting to telephone line.
3. Routers for 3G and 4G modems.

Companies that produce routers for the home:

• Asus, D-link - the most common routers, inexpensive and easy to set up.
• ZyXEL - reliable routers with large set functions, there are Russified firmware.
• TrendNet, TP-Link, Huawei - inexpensive and easy-to-use routers, with standard set functions.
• Ubilitu nano, Mikro Tik - new, modern inexpensive Wi-Fi access points.
• Apple - WiFi routers for Apple devices.
• Cisco, 3Com, Acorp, Negear, Linksys also produce network equipment.

D-link

You just need to set a password on your D-link router. After logging into the web interface (192.168.0.1), you will see several tabs. You must select the Wireless settings tab and click on Manual Wireless Setup. In the Pre-Shared Key field you should enter New Password for your home network and save the changes by clicking Save Settings. This instruction valid for D-link routers Dir300/600/615/620 and others.

TP-Link

For TP-Link router changing the password looks about the same. In the Web interface, find the Wireless tab, then Wireless Security. In the input field called Wireless Password, enter a new password and save it by clicking the Save button. This router has a Disable Security feature, which does not ask for a password at all; before setting a password, make sure that the “WPA/WPA2 - Personal (Recommended)” option is used.

ZyXEL

To change the password on the ZyXEL WiFi router, go to the Web interface at 192.168.1.1, on the Network tab, go to the Wireless LAN section and enter a new password in the Pre-Shared Key window. Changes are saved using the Apply button.

Asus

To set a password for Asus router, go to the device’s Web interface at 192.168.0.1. In the settings on the Wireless tab there is a WPA Pre-Shared Key field. You need to enter a new password into it. You can save the changes by clicking Apply.

Huawei

These routers are mainly provided by the Rostelecom provider. You can find out how to change the password on a Huawei router by going to the Web interface on the Basic tab. The interface address is 192.168.100.1. The username for the Rostelecom network is telecomadmin, the password is admintelecom. In the settings you need to find the Wireless Lan panel. In the Pre-Shared Key window, enter a new password. Changes are saved with the Apply button; for some models this button may be called Submit. On the System Tools tab, find Configuration File and click the Save Configuration button.

TrendNet

For the TrendNet router, the Web interface address is 192.168.10.1, Account and the default administrator password are admin. Going into the settings, find the ADVANCED item and click on Wireless 2.4GHz, the 5GHz range will need to be configured in the same way.

• WPA passphrase - enter your password.
• Save the changes with the Apply button.

Upwell

• In the browser we type the address 192.168.10.1.
• We enter the security data - admin/admin.
• We enter the “Basic settings” item.
• The key is the password. Enter at least 8 characters and confirm.

Linksys and Cisco

Device firmware for personal use these two brands are the same. Therefore, the recommendations on how to set a password on a router are the same. Open 192.168.1.1 in the address bar, go to the administration section, enter the password in the Router Password field, then confirm it with the line below. Save the changes by clicking Change Password.

Non-standard routers

Apple devices often do not support Ethernet technologies and connect to the Internet either via WiFi or Mobile Internet. To use them where there is only an Internet cable, you can install and configure a Wi-Fi router from Apple. Let's look at how to set up the Airport Express model.

Apple

The network is configured using the AirPort Utility program, which can be launched from the “Utilities” - “Programs” folder on tablets and mobile devices ah, on laptops and Apple computers it is pre-installed. To change your password, click on the already icon existing network and click Edit. In the device configuration, enter a new password and confirmation, and the changes are recorded with the “Update” button.

"Beeline"

The peculiarity of home Internet from the Beeline company is that a router with ready-made settings is provided under the contract. The question of how to change the password on a Beeline router is often asked by users of this network. Everything is very simple. The web interface address for configuration can be 192.168.0.1 or 192.168.1.1. The password and account are standard - admin/admin. On the “Wireless Network” tab, in the “Shared Key” field, enter a new password and save the changes.

Netgear

The Dom.ru provider also has a proprietary NetGear router. If technical support does not tell you how to change the password on the router, you can do it yourself.

• Web interface address: 192.168.1.1.
• Login and password admin/password.
• Options Tab wireless connection».
• In the Passphrase field, enter any value and click Apply.

Setting up routers supporting 3G, 4GF, LTE

Many people are concerned not only with the question of how to change the password on the router, but also on a device such as MTS-Connect, for example. Since the modem also distributes WiFi, setting a password is advisable.

MTS-Connect

By default, MTS devices have a network installed with the following parameters:

• Network name - SSID: MTS-ROUTER.
• Encryption type WPA/PSK-AES.
• Password: adminmts1.

To change the password and settings, go to the “Network” - “Wireless Connection” page. In the “Basic Settings” section you can change connection parameters. To change the password, click “Security Settings” and change the password in the “PSK Encryption Key” field. The "Edit" button will save the changes made.

Yota

YOTA also produces routers for its devices. Internet access is provided using LTE technology, and WiFi is distributed at standard frequencies for Russia. The default password is listed on the back of the router. To change it, go to the WEB interface. Address 10.0.0.1., password and account admin/admin. In the Wi-Fi Passport field, enter a new password value. We select WPA as the encryption type. Save the changes by clicking “Save”.

"Megaphone"

Finally, if you are the happy owner of a 4G modem from Megafon, you will need information on how to change the password on your router. You can access the settings through the Web interface at 192.168.10.1. Standard login admin/admin. On the “Management” tab, in the “Key” field, enter a new eight-digit password and save the settings.

What to do if your password is lost

In most cases you have to reset the settings. The majority of routers have Reset button on the case, with its help the settings are reset to factory settings. You will have to set up your Internet connection again. Make sure you have the instructions at hand, or entrust the task to professionals. Keep your password in a safe place, copy it to several places: notebook, file on your desktop, take a photo with your mobile phone camera.

Now you know how to set a password on a router, and you can configure most well-known models. You can always find out the answers to your questions by going to the device manufacturer’s website. There are a sufficient number of routers with Russified firmware, some are controlled special programs from a computer. Whatever question you encounter, instructions will come to the rescue or technical support your provider.

Users of wireless networks may encounter problems with slow Internet speeds or high traffic consumption. In most cases, this means that a third party has connected to the Wi-Fi - either guessed the password or hacked the security. The easiest way to get rid of an uninvited guest is to change your password to a strong one. Today we will tell you how this is done for branded routers and modems from the Beeline provider

Shift operation passphrase to access wireless network no fundamental difference from similar manipulation on others network routers– you need to open the web configurator and go to Wi-Fi options.

Web-based router configuration utilities usually open at 192.168.1.1 or 192.168.0.1 . The exact address and default authorization data can be found on the sticker located on the bottom of the router case.


Please note that in routers that have already been configured previously, a combination of login and password may be set that differs from the default one. If you don't know them, then the only option is to reset your router to factory settings. But keep in mind that after resetting the router will have to be configured again.

Two models of routers are sold under the Beeline brand - Smart Box and Zyxel Keenetic Ultra. Let's look at the procedure for changing the Wi-Fi password for both.

Smart Box

On Smart routers Box change The code word for connecting to Wi-Fi is as follows:

1. Open your browser and go to the router's web configurator, whose address is 192.168.1.1 or my.keenetic.net. You will need to enter authorization data - by default this is the word admin. Enter it in both fields and click "Continue".



2. Next click on the button "Advanced settings".



3. Go to the tab "Wi-Fi", then in the menu on the left click on the item "Safety".



4. The first parameters to check are: "Authentication" And "Encryption method". They should be installed as "WPA/WPA2-PSK" And "TKIP-AES" accordingly: this combination is the most reliable at the moment.



5. The actual password should be entered in the field of the same name. We remind you of the main criteria: minimum eight-digit (more is better); Latin alphabet, numbers and punctuation marks, preferably without repetitions; do not use simple combinations like birthday, first and last name and similar trivial things. If you can't figure it out suitable password, you can use .



6. At the end of the procedure, do not forget to save the settings - first click "Save", and then click on the link "Apply".

The next time you connect to a wireless network, you will need to enter a new password.

Zyxel Keenetic Ultra

Internet center Zyxel Keenetic Ultra already has its own operating system, so the procedure is different from Smart Box.

As you can see, changing the password on the router does not cause any problems. Now let's move on to mobile solutions.

Changing the Wi-Fi password on Beeline mobile modems

Portable network devices under the Beeline brand there are two variations - ZTE MF90 and Huawei E355. Mobile routers, like stationary devices of this type, are also configured via a web interface. To access it, the modem must be connected to the computer using a USB cable and the drivers installed if this does not happen automatically. Let's move on to the change Wi-Fi password on the specified gadgets.

Huawei E355

This option has been around for quite some time, but is still popular among users. Changing the code word for Wi-Fi of this device happens according to the following algorithm:

Don't forget to update your Wi-Fi passwords on all your devices.

ZTE MF90

The mobile 4G modem from ZTE is a newer and feature-rich alternative to the above-mentioned Huawei E355. The device also supports changing the Wi-Fi access password, which occurs as follows:

After this manipulation, the password will be updated.

Conclusion

Our guide to changing the Wi-Fi password on Beeline routers and modems is coming to an end. Finally, we would like to note that it is advisable to change code words more often, with an interval of 2-3 months.

Just 15 years ago, having at least one computer in the house was associated with a storm of emotions and delight. Connecting to the Internet in those days was carried out using a telephone line through a modem, which groaned and creaked every time it went online. For changing slow device cables came that did not “take up the line” and allowed you to get into the “web” quite quickly.

Today, even cats have their own tablets and personal pages on Instagram and social networks in order to be constantly online, they even spend internet to the dacha, not to mention the fact that each apartment has at least 3 gadgets that can work via an Internet connection. Based on this, using a lot of cables is impractical and, of course, inconvenient. An excellent analogy in this situation is wifi connection, which is carried out through a router and, since it covers fairly large areas, including neighboring apartments and floors, there is a need to “mess up” your device in such a way that neither insidious neighbors nor simply lovers of freebies can take advantage of this connection.

It is immediately worth noting that standard wifi passwords It is not recommended to use routers as permanent ones, since they are needed only so that the user can make initial settings.

How to find out your password

If you have forgotten what combination of numbers and letters was used to secure your connection, do not despair. In order to understand how to find out the password for your wifi router, it is not necessary to look for instructions and the name of your device model for a wireless connection.

1) In the lower right corner of the monitor you need to find the network connection icon (usually it is located slightly to the left of the clock). By clicking on it, you will see a drop-down window that will list all the networks to which you can connect. 2) Find yours among them and click on it right click mouse and select Properties. In the window that opens, go to the “Security” tab and check the “Display entered characters” checkbox. Ready!

In the same window, you can change the wifi password to a more secure one by selecting one of the proposed encoding methods. But what if you change security code is it necessary through the web interface of the device, for example, when accessing the Internet is carried out not through a computer, but through a smartphone, tablet or TV?

How to log into the router's web interface

In order to get into the interface of the router itself, you need to enter in the address bar of the browser local IP address devices. The default for most devices is 192.168.0.1 or 192.168.1.1, but if given value not suitable, you can always contact the provider and check with him necessary information or find it manually yourself. To do this, you need, as described earlier, to go to the list of all available connections and right-click on “Status” and in the window that opens find the “Details” button. By clicking on it, you will see many lines, but we are only interested in one - the default gateway is IPv4. It is these numbers with dots that are the value that must be entered in the address bar. It doesn’t matter whether the computer is connected via a cable or via a router at the moment.

Tip: The required IP address may also be indicated on the device itself, so check it first.

If everything was done correctly, a standard window for entering the administrator login and password will appear on the monitor. Most often this is “admin” and the standard password is 1234 or 1111. Again, you need to clarify the necessary data for your router model, if standard passwords wifi routers unsuitable.

How to change the password on a Zyxel wifi router

In order to change the security code on the zyxel device, you need to go to the web interface of the router (for this model, the address 192.168.1.1 is most often used). After entering your username and password, you will be taken to the main menu, which will have many tabs and buttons.

Tip: If you cannot remember the data to access the panel, press the “reset” button on the device itself and wait 10 seconds. This will return the router to its default settings.

Next, let's move on to the most important thing - how to change the password on a Zyxel wifi router. To do this, you need to find the Network – Wireless LAN tab and opposite the “Security Mode” line, select the WPA-PSK encryption type. In the Pre-Shared Key line you need to enter a new password for the wireless network.

The interface of “Zuxel” routers can be very different, for example, the model Keenetic Start entrance is carried out as follows: in order to get into required section you need to find the wireless connection icon at the bottom and then go to the “Access Point” tab at the top, where there will be the coveted “Network Key” field.

How to change the password on an Asus wifi router

To change the password for the Asus router, we still go to the router interface and enter the registration data (for these models, both values ​​are silently set to “admin”). Further, depending on the model, the procedure may differ.

Go to the “General” tab (it is located at the top in horizontal menu) and open " Additional settings" Next you need to find the line “Wireless network” (in most cases it is on the right). Change the “Authentication Method” value to “WPA2-Personal”. In the section “Preliminary WPA key» enter the selected password and save the settings. Ready!

How to change the password on a Beeline wifi router

A distinctive feature of these devices is that, according to the contract, the provider provides a router with ready-made settings. In this case, the logical question less often arises, how to change the password on a Beeline wifi router.

In fact, the procedure is practically no different, and the popular mobile operator acts in this regard just like everyone else, by default setting the same login and password on its devices. In all other respects, there shouldn’t be any difficulties, perhaps with the exception of the router model, since almost all of them differ from each other in the configuration of the web interface menu.

However, the router address will still be the same, either 192.168.1.1 or the second one. Then, using the default admin/admin data, you will be taken to main panel router management. To return to factory settings, as in the first two cases, just hold down the “Reset” button for a while.

After changing the password in the “Network” section, go to “WAN” and change the connection settings manually. To do this, set the type to “L2TP”, enter the user name and select a dynamic IP address. If desired, you can install a static one, but in this case you will have to use additional paid services provider, so it is better to use the standard option. In addition, for dynamic address you will have to manually enter the gateway, mask and DNS values. Additionally, you can change other settings, for example, enable broadcasting, configure the channel and change the name of the wireless network.

How to change the password on a Rostelecom wifi router

Another company whose services users turn to to connect via a wireless network is Rostelecom. Routers from this company are most often purchased directly from the provider, and not from a computer hardware store. Versions and firmware can also differ significantly from each other, but the principle of gaining access to the web interface is the same as for other devices of this type. Therefore, if before purchasing a router you are in doubt about how to change the password on a Rostelecom wifi router during further work, you can safely purchase the device.

The principle of changing settings is similar. First you need to enter the local IP address of the router in the address bar, enter the main control panel and find navigation menu(it is most often located at the top of the window or on the left). After this, you need to go to the section containing the words “Wireless” or “WLAN”; it will contain everything you need to work with wireless networks, including a password. If you couldn’t find anything similar, go to “Basic settings” or “Advanced settings” and try searching in them.

After this, we can visit the section dedicated to protection wireless connection, it may be called "Security". In it we change the password and “Pre-shared key”. After all changes, save the settings.

After changing the password on any router, it is best to reboot the device. To do this, you can press the “Reboot” button for 10 seconds or unplug the router from the outlet for a while. All settings made will take effect.

In custody

When choosing a password, you should not use simple sequences, for example, 123456789 and so on. The most secure codes combinations of symbols, signs and numbers are considered. Moreover, the use of upper and lower case will further confuse hackers. You should not use pet names, last names, or dates of birth as a router password. All this data is first checked through social media scammers. If you cannot come up with a combination yourself, you can always use special generators, which can be found in a search engine.

To avoid headaches, it is better to write down the password so as not to lose it, you can stick it on the router.

Beeline is one of the most popular Internet providers, even in the most remote corners of Russia. The company provides access to mobile or home internet. In this regard, to save money and convenience, many use a Wi-Fi router.

It can be purchased at many points of sale. Setting up a Beeline router– the task is not difficult if you know key points and connection features.

The process does not require special knowledge computer technology, you can figure it out yourself. And for this it is not at all necessary to call a specialist and pay a considerable amount. The installation and connection diagram of the device is almost the same for different wi-fi models routers: DIR 300, ASUS, TP-Link, Zyxel and others.

General setup procedure

1. If the router has just been purchased, you need to unpack it and connect the power adapter.
2. Choose a place where the equipment will be installed.
3. Connect to the Internet via cable or Wi-Fi.
4. Connect the device required for setup: laptop or computer.
5. Connect the router to the mains.
6. Configure the router by going to the browser address written at the bottom of the equipment. The user name and password are also indicated there.
7. Set up Internet (further in the article).
8. Configure Wi-Fi settings. Change password and name (further in the list).

How to configure a Beeline ASUS router?

Connection diagram:

1. Write the parameters: login, password specified for ASUS: admin/admin (for the RT-N12 model).
2. Specify connection type L2TP or L2T+Dynamic IP (if available).
3. Fill in the fields: host name and PPTP/L2TP, indicating the following address: tp.internet.beeline.ru.
4. Check that the router is working properly: go online and open any website.