The printing subsystem is not running Windows 7. Windows was unable to connect to the printer

Twitter

If you are faced with a problem related to the fact that the printing subsystem is unavailable, then you should not rush and run to call workshops and service centers, because almost any user of office equipment can cope with this widespread problem. To solve a problem like “the printing subsystem is unavailable, how to fix it,” first of all, try restarting both the computer and the office equipment itself. The likelihood that such an action will help you is small, but it still exists. If such simple action was not enough to resolve the described problem, then resort to the recommendations described below.

So, if the error related to the fact that the printing subsystem is unavailable haunts you, then first of all be sure to check your entire operating system Windows 10 or more old version for the presence of viruses. Use any high-quality and popular antivirus for this, for example, Dr. is an excellent option. Web, No. 32, Kaspersky. In addition, for a more thorough check, use special antivirus utilities, for example, AVZ, Microsoft Safety Scanner, Dr.Web CureIt, etc. With their help, you can find and remove viruses that could cause local system printing on your PC began to generate an error. It should be added that, if possible, check your hard drive on another personal computer, which is truly "healthy" and higher performing.

If necessary, create on a “healthy” PC bootable USB flash drive Dr.Web LiveUSB. This utility serves to restore the system from boot drive or from a disk drive. With its help, you can not only restore the affected operating system on which local subsystem printing is not performed, but also clean the PC from any infected and suspicious programs. In addition, it will allow you to pre-copy the necessary data to another PC or removable media.

Also, the Dr.Web LiveUSB utility will be useful if you need to disinfect previously infected objects. Kaspersky also has approximately the same utility - Kaspersky Rescue Disk 10. In general, choosing which one to use is up to you personally!

If checking your PC for viruses and using special anti-virus utilities did not help you and the printing subsystem is still unavailable, then pay attention to the following recommendations.

Recovering system files

If viruses are not the reason that the local printing subsystem cannot run and function normally, then try recovery system files your OS. There is a considerable possibility that virus programs damaged some important files, as a result of which a problem appeared due to the fact that the printing subsystem was unavailable.

To try to solve the problem using this method, open the command line by calling the “Run a program” window using the combination Ctrl keys+ Windows and enter “CMD” there. Don't forget that before doing this, you need to log into your computer as an administrator. In the command prompt window that opens with a black background, type “sfc /scannow” and press Enter. This action will launch a utility whose function is to protect Windows OS files. Once it's finished, try printing something. If the service windows print still won't work, try the automatic fix. To do this, you just need to go to the web address “http://support2.microsoft.com/mats/printing_problems/ru”, then click on the green “Run Now” button and follow all the instructions that will be displayed next.

We are trying to “roll back” the system

The question arises, what to do if the recommendations listed above did not help and the local printing subsystem is still not running? To solve this problem, an excellent solution may be to “roll back” the system, i.e. loading it latest configuration which was in normal working order.

To do this, open utilities from the “Accessories” list in the “Start” menu, and then click on the item that allows you to perform a system restore.
In the new window, select "Recover more than early state computer", and then determine a specific restore point when your system was working normally without any failures and when the local printing subsystem was available.
Finally, wait until Windows rolls back, and then reboot the system if the computer did not do this on its own.
Then check whether the local printing subsystem is available by trying a test print.

Print queue problem

If the printing subsystem is unavailable and none of the above helped, then click on the “My Computer” icon right click mouse and go to “Management”. Find the services tab and click on it. Find “Print Spooler” there and, opening the menu by right-clicking, click on “Stop”. Overall, this should correct the situation and return the printing subsystem to normal operation.

[Local Printing Subsystem Not Running] is a notification that occurs when some users do, and not all users know what to do if such a situation occurs.

This error prevents the printer and system from working properly and prevents printing.

However, you can eliminate it yourself - there are several methods for this, depending on what exactly caused the appearance of such a notification.

Contents:

The essence of the problem

When you try to copy any document or image, a notification from Print Manager, indicating that the system cannot connect to it and the subsystem cannot be executed.

This phenomenon occurs when connecting the device, most often during the first attempt, since it is related specifically to the device settings and its interaction with the PC.

It is extremely rare that such an error can be generated by one that worked properly before.

What does this notification mean? It informs the user that there is an error in the Dispatcher that is preventing him from completing a task or connecting to him.

It is the inability to connect that is often the cause of this problem.

But sometimes there is another reason. This is in the folder that forms the queue.

Such “garbage” accumulates as a result of installing unnecessary and varied software for device, drivers, etc.

Before you try to fix the problem, you need to find out what exactly caused it.

Enabling the service

The subsystem about which we're talking about, this is the Dispatcher. It is responsible for building the queue and sending jobs to it.

It can be disabled either by the user himself or as a result of an action malicious files.

The dispatcher is located in the administration settings, so to work with it you need to log in account on behalf of the administrator. Then proceed as follows:

Go to Control Panel from the Desktop (right-click on free space), through the Start button menu or using search on the computer, which is especially convenient on operating systems;
Find a section Administration and go to it, and from there to the Services section (sometimes there is also a Local Services item, and you don’t need to go into it);
Will open big list, which you need to scroll down to Manager (on older versions of the operating system it may be called Queue Manager), and then open it double click left mouse button;
Go to the General tab, although this is usually what opens;
Find the Startup type field - it must have the Automatic option;
If it is not, then install it;
If the Run button is active at the bottom of the window, then click on it;
Click on the OK button;
After that, close the window; saving is not required.

After this, the computer should be restarted. If the problem lay in the service itself and it, then after this procedure everything should work fine.

If the problem has not been resolved, then it is necessary to look for another cause.

Connection

If the previous method did not fix the problem, or if the error appeared immediately after connecting the device, then the problem most likely lies in the connection itself.

Methods for solving it vary depending on which of them is connected - network or local.

Network solution

A universal solution is a local port connection method. With this method, you manually specify the path with which the system should work.

To do this, follow the instructions:

Go to Control Panel one of the methods described in previous method problem solving;
Go to section Printers and devices(or Equipment and Sound, and from there - Adding a device, if you have Windows 10 installed on your PC);
Click on the Install button at the top of the window that opens;
A window opens listing possible options devices - click on the section Add a printer;
In the window that opens, find the Create field new port and place the marker in the window opposite the inscription;
Below in the drop-down list of the Port Type section, specify Local Port;
Click on the Next button at the bottom of the window;
A small window will open in which you need to enter the path to it (although it is called Port Name), you must take into account spaces, case, etc.;
Click OK;
In the next window select required driver For normal operation devices (downloaded or loaded from a memory card or disk);
Click Next again;
Then click on the Next button several more times, agreeing with what is suggested Port Creation Wizard, until the window closes.

After this, restart your computer. It should now work properly. If this does not happen, then check the spelling of the path again.

Hello again, friends! As in, now we will talk again about setting up the printer and MFP. To be more precise, we will not talk about the setting itself, but the error: “ Windows was unable to connect to the printer. The local printing subsystem is not running", whom I met just yesterday, . Of course, I have encountered a similar error before, but the idea of writing an article with its solution only came to me now.

Let's, as usual, first look at what could cause a message to appear indicating that Windows was unable to connect to the printer. In principle, according to the words: “the local printing subsystem is not running,” it is clear that in this moment We have a problem with the print spooler service. How to determine whether a service is accurate responsible for the appearance errors and restore its functionality, I will show below.

The second reason why Windows cannot connect to the printer is that the spool folder and registry, which is responsible for the print queue, is clogged. As a rule, this happens after numerous installations of software in the form of drivers and absolutely different brands and printer models. By reading further, you will be able to determine whether the problem really was in the spool, and if the answer is positive, you will learn how to clean it.

So, if you are faced with the error “The local printing subsystem is not running,” then let's look at each option in turn that would help us connect the printer, regardless of whether it is network or local.

“The local printing subsystem is not running”, enable the service

The local subsystem is a service " Print Manager", which is located in the computer administration settings. Therefore, if we see that it is not running, then it is simply disabled either by the user or third party program or a virus.

To enable it, go along the path “ Control Panel»»- « Administration» — « Services" I would like to note right away that these are not local services, but simply services. I focus on this because all users are constantly for some reason they come in exactly there, although I always voice to them just the word of service.

So, in the list, we go down to the bottom until we get to “ Print Manager» ( in Windows XP it is the Print Spooler). Having found it, we go into it using a double click. In the parameters that appear, in the item State, it should be “Automatic”; if this is not the case, then change it to the appropriate value. Further below, only the “ button should be active Disable", if again this is not so, but instead operating button is " Launch", then click on it and close the window having applied all the settings.

If the problem was really just the service, then everything should work fine, otherwise, the service will turn off in a moment, meaning that the problem « The local printing subsystem is not running », I couldn’t decide and that it was time to move on to the next point.

Connecting a network printer with the error “Windows could not connect to the printer”

What should I do if, when I try to connect a network printer, I receive an error about the failure of the local printing subsystem? So, having dealt with the first point, namely by starting the service, the situation did not improve and by going to network computer you still can't connect to network printer? Well, then let's move on to an alternative option.

An alternative is to connect the device via “Local Port”, in which you just need to enter the path to the network printer. Let's move on to clear example how it's done.

Now in the menu that appears, select “ Addition local printer ».

We create a new port by selecting from the proposed menu, port type: “”.

Now, considering everything capital letters and symbols we write the path to the printer (Example: \\vitaliy\HP LaserJet 1020).

Usually, after connecting in this way, everything starts working as if nothing had happened, without throwing out a message stating that Windows was unable to connect to the printer or that the local print service is not running.

Connecting a local printer when the error “Windows could not connect to the printer” appears

Oddly enough, similar errors occur when connecting network device, and when connecting local printers. In this paragraph, they will be discussed, although this option can also help cope with the problem of the print manager and when setting up a printer over the network, so do not under any circumstances skip this point.

Usually, when setting up a local printer, the print manager starts normally, but after a few seconds it immediately shuts down. Based on this, we can conclude that the problem lies in the Spool, which has simply become clogged over some time.

The conclusion suggests itself: if it’s clogged, then it needs to be cleaned. Detailed description on cleaning is already present on the site here: so I don’t see the point of telling everything again in this article. By following the link you will find step by step instructions, by completing which you can easily get rid of the error “Windows was unable to connect to the printer. The local printing subsystem is not running" and you can easily connect to any printer.

All three points, as always, have been personally tested by me in practice more than once, so I can tell you for sure that they all work, the main thing is to find yours. But, do not forget that I am always with you, so if you have questions, write to me in the comments, where I will definitely at least try to help you.

In Windows 10, the developers have provided a very convenient built-in printing utility: you can use any printer without installing drivers or additional software. Unfortunately, in earlier versions there is no such preference: if you make the slightest mistake in the settings, a window immediately pops up with a notification: “the local printing subsystem is not running in operating system Windows 7". Sometimes such a nuisance can happen with Windows 10 due to malfunctions in the functioning of the computer. Below we will look at the causes of the problem and how to fix it.

Ways to solve the error How to solve the error “The local printing subsystem is not running in Windows.”

Sources of error:

shutdown of the service responsible for the process (accidental or intentional);
malware;
incorrect installation of printer drivers;
clogged print queue register.

Solutions

The most common reason for printing failure with code 000006 (error 0x000006ba) is the shutdown of the responsible service, so we first check this possibility, and then move on to others.

Checking "Print Manager"

Typically, for Windows 10, these measures are enough to normalize the process of outputting data to paper.

Virus scanning

Viruses often interfere with printing. For effective cleaning, log in to the system in “Safe Mode”:

You can also download an antivirus utility and run a scan from a flash drive.

Cleaning the print queue

Normal way

If, in response to an attempt to clear the print registry, a message appears indicating that the operation cannot be completed, you will have to resort to another method.

Restart your computer and try printing some document to make sure everything is working fine.

System Restore

It is also worth checking the status of system files. For this:

Call " Command line"(It is written above how this is done).
Enter the command: C/Windows/System32/sfc /scannow.

Now the OS will diagnose and fix problems on its own.

Reinstalling the Printer

Disconnect the printer from your computer and network.
Go to “Control Panel” - “Devices and Printers”.
Select the printer and click “Remove device” at the top.
If you have Windows 10, then restart the system and connect the printer to the computer again.

For Windows more earlier versions, you need to download drivers from the website of the company whose name your equipment bears and install them:

Extract the files from the archive and keep them somewhere handy so you can remember the exact path.
Open “This PC” - “System Properties” - “Device Manager”.
Find your printer, right-click on its name and select “Update driver” - “Search on your computer” - unzipped files.

When trying to connect new printer and in some other cases related to printing materials from a computer, the user may encounter the error “The local printing subsystem is not running.” Let's find out what it is and how to fix this problem on a Windows 7 PC.

The most common reason When the error studied in this article occurs, the corresponding service is disabled. This may be due to its deliberate or erroneous deactivation by one of the users with access to the PC, with various failures in the operation of the computer, and also act as a consequence viral infection. The main ways to eliminate this problem will be described below.

Method 1: Component Manager

One way to run the required service is its activation through "Component Manager".

Click "Start". Go to "Control Panel".

Click "Programs".

Next click "Programs and Features".

On the left side of the shell that opens, click "Turn Windows features on or off".

Starts "Component Manager". You may have to wait a short time while the list of items is built. Find the name among them "Print and Document Service". Click on the plus sign located to the left of the above folder.

Next, click on the checkbox to the left of the inscription "Print and Document Service". Click until it becomes empty.

Then click on the named checkbox again. There should now be a checkbox next to it. Place the same mark next to all elements included in the above folder where it is not installed. Next click "OK".

After this, the procedure for changing functions in Windows will be performed.

After completing this operation, a dialog box will open asking you to restart the PC to make the final change of settings. You can do this immediately by clicking the button "Reboot Now". But before doing this, do not forget to close all active programs and documents to avoid losing unsaved data. But you can also press the button "Restart later". In this case, the changes will take effect after you restart the computer in the standard way.

After restarting the PC, the error we are studying should disappear.

Method 2: "Service Manager"

Activate related service To eliminate the error we are describing, you can use "Service Manager".

Go through "Start" V "Control Panel". How to do this was explained in Method 1. Next, select "System and safety".

Come in "Administration".

Select from the list that opens "Services".

Activated "Service Manager". Here you need to find the element "Print Manager". For more quick search build all names in alphabetical order by clicking on the column name "Name". If in the column "State" no value "Works", this means that the service is deactivated. To launch it, double-click on the name with the left mouse button.

The service properties interface is launched. In area "Startup type" select from the list provided "Automatically". Click "Apply" And "OK".

Returning to "Dispatcher", highlight the name of the same object again and click "Run".

The service activation procedure is in progress.

After it ends, near the name "Print Manager" there should be a status "Works".

Now the error we are studying should disappear and no longer appear when trying to connect a new printer.

Method 3: Restore system files

The error we are studying may also be a consequence of a violation of the structure of system files. To eliminate such a possibility or, conversely, correct the situation, you should check your computer with the utility "SFC" followed by a procedure for restoring OS elements if necessary.

Click "Start" and log in "All programs".

Navigate to folder "Standard".

Find "Command line". Right-click on this element. Click "Run as administrator".

Activated "Command line". Enter the following expression into it:
Click Enter.

The procedure will begin to check the system for the integrity of its files. This process will take certain time, so be prepared to wait. In this case, do not close it under any circumstances. "Command line", but if necessary you can collapse it to "Task bar". If any inconsistencies are identified in the OS structure, they will be corrected immediately.

However, it is possible that if there are errors found in the files, the problem cannot be fixed immediately. Then you should repeat the check with the utility "SFC" V "Safe Mode".

Method 4: Check for viral infection

One of the root causes of the problem under study may be a virus infection of the computer. If you have such suspicions, you need to scan your PC with one of the anti-virus utilities. This must be done from another computer, from a LiveCD/USB, or by logging into your PC in "Safe Mode".

If the utility detects a virus infection on your computer, act according to the recommendations it gives. But even after completing the treatment procedure, there is a high probability that malicious code managed to change the system settings, so in order to eliminate the local printing subsystem error, it will be necessary to reconfigure the PC using the algorithms described in the previous methods.

As you can see, in Windows 7 there are several ways to resolve the error. "The local printing subsystem is not running". But there are not so many of them in comparison with the options for solving other computer problems. Therefore, it will not be particularly difficult to eliminate the malfunction if necessary, try all of the above methods. But, in any case, we recommend checking your PC for viruses.