Connecting iPad 2 to a computer. How to Connect Apple iPad to Wi-Fi - Detailed Instructions


You can download iTunes from the official Apple website using the appropriate download section. Go to Apple.com and select the iTunes section in top panel. Click the "Download iTunes" button, enter the address of your Email and click “Download” again on the left side of the page that appears. Wait until the installer file finishes downloading. Launch the resulting program and install it following the on-screen instructions.

Connection via cable

Insert the cable into the appropriate iPad port and then connect the other end of the wire to USB interface computer or laptop. Wait until the iTunes window appears and your device is detected. To manage music, video files and programs on your device, left-click in the upper right part of the iTunes window. You can manage stored files by moving through the sections of the top panel of the application window.

Connect via Wi-Fi

To synchronize via Wi-Fi, you must also connect your iPad to your computer using the cable that was included when purchasing the device. Left-click on the name of the tablet. Go to the "Browse" section and check the box next to "Sync this iPad over Wi-Fi." Click "Apply" at the bottom of the program window. After this, you can disconnect the cable from the computer. If the setup was successful, your iPad will appear in the Devices section.

To synchronize via Wi-Fi, you must use the same access point as your computer. To copy files in the device menu, you must use the “Synchronize” or “Apply” buttons. After initial setup Wi-Fi synchronization reconnection iPad to computer using a cable is not required - iTunes will automatically detect the tablet connected to the access point. If it is impossible to perform wireless connection try restarting the program, Wi-Fi device, then repeat the synchronization settings.

Using wired or wireless connection iTunes lets you sync apps, audio files, books, contacts, calendar notes, movies, photos, and various documents. To start copying, move necessary files into the program window, then go to the device content management section, check the copied documents and click the “Synchronize” button. Once copying is complete, you can disconnect iPad from your computer and start viewing or listening to available files.

Every first time purchaser apple tablet iPad, thinking about how to connect it to the computer. It seems simple at first glance, but a number of issues arise that will be difficult for you to carry out without solving them, for example, synchronizing the device. In this article we will look at how to connect an iPad to a computer and to iTunes via USB.

As a rule, having bought new tablet, there is a need to install your favorite games, applications, social media, photographs or pictures. To do this, you need to configure both devices so that the data you select from one device is transferred to the other quickly and conveniently. Likewise, if you bought a computer, then you need to fill it with information that you are used to working with, for example, transfer applications and other files.

To connect your iPad and connect it to your computer, you need to create data synchronization between them. The specially supplied USB cable will help us with this. But we are not talking only about how to make the connection, but the question is: how to set up the connection. Having established the necessary data synchronization through the iTunes program, you will subsequently be able not only to download any applications on the iPad using great interface, but also regularly save all data from the iPad to your computer, thus ensuring their safety in case of loss of the tablet.

You will need a USB cable, a computer and a tablet device. Check if it is installed on your computer iTunes program, and if not, then download it latest version from the official website. If such a program is already installed on your PC, then update it to the latest version. Regarding the view Windows programs, then in in this case her version doesn't matter.

Turn on your computer and click the activation button, launch the iTunes program by clicking on its icon. Insert one end of the cable into the tablet for the Lightning connector if you have a fourth generation iPad or higher. If you are using an older generation iPad, then the connection will be made through a 30-pin plug connector, and be sure to install it with the marking on top. In contrast, the Lightning plug is more universal and can be connected from either side. Insert the other end of the cable into standard USB computer connector.

Turn on your iPad by pressing Power button so that the screen lights up. Once the two devices are connected, your computer monitor will display the connected tablet in iTunes. You can also make sure that the connected iPad is configured if you go to the “My Computer” section on your computer, where the icon and model of your iPad will be displayed along with other connected devices.

In turn, the iPad display will inform you about the connection to the PC by displaying its number. Once the connection has occurred, you can then begin synchronizing data from devices. If installed on iPad iOS firmware 7, you may receive a message asking you to accept this computer as safe device. So click confirm this action button.

Synchronization with computer

For this purpose in open program In iTunes, select the “File” section, and then the “Devices” subsection, where we find the iPad and click on it. To synchronize, open the “Information” parameter and check all action items for synchronization. In the “Applications” section we designate those programs that you decided to transfer from the tablet to the computer, for example, music files or videos, photos. Using the “Apply” option, we confirm the execution of actions between devices.

Once you have started the process, iTunes will prompt you to choose one option from several types of synchronization. In the first option everything iPad data will be replaced with the data available on the computer. Selecting the second option allows you to replace the data on your computer with the data on your tablet device. Well, by choosing the third option, you will allow the data from both devices to merge into a single whole.

In particular, if you are synchronizing data from a new or updated tablet for the first time, then choose the first acceptable option, in which all data from the PC will be transferred to the iPad. Well, if you are in doubt about choosing an option, then it is better to use the third option, then all data from both devices will be saved.

In the future, the tablet and this computer will synchronize and connect automatically, since it is important to synchronize correctly the first time, and then the devices find each other automatically not only when connecting them via cable, but also when connecting them via WI-FI.

The main condition for connection is the existence of communication between the synchronized devices via a USB cable, so never disconnect the cable if the data transfer process is running. Otherwise there may be software error which will have to be corrected.

Greetings. Today we will touch on a seemingly very simple and understandable topic - how to connect an iPad to a computer.

And in principle, not only the iPad, but any iOS device, fortunately there are ways to connect for everyone Apple gadgets the same.

So, there are two ways to connect the device to a computer:

  • USB cable. The “old-fashioned” method, the connection is simple connection iPad or iPhone to PC using the standard included USB cable. There is nothing complicated, just plug it in and go. But, in the advice section we will look at several modifications of the USB cable, and I will also tell you how to use it correctly;
  • Wi-Fi network. A more complicated, but not very complicated, variation of connecting the device to your computer. After necessary settings To connect your iPad or iPhone to the oven, just turn on wireless network Wi-Fi, it goes without saying that a Wi-Fi receiver should be on the computer.

Let’s not rant for too long, let’s start connecting the gadget to the computer.

USB cable

First of all, rummage through the box in which you purchased the device and find these two devices there:


On the left you can see the cable itself (iPad samples 1,2,3 and iPhone samples 1,2,3,4), and on the right is the power supply, cable 4(+) and iPhone 5(+) are located below. We throw (no, not out the window, just disconnect (if they are one whole) the two devices indicated in the picture: the cable and the power supply, we get it ready for using USB cord.

We take our device, look at its “back” and find a hole there; the higher the version of the device, the neater and smaller the “hole”. We take the cable and, brazenly, insert one end of it into the iPad or iPhone, do it carefully, otherwise you may damage something.

Connect the other end of the cable to the computer. After this, the program for managing your gadgets – iTunes – should automatically launch on your computer. If you don’t have the program on your computer, you can get it here -.

Wi-Fi network

Let's move on to the next connection option - connecting the device to the computer using wireless wifi networks. Here everything is a little more complicated than in the first case. Follow these steps:

  • To set up for the first time, connect your iPad or iPhone to computer at USB help cable;
  • If iTunes doesn't start automatically, you'll need to start it manually. No iTunes? Download here - link ;
  • Select your device in the sidebar ( side panel displayed when pressing the key combination CTRL+S);
  • Go to the “Overview” tab, go down to the very bottom of the page and check the box next to “Wi-Fi synchronization”.
Sync from device

Now, any time you want, synchronize your Apple device, you need to do the following operations:

  • Go to device settings;
  • Select “General”, then “Sync with iTunes over Wi-Fi”;
  • Click the “Synchronize” button.




That's it, now you know how

A person who purchased Apple products, and in particular tablets, may not know how to connect the iPad to a computer. You can synchronize your iPad only using a special program called iTunes. Despite the fact that its interface is clear and simple, connection can cause some difficulties. And at the first stages, synchronization seems to be a very complicated process.

The first items on the list of things that need to be done in order for the synchronization to be successful are no different from standard smartphone or tablet. Connecting an iPad is possible via a special USB cable, which is included with any phone and other products. The second method, which you almost never use, is to sync your device over Wi-Fi.

Features of connecting a USB cable

The process begins by inserting one side of the cable into your computer and the other into the device. If you need to purchase a cable, you should know that different generations, have various standards cable. For example, synchronization and connection to a computer is done using a cable with the Lightning standard, and the first three iPad models are made according to the 30-pin standard. The difference between these plugs is that the first type can be connected with either side, while the older type can only be connected with the marking facing up.

Then it starts manually or automatically special program iTunes, which allows you to synchronize your computer with your tablet. In order for the program to see the device, you do not need to take any action, you just need to select it in a special drop-down menu when starting, because iTunes launches everything on its own necessary drivers, which is why syncing your iPad is easy.

Launching iTunes

If the connection is made correctly, the “Autorun” window will pop up on the screen, in which you will be offered several actions to choose from. For example, such as: “Import images and videos”, “Copy photos to your computer and view them”, “Open the device to view files”, “Browse video files” and so on.

You can safely click the icon to launch the process you need, or simply close the Autorun window. Because after connecting the i-gadget to the PC, in parallel with “Autorun”, iTunes automatically loaded and opened. And now you can see its menu in front of you. By selecting the iPad icon, you can safely download games, music, movies and other useful multimedia fun things to your tablet via synchronization!

Connect iPad and PC via Wi-Fi

Now let's look at how to synchronize an iPad with a computer using a Wi-Fi network. This is done easily and quickly. It will take no more than two minutes. Connect your iPad to your PC. This is required for initial setup. With such a connection, this will no longer be necessary.

Go to iTunes. In the side menu on the left, select the name of your device. Having selected the iPad in the menu, click “Browse” and in the “Options” sub-item, check the “Sync this iPad over Wi-Fi” checkbox. Click on the “Apply” button.

With these steps you have completed the settings for future work in iTunes. Now you need to prepare the i-gadget itself for synchronization via Wi-Fi:

  • On your iPad, go to the “Settings” menu;
  • Select “Basic”;
  • Next “Synchronize with iTunes via Wi-Fi”;

In this menu, select the computer with which synchronization will take place and click the “Synchronize” button. Now, all the information that you have specified for synchronization will be transferred from your PC to your iPad. We omit the fact that for successful manipulations the computer must have a Wi-Fi router by default.

No connection between iPad and PC

Sometimes it happens that iTunes does not notice the i-device connected to the PC. Often, the problem is not as serious as it may seem. The reasons most likely lie in the following:

  • USB port;
  • USB cable;
  • iTunes;
  • Computer.

    • The described problems are solved as follows:

  • If iTunes does not connect to the iPhone due to a broken USB port, simply connect your i-gadget through another USB socket on the PC; if everything is fine with the port, try disconnecting other USB devices, leaving only your iPad connected;
  • Try using a new/functioning cable to connect;
  • Uninstall and reinstall the media player again for playback by downloading the latest version (naturally from the Apple website).
  • If the first three points did not help, try manipulating synchronization on another PC. Your computer may be causing the problem.

    • Well, if changing the computer did not bring the expected results, then the problem is really serious and you will have to deal with it Apple Mobile Device. And this is a topic for a separate article. We would be grateful if you leave a comment on this article.

    Videos worth watching on this topic:


    Apple has been known throughout its history for creating products that are easy to set up and start using right away. Nevertheless, many newly minted iPad owners Detailed instructions are required to start using the tablet. In this article we will tell you how to activate and configure the iPad the first time you turn it on using the most popular and simple options. Do not neglect the instructions and all the manipulations you carry out will only have a comfortable effect on further use gadget.

    First start

    So, here is the tablet in your hands, still completely new, perhaps in the factory film. It's time to stop admiring it, turn it on and start some basic setup.

    • To get started, just press the power key on the top end of the tablet. The display will light up and show you a greeting in several languages ​​at once. At this stage, the tablet will prompt you to press the “Home” button and continue setting up.
    • The next step is choosing a language and region. These parameters are independent of each other, so you can choose English language, while choosing Russia as the region.
    • Next, to set up and activate the iPad you will need an Internet connection. Select the Wi-Fi network and enter the password, if available, or click “Use” cellular network"if your iPad supports SIM cards. At this point, decide whether to turn on location services or not (you'll need them to determine your location, time zone, and the Maps app).
    • Then the tablet will offer to take care of the security of your data. You will need to provide a 6-digit password and configure Touch work ID. Simply place your finger on the fingerprint scanner (in the Home button) several times. The fingerprint can be deleted or changed in the future.
    • The next window allows you to recover data from backup copies or transfer them from another tablet. We need the “Set up as a new iPad” option.
    • To set up your iPad and make it fully functional, you'll need an Apple ID account. It allows you to sync data between multiple devices and includes features such as iMessage and FaceTime.

    To create an account you need to:

  • select the sub-item “Create a new Apple ID account”
  • enter date of birth
  • enter first and last name
  • then enter your email address or create a new one
  • invent and remember New Password For account Apple ID
  • select several test questions and enter the answers to them (you need to remember them, this data will be needed to restore access if you have forgotten your password)
  • Finally, we accept all the terms and agreements and wait until the activation is completed

    • Enter only real data or write it down somewhere, otherwise if your account is blocked, you will not be able to regain control of it.

    • The system will prompt you to activate iCloud. It's very convenient and secure storage data. WITH using iCloud You can sync messages, documents, photos and music. If you want to store all your data on your tablet, then disable this feature.
    • Next, the iPad will offer another protection method - the “Find iPad” function. This option will be useful to you if you forget your tablet in a cafe, it is stolen by an attacker, or it simply falls behind the sofa.

    Do not neglect the manufacturer’s advice and be sure to enable this function; it has saved more than one gadget around the globe.

    • Next stage - setting up Siri. Siri is a virtual assistant that helps you solve everyday problems using voice commands. Siri sends data to Apple company, so if you care about privacy, turn this option off.
    • The final step is diagnosis. Apple suggests sending anonymous device information to the company so that engineers can analyze the data received and improve the quality of the software.
    Activation using iTunes

    If your iPad does not support SIM cards, and there is no Wi-Fi at home, then you can activate the device as new using a computer and iTunes.

  • To do this, at the stage of connecting to the Internet, connect the iPad to the computer and launch iTunes.
  • Select the sub-item “Set up as a new iPad”.
  • Click the “Start Work” button and wait until data synchronization is completed.
  • Then we return to the iPad again and follow the instructions on the screen.
  • You can create an Apple ID and transfer media content directly from your computer.

    • In order not to transfer unnecessary information to a new device, cancel synchronization, select the necessary items and start synchronization again.

    Conclusion

    On this basic setup the gadget is finished. Next, fine-tuning will follow: connecting email, downloading applications from the AppStore, transferring photos, music, movies and other tasks. Using our step by step guide By iPad setup, you can activate the gadget without any hassle and start using it comfortably.
    

    2024 gtavrl.ru.